Zac
12-07-2008, 05:27 AM
Hey guys, I thought since I'm gonna make myself a USB to Molex power converter thingy, I'd make a tutorial out of the whole thing.
Anyway, making it is pretty easy, doesn't take too long etc.
You need:
- Wire Cutters
- USB Cable
- Molex Adapter Thingy
- Solder + Soldering Iron
- Tape or Heatshrink
http://i56.photobucket.com/albums/g193/munkey_boy/120708171518.jpg
Step 1
Make your Molex Adapter look like this (picture below), this will allow 5 volts, as that is what the USB port puts out.
http://i56.photobucket.com/albums/g193/munkey_boy/120708171538.jpg
Step 2
Chop the small end off of your USB cable
http://i56.photobucket.com/albums/g193/munkey_boy/120708171609.jpg
Step 3
Cut, chop and modify your chopped USB cable to look like this:
http://i56.photobucket.com/albums/g193/munkey_boy/120708171737.jpg
Protip: These wires are wrapped in lots of protective stuff.
Step 4
Pretty much use your common sense here and hook the red wire up to the red and likewise with black, then solder it and heatshrink or tape it up.
http://i56.photobucket.com/albums/g193/munkey_boy/120708172341.jpg
Final product should look something like this:
http://i56.photobucket.com/albums/g193/munkey_boy/120708172716.jpg
http://i56.photobucket.com/albums/g193/munkey_boy/120708172736.jpg
If you see any errors, have questions and all that other stuff, just post here or pm.
Also, you can the other end of the usb cable and a female Molex Adapter so that you can use your PSU to power things USB things...
Anyway, making it is pretty easy, doesn't take too long etc.
You need:
- Wire Cutters
- USB Cable
- Molex Adapter Thingy
- Solder + Soldering Iron
- Tape or Heatshrink
http://i56.photobucket.com/albums/g193/munkey_boy/120708171518.jpg
Step 1
Make your Molex Adapter look like this (picture below), this will allow 5 volts, as that is what the USB port puts out.
http://i56.photobucket.com/albums/g193/munkey_boy/120708171538.jpg
Step 2
Chop the small end off of your USB cable
http://i56.photobucket.com/albums/g193/munkey_boy/120708171609.jpg
Step 3
Cut, chop and modify your chopped USB cable to look like this:
http://i56.photobucket.com/albums/g193/munkey_boy/120708171737.jpg
Protip: These wires are wrapped in lots of protective stuff.
Step 4
Pretty much use your common sense here and hook the red wire up to the red and likewise with black, then solder it and heatshrink or tape it up.
http://i56.photobucket.com/albums/g193/munkey_boy/120708172341.jpg
Final product should look something like this:
http://i56.photobucket.com/albums/g193/munkey_boy/120708172716.jpg
http://i56.photobucket.com/albums/g193/munkey_boy/120708172736.jpg
If you see any errors, have questions and all that other stuff, just post here or pm.
Also, you can the other end of the usb cable and a female Molex Adapter so that you can use your PSU to power things USB things...