Sting

[Frenkie]

Sting.

A caseconstructie based on a mini-itx mobo.
This time I went for a small case-construction. Especially after I made the BFG
this time I wanted more contrast in my mod collection. Small mini-itx hardware is
much easier to build in larger boxes, boxes or suitcases, but a
entirely new custom case like this I've never seen.(yet)

The hardware.
This time I have a VIA EPIA ML5000EA motherboard, 17 x 17 cm.

http://clan-rag.gameparty.net/bitchie/case/13/STING_55.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_02.jpg

Everything is there and, video, 6 channel audio, 100 mbit lan and a passive cooled
533 MHz CPU.

http://clan-rag.gameparty.net/bitchie/case/13/STING_01.jpg

Also, I have a slot-in DVD player, it comes with an adaptor for the mobo.

http://clan-rag.gameparty.net/bitchie/case/13/STING_03.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_04.jpg

Then the HDD. First, I had a 40 GB 2.5 " laptop hard drive with an adaptor ....

http://clan-rag.gameparty.net/bitchie/case/13/STING_06.jpg

... but I've found something much more fun.

http://clan-rag.gameparty.net/bitchie/case/13/STING_07.jpg

A SSD of a simple CF card.

http://clan-rag.gameparty.net/bitchie/case/13/STING_08.jpg

A 2Gb CF card, and the adapter comes (where else) from Hong Kong.
Together with its passively cooled CPU and SSD he is 100% silent.
By comparison, a picture with a standard 3.5 "HDD, a 2.5" HDD and the
new SSD.

http://clan-rag.gameparty.net/bitchie/case/13/STING_09.jpg

Oh yes, and for comparison, this was a few years ago the 10 Megabyte Winchester
disk ....

http://clan-rag.gameparty.net/bitchie/case/13/STING_10.jpg

http://www.techepics.com/files/look_back_full.jpg


SketchUp.

My design is based on the general shape of a Scorpion.
Judging from the minimum sizes of the hardware (mobo, powersupply and slot-in
DVD player) I started playing with SketchUp.
I even have a photo taken of the motherboard and all hardware components and
in SketchUp used as texture. Can I recommend to everyone, looks much more
realistic.

http://clan-rag.gameparty.net/bitchie/case/13/STING_05.jpg

A body ...

http://clan-rag.gameparty.net/bitchie/case/13/STING_11.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_12.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_13.jpg

a tail ...

http://clan-rag.gameparty.net/bitchie/case/13/STING_14.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_15.jpg

and two arms with slicers/dicers.

http://clan-rag.gameparty.net/bitchie/case/13/STING_16.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_17.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_18.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_19.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_20.jpg

I have long sought materials for the case, and I've found something unique.
You know a lot of PCs are built from old motherboards, well, I found
industrial circuitboards that have not yet been finished.

http://clan-rag.gameparty.net/bitchie/case/13/STING_57.jpg

Beautiful dark green circuit boards, completely flat and clean.

http://clan-rag.gameparty.net/bitchie/case/13/STING_40.jpg

An additional bonus was found only afterwards, when you shine a light slightly behind / under it, it shows the print-threads through it.

http://clan-rag.gameparty.net/bitchie/case/13/STING_27.jpg

A very nice effect, I think.

http://clan-rag.gameparty.net/bitchie/case/13/STING_26.jpg

As I used it with my R2-D2, I tried using the UV responsive gel pens again.

http://clan-rag.gameparty.net/bitchie/case/13/STING_39.jpg

Now my green pens bought them for this mod to be deployed, but my first
experimental did not gave me the effect what I thought of it.

http://clan-rag.gameparty.net/bitchie/case/13/STING_41.jpg

The Case.

As a basis, I have taken an aluminum plate of 1.5 mm thick.

http://clan-rag.gameparty.net/bitchie/case/13/STING_42.jpg

The measurements taken from SketchUp and drawn.
Converted to the minimum height of the backplate.

http://clan-rag.gameparty.net/bitchie/case/13/STING_43.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_44.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_45.jpg

Ontopic, see my latest toy, a Ferm figuresaw I got from the flea market (cost 12 euros).

http://clan-rag.gameparty.net/bitchie/case/13/STING_52.jpg

And a new sander of Rexxon.

http://clan-rag.gameparty.net/bitchie/case/13/STING_53.jpg

Finishing is ofcourse still needed with needle files for finishing touch.

http://clan-rag.gameparty.net/bitchie/case/13/STING_54.jpg

The hole cut for the backplate.

http://clan-rag.gameparty.net/bitchie/case/13/STING_56.jpg

And then the sawn boards to the desired sizes.
Even a quick mock-up with adhesive tape.

http://clan-rag.gameparty.net/bitchie/case/13/STING_22.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_23.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_28.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_29.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_30.jpg

And now I show you how it looks with light behind it.

http://clan-rag.gameparty.net/bitchie/case/13/STING_25.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_32.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_33.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_34.jpg

For the assembly of printed circuit to the aluminum chassis I used
brackets of the same aluminum and popnagels.(rivets?)

http://clan-rag.gameparty.net/bitchie/case/13/STING_46.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_47.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_48.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_51.jpg

For the tail, I got some perforated aluminum strip.

http://clan-rag.gameparty.net/bitchie/case/13/STING_49.jpg

Like it so far?

Frenkie

[Frenkie]

The standard wires from the pico power supply are way too long.

http://clan-rag.gameparty.net/bitchie/case/13/STING_58.jpg

Because the powersupply is right beneath the mobo, a forest of wires is stucking out above it, and we dont want that now, do we?

http://clan-rag.gameparty.net/bitchie/case/13/STING_59.jpg

With some creative cutting and new connectors that piece is now tailored.

http://clan-rag.gameparty.net/bitchie/case/13/STING_60.jpg

The IDE cable that comes with the mobo is also standard way too long.

http://clan-rag.gameparty.net/bitchie/case/13/STING_61.jpg

This looks much better already.

http://clan-rag.gameparty.net/bitchie/case/13/STING_62.jpg

So it looks a little better already.

http://clan-rag.gameparty.net/bitchie/case/13/STING_63.jpg

Some connectors for the powerLED, HD-LED, reset and power switch, got them from old PCs, very handy to have laying around.

http://clan-rag.gameparty.net/bitchie/case/13/STING_64.jpg

The tail-backbone, I gave it some small nudges, in a logaritmic form.

http://clan-rag.gameparty.net/bitchie/case/13/STING_65.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_66.jpg

With some tape, I tried to imagine if my idea is going the right way.
It sort-off has to resemble scales of a snake/fish. like. ish. :D

http://clan-rag.gameparty.net/bitchie/case/13/STING_67.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_68.jpg

Please note: this is only one side, the tail had three sides.

http://clan-rag.gameparty.net/bitchie/case/13/STING_69.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_70.jpg

The plates for one side of the tail

http://clan-rag.gameparty.net/bitchie/case/13/STING_75.jpg

And for both sides.

http://clan-rag.gameparty.net/bitchie/case/13/STING_76.jpg

[Frenkie]

Got a batch of defect computer hardware from Computer Service Maastricht, I guess recycling is a good thing, right?

http://clan-rag.gameparty.net/bitchie/case/13/STING_78.jpg

Disassembled the harddrives.

http://clan-rag.gameparty.net/bitchie/case/13/STING_79.jpg

To give the case a bit more depth, I cut a large hole in the top panel.

http://clan-rag.gameparty.net/bitchie/case/13/STING_80.jpg

And an overlapping panel that is just a bit bigger.

http://clan-rag.gameparty.net/bitchie/case/13/STING_81.jpg

Some harddisk parts form little feet for that panel.

http://clan-rag.gameparty.net/bitchie/case/13/STING_82.jpg

And glued the large panel together on the toppanel.

http://clan-rag.gameparty.net/bitchie/case/13/STING_83.jpg

And now I have a bith more depth and detail.

http://clan-rag.gameparty.net/bitchie/case/13/STING_84.jpg

With a light behind it, it is still good looking IMO.

http://clan-rag.gameparty.net/bitchie/case/13/STING_85.jpg

In the meanwhile, I'm slowly getting the tail parts together, but forming the tail with the loose tiles is a very difficult and slow process, frustrating and tedious. :(

http://clan-rag.gameparty.net/bitchie/case/13/STING_77.jpg

[Frenkie]

Here are some pictures of the tiles on the tail, secured with construction kits.

http://clan-rag.gameparty.net/bitchie/case/13/STING_71.jpg

A piece of foam, for me to help with securing the tail-sides.

http://clan-rag.gameparty.net/bitchie/case/13/STING_73.jpg

And that foam triangle runs off course into the tip.

http://clan-rag.gameparty.net/bitchie/case/13/STING_74.jpg

Here you see two pieces UV green plexi which I believe will create a slight glow underneath the case.

http://clan-rag.gameparty.net/bitchie/case/13/STING_72.jpg

[Frenkie]

Thanx guys, much appriciated.

I have bought two green lasers from Hong Kong.

http://clan-rag.gameparty.net/bitchie/case/13/STING_86.jpg

They are very much larger than the red lasers that I've used in the BFG
:(
Buttttttt ..... just for comparison, look here is the light of a red laser on a lamp-reflector....

http://clan-rag.gameparty.net/bitchie/case/13/STING_87.jpg

..... and here the new green laser.

http://clan-rag.gameparty.net/bitchie/case/13/STING_88.jpg

So without any more delay, I gutted the pen's.

http://clan-rag.gameparty.net/bitchie/case/13/STING_89.jpg

And after the soldering of the wires, (and adaptation to 5 V) I finished it with shrinking tube (?)

http://clan-rag.gameparty.net/bitchie/case/13/STING_90.jpg

Now it's much more suited to build it in this little mini case.

[Frenkie]

At first I wanted to let both lasers shine through the slot-in player

http://clan-rag.gameparty.net/bitchie/case/13/STING_91.jpg

But I changed my mind and now I want a laser mounted in the tail.

http://clan-rag.gameparty.net/bitchie/case/13/STING_92.jpg

From a cellphone motor and some pieces of aluminum I made a mini drill.

http://clan-rag.gameparty.net/bitchie/case/13/STING_93.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_94.jpg

It runs on one AA penlite battery and is really very small.

http://clan-rag.gameparty.net/bitchie/case/13/STING_95.jpg

This drill will be in one of the two arms.
For those arms, I have found this aluminum profile tube ....

http://clan-rag.gameparty.net/bitchie/case/13/STING_96.jpg

.... they fit neatly together.

http://clan-rag.gameparty.net/bitchie/case/13/STING_97.jpg

Maybe something like this? Who knows. See you at the next update.

http://clan-rag.gameparty.net/bitchie/case/13/STING_98.jpg

[Frenkie]

Im FIRING MAH LAZORS lol nice

ROFL !!!

The drill will come in one of the "hand's" of the scorpion, on the other "hand" I am making some kind of circular Saw.

Let me show you what my idea behind the case + the lasers is.

The laser in the tail shines an X distance in front of the case.
íf I mount the second laser underneath the toppanel, I want it to shine in exactly the same spot as the tail laser.

http://clan-rag.gameparty.net/bitchie/case/13/STING-LASERS.JPG

Seen from above, you can see that I've designed the case with a "focal point" for the physical dimensions of the case.

http://clan-rag.gameparty.net/bitchie/case/13/STING-LASERS2.JPG

My idea is to get those two points/spots (laserspot and the physical focal point) really at onto each other. I am working to get my case that way.

[Frenkie]

An overview of the whole PC and the PSU in it. Here all the wires are wayyyyy to long, so I cut them to size and meshed them with green UV mesh.

http://clan-rag.gameparty.net/bitchie/case/13/STING_100.jpg

Been busy with the square tubing for both arms.

http://clan-rag.gameparty.net/bitchie/case/13/STING_101.jpg

Just playing with the various parts to get a better feel about the dimensions.

http://clan-rag.gameparty.net/bitchie/case/13/STING_102.jpg

Some idea for the left arm.

http://clan-rag.gameparty.net/bitchie/case/13/STING_103.jpg

and some fantasy about the right arm.

http://clan-rag.gameparty.net/bitchie/case/13/STING_104.jpg

(If you payed attention, you would have noticed the shoulder pieces of my Wall-E mod (http://forum.bouweenpc.nl/topic/4662) )

[Frenkie]

I toke some parts of the arms under the lathe and made some 1.5 mm cuttings in them.

http://clan-rag.gameparty.net/bitchie/case/13/STING_107.jpg

From the circuitboard I made the counterparts for those three cuttings.

http://clan-rag.gameparty.net/bitchie/case/13/STING_108.jpg

Here is one of those parts with the circuitboard.

http://clan-rag.gameparty.net/bitchie/case/13/STING_109.jpg

Fits like a glove.

http://clan-rag.gameparty.net/bitchie/case/13/STING_110.jpg

And the other ones too, looks pretty cool I think.

http://clan-rag.gameparty.net/bitchie/case/13/STING_111.jpg

For the slice-and-dice arm, I cut a slot in it of just 2 mm wide.

http://clan-rag.gameparty.net/bitchie/case/13/STING_112.jpg

Made thread in the tube that fits right in with M2 thread.

http://clan-rag.gameparty.net/bitchie/case/13/STING_113.jpg

And ofcourse a M2 screw.

http://clan-rag.gameparty.net/bitchie/case/13/STING_114.jpg

Retracted....

http://clan-rag.gameparty.net/bitchie/case/13/STING_115.jpg

...and now extended.

http://clan-rag.gameparty.net/bitchie/case/13/STING_116.jpg

View from the other side, maybe later i'll try a small motor drive.

http://clan-rag.gameparty.net/bitchie/case/13/STING_117.jpg

Like it so far ?

[Frenkie]

I fastened the slot-in DVD player with velcro. Dont see that everyday right?

http://clan-rag.gameparty.net/bitchie/case/13/STING_119.jpg

Layed the IDE cable as tight as possible on the mobo. Also made new cables for the CCF and the DVD, this time designed them to fit snug, and ofc meshed it all.

http://clan-rag.gameparty.net/bitchie/case/13/STING_120.jpg

This time I wanted a sort-of shield over the mobo, made from mesh. First a test with plain paper.
http://clan-rag.gameparty.net/bitchie/case/13/STING_121.jpg

Then in AC-Ryan mesh.
http://clan-rag.gameparty.net/bitchie/case/13/STING_122.jpg

Spraypainted with green UV.
http://clan-rag.gameparty.net/bitchie/case/13/STING_123.jpg

And fitted.
http://clan-rag.gameparty.net/bitchie/case/13/STING_124.jpg

And another piece over the DVD player.
http://clan-rag.gameparty.net/bitchie/case/13/STING_125.jpg

With an UV lamp, it lights up very nice.
http://clan-rag.gameparty.net/bitchie/case/13/STING_126.jpg

--------

Apologies for the long delay in updating guys. I was very busy with the second round of the modding competition of BouwEenPc. It payed of, since I won first place with my Command & Conquer PSU mod.

[Frenkie]

Apologies for such late reply, I am currently very busy with a casemod for a competition here in Holland.
Still, I have found a little time in between, to do s very small update. I fastened the arms to the chassis with rivets.
http://clan-rag.gameparty.net/bitchie/case/13/STING_132.jpg

Here they will be fastened.
http://clan-rag.gameparty.net/bitchie/case/13/STING_131.jpg

Now a on-off switch and a reset switch.
http://clan-rag.gameparty.net/bitchie/case/13/STING_133.jpg

With polystyreen I made a small subframe to prevent the knob of sticking out too much.
http://clan-rag.gameparty.net/bitchie/case/13/STING_134.jpg

And this one for the on-off switch, this one is allowed to stick a bit more out.http://clan-rag.gameparty.net/bitchie/case/13/STING_135.jpg

Fastened with construction-glue.
http://clan-rag.gameparty.net/bitchie/case/13/STING_136.jpg

View from the rear.
http://clan-rag.gameparty.net/bitchie/case/13/STING_137.jpg

Here you see the reset which is below the surface.
http://clan-rag.gameparty.net/bitchie/case/13/STING_138.jpg

again apologies for my late reply, If you want, I can post the worklog of the new casemod ( Command & Conquer GDI Construction Yard building ) also here on TBCS.

[Frenkie]

Cut up a lot of wires and meshed them.
http://clan-rag.gameparty.net/bitchie/case/13/STING_139.jpg

Mounted switches for all motors, leds and laser.
http://clan-rag.gameparty.net/bitchie/case/13/STING_140.jpg

In close-up.
http://clan-rag.gameparty.net/bitchie/case/13/STING_141.jpg

Unfortunatly I made a mistake.....
http://clan-rag.gameparty.net/bitchie/case/13/STING_142.jpg

This triangle piece was planned to cover the switches, but the outer most switch is now in its way and has to be moved.
http://clan-rag.gameparty.net/bitchie/case/13/STING_143.jpg

Ok, so I drilled another hole and now its all ok again.
http://clan-rag.gameparty.net/bitchie/case/13/STING_144.jpg

[Frenkie]

nice work so far man hows round 3 going?

Well, round 3 is still underway, I hope Dec 16 will be the finale. But back to this project;

Connected everything what I could find, looks really messy!
http://clan-rag.gameparty.net/bitchie/case/13/STING_145.jpg

Right side.
http://clan-rag.gameparty.net/bitchie/case/13/STING_146.jpg

Left side in the light.
http://clan-rag.gameparty.net/bitchie/case/13/STING_147.jpg

Left side in the dark. Here you can see that EL tape glowing quite nice.
http://clan-rag.gameparty.net/bitchie/case/13/STING_148.jpg

Overview in the dark, the EL tape is still loose, but you can allready see the glow

emiting I mentioned before.
http://clan-rag.gameparty.net/bitchie/case/13/STING_149.jpg

A little more close-up of the right arm, the "hand" has no blades attached.
http://clan-rag.gameparty.net/bitchie/case/13/STING_150.jpg

[Frenkie]

I like the green EL tape. It goes good with your color scheme. I used some el wire before but I got a really high pitch whine that came from the transformer, so I was curious if the tape did the same thing.

Well, at first..... I DID hear a real high whine when I started the comp... and I thought the same thing as you described. Then I realised I had one of the motors in the arms on. That motor made the whine in my mod. LOL I DID however hear of your problem, with EL tape/high voltage transformers. A friend of mine suggested a rubberband wrapped around the transformer, but I dont know if that is any help to you.

[Frenkie]

Started with the outside covers. This is one of the two rear-triangles.
After the construction-glue sets, ill tidy up the edges.
http://clan-rag.gameparty.net/bitchie/case/13/STING_151.jpg

This is the replacement fan-hand, made from an old VGA-fan.
http://clan-rag.gameparty.net/bitchie/case/13/STING_152.jpg

The left side.
http://clan-rag.gameparty.net/bitchie/case/13/STING_153.jpg

Making the final adjustments.
http://clan-rag.gameparty.net/bitchie/case/13/STING_154.jpg

Glued the covers to the aluminium strips on the side.
http://clan-rag.gameparty.net/bitchie/case/13/STING_155.jpg

View from the rear-left side.
http://clan-rag.gameparty.net/bitchie/case/13/STING_156.jpg

Close-up of one of the gills.
http://clan-rag.gameparty.net/bitchie/case/13/STING_157.jpg

To fit the large strip on the front-left side, I need to cut out a piece for the arm.
http://clan-rag.gameparty.net/bitchie/case/13/STING_158.jpg

Nice and tight fit.
http://clan-rag.gameparty.net/bitchie/case/13/STING_159.jpg

When the right side is fastened, the case is starting to show its shape a lot better.

[Frenkie]

Like I said, I made a mistake with the strips that come on top of the mod. I made them too short!
http://clan-rag.gameparty.net/bitchie/case/13/STING_161.jpg

I thought of something that would not only deal with that mistake, but also give it a bit extra.
First I made some small pieces of circuitboard, that will act as supports.
http://clan-rag.gameparty.net/bitchie/case/13/STING_162.jpg

Then I made these small strips from UV green plexi.
http://clan-rag.gameparty.net/bitchie/case/13/STING_163.jpg

These will come here on top of the supports.
http://clan-rag.gameparty.net/bitchie/case/13/STING_164.jpg

With a little glue and a clamp, set to dry.
http://clan-rag.gameparty.net/bitchie/case/13/STING_165.jpg

When the lights hit the strips, they light up like a xmass tree.
http://clan-rag.gameparty.net/bitchie/case/13/STING_166.jpg

And here two overview shots, now you see the size of the mod entirely.
http://clan-rag.gameparty.net/bitchie/case/13/STING_168.jpg

http://clan-rag.gameparty.net/bitchie/case/13/STING_169.jpg

[Frenkie]

thanx mate, much appriciated.

Time to give the little beast some legs. These I make from old 2.5" harddrives. These are the discs that sit on top.
http://clan-rag.gameparty.net/bitchie/case/13/STING_170.jpg


Cut in half.
http://clan-rag.gameparty.net/bitchie/case/13/STING_171.jpg


Then glued to the mod with constructiekit. ( a little bit too much here )
http://clan-rag.gameparty.net/bitchie/case/13/STING_172.jpg


Three times on the left and three times on the right.
http://clan-rag.gameparty.net/bitchie/case/13/STING_173.jpg


The legs are made from the actual read-write heads from those laptop-drives.
http://clan-rag.gameparty.net/bitchie/case/13/STING_174.jpg


Once the kit is hardened, it should be looking a bit like this.
http://clan-rag.gameparty.net/bitchie/case/13/STING_175.jpg

[Frenkie]

Well, there not motherboards, these are industrial PCB's. But old motherboards should be also very good.

Ok, After reviewed the critics, I decided to make three extra limbs for the rear legs.
http://clan-rag.gameparty.net/bitchie/case/13/STING_176.jpg

Now there much more in proportion.
http://clan-rag.gameparty.net/bitchie/case/13/STING_177.jpg

Last to do is to connect them to the chassis and then final testing.
http://clan-rag.gameparty.net/bitchie/case/13/STING_178.jpg

[Frenkie]

Thanx guys, youre the best !

Ok ok last modification for the rear-legs; by combining two ideas of readers ( thank you for that! ) I made two sections, one thicker sandwich from circuitboard, plexie and circuitboard. And one thinner and smaller one with one circuitboard less.
http://clan-rag.gameparty.net/bitchie/case/13/STING_179.jpg

To bring back the aluminium-look, I used a 3mm strip to hold it all together.
http://clan-rag.gameparty.net/bitchie/case/13/STING_180.jpg

Looks nice with a little light behind it.
http://clan-rag.gameparty.net/bitchie/case/13/STING_181.jpg

I glued the read-write heads to the legs and then sanded the whole smooth.
http://clan-rag.gameparty.net/bitchie/case/13/STING_183.jpg

I just had to modify the large arms with more circuitboard, to get it more "in-sync", agreed?
http://clan-rag.gameparty.net/bitchie/case/13/STING_182.jpg

With the EL-tapes on, in the light you dont see much of them...
http://clan-rag.gameparty.net/bitchie/case/13/STING_184.jpg

...but in half-light it looks just as I expected it would.
http://clan-rag.gameparty.net/bitchie/case/13/STING_185.jpg

Still have a hard time making pix in the dark, but this should give you an idea.
http://clan-rag.gameparty.net/bitchie/case/13/STING_186.jpg

And the other side.
http://clan-rag.gameparty.net/bitchie/case/13/STING_187.jpg

And front/top.
http://clan-rag.gameparty.net/bitchie/case/13/STING_188.jpg

An overview with the flashlight.
http://clan-rag.gameparty.net/bitchie/case/13/STING_189.jpg

This is the end of the work-log. I hope you enjoyed reading it as much as I enjoyed making the case.
http://clan-rag.gameparty.net/bitchie/case/13/STING_190.jpg

Frenkie

[Frenkie]

Really really last post, just threw some LEDs together.
http://clan-rag.gameparty.net/bitchie/case/13/STING_193.jpg

Quick and dirty isolation with tape.
http://clan-rag.gameparty.net/bitchie/case/13/STING_191.jpg

Pre-bended them to follow the curve of the tail.
http://clan-rag.gameparty.net/bitchie/case/13/STING_192.jpg

Inserted the LED-strip and hooked it up to the HD activity. Connected the laser to a 12 V line.

Ending the story with a small movie, I still can't capture the green laser very good. I sprinkled some saw-dust to show it bettter.
6uVAiCJTLc0


Green laser on STING (http://www.youtube.com/watch?v=6uVAiCJTLc0)




Link To Original Worklog (http://www.thebestcasescenario.com/forum/showthread.php?t=15742)