PDA

View Full Version : Uv Paint



SaWBLaDe
11-07-2005, 07:00 AM
hey guys first off this is my first post here at TBCS so be gentle ;) Anyway i was palnning on painting the inside of my case with uv paint like this http://www.pccasegear.com/prod444.htm anyway by the looks of it, it looks very chalky and i was going for a glossy look so i was wandering if i used this paint then went over it with a clear coat (to shine it up a bit) from a spray can would it affext the uv paint at all? by the way the uv paint is waterbased. any help on the subjext you can provide would be great also if anyone has any other ideas on how to give it a glossier look would be good too. cheers SaWBLaDE. :)

Rankenphile
11-07-2005, 12:35 PM
I have not noticed a problem with it. I used spray-on ClearNeon UV paint, and the clearcoat seemed to work fine over it.

As always, however, do a test piece. Find a piece of scrap somewhere you can test it on if you are not comfortable doing it directly on your case.