View Full Version : Linking 3 Reservoir
sirkillalot617
06-04-2008, 11:44 AM
Hi Im planing watercooling and Id like to mount 3 of these on there side held above the top of my case so they catch the airflow from my exhaust fans how would I link them altogether so water enters at the back flows down throught to the third near the front before exiting.
http://www.xspc.biz/res150.php
Its many for athetics but I would also Like it to function.
thanks
taintedplay
06-04-2008, 12:12 PM
link dead
Lord Ned
06-04-2008, 12:27 PM
Can't you put the output from the first Res to the input of the second?
halcyonforever
06-04-2008, 12:31 PM
Yeah can't tell what kind of reservoir you intend to ues, but most likey it won't be too hard. Most good reservoirs have a built in system that direct flow from one end to the other to increase the cooling effect of the reservoir.
sirkillalot617
06-04-2008, 12:56 PM
Link should be fixed
halcyonforever
06-04-2008, 01:04 PM
basically you will need to make sure there is a hose that feeds from the far side to the reservoir to make sure it flows. What direction are you planning on mounting them.
sirkillalot617
06-04-2008, 01:07 PM
They will be laid flat on there side then placed with a gap of about 2-5 cms.
Powered by vBulletin® Version 4.2.1 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.