Lawnmower
02-17-2008, 01:39 PM
Hi everybody,
for the everybody that doesn't know me, I’m Henry (in english) and i’m fourteen, the project which I wanted to risk, as the name says the name, is the realization of an acoustic box inside which I will put the hardware of my pc from scratch ……….
…….. after almost one month of "ideation", I have begun to try to give form and measures to this "case" that will take then the name (thanks to the help of wolf) of SpeakeR Project.
At this point I didn't have to do anything else other than to pass to the real thing…….. but before beginning, I have decided to consult some people really kind and cordial and above all with a lot of experience that is: Lupo, Rigor, e _FAX_..........
Talk to you soon with the first updates!!!
Therefore, for first thing I had to make sure about count me some approximate encumbrances of the hw and, appraise the possible positions………after some study (really few) here is thing has come out!!!
http://www.italiamodding.it/site/uploads/photos/93.jpg
afterwitch, takings some measures, have marked the compensated by to cut…..
http://www.italiamodding.it/site/uploads/photos/94.jpg
and I have made a further test before beginning to cut…
http://www.italiamodding.it/site/uploads/photos/95.jpg
considering that it was all well, I have performed the cut……(don’t have the photos of the workmanship in how much the photo camera had a bead battery…)
http://www.italiamodding.it/site/uploads/photos/96.jpg
It’s time to cut the panels and to see the real dimension of this box!!!
http://www.italiamodding.it/site/uploads/photos/97.jpg
Here it is with the hw supported inside……..
http://www.italiamodding.it/site/uploads/photos/98.jpg
and here are the walls of the houses to glue………
http://www.italiamodding.it/site/uploads/photos/99.jpg
(you excuse for the photo un focused….)
http://www.italiamodding.it/site/uploads/photos/100.jpg
for the everybody that doesn't know me, I’m Henry (in english) and i’m fourteen, the project which I wanted to risk, as the name says the name, is the realization of an acoustic box inside which I will put the hardware of my pc from scratch ……….
…….. after almost one month of "ideation", I have begun to try to give form and measures to this "case" that will take then the name (thanks to the help of wolf) of SpeakeR Project.
At this point I didn't have to do anything else other than to pass to the real thing…….. but before beginning, I have decided to consult some people really kind and cordial and above all with a lot of experience that is: Lupo, Rigor, e _FAX_..........
Talk to you soon with the first updates!!!
Therefore, for first thing I had to make sure about count me some approximate encumbrances of the hw and, appraise the possible positions………after some study (really few) here is thing has come out!!!
http://www.italiamodding.it/site/uploads/photos/93.jpg
afterwitch, takings some measures, have marked the compensated by to cut…..
http://www.italiamodding.it/site/uploads/photos/94.jpg
and I have made a further test before beginning to cut…
http://www.italiamodding.it/site/uploads/photos/95.jpg
considering that it was all well, I have performed the cut……(don’t have the photos of the workmanship in how much the photo camera had a bead battery…)
http://www.italiamodding.it/site/uploads/photos/96.jpg
It’s time to cut the panels and to see the real dimension of this box!!!
http://www.italiamodding.it/site/uploads/photos/97.jpg
Here it is with the hw supported inside……..
http://www.italiamodding.it/site/uploads/photos/98.jpg
and here are the walls of the houses to glue………
http://www.italiamodding.it/site/uploads/photos/99.jpg
(you excuse for the photo un focused….)
http://www.italiamodding.it/site/uploads/photos/100.jpg