Project : 5th gen - 20TB gaming rigs

[grevaeg]

Project : 5th GeN
Building a 29TB monster rig

Well... the time has come to yet again start on a new project, the old one just didnt fit my needs anymore, so decided to give it my all to build a awesome dual pc case, with a additional atom rig to run the upcoming touch screen =)

Anyways, have set some personal goals for this build


* 2 Mainboard spots
* Watercooled
* Removable harddrive rack
* Enough space for atleast 40 disks
* Good radiator
* Only use 250mm fans where its possible
* double PSU area
* Aluminium frame, welded
* Plexiglass exterior
* Silver and black finish, go for style
* Buildt in 2 sections, 1 for main pcs, 1 for radiator and atom PC

Sponsors!
http://ekwaterblocks.com/shop/images/oscommerce.gif (http://ekwaterblocks.com/shop/index.php)
Huge thanks to EK for awesome products and great prices =)

Stuff are still being planned, but have some decent ideas on what i want, and how i want it executed

Might as well start with the hardware list

PC1 :
Asus p5q Premium x48
Intel Core 2 Quad Q9550
4 GB OCZ Flex, pc 9200
Radeon 4870x2
1200w Thoughpower PSU


PC2 :
Asus P5K Premium - p35
Inte Core 2 Quad Q9550
4GB OCZ Flex, pc9200
Radeon 4870 - 1GB
1200w Thoughpower PSU

PC3 :
Intel Atom 1.6 ghz
Intel mITX d945gclf2
2GB OCZ, pc 5400
300w Chieftech PSU


Harddrives :
6 x : WD500GB, 7200rpm, IDE
16 x : WD500GB, 7200rpm, SATA
4 x : WD750GB, 7200rpm, SATA
4 x : WD1000GB, 7200rpm, SATA
2 x : WD1000GB, 7200rpm, E-SATA
4 x : SG80gb, 15000rpm, SAS

Får vel håpe å ha runda 20 TB før TG 09 =)


Watercooling :
Apogee GT cpu blocks
undecided on the rest (ideas?)


Concept - frame

Afraid i havent made a concept for the exterior of the case yet, but atleast have some plans for the looks on the frame itself, have allready been working on the case for a few days, so it didnt really turn out the way i though it would... a sudden burst of creativity came in the way for that part

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/backs.jpg


http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/fronts.jpg


http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/rightsides.jpg


http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/sliderss.jpg


http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/sliders2s.jpg

- Christer Grevæg

[grevaeg]

The water tank
Concept


http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/tank1.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/tank1l.jpg)
Would really love to have a watertank that can fill most of the front space of my upcoming rack, and create a nice waterfall effect, guess the total height would end up around 95x5x30cm some place

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/tank.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/tankl.jpg)
The main idea behind this one would be to cut out 40mm holes times 4 in a thick piece of plexiglass, get some rubber rings down there, mill out some space for em, and hopefully get it watertight. The water would travel trough drilled paths and enter / exit in the middle of the block on top and bottom. Plexi with that thickness can easily be mounted to the case too...

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/plexi.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/plexil.jpg)
Allready found a suitable block of plexi 50mm thick -.- god its heavy....
anyways, found a circular saw, and cut it into usefull pieces

[grevaeg]

The weld

Had the chance to do some welding the previous days, using a mig welder for aluminium, at high voltage, welding corners is a pain, the alu tend to melt in ways you dont want it to

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2172s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2172.jpg)
4 x 25x25x5000mm square profiles... a total of over 20 meters alu, this would be the base of the case

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2173s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2173.jpg)
After running them over the cutter, we got some decent cut pieces, in the lenghts required

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2176s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2176.jpg)
The amount of time this will take is probably endless....

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2175s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2175.jpg)
Had to get a few pics of the rig doing some of the work too =)

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2177s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2177.jpg)
The alu lined up and ready for welding

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2178s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2178.jpg)
Welding in action

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2180s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2180.jpg)
One part of the top part of the case done, NEXT!

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2181s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2181.jpg)
Second part all done and god to go

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2260s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2260.jpg)
First part of the welding done now, would need to get some sandpaper out , and some paint at some point

At the current state, will the top box be housing the radiator, the mITX, the touchscreen and some fans

Will also have to make some new "feet" between the top and bottom box

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_1969s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_1969.jpg)
Also got some perforated alu for the disk rack, more on this later

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_1972s.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_1972.jpg)
CPU block, mainboard holders and 10 250mm fans have arrived

[DonT-FeaR]

oh snap... this is going to be good.... where ya order the holders from??? lol this shall be great... welcome??? lol cant wait..

[grevaeg]

The radiator and the frame

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2433.jpg
Was able to get some fibersparkle(?) (stuff that gets hard after application)

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2434.jpg
Lotsa open ends in the alu, had to fill all of those up

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2435.jpg
Stashed in the "foam thingy" and sanded it proper to get a good surface for the upcoming paintjob

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2427.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2427l.jpg)
Decided to get a used radiator from some bike or something, partly for the looks, and partly for the killer performance these beasts can give compared to standard computer sized ones. Ended up with a radiator from a 94' mod GPZ 600, though, it needs some love to look good again...

So thought i should make a new shell for it, and spray paint it so it can look somewhat fresh again

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2425.jpg
Perfect! this plate looked to be great regards to what i was looking for

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2426.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2426l.jpg)
Cut it in proper lenght, found a steel tube, and bended it

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2428.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2428l.jpg)
And there we go... a somewhat better looking radiator

The fans

After alot of thinking did i decide to go for 250mm fans for the radiator, these are low noise, push lotsa air, and looks awesome =)

Would also need to pair em up, to ensure that one pair is allways on when one of the computers is shut down... so each comp will be fitted with 2x 250mm for the radiator

Had some 10x10x1mm alu around in the shop that i used for the framework

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2436.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2436l.jpg)
2 fans tightened up

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2437.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2437l.jpg)
First pair done

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2438.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2438l.jpg)
Second pair done

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2439.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2439l.jpg)


http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2440.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/img_2440l.jpg)
And finally, mounted up on the radiator and into the pc frame

[grevaeg]

The harddrive rack and progress pics

The rack will be build up with steel plates as place holders, self drilling steel bolts, perforated alu for holders, and rubber feet thats isolating vibration. This should ensure a stable , flexible and silent foundation for the disks


http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2450.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2450l.jpg)
Bought in a steel plate with 3mm thickness for the base of my harddrive rack, steel can take ALOT more weight then alu, so its proper for this kind of use. Cut it up in the size needed and measured up the holes for the harddrive "slides"

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2446.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2446l.jpg)
Cut up some square alu to fit my needs

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2445.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2445l.jpg)
Attached them to the plate

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2447.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2447l.jpg)
And added a plate in front to keep the upcoming sideplates in place

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2452.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2452l.jpg)
Mounted up with vibration isolating feets

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2449.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2449l.jpg)
Top and bottom holder all ready to use, they are using 6mm bolts to keep them in place

http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2451.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2451l.jpg)
http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2453.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2453l.jpg)
Cut out the plates for the drives, and fit em in the sliders, these should ensure decent air flow, and enough possibilities to get some disks in there


--progress pics--

This is the current progress pics


http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2455.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2455l.jpg)
-------------------------------------
http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2456.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2456l.jpg)
-------------------------------------
http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2457.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2457l.jpg)
-------------------------------------
http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2458.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2458l.jpg)
-------------------------------------
http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2460.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2460l.jpg)
-------------------------------------
http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2461.jpg (http://www.spinnin-wheel.com/images/stories/kart/christersin/2008/25/img_2461l.jpg)

Next update will come on thursday if everything goes by the plans, have 6 square meters of plexi coming in the shop about then =) thx for reading

[SXRguyinMA]

this thing looks crazy! I can't imagine what all those HDDs cost :?

[grevaeg]

0.13$ a gig i would believe =)

[SXRguyinMA]

thats purely redonkulous my friend :eek: 8)

[SgtM]

0.13$ a gig i would believe =)

That's about $2600 in case you're wondering.

[SXRguyinMA]

yep, figured that out, hence the "redonkulous" comment :D

[p0Pe]

hah.. i would sell all of the smalle ones and go for 1 tb´s instead:P
looking nice (and insane space!)

[DonT-FeaR]

thats... MASSIVE ... man thats huge... nice work..

[The_Crippler]

Where'd you lay your hands on the perforated aluminum?

+Rep

[The boy 4rm oz]

A true monster. Good luck with your build. Looks fantastic so far.

[985323]

WOW looks amazing cant wait to see more

[grevaeg]

Small update =)

The mITX system has just arrived for the touchscreen, this one will be mounted in the top box and will only be used on the touch. Gonna be sweet to run torrents, remote playlists and media server on, gonna stash in 2gb ddr2 in it too, and install vista or something :P


Have also ordered another 6 250mm fans for the case, totalling out on 10 250mm fans in the case

speccs :

* Mini-ITX form factor 12cmx12cm
* Dual Core Intel Atom processor 1.6ghz
* one 240 pin DIMM socket supporting 533/667MHz single channel DDR2 up to 2GB in size
* Intel 945GC chipset: 82945GC Northbridge with integrated graphics
* GMA 950 integrated graphics
* S-Video output via Chrontel CH7021A SDTV/HDTV encoder
* RealTek ALC662 codec with HDA and 6 channel audio
* SPDIFF header on motherboard
* one PCI slot
* 8 USB2.0 ports (4 on back panel, 4 on two headers)
* one IDE interface
* two SATA2 interfaces
* one VGA connector
* one S-Video port
* one parallel port
* one serial port
* PS/2 keyboard and mouse ports
* Intel BIOS with SMBIOS support, Rapid BIOS boot, Express BIOS Update
* Gigabit Ethernet
* ACPI support, Wake on USB, PCI, PS/2, Lan
* supports Windows Vista Home Basic, Windows XP Home and Pro, 32 bit and 64 bit


http://i.neoseeker.com/neo_image/161496/article/D945GCLF2_atom_330/mb2_thumb.jpg

http://i.neoseeker.com/neo_image/161492/article/D945GCLF2_atom_330/boxf_thumb.jpg


CHIEFTEC PSU 300W SFX m-ATX12V 2.0 for P4 with active PFC
http://www.gerakaina.lt/new/images/gnt_380360.jpg


Did also find a 300w power supply to power it up, its not using more then 60ish watt though, so its somewhat overkill... sizes up to 12x15x6cm



The plexiglass has arrived too... =)

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2474s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2474.jpg)
Over 6 square meters in total, god its gonna be a large build ^^

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2475s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2475.jpg)
started cutting out the plates with my air dremel and circular saw...

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2496s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2496.jpg)
Allmost done plating the top box now, the screen is also in place, more about that one later :P

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2497s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2497.jpg)
The current windows will be fine cut later on, and get a clear coat of plexi inside, with spacers between, just to get some air in there

--the touch screen--

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2501s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2501.JPG)
All plated up, and taped to the plexi to measure where to put the screen holders and mount

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2500s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2500.JPG)
images...

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2503s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2503.JPG)
cut up a few alu profiles to make the mount, tightened up with self drilling screws

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2487s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2487.JPG)

--HTPC, miniITX--

Well... as i said earlier, the mITX is in the house ^^

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2498s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2498.JPG)
More perforated alu, cut out, ready for mobo mount


http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2477s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2477.JPG)
The psu was in standard greyish metallic finnish, brushed it down and painted it in a more suitable colour


http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2476s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2476.JPG)
The mobo mounted up with rubber rings and m6 bolts, should ensure that it wont get in touch with the rest of the mobo plate


http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2486s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2486.JPG)
the backside


http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2485s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2485.JPG)
And the PSU mounted up in the bottom


http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2493s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2493.JPG)
Havent been able to get my cable sleeves yet, so taped it up for now, just to see how it would fit in there, and to be honest... its a perfect fit ^^ gonna need to make some external USB ports for it though....since the pc will be total enclosed in the top box, invisible behind the black plexi plates


--status images--


http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2499s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2499.JPG)

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2488s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2488.JPG)

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2479s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2479.JPG)

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2480s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2480.JPG)

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2505s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2505.JPG)

http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2478s.jpg (http://www.grevaeg.com/images/case08/update210/425CANON/IMG_2478.JPG)

That should be it for this time, the case is now ribbed down, all plates taken off, all holes needed drilled, and off to the car paint shop for a final touch of paint to make it look sweet :P

[grevaeg]

hah.. i would sell all of the smalle ones and go for 1 tb´s instead:P
looking nice (and insane space!)

Well... that would just result in less space, no? :P

You would need to sell atleast 3 500gb disks to afford 1 on a terra... as long as its space, enough controllers, why bother ^^

Its gonna be raided to hell anyways, and .... 2 500gb disks perform better then 1 single

Ill get there some day, but the price pr GB havent been good on the terra disks before now...

[grevaeg]

Where'd you lay your hands on the perforated aluminum?

+Rep

The perforated plates have been bought at my local "platesmith" or whatever they would be called... people thats soldering copper for house fasades and doing ventilation construction

[The boy 4rm oz]

Cool man, nice progress. I like how you are using the 23cm?? fans for maximum airflow for minimal noise.

[grevaeg]

New update guys ^^

Dont have time for the writeup right now though, anyways, heres some progress images :P

http://www.grevaeg.com/images/case08/update1310/IMG_2642s.jpg (http://www.grevaeg.com/images/case08/update1310/IMG_2642.JPG)

http://www.grevaeg.com/images/case08/update1310/IMG_2643s.jpg (http://www.grevaeg.com/images/case08/update1310/IMG_2643.JPG)

http://www.grevaeg.com/images/case08/update1310/IMG_2644s.jpg (http://www.grevaeg.com/images/case08/update1310/IMG_2644.JPG)

http://www.grevaeg.com/images/case08/update1310/IMG_2645s.jpg (http://www.grevaeg.com/images/case08/update1310/IMG_2645.JPG)

http://www.grevaeg.com/images/case08/update1310/IMG_2650s.jpg (http://www.grevaeg.com/images/case08/update1310/IMG_2650.JPG)

http://www.grevaeg.com/images/case08/update1310/IMG_2651s.jpg (http://www.grevaeg.com/images/case08/update1310/IMG_2651.JPG)

[grevaeg]

http://www.grevaeg.com/images/case08/update2010/IMG_2794s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2794.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2795s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2795.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2796s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2796.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2797s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2797.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2798s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2798.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2799s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2799.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2800s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2800.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2801s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2801.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2802s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2802.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2803s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2803.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2804s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2804.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2805s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2805.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2806s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2806.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2822s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2822.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2823s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2823.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2807s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2807.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2808s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2808.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2809s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2809.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2810s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2810.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2811s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2811.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2812s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2812.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2813s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2813.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2814s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2814.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2815s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2815.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2816s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2816.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2817s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2817.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2818s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2818.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2819s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2819.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2820s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2820.JPG)

http://www.grevaeg.com/images/case08/update2010/IMG_2821s.jpg (http://www.grevaeg.com/images/case08/update2010/IMG_2821.JPG)

[grevaeg]

http://www.grevaeg.com/images/case08/update2110/IMG_2825s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2825.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2826s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2826.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2826s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2826.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2827s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2827.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2828s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2828.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2829s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2829.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2830s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2830.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2831s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2831.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2832s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2832.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2833s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2833.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2834s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2834.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2835s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2835.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2836s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2836.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2837s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2837.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2838s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2838.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2839s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2839.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2840s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2840.JPG)

http://www.grevaeg.com/images/case08/update2110/IMG_2841s.jpg (http://www.grevaeg.com/images/case08/update2110/IMG_2841.JPG)

[SXRguyinMA]

insane :up: is that paint or powdercoat? looking awesome!

[ContraptionMaker]

This thing looks awesome dude! Do you plan on two keyboards/mouse or will you use a KVM switch for individual computer control? Better yet how bout setting them up in a cluster config. That would make one powerful system! Can't wait to see the finished project.

[KiLLERMAN21]

Looking good. Keep it up, you've got alot of work infront of you :P

[The boy 4rm oz]

Very nice orange paint, looks very striking. I am really like your plexi work. Fantastic progress so far.

[AMD Killa]

i love how this project is turning out, cant wait to see the finished thing!!

[p0Pe]

looking good man:D that case is huge!

[DonT-FeaR]

i was talking to killer man the other day on the phone and he said u painted it orange and i was like eww.... lol but thats a mighty fine orange... very nice

[grevaeg]

Guess its time for a update again ^^

Been working the past couple of days with the exterior of the case, guess we will let the images speak for themselves ^^.

Looking forward to getting all the hardware in there and get it fired up, and its all closing in really fast now, just a couple of days work left, and this project can be concluded :P

Whats been done :

* Sanded down the edges of the window cuts
* Added rubber seals under all the plates
* Sanded down the bottom alu plate
* Removed safety foil on the plexi
* Finished the front of the comp

What's left :

* hardware :P
* watertank
* cable management
* decals
* watercooling

http://www.grevaeg.com/images/case08/update2810/IMG_2929s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2929.JPG)
Rubber bands for vibration isolation on the sideplates and plexi in general, used well over 10 meters in total on the case

http://www.grevaeg.com/images/case08/update2810/IMG_2930s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2930.JPG)
Also got ahold of some vibration dampening pads to make sure the pump got as much isolation as possible

http://www.grevaeg.com/images/case08/update2810/IMG_2931s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2931.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2932s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2932.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2933s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2933.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2934s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2934.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2935s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2935.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2936s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2936.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2937s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2937.JPG)
Have to do something about these... they look like ****... -.-

http://www.grevaeg.com/images/case08/update2810/IMG_2938s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2938.JPG)
Replaced em with coned bolts


http://www.grevaeg.com/images/case08/update2810/IMG_2942s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2942.JPG)
Cut up a 2 cm plexi plate sanded it and glued it over the other plate, to conceal the bolt holes, turned out quite nice imo ^^

http://www.grevaeg.com/images/case08/update2810/IMG_2939s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2939.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2940s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2940.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2941s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2941.JPG)


http://www.grevaeg.com/images/case08/update2810/IMG_2943s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2943.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2944s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2944.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2945s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2945.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2946s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2946.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2947s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2947.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2948s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2948.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2949s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2949.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2950s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2950.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2951s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2951.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2952s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2952.JPG)

http://www.grevaeg.com/images/case08/update2810/IMG_2953s.jpg (http://www.grevaeg.com/images/case08/update2810/IMG_2953.JPG)

[grevaeg]

insane :up: is that paint or powdercoat? looking awesome!
Its powdercoat indeed, 1 layer orange, 3 layers clear


This thing looks awesome dude! Do you plan on two keyboards/mouse or will you use a KVM switch for individual computer control? Better yet how bout setting them up in a cluster config. That would make one powerful system! Can't wait to see the finished project.
My ladie will be using one of the comps, and ill be using the other, so it will rather just be signal cable extentions :P


Looking good. Keep it up, you've got alot of work infront of you :P
Thanks dude, and yea, just half way there


Very nice orange paint, looks very striking. I am really like your plexi work. Fantastic progress so far.
Was a bit sceptic at the colour at first too, but it turned out quite ok imo


i love how this project is turning out, cant wait to see the finished thing!!
Hah, cant wait either ^^


looking good man:D that case is huge!
thx :twisted:


i was talking to killer man the other day on the phone and he said u painted it orange and i was like eww.... lol but thats a mighty fine orange... very nice
Pffs.... wasnt that bad colour? :P

[The boy 4rm oz]

She is looking mighty fine mate, very tall, a real monster.

[x06jsp]

Seen this over at bit-tech and must say i love it :D what are your overall dimensions of this beast?

I think this may actually be catching my mod up for size :D (modularis evolution)

Josh

[grevaeg]

measured it up to a staggering 149x65x32cm, its about a nosetip shorter then my girl :P

[grevaeg]

Just got a mail from EK Waterblocks!

They will be providing me with Waterblocks to a discount price for this project ! So the order has just been placed for the following

EK-FC4870 X2 - Acetal CF
http://ekwaterblocks.com/shop/images/4870X2-Acetal.jpg

High performance VGA water block for the Radeon HD 4870 X2 series refference design graphic cards. Base is made of electrolytic copper. Top is made of quality POM Acetal. Back ram heat sinks are made of black anodized aluminium. The sealing is preformed by quality rubber washer. Block is mounted with enclosed M3 screws.
Mounting mechanism and fittings are included in price!

Fittings can be used on both side of the block (up and down), the 2 plugs are enclosed!

Technical data:
- dimensions of copper base: 206 x 118,5 x 7,5mm
- dimensions oftop: 207 x 119,5 x 8mm
- threads: 4 x G1/4
- fittings size: optional
- weight: 970 g



EK-FC4870 CF - Acetal
http://ekwaterblocks.com/shop/images/EK-FC4870-Acetal.jpg

A Full cover block for Radeon HD 4870.

High performance water block for Radeon HD4870 reference graphic cards.

Base is made of electrolytic copper. Top is made of quality POM Acetal material. Mosfet alu cooler is made of black anodized aluminium. The sealing is preformed by quality rubber washer. Block is mounted with enclosed M2,5x6mm and M2,5 x 4mm screws.
Mounting mechanism and fittings are included in price!

Fittings can be used on both side of the block (up and down), the 2 plugs are enclosed!

Technical data:
- dimensions of copper base: 118,5 x 112 x 8mm
- dimensions of POAM Acetal top: 119,5 x 113,5 x 8mm
- threads: 4 x G1/4
- fittings size: optional
- weight: 556 g

http://ekwaterblocks.com/shop/images/oscommerce.gif (http://ekwaterblocks.com/shop/index.php)
Huge thanks to EK =)

[The boy 4rm oz]

Nice blocks Ek make. You they aren't giving you the blocks, just a price discount? Either way congratz mate.

[grevaeg]

hehe, the total list of watercooling stuff needed got a bit too long for a giveaway :P

But getting a solid price reduction

[mittelmeier]

Looking nice. The first time I saw the orange I like it but wasn't sure how it would look done since the case was so big but now that you have the black on there I think it was the best color you could've used. +rep

[DonT-FeaR]

very cool nice work man

[grevaeg]

Hi all!,

One of those really large updates are finally coming along :P

Been working for 16 hours straight today on this project, so gotten a long way now...

Whats been done
* Finalized water res
* Allmost done with backplates
* Mounted disks and some hardware
* Soldered power circuits and LED's
* Installed Windows on mITX


Whats left
* Get the hoses and mount them up
* Install waterblocks on GFX cards
* Install new mobo
* Install watercooling and water ress
* Install fillport
* Boot it up ^^.




The harddrive rack


Guess this will be the start of stuffing disks in this case =)

Had previously powder coated 4 perforated plates to deal with this one, the disks got tilted somewhat upwards to prevent heat to be trapped in between them... Still have to put down a placeholder in the front of them though, so they dont slide out when the case is being moved, might get some screws and just drill holes and mount them that way too, oh well... ill figure it out

Got about 32 disks in place now, just missing out on 4x 80GB SAS (15k rpm) drives now, and a additional 2x 1TB drives that havent yet arrived, totals out on 22TB when everything is in place, over a total of 40 disks

http://www.grevaeg.com/images/case08/update0711/IMG_3261s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3261.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3262s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3262.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3263s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3263.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3264s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3264.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3271s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3271.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3272s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3272.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3283s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3283.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3279s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3279.JPG)
Added another 2 disks to the mITX board, 2x 500GB WD - One at the top.....

http://www.grevaeg.com/images/case08/update0711/IMG_3276s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3276.JPG)
And one at the bottom :P



The water-ress


It was decided early on that i wanted a large tank up front of the case, however, its been a real pain getting this one made, afraid i didnt have a camera available at the buildprocess but ill try and shorten it down here....

First of all, cut off a few pieces of a large plexiblock i had available, then i milled up 4 holes for the water cylinders, and made a 3mm opening inside the block for the o-ring, that would seal them up...

A normal drill was used to get the water paths within the blocks and locked up by a m8 bolt with sealing tape on it in the end, to ensure it doesnt leak....

However, needed some way to get the water down there, since sideway mounting nipples wont happen :P drilled up two holes on the top and the bottom, centered up within the block to ensure even flow of the water... and nippled em up with o-rings at the bottom...

http://www.grevaeg.com/images/case08/update0711/IMG_3265s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3265.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3266s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3266.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3267s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3267.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3268s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3268.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3269s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3269.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3270s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3270.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3273s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3273.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3274s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3274.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3275s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3275.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3292s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3292.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3293s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3293.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3291s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3291.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3300s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3300.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3301s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3301.JPG)




Fixing up the backplate


Time to do something about the plain look of the backplates on the case =)

As you probably noticed, the other 2 radiators have also arrived, so needed some way to get em decent looking (still need fans and grills though) -.-

Started by measuring up the size of it, cut out a piece in cardboard to check out if it checked up... Went further on with measuring up the plexiglass, and got on with the cutting job.. Gotta love jigsaws.... the results doesnt allways turn out like you want them to... so will have to file down some edges on these soon, but have way to much stuff to do to sit down and do that now :P

So will be a furter update on this one later

http://www.grevaeg.com/images/case08/update0711/IMG_3214s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3214.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3215s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3215.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3216s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3216.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3217s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3217.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3218s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3218.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3219s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3219.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3220s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3220.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3221s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3221.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3222s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3222.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3223s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3223.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3224s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3224.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3225s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3225.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3284s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3284.JPG)
Snuck in some pics of the thoughpowers along with the two radiators mounted up :P

http://www.grevaeg.com/images/case08/update0711/IMG_3285s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3285.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3286s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3286.JPG)

[grevaeg]

Soldering and LED's

God, this had been a time consuming affair...

Bought up 90x LED's - Blue, received them last week, and today, finally ready to start getting them up running, also had to do alot of cable soldering to power up the rest of the fans and leds on the case...

All the light's and some of the fans are directly connected to the 300w PSU for the mITX now

Anyways, guess u guys have decent insight in how this work's so ill let the pics speak for themselves =)

http://www.grevaeg.com/images/case08/update0711/IMG_3287s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3287.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3288s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3288.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3289s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3289.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3295s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3295.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3296s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3296.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3297s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3297.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3298s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3298.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3299s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3299.JPG)



Hardware

Ah well, a small chapter for itself... Sadly my "old" Abit Quad GT had to be replaced since it werent to happy about running 2x sas controllers for some reason -.-

So ordered up another Asus P5Q premium, should get this one sometime next week

Heres some current pics though of some of the hardware going in there... god i hate full memory cards when ur taking pics -.- so got somewhat limited this time

Also.. the hoses and waterblocks from EK-Waterblocks should arrive the upcoming week! damn, im looking forward to those, starting to close in on completion, FINALLY

http://www.grevaeg.com/images/case08/update0711/IMG_3211s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3211.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3212s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3212.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3213s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3213.JPG)



The touch

Windows Vista Ultimate x86 - Installed!

Working flawless, need to get some holes for USB ports so it can be easily reached, and install the touch software for it, then its all good to go... And no... the pics aint taken upside down :p

Mounted the screen upside down so the buttons on it wouldnt show when you stand looking at it, its easily rotated in windows, so it was a better solution this time around, since the buttons are so far up on the screen it just wouldnt look good having them popping out, believe i had some wierd cam settings too, the screen is not that white... hmmz...

http://www.grevaeg.com/images/case08/update0711/IMG_3280s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3280.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3281s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3281.JPG)

http://www.grevaeg.com/images/case08/update0711/IMG_3282s.jpg (http://www.grevaeg.com/images/case08/update0711/IMG_3282.JPG)

[DonT-FeaR]

:O amazing

[nevermind1534]

That's a lot of hard drives.

[DonT-FeaR]

ye i rkn... jees........ love the res and the hdds man,.... very cool

[gamer_from_aust]

love it, do you have like a endless budget?

[The boy 4rm oz]

OMG at the HDD racks. The res looks awesome mate, looking very cool. Do you have any support for the HDD's besides the mounting screws? It would be wise to make one, the are both very long, not to mention heavy. Just a bar that they can rest on would do.

[KiLLERMAN21]

Thats one helluva harddrive rack, nice.

[DonT-FeaR]

lol im still shaking my head at how big that is and how much it would of cost...

i will be for a while im sure...

[jdbnsn]

OMG! That looks so fabulous!

[drag.n.drop]

Wow, thats one epic looking case, i love the res

[grevaeg]

Hey guys!

Cleaned up the thread a bit, sorted the pics, and added some text and reflections, should make it a bit more understandable


:O amazing
:redface:


That's a lot of hard drives.
And more to come! ^^ still missing 6 disks from that pic my friend


ye i rkn... jees........ love the res and the hdds man,.... very cool
thx m8, hope it will work decent too


love it, do you have like a endless budget?
Not endless, but its decent, spendt around 11,000$ in total on case with hardware, and no... i dont wanna buy a car instead... :P


OMG at the HDD racks. The res looks awesome mate, looking very cool. Do you have any support for the HDD's besides the mounting screws? It would be wise to make one, the are both very long, not to mention heavy. Just a bar that they can rest on would do.
Coming up soon, will put a bolts in there too, to hold everything in place... its close to 30kg just in disks, its HEAVY...


Thats one helluva harddrive rack, nice.
thx =)


lol im still shaking my head at how big that is and how much it would of cost...

i will be for a while im sure...
Money is just related to where you tilt them :P one direction or another 0.o

Everything worth doing is worth overdoing ^^


OMG! That looks so fabulous!
*blush* thx dude =)

[mittelmeier]

Wow! This is an amazing build. That res is phenomenal and the HDD cages are insanely huge. +rep

[The boy 4rm oz]

I actually meant to write "PSU's" but the HDD's are heavy lol.

[phen0m]

Do you have any more pics of the whole computer?
And, god I wish I had thousands to blow on a computer :O

[DonT-FeaR]

11g..... omg... i have spent like 2500 on mine... and thats with likw 2100 on system and screen

[The boy 4rm oz]

11g is a lot lol, but you have more than one PC running in there tough, don't you? My PC is insured for 5g, if I paid RRP for all my tech when I got it it would be worth around 3.5g (including software). Gotta love that extra headroom lol.

[DonT-FeaR]

lol

yeah i spose 2 systems does double he proce if not triple...

[grevaeg]

Price estimation would be something like this =)

2 nicely specced gaming comps - 3000$ish
22 TB of drives is another 2800$
raid controllers close up to a decent 1800$ too...
4x 24" LCD's - 2000$
plexiglass cost around 100$ a square meter over here - 600$
Watercooling - 600$
Aluminium and other stuff 300$

and thats without the work included =)

[The boy 4rm oz]

That is a lot lol, well worth it though.

[phen0m]

^agreed.

The most I could ever hope to spend on one of my computer is a sad 1G though :[

[DonT-FeaR]

wow thats alot of stuff man... 4 24" screens :)

[grevaeg]

Small update guys,

Just received my second P5Q Premium and the GFX waterblocks from EK today, in addition to 6 meter of tubing :P

Guess the waterloop will be something like this :

water ress --> pump--> radiator 1--> gfx 1--> CPU 1--> radiator 2--> gfx 2--> CPU 2--> radiator 3 --> ress again

More pics to come in a few days

[KiLLERMAN21]

Damn man, thats alot of watercooling gear. How much?

[DonT-FeaR]

i would but another pump in there myself... but hey thats alot of stuff already

[grevaeg]

i would but another pump in there myself... but hey thats alot of stuff already

Read up the speccs on the pump my friend =) It can lift water 3,4 meter vertical, and pumps a decent 960 l/h, thats more then most other pumps in dual mode

Iwaki MD15R

18 x 9 x 7,5 CM (LxHxB) , 1500 gram , 30 / 10 Watt, 960l/h, lifting height 3,4 meter, 1/2 fittings

[DonT-FeaR]

fine do that then :) lol sorry bout that ...

[grevaeg]

hah, keep them coming dude =)

Love all input i can get, so dont worry about that, ok? I would buy another pump if i had the funding for it, but the current one cost a decent 250$ (damn japanese import -.-)

Water flow
http://hardware.no/artikkelbilder/25542/picssml/res_flow.PNG

Height (meters)
http://hardware.no/artikkelbilder/25542/picssml/res_bar.PNG

[DonT-FeaR]

wow 250 bucks...

whats the second graph??

[grevaeg]

edited up now =)

I dont dare to put a lower quality pump in this setup, if it breaks down, hardware for lotsa money get lost :P

[DonT-FeaR]

yeah true that... wanna make it bullet proof for the cash your spending

[nevermind1534]

wanna make it bullet proof for the cash your spending

Just order some 1" plexi. That should make it bullet-proof.

[grevaeg]

Ey guys, small update coming up :P

Plans for the day:

* Fix fittings on top radiator
* Get waterblocks on the gfx cards
* Mount up the 2nd mobo
* Mount up waterblock on mobo
* Start hosing up :P
* Hopefully get comp booted for a test run
* Check water ress - Water tightness
* Fix full size alu plate on the side for easy transport, without doing damage to the plexi

[KiLLERMAN21]

Woo, cant wait for those updates.

[DonT-FeaR]

sweet cant wait man,... good to hear from you

[grevaeg]

Sorry about the lack of updates lately guys... blame WoW : wrath of the lich king -.-

[grevaeg]

Did some closed loop tests today... one of the 240mm radiators is leaking, have to pick up a new one tomorrow -.-

Pics to come some time about then too :P

[DonT-FeaR]

thats a pitty.. bad luck mate.

[mittelmeier]

Bad luck about the radiator. Can't wait to see the pics.

[grevaeg]

A new couple of weeks has gone by, and its time for a update again

Havent been able to do alot lately much because of the arrival of wrath of the lich king -.- god i hate that game and the destruction it causes to normal life tasks... Anyways, had a few hours to get some work done again

Whats been done
* New radiators mounted up
* Watercooling in place
* Water ress pressure tested
* Second mobo in place
* EK Waterblocks fitted on 4870 and 4870x2 cards

Whats left
* Case etches, decals
* Cable management
* Get more coolant
* Get lighthing proper
* Fix LEDS
* Fit power buttons
* Fit DVD/RW slimline drive
* Boot it up
* Take some final pics and video of ress in action

The radiators - LEAKING

Last week had lots of frustration in it, when i finally mounted up the watercooling for a test run, it appeared that not one, but TWO radiators were leaking, the large one on the top, and a 240mm radiator at the bottom...

Had to order new ones

http://www.grevaeg.com/images/case08/update2011/IMG_3494.JPG
2x Mist 360 and 1x Mist 240 radiators ordered up with 1/2" nozzles

http://www.grevaeg.com/images/case08/update2011/IMG_3495.JPG
Unwrapped and good to go

http://www.grevaeg.com/images/case08/update2011/IMG_3496.JPG
Cut out a fitting piece of plexi to hold the double radiators together, ill get some etches on the plexi at a later stage

http://www.grevaeg.com/images/case08/update2011/IMG_3497.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3498.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3499.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3500.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3501.JPG


The watercooling

All of the hoses are now mounted up, and i have done a 24h test run to ensure that its no leaks with a closed loop... the noise level of the pump is just awesome, gotta love full magnetic driven rotors =)

Used 1/2" hoses all the way, with coils at some points to allow bending in steeper angles, also had to fetch a full 24 hose clamps to seal it all up, got clamps thats acid and rust ressistant , and they look somewhat shiny :P

Also got a few liters of Motocool coolant in there, this is a solution that prevent damage to any material, and its temperature ressistant between -54c and up to 135c

Hopefully able to get some temp checks when i get this one booted up, shouldnt be much of a problem to keep it all cold though

http://www.grevaeg.com/images/case08/update2011/IMG_3502.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3503.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3504.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3505.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3506.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3507.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3508.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3509.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3510.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3511.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3512.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3513.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3514.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3516.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3518.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3519.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3521.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3522.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3523.JPG
http://www.grevaeg.com/images/case08/update2011/IMG_3524.JPG

[Spawn-Inc]

very nice, great pump as well! + rep,

[SXRguyinMA]

looks great :bowdown:

[ShockTheBox]

I love your work.. can your computer and my computer make babies.. :D .. this is just awe inspiring .. I want one for my room.. just so people are like whats that? and I can say its god..

[mittelmeier]

That looks awesome! Are you going to get a video of the water flowing into the res after it's done?

[KiLLERMAN21]

Looking good man, keep up the good work!

[p0Pe]

that looks awsome:D

just wanna say 2 things.
more fluid in thoose res´s
and rezise thoose pics:P

[SXRguyinMA]

I agree with more fluid. now looking at those pics, is the return line hooked to the top of the tubes? if so is it noisy? but then again I'm sure its nothing compared to all those HDDs going lol

[DonT-FeaR]

:O wow

[Drum Thumper]

wow 250 bucks...

whats the second graph??

The second graph shows how high, in a vertical distance, a pump can push liquid until it basically stalls. Depending on application, higher numbers are almost always better. I used to have an all grain homebrewed beer setup that had a 10 gallon per minute pump that would push up to twelve feet vertically iirc. Obviously, that's a lot of flow, so I had it hooked up to a switch that would allow me to fine tune the throughput. I also had plans at one point to make the homebrewing system fully computer controlled and automated, but after a bit of research, along with the fact that brewing beer was becoming more work than fun (fifteen gallon batches will do that to you if you have to bottle it all--that's roughly six and a half cases of 12 oz bottles), I scrapped the idea.

Who knows though, I might revive that idea down the road.

/end thread hijack.

Edit: I didn't realize that a few pages had transpired since I last looked at this. If I just recovered territory that had already been covered, my apologies, those who were responsible for the sacking have just been sacked. :D

[DonT-FeaR]

lol i was wondering why you where re capping it :)


EDIT: 1300 posts :)

[grevaeg]

very nice, great pump as well! + rep,
Thx dude, appreciated =)


looks great :bowdown:


I love your work.. can your computer and my computer make babies.. :D .. this is just awe inspiring .. I want one for my room.. just so people are like whats that? and I can say its god..
haha, best comment ever :P


That looks awesome! Are you going to get a video of the water flowing into the res after it's done?
Yup, for sure, just wanna get the project completed first =)


Looking good man, keep up the good work!


that looks awsome:D

just wanna say 2 things.
more fluid in thoose res´s
and rezise thoose pics:P
thx dude. ill resize as soon as i get a comp with photoshop again, gief cs3 images -.-

And more fluid is coming, just had to order up another 2l =)


I agree with more fluid. now looking at those pics, is the return line hooked to the top of the tubes? if so is it noisy? but then again I'm sure its nothing compared to all those HDDs going lol
At current state its not noisy at all, the water flows on the side of the tubes, it doesnt fall straight down, had to drill a few holes to get that done though, it was making really annoying splashing sounds before that 0.o


:O wow
:P


The second graph shows how high, in a vertical distance, a pump can push liquid until it basically stalls. Depending on application, higher numbers are almost always better. I used to have an all grain homebrewed beer setup that had a 10 gallon per minute pump that would push up to twelve feet vertically iirc. Obviously, that's a lot of flow, so I had it hooked up to a switch that would allow me to fine tune the throughput. I also had plans at one point to make the homebrewing system fully computer controlled and automated, but after a bit of research, along with the fact that brewing beer was becoming more work than fun (fifteen gallon batches will do that to you if you have to bottle it all--that's roughly six and a half cases of 12 oz bottles), I scrapped the idea.

Who knows though, I might revive that idea down the road.

/end thread hijack.

Edit: I didn't realize that a few pages had transpired since I last looked at this. If I just recovered territory that had already been covered, my apologies, those who were responsible for the sacking have just been sacked. :D
*whathesaid*

[DonT-FeaR]

rofl wall of quotes!!! rofl lol

[grevaeg]

haha, thats how it works when u check into a forum every now and then :P

Anyways, added some comments and progress to the previous update =)

[jdbnsn]

I am loving that beast! Infact, I want one now....

[DonT-FeaR]

/\ join the que... lol

[ShockTheBox]

is it going to be done anytime this year..
will it be able to think faster then the AI in games

[AMD Killa]

I'm just thinking of all the SATA/Molex power splitters you are going to need for all those drives, and the SATA data cables. Looks like it will require some serious cable management.

Loving how this beast is turning out by the way. I cant imagine what the hell you would do with 22TB of storage space. Are you planning to add more drives in the future, or sticking with 22TB. You could always have an external unit that stores drives and has a seperate power supply. Hurmmmm..... I wonder, would you turn the power on before or after you plug in the data lines? I'm thinking after.

[DonT-FeaR]

lol i didnt think of that... how do you join that many sata cables?

[The boy 4rm oz]

That's why he has 2 PSU's lol ;).

[AMD Killa]

Even so, he is still gonna need 48 power cables and data cables.

[The boy 4rm oz]

Molex to SATA adapters and RAID controllers, problem solved lol.

The 1200W Thermaltake Toughpower PSU's each have 8 SATA and 8 Molex connectors. That makes 32 connectors in total. The other 16 connectors needed can easily be made up from Molex "Y" splitters and molex to SATA adapters. He could always borrow a few connectors from the 300W Chieftech PSU powering the Atom system. Plus he needs to power the DVD drive.

Attaching the drives to the system may be hard though.
The ASUS P5Q Premium motherboard he is using has connectors for 10 internal SATA drives and a single IDE channel so that is 12 drives in total. The other motherboard, the ASUS P5K Premium, has internal connectors for only 6 SATA drives and a single IDE channel, that makes 10 drives total. So combined both motherboards support 22 drives (18 SATA and 4 IDE). So RAID controllers are definitely needed.

[AMD Killa]

I think he said that he was going to use a SCSI based controller, as SATA is SCSI compatible, he could then just chain them up. All he would need is the adapters I'm guessing.

[The boy 4rm oz]

Yeah pretty much.

[grevaeg]

Lets get some answers, shall we ? ^^

How to power it up:

Pretty much as you guys described, just y split up the molex for now, and ill have plenty of connections for everything... and the 16 amp rails can easily run whatever you throw at them... could have powered up all my disks with one PSU if i would have wanted =) ill have to get some custom wires going in there at some point, but the finances have kinda stopped before xmas :P



The disks and connection for now

The main rigs :

And no... i replaced the P5K premium with another P5Q premium, so the motherboards are the same now =)

That equals 20 s-ata on the mobo's alone
gonna run 2x 4 port pci s-ata controllers as well on disks that wont be used for anything but storage, since pci get bandwith problems really fast

The rest will be run on SAS controllers, still gathering up some cash to get some decent ones, so gonna run on 4x pci-x1 - 4 channel ones for now, thats a additional 24 disks there =) However, these will be replaced by some LSI 8 series ones as soon as i get some more cash to spend ^^ they have a 1500mhz cpu and 2gb onboard memory, that will help the main comp stress less =) and increase the raid performance ALOT


The mITX :

Well... it allready got 2 pata disks connected, and will be using 1 sata slot in dvd/rw , that pretty much fills it up with only 1 sata free, will see if ill put it to use at some point


Mini update :

got some decals cut on the label cutter today ^^.

Will get some pics tomorrow

[The boy 4rm oz]

I missed the motherboard upgrade lol. I couldn't help but do some research into your tech ;) lol.

[Vital]

Are you going to be using i7 processors/motherboards?

[The boy 4rm oz]

No he wont.

Personally I looked into upgrading and it would cost around $1,500AUD for a decent CPU and mobo, perhaps end of financial year (June/July) or end of 2009.

[grevaeg]

Who said decals cant look decent? ^^

More pics to come later today

http://www.grevaeg.com/images/case08/update2911/IMG_3564.JPG

[The boy 4rm oz]

Man that is sweet. Love that decal, goes perfectly with the orange and black.

One question though. When moving it it (if you ever do lol) wouldn't it be better to install some caster wheels to the base?

[mittelmeier]

That decal looks awesome.

[DonT-FeaR]

wheels would be a must??? that thing must weigh a lot

[grevaeg]

A new day, a new update =)

Ah well... finally getting close to completing this one, stuff is coming together quite well, and the computer is booting !

Lets take this step by step though...


New shipment

Not much to say about this one, finally received my OCZ flex kit to fill in the other mobo, and some 120mm fractal design fans rated at 19db
http://www.grevaeg.com/images/case08/update0112/images/IMG_3561.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3568.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3569.jpg



Etches!

Was over at a good friend a few days ago and got him to cut out a decal my ladie had drawn for a earlier project, the application is quite simple too, just tape it up, apply some force, and take off the upper layer of foil, and there we go ^^

http://www.grevaeg.com/images/case08/update0112/images/IMG_3560.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3562.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3563.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3564.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3565.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3566.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3567.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3571.jpg



Booting it up, the first run!

The time had finally come, time to boot it all up !

And to my huge dissapointment... IT REFUSES TO BOOT WITH TWO LSI CONTROLLERS -.- god.... the frustration was overwhelming... waiting for reply from asus on this one...

Anyways... got some first temp readings up too, and it looks more then promissing, the temperature havent budged, even after a 24 hour idle with both systems on, still showing under 25c =) The water keeps a decent 18c too, and all the disks keep under 27c, same with the 15k rpm sas drives

Will get some stress tests soon, just need to get OS installed first
http://www.grevaeg.com/images/case08/update0112/images/IMG_3570.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3572.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3573.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3574.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3575.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3576.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3577.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3578.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3580.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3586.jpg



Cable management

This part has caused some headaches too, trust me :P

Anyways, quite simple going, just some patience and alot of plastic strips, didnt turn out that bad at all imo, was quite alot of sleeving that was needed on the cable splits though
http://www.grevaeg.com/images/case08/update0112/images/IMG_3588.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3589.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3590.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3587.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3591.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3595.jpg



10cm to short

The 8 pin ATX power cable was ofcourse to short =/ had to cut it open and extend it, wired it all up on the backplate of the mobo when i was done though, so turned out OK
http://www.grevaeg.com/images/case08/update0112/images/IMG_3592.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3593.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3594.jpg

[grevaeg]

And have a sack trolley for transport my friends :P

turned up just a bit over 60kg btw ^^

[The boy 4rm oz]

Lol, good old sack trolley haha. Looks very good I must say, nice work on the HDD power and SATA cables, very neat and tidy.

[KiLLERMAN21]

60KG? HOLY S**T! Thats one friggin heavy computer! :eek: well, really its 2 computers, but meh :)

[The boy 4rm oz]

Actually 2 and a half if you count the Intel Atom system ;) lol.

[Vecc]

Omg ****ing 22TB 3 graphic card i am in love LOL

[p0Pe]

60 kilo lol... thats 20 kilo more than mine xDDD and i can barely lift mine!
you handled the cable manegement well IMO :P

[Vital]

You need some bigger monitors than that for this beast.

[DonT-FeaR]

wow ... 60kg isnt to bad considdring what it holds... great work on the cable management man thats awsome..


and popes weak :)

[mittelmeier]

Simply amazing dude. does that bluepoint say 168??

[LiTHiUM0XiD3]

16.8 .... notice the gap? heh im not absolute on this... but.. pretty damn close lolz
would figure if he had something up around 168 in his PC there would be problems

[mittelmeier]

Ok, yea I see the gap now. That makes a lot more sense. I shouldn't use the internet when I'm half asleep.

[grevaeg]

The bluepoint states 16.8 indeed ^^

Just posting up some more pics, should be able to get some final pics soon, just trying to get a deal with matrix orbital done first, that will decide when to conclude this project

http://www.grevaeg.com/images/case08/update0112/images/IMG_3606.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3607.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3608.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3609.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3610.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3611.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3612.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3613.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3614.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3615.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3616.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3617.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3618.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3619.jpg
http://www.grevaeg.com/images/case08/update0112/images/IMG_3620.jpg

[The boy 4rm oz]

Looking really good. Nice neat cabeling considering the amount of hardware you have in there. One question, is that res gonna be completely full?

[grevaeg]

Not sure yet, kinda like the flowing water effect that it has currently, looks awesome ^^

And currently its so much liquid in that ress that it will never fit in the hoses anyways, so the chances of running dry aint there

[DonT-FeaR]

i think its safe to say thats awsomly awsome

[KiLLERMAN21]

^Very muchly awesomely-awesome... amirite?

[mittelmeier]

Wow! Simply amazing. +rep

[scar~face]

:stupid:Japanese spam?

this thing is a BEAST

[grevaeg]

Small update coming up :P

Have been taking a long break off this project , however.. i feel that its now completed, just need to drag it out of the house to take some pics of it

a new set of 4x WD 1500gb disks is on its way, so finally starting to close up to the target 30TB wanted before this years Gathering (http://gathering.org) in norway

A bunch of cathodes have been mounted aswell, and some final touches has been made, ill get a video of the running water up asap, as well as the new pics

Sorry for the lack of updates, i promisse some awesome pics soon

[The boy 4rm oz]

That event looks really awesome. I can't wait for pics.

[DonT-FeaR]

wow... that gathering would be weird... you gunna like run in with your case and put it infront of the orchestra? that be cool ...

[grevaeg]

Well my friend, its the world's second largest LAN party, only beaten by Dreamhack in sweden =)

[DonT-FeaR]

oh... :O

[jdbnsn]

Alright, that does it! Everyone pack their bags, we're going to Sweden...

[The boy 4rm oz]

Damn I could have gone and stayed with my Uncle in Holland if it was earlier in the year. Wouldn't be a long trip from there.

[DonT-FeaR]

jd... i dont want another road trip with you... lol the last on was ineffective... we got nowhere ... you never showed up to get me..

[gamer_from_aust]

I have one question why is so much hardrive space needed?

[grevaeg]

Im heading to one of the largest LAN parties in the world... and ffs guys... u should be here aswell... its from the 8th to 14th of april, lotsa foreigner tickets left!

i dont have remotely enough space to fit the DC hubs locally yet... :P exceeded 400TB of shared stuff last year 0.o

And its nice to have mediacenter's with a local search instead of a online search/download when u wanna access stuff ^^

[The boy 4rm oz]

Sounds like a heap of fun. I may see if I can get a plane ticket for my birthday lol, my birthday is the 7th of April. Won't sit well with the parents though cos that is the middle of the week and I am at Uni lol.

[grevaeg]

Time for a update again ^^

The sideplate

As seen in earlier pics, the sideplate on the case has been somewhat consealing, so decided to do a small modification to it, found my cutter and took out a slob of it :P

[IMG]http://www.badbullz.com/images/stories/temp/027-600.jpg

http://www.badbullz.com/images/stories/temp/028-600.jpg


The second loop!

Aaaand.... the watercooling stuff arrived today ^^

http://www.badbullz.com/images/stories/temp/029-600.jpg

http://www.badbullz.com/images/stories/temp/030-600.jpg

http://www.badbullz.com/images/stories/temp/031-600.jpg

And the first victim would be the most trusted Atom board
http://www.badbullz.com/images/stories/temp/034-600.jpg

Took off the small hinges on the original cooler
http://www.badbullz.com/images/stories/temp/035-600.jpg

And we got a dirty dirty atom beneath -.-
http://www.badbullz.com/images/stories/temp/036-600.jpg

Let the cleansing begin!
http://www.badbullz.com/images/stories/temp/050-600.jpg

And we got a cooler mounted :P
http://www.badbullz.com/images/stories/temp/037-600.jpg

http://www.badbullz.com/images/stories/temp/038-600.jpg

http://www.badbullz.com/images/stories/temp/045-600.jpg

http://www.badbullz.com/images/stories/temp/041-600.jpg

The watertank with supporting rubber thingy with glue on ready..
http://www.badbullz.com/images/stories/temp/039-600.jpg

All stashed up on top of the rack, right next to the newly added 1.5tb drives for the atom
http://www.badbullz.com/images/stories/temp/043-600.jpg
http://www.badbullz.com/images/stories/temp/042-600.jpg

3/4 of the disks in the atom ^^
http://www.badbullz.com/images/stories/temp/048-600.jpg

[grevaeg]

Hosing up the memory!

Ah well... as some of u might know does OCZ produce wierd ass nozzle sizes for their watercooled memory lineup, so had to get a adapter to get my hose size on the second loop down from 3/8 to 1/4

Heres a pic of the modules with some hoses in place
http://www.badbullz.com/images/stories/temp/102-600.jpg

A adapter from 1/2" ti 1/4" had to be used..
http://www.badbullz.com/images/stories/temp/101-600.jpg

Gogo greenish coolant :P
http://www.badbullz.com/images/stories/temp/103-600.jpg


Let the leak test commense!
http://www.badbullz.com/images/stories/temp/104-600.jpg

http://www.badbullz.com/images/stories/temp/105-600.jpg

http://www.badbullz.com/images/stories/temp/106-600.jpg

http://www.badbullz.com/images/stories/temp/107-600.jpg

http://www.badbullz.com/images/stories/temp/108-600.jpg

http://www.badbullz.com/images/stories/temp/111-600.jpg

http://www.badbullz.com/images/stories/temp/112-600.jpg

http://www.badbullz.com/images/stories/temp/113-600.jpg

http://www.badbullz.com/images/stories/temp/114-600.jpg

and YES, i will have to clean up some in that cable mess... just need to get thermaltake to produce me some custom sized power cables -.- wich they refuse with all their might... god its annoying...

Would also help alot with some custom lenght sata cables :P

[grevaeg]

Let there be light!

Guess the time had also come to get that old fashion "im 14 yrs old light" in there aswell

gogo 30cm cathodes!

http://www.badbullz.com/images/stories/temp/119-600.jpg

http://www.badbullz.com/images/stories/temp/122-600.jpg

http://www.badbullz.com/images/stories/temp/137-600.jpg

http://www.badbullz.com/images/stories/temp/138-600.jpg

http://www.badbullz.com/images/stories/temp/135-600.jpg

http://www.badbullz.com/images/stories/temp/139-600.jpg

http://www.badbullz.com/images/stories/temp/144-600.jpg

http://www.badbullz.com/images/stories/temp/145-600.jpg

Ah well... thats it for this time folks... THE final pics will be ready the 8th if april, have to clean up some sideplates and drag the beast out of the room... to get some decent pics... will also have to start doing some custom cables myself if i cant get someone else to do the job ^^

[SXRguyinMA]

this thing looks better everytime I see it :bowdown:

[nevermind1534]

This looks great. I think I would have trouble using all 20TB.

[Luke122]

This looks great. I think I would have trouble using all 20TB.

I also said I would never fill a 220mb hdd! :D

[p0Pe]

all that i recall was looking at my dad when he bought a 20 gig hdd, laugh and say "do you realize how f#cking mental you would have to go in word to fill all that space!"

looks great non the less:)

[nevermind1534]

I couldn't use that much space right now, but everything keeps increasing in size, so I wold eventually.

[Remy]

Saw this quote a few posts back...


Price estimation would be something like this =)

2 nicely specced gaming comps - 3000$ish
22 TB of drives is another 2800$
raid controllers close up to a decent 1800$ too...
4x 24" LCD's - 2000$
plexiglass cost around 100$ a square meter over here - 600$
Watercooling - 600$
Aluminium and other stuff 300$


I thought I was reading the next MasterCard commercial. That quote should have finished with, "Modding the ultimate kickass computer case, Priceless".

Great work you have done so far m8. Love everything about this build, especially the water setup. +rep

[The boy 4rm oz]

all that i recall was looking at my dad when he bought a 20 gig hdd, laugh and say "do you realize how f#cking mental you would have to go in word to fill all that space!"

A mate of mine and I actually overloaded and killed a school computer plus caused the server damage by going mental in word lol. We copied and pasted "A" for something like 2million pages and then tried to save the word doc, the computer couldn't handle the size of the doc and neither could the server lol.

A water cooled Atom, now that is really cool, pardon the pun lol. Very nice work mate, fix up the cables a bit and you'r onto a winner ;).

[grevaeg]

Trying to get thermaltake to produce me some custom cut cables for me, but it doesnt seem too bright atm, so might go get me some custom pcp&c ones

[darthperil]

I just got through reading the whole post and that is one awesome setup you have there. When I spent over $800 building my media server I thought it was kinda pricy. You have taken it to a whole new level, in $$ and capacity. One question, does the lights in the house dim when you fire that baby up???

[DonT-FeaR]

the ram cooler looks soo awesome.. as does the rest of the case...

[The boy 4rm oz]

That's not a RAM cooler, that's the actual RAM, it comes that way lol, the new version is much more user friendly.

[DonT-FeaR]

i knew that :) lol looks cool either way

[grevaeg]

wtf? the new version got awfully really tiny winy nozzles 0.o, EVEN SMALLER then the previous ones -.- how can the "new" modules be more user friendly? :P its double up of the really tiny winy nozzles aswell, wich is a effective double of possible leak possibilites 0.o

And thats without counting in the flow limitations it would give

[The boy 4rm oz]

The new model does use more hoses but they all plug into a single adapter meaning you don't have to shrink the rest of your loop to accomodate. You aren't ment to run it in a loop with a CPU or GPU anyway, it's designed for a secondary loop with NB, SB and mosfets in mind. The new blocks also cool better because you have coolant moving over the RAM chips rather than just the top heat collector.

Here is a good review on the OCZ Flex II:
http://www.bit-tech.net/hardware/memory/2008/07/31/ocz-ddr2-pc2-9200-flex-ii-4gb-series/1

[grevaeg]

project up for sale ^^

grevaeg@hotmail.com, mail me if u would be interested, bids starting at 1900$ for case with watercooling , atom and touchscreen

[p0Pe]

we DO have a sales forum in case you didnt notice:)

[TheGreatSatan]

Let the cleansing begin!
http://www.badbullz.com/images/stories/temp/050-600.jpg


:bowdown:

+Rep

. . . and another little green box for ya!

[grevaeg]

http://4.bp.blogspot.com/_AvN4MA-jIZ4/Sdz3-DW5PjI/AAAAAAAAAFE/1yq6duOkdbQ/s1600/132.JPG

Ah well... this project has left my hands, and went to another client. Hope he's happy ^^

Posting up the last pic taken from this years "The Gathering 2009" in Vikingskipet, Norway

If any mod's decide to take a peak, please mark this project as completed and move the thread =)

[grevaeg]

we DO have a sales forum in case you didnt notice:)

Waaah?! we have!? lol, didnt notice 0.o

And thanks TheGreatSatan ^^