Imon VFD - modding to work externally??

[colincliff]

I have a small htpc case with only has 1 slimline note book optical bay.

I am looking to add vfd + remote control the the system.

I am interested in the imon vfd available here http://www.soundgraph.com/pr/e_pr_11.asp?m1d=1&m2d=11

Does anyone think that it would be possible to mod this unit so it can be used outside the case i.e. building a small box for it and running it from longer cables. I am hoping to get about 3-4 meters away from the case

The unit is connected by a usb cable and a m/board power cable. I think that the usb connection would be fine running on a usb extension cables from a powered hub, but i am not so sure about the m/board power cable.

Does anyone know what the maximum length a m/board power cable can be.

Bascially do you think this project will be possible!! Any help/ideas would be usefull!!

thanks

http://www.tomshardware.fr/images/jeux/20050708/liefer.jpg

[crazybillybob]

As long As your Connections Are good (Soldered) You will not have any issues with the Power Coble being As long as your USB cable (Remeber USB cables have a limit of 6' (about 2M)). Also you should be able to pick a smalle plastic box for the VFD @ Radioshack for less then $10us.



Good Luck,
Crazybillybob



"If Women don't find you sexy, They should at least find you handy!" -RED GREENE

[Xato]

There are problems with voltage drop over distances. But when working at these levels, you will have no problems.