Sky
03-25-2005, 11:06 AM
Now this one has been around the block also. I think this case was not really appreciated. Alot of people thought it was a stock black case. It wasn't, that is custom high gloss paint that I did. Anyways, this case is sort of retired now. Its been in its share of magazines and at many different lans.
DeceptiMod. From the Transformers Armada theme. 2 blue CCLs. 4 Antec blue led fans. Vantec Rheobus. 3 window cut-outs. All with dremel. Hand done. All laser engraving done by me custom. Wire management done completly with heatshrink. Custom paint done with cheapo Krylon. About 10 coats total.
Soyo Dragon Platinum mobo
P4 2.4
GF4 Ti4200
60gig HD 8mg
SB Audigy
DVD writer
48x CDROM
480 watt TrueBlue PSU
Side view
http://www.relyks.com/crap/DeceptiMod4.jpg
Front view with engraving
http://www.relyks.com/crap/DeceptiMod5.jpg
Back side with cut-out and engraving. The paint appears rough and bumpy in the pic, but that is actually the reflection of the textured wall.
http://www.relyks.com/crap/DeceptiMod7.jpg
Top with etching and engraving
http://www.relyks.com/crap/DeceptiMod6.jpg
Gorgeous guts
http://www.relyks.com/crap/DeceptiMod1.jpg
Look at that wire managment
http://www.relyks.com/crap/DeceptiMod2.jpg
Close up of etching
http://www.relyks.com/crap/DeceptiMod3.jpg
My setup
http://www.relyks.com/crap/DeceptiMod.jpg
Close up of side cut-out
http://www.relyks.com/crap/DeceptiMod8.jpg
Another close up.
http://www.relyks.com/crap/DeceptiMod9.jpg
DeceptiMod. From the Transformers Armada theme. 2 blue CCLs. 4 Antec blue led fans. Vantec Rheobus. 3 window cut-outs. All with dremel. Hand done. All laser engraving done by me custom. Wire management done completly with heatshrink. Custom paint done with cheapo Krylon. About 10 coats total.
Soyo Dragon Platinum mobo
P4 2.4
GF4 Ti4200
60gig HD 8mg
SB Audigy
DVD writer
48x CDROM
480 watt TrueBlue PSU
Side view
http://www.relyks.com/crap/DeceptiMod4.jpg
Front view with engraving
http://www.relyks.com/crap/DeceptiMod5.jpg
Back side with cut-out and engraving. The paint appears rough and bumpy in the pic, but that is actually the reflection of the textured wall.
http://www.relyks.com/crap/DeceptiMod7.jpg
Top with etching and engraving
http://www.relyks.com/crap/DeceptiMod6.jpg
Gorgeous guts
http://www.relyks.com/crap/DeceptiMod1.jpg
Look at that wire managment
http://www.relyks.com/crap/DeceptiMod2.jpg
Close up of etching
http://www.relyks.com/crap/DeceptiMod3.jpg
My setup
http://www.relyks.com/crap/DeceptiMod.jpg
Close up of side cut-out
http://www.relyks.com/crap/DeceptiMod8.jpg
Another close up.
http://www.relyks.com/crap/DeceptiMod9.jpg