Waynio
02-23-2009, 11:57 AM
some like it some don't :D
but it has never seen red light of doom and should last until i don't want it :up:
to be honest i never really thought of posting this here, but seen as some others are posting their console mods i thought why not :D enjoy 1 of the craziest cooling mods done on a 360
http://img30.picoodle.com/img/img30/4/5/9/f_1m_80c9716.jpg
http://img32.picoodle.com/img/img32/4/5/9/f_2m_01b9912.jpg
http://img31.picoodle.com/img/img31/4/5/9/f_3m_735b33c.jpg
http://img34.picoodle.com/img/img34/4/5/9/f_4m_5d46950.jpg
http://img30.picoodle.com/img/img30/4/5/9/f_5m_fc8cb8d.jpg
my supercooling mod for my 360, bought back when it was released so is the 1st revision 360 and been running it in this state for nearly 2 years, for mounting the heatsinks i used 2 aluminium floppy bay case covers drilled both ends & trimmed both corner ends and used my bolts, springs and nuts from my d-tek water block to mount them and used video card copper memory blocks for the memory, i extended the dvd power cable and used a normal sata cable so it can be placed next to the console, both gpu and cpu only go above ambient temps a little, always stays nice and chilled even in summer.
Link To Original Worklog (http://www.thebestcasescenario.com/forum/showthread.php?t=17886)
but it has never seen red light of doom and should last until i don't want it :up:
to be honest i never really thought of posting this here, but seen as some others are posting their console mods i thought why not :D enjoy 1 of the craziest cooling mods done on a 360
http://img30.picoodle.com/img/img30/4/5/9/f_1m_80c9716.jpg
http://img32.picoodle.com/img/img32/4/5/9/f_2m_01b9912.jpg
http://img31.picoodle.com/img/img31/4/5/9/f_3m_735b33c.jpg
http://img34.picoodle.com/img/img34/4/5/9/f_4m_5d46950.jpg
http://img30.picoodle.com/img/img30/4/5/9/f_5m_fc8cb8d.jpg
my supercooling mod for my 360, bought back when it was released so is the 1st revision 360 and been running it in this state for nearly 2 years, for mounting the heatsinks i used 2 aluminium floppy bay case covers drilled both ends & trimmed both corner ends and used my bolts, springs and nuts from my d-tek water block to mount them and used video card copper memory blocks for the memory, i extended the dvd power cable and used a normal sata cable so it can be placed next to the console, both gpu and cpu only go above ambient temps a little, always stays nice and chilled even in summer.
Link To Original Worklog (http://www.thebestcasescenario.com/forum/showthread.php?t=17886)