Project: Woody by zwiks

[zwiks]

http://www12.asphost4free.com/zwiks/1_mod_walk/000-Woody-by-zwiks-jpg.jpg

http://i209.photobucket.com/albums/bb185/zwiks/Computerland-Udkast-JPG.jpg

Hey my name is Mads R, and im 15 years old. Im comming for a little country called Denmark.
This is my first serious project, but i hope it is going to be cool.

I got the idea to the case in a woodwork lesson i had.. and i started immediately.

In the beginnign the hardware inside the case, isent that great, but that will change along the road.
Actruly i dont have alot of money , but i can assure you that it will be great.

The PC is going to be me main computer, cuz right now I only use my laptop.. not great.

THE ORIGINAL PROJECT-LOG: http://forums.bit-tech.net/showthread.php?t=144799

Here is some pictures.. [Remember im not done :P it needs some paint an a little bit of modding]


Before i started on the case i paintet the PSU:
http://www12.asphost4free.com/zwiks/1_mod_walk/01_Wood.JPG


Here is the "Donor-PC-case" i used.. heh it needs a vacuum-cleaing... alot:
http://www12.asphost4free.com/zwiks/1_mod_walk/2_Wood.JPG


I drilled a hole for the lille speaker:
http://www12.asphost4free.com/zwiks/1_mod_walk/3_Wood.JPG


Here is the front part of the PC: [Not done yet]
http://www12.asphost4free.com/zwiks/1_mod_walk/4_Wood.JPG


Here is the top part of the PC: [Not done yet]
http://www12.asphost4free.com/zwiks/1_mod_walk/5_Wood.JPG


Here is the right side part of the PC: [Not done yet]
http://www12.asphost4free.com/zwiks/1_mod_walk/6_Wood.JPG


Here is the left side part of the PC.. witch i needs a lot of grinding: [Not done yet]
http://www12.asphost4free.com/zwiks/1_mod_walk/7_Wood.JPG


Here is the backside of the right panel on the PC.. I cutted the "Metal-thing" out from the "donor-PC-case" i used [Not done yet]
http://www12.asphost4free.com/zwiks/1_mod_walk/8_Wood.JPG


Ups .. I pushet to hard... Now i have to cut a new piece:
http://www12.asphost4free.com/zwiks/1_mod_walk/9_Wood.JPG


I have to paint: [1st layer on the "metal-part]
http://www12.asphost4free.com/zwiks/1_mod_walk/10_Wood.JPG


Those to look nice together hehe: [The blitz on the camera i makeing a little "flash-thing" on the picture :S sorry]
http://www12.asphost4free.com/zwiks/1_mod_walk/11_Wood.JPG


Here are some new pictures, but remember i have to putty the cracks and paint it, + some grinding and modding:
http://www12.asphost4free.com/zwiks/1_mod_walk/PIC00142.JPG


http://www12.asphost4free.com/zwiks/1_mod_walk/PIC00144.JPG


http://www12.asphost4free.com/zwiks/1_mod_walk/PIC00145.JPG


http://www12.asphost4free.com/zwiks/1_mod_walk/PIC00148.JPG


http://www12.asphost4free.com/zwiks/1_mod_walk/PIC00151.JPG


http://www12.asphost4free.com/zwiks/1_mod_walk/PIC00153.JPG

More to come :D

[p0Pe]

i have been waiting for this one:) welcome to tbcs zwiks!

[zwiks]

Thank you p0pe :D heheh :D

[Luke122]

Looking good so far.. keep the updates coming. :D

[zwiks]

Yeah i will . maybe one more in 30 minutes-

[zwiks]

Hi guys,
its update time .. Here is the real deal:P


Jealous guys?? :P hehe:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00362_Wood.JPG

Do you see any ugly edge??:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00368_Wood.JPG

After i cut the new pice i started rasping the last edge "PYYH ! that was tough" heeh:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00375_Wood.JPG

And this is me doing the same thing:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00380_Wood.JPG

Some things is used:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00382_Wood.JPG

And now to the "putty-work:" (i think its called :D)
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00384_Wood.JPG

And some "paint-preparations" and sanding.. pyhh im glad its over: :D hehe :D
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00395_Wood.JPG

And some more:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00396_Wood.JPG

This is were i paint: (its my little-sisters play-house)
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00431_Wood.JPG

This is how the case looked like, after 2 layers of primer:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00432_Wood.JPG

This is how the case looked like, after 1 layer of paint:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00434_Wood.JPG

This is how the case looked like, after 2 layers of paint:
http://www12.asphost4free.com/zwiks/2_mod_walk/PIC00435_Wood.jpg

More to come :D

[Tavarin]

Looks like it's going to be a great case.
May I ask what kind of drill bit that is? I need something to make my fan holes and that looks perfect.

[Wag]

Man I love wood cases. Just can't get enough of 'em. Keep up the good work man.

[zwiks]

Its a 72mm homemade drill :D just the perfect diameter for 80mm fans :D

[zwiks]

Hi guys,
its update time .. Here is the real deal:P


First i cutted a pice of paper out, and painted it orange like the case: (Diden´t want that AC Ryan logo :D)
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00451_Wood.JPG

Using some tape:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00473_Wood.JPG

And painting:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00478_Wood.JPG

Have to paint this Orange like the case:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00481_Wood.JPG

Have to scrape the paint left overs:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00485_Wood.JPG

Scrape this off:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00486_Wood.JPG

Have to fix/paint this:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00488_Wood.JPG

Have to Cut off the red area:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00491_Wood.JPG

Now its done, and its a little bit wet.. but you get the idea:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00498_Wood.JPG

Here i used a nut, cuz i fittet perfectly, and it maked the "bay-tower" more stable..: (I used that metal-putty i just recived today, to make it fit together)
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00501_Wood.JPG

Here i maked a "angle-thing" .. also to make the case more stable:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00506_Wood.JPG

And one more:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00507_Wood.JPG

Here is the "wood-frame," without the "metal-frame"..: [The naked-wood needs to be black]
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00510_Wood.JPG

Here is the "metal-frame," without the "wood-frame"..: [It needs a paint-job very bad, I know it] [And some vacum-cleaning and so on]
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00513_Wood.JPG

More metal, which also needs a paint-job very bad, I know it
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00517_Wood.JPG

Here is a sketch i quickly made.. i shows the colo... arh forget it you know what it shows when you see it :D:D:D
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00520_Wood_Color.jpg

Here is after the painting .. (ist at the drying-fase)
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00526_Wood.JPG

Here is what it looks like:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00529_Wood.JPG

And one more:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00530_Wood.JPG

Ready for the paint-job:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00536_Wood.JPG

Yesterday I also painted the disc-drive, here is how it looks like:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00543_Wood.JPG

Yesterday I also painted the disc-drive, here is how it looks like now:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00544_Wood.JPG

Then I painted the "naked-wood" with a primer:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00548_Wood.JPG

And i had to assemble the dics-drive, here is the parts:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00557_Wood.JPG

This is the finished product.. I´m pretty happy with it:
http://www12.asphost4free.com/zwiks/3_mod_walk/PIC00565_Wood.jpg

[B]More to come :D

[Xperiment]

Great work, keep it coming!

[zwiks]

Hi guys,
its update time .. Here is the real deal:P

First i used PhotoShop to make a figure, and printed it out:
http://www12.asphost4free.com/zwiks/4_mod_walk/PIC00568_Wood.JPG

Then i cutted it out in some tape:
http://www12.asphost4free.com/zwiks/4_mod_walk/PIC00569_Wood.JPG

Here is what i used:
http://www12.asphost4free.com/zwiks/4_mod_walk/PIC00574_Wood.JPG

First one layer of black:
http://www12.asphost4free.com/zwiks/4_mod_walk/PIC00576_Wood.JPG

Then 3 layers of orange:
http://www12.asphost4free.com/zwiks/4_mod_walk/PIC00587_Wood.JPG

And here is what it looked like: (with the screw screwed in)
http://www12.asphost4free.com/zwiks/4_mod_walk/PIC00603_Wood.JPG

Here is how the "inner-wood-part" turned out, black:
http://www12.asphost4free.com/zwiks/4_mod_walk/PIC00615_Wood.JPG


More to come :D

[zwiks]

Thank you Xperiment . I will :D

[zwiks]

Hi guys,
its update time .. Here is the real deal:P

This picture was taken while the light and the beast was turned on:
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00617_Wood.JPG

And i turned off the light:
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00621_Wood.JPG

One more, with the light turned off:
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00625_Wood.JPG

And the light turned on, and the beast turned off.
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00626_Wood.JPG

A picture of the window in the beast.
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00641_Wood.JPG

A picture of the beast in another angle.
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00648_Wood.JPG

And with the side-panel taken off.
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00652_Wood.JPG

On this picture you can see the details i made on the "metal-part."
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00655_Wood.JPG

Here is a picture of the top.
http://www12.asphost4free.com/zwiks/5_mod_walk/PIC00664_Wood.JPG


PS. I will put black plexi in the side-window, and with no fan :D Just black plexi :D

And remember its not done yet :D

More to come :D

[Computer-Geek]

That looks so sick! +Rep

[vastonecat]

+ rep man thats a fine looking machine you built.

[zwiks]

Thank you guys ! :D I just love comments like yours :D

[p0Pe]

when am i going to see that case irl:D... lets have a little lan ;P

[zwiks]

good idea p0pe :D

[zwiks]

By the way, heres a MOTM poll my mod is a part of, and if you have a Bit-tech.net user, you can vote for me [If you like] Heres the link: http://forums.bit-tech.net/showthread.php?t=147717 :D:D:D

[Cheron]

I love your mod. but i have one Question aren't you afraid that when you put in new components. they over heat. like i try to say is he psu fan the only fan??? when you put in the black acrilic.

[zwiks]

Luquid-cooling is the answer... hehe

[zwiks]

http://i209.photobucket.com/albums/bb185/zwiks/n1.png
n1 :P

[FuzzyPlushroom]

Man, Woody's giving me a woody!

Awesome work - love that orange! Contrasts well with the blue. The "organic" shape of the window sets it off nicely as well, very unique.

[zwiks]

Thank you :D

[zwiks]

Heey guys , i know its been a while since the last update. I had a little "modding-breake" for a month or two, but i´m starting again soon :D