few questions

[taintedplay]

First off, is a mcr 320, a gpu block, cpu block, and a gtx black ice 240 and tons of tubing too much for a ddc 3.2 with the acetal top? if so, i was thinking of having one of the rads on the cpu with the blue cooling i have, and making the new pump and second raddy with like uv purple cooling to dual eachother or something. EDIT: Seems i got two accidently of the mcr 320s. So now i have two mcr320s, a black ice gtx 240, cpu block and soon gpu block and TONS of tubing. ALl on a ddc 3.2 with acetal top. Need a new pump dont i? if so whats a good one, hopefully for a little on the lighter side on my wallet

Second, when filling through a fillport to t line, how high do i fill it?

Do i turn on the pump and keep pouring once some gets in?

Last question: i got some new ballistix tracers but they dont have the clips. I thought the tracers kept the good old double sided but i guess not. Should i try to return them? I was wanting a set to match my old type tracers.

Sorry for all teh questions, thanks so much for any help

[taintedplay]

anyone?

[nevermind1534]

Can't really help you there, since I've never run water cooling.

[J-Roc]

If you going to be running a seprate loop for the cpu and another for the gpu then yes you will need another pump. You want a pump rated at 500 L/hr +/-50.

To fill the system: fill the system as much as possible then turn it on. Keep filling untill the system is full. I would say keep the fluid half way in the tube from the T to the fillport. Once system is full, let it run for about an hour or so to get rid of any air bubbles. Add more fluid if needed.


Cant help you with the ram.