Counter Strike Case Help

[sgtmccrea]

Hello all, my first post woohoo!!!

Im begining my quest to do my first ever case mod. Im addicted to gaming and i want to create a counter strike themed case.

This is the case i have (a spare one i got hold of)
http://65.119.30.151/productimage/11-125-119-01.JPG

Ive got the idea sorted for the side of the case, and that is to cut the shape of the CS man logo out of the side, then putting mesh behind it with a nice strip light inside to shine the shape out.

Im now trying to come up with an idea for the front of the case. Also im wondering what paint scheme to go with.

If possible would you be able to do a concpt idea, or even just some general idea. I DEFINATELY WANT IT FOCUSED AROUND GUNS.

Anyone got any ideas??

[richmandudeus]

I'll dwell on it... i used to be a CS fan myself. Great case to work with...

":D WELCOME TO THE FORUMS AND TBCS!!!:D "

Where your whole life gets drained in exhausting manifestations of abundant mod ideas and lack of productivity at school/work...

[Nawl]

Maybe something shiny black with hmmm..

maybe red/blue/green light. Also you could use Counter-Strike thumbscrews and have a CS-logo as reset button.

[lastweek]

I have a great idea, I am a huge CS player and maybe what you should do is like big etching of all the player models from CS 1.6. And then on the other side do a first person scen etching.

[onelegout]

I have a great idea, I am a huge CS player and maybe what you should do is like big etching of all the player models from CS 1.6. And then on the other side do a first person scen etching.
hell yeah it needs an etching! If I were you though I would do an etching of like, a first person view, like with all the HUD showing and the good ole m4a1 being aimed at the processor :D

[shocker((o))]

kk... how about a border down the middle of the case, one side blue and one side red (CT and terrorist) on front, have an etching w/ ak and colt someway that takes up the leangth.

then take lastweek's idea and on blue side make all CT models in etching, then on red side an etching of all ts. i no it contradicts ur own design but i think it would look bad a$$. (make sure that the colors rnt too bright!:) :p )

[shocker((o))]

:-/ if anybody wants to comment on my idea it would be cool.... :-)

[unknownconcepts]

ill be glad to help some...
first off cutting the lil CS guy out might be tuff.
y dont you make a window like no one else have and etch him in
give the case a worn look and maybe some bulletholes in the plexi and blood marks or somthing
also use the back of some 9mm or 30/30 bullet shells for the power and reset buttons

[shocker((o))]

ill be glad to help some...
first off cutting the lil CS guy out might be tuff.
y dont you make a window like no one else have and etch him in
give the case a worn look and maybe some bulletholes in the plexi and blood marks or somthing
also use the back of some 9mm or 30/30 bullet shells for the power and reset buttons

Good idea!

[unknownconcepts]

when you do the bullet holes....just dont go and shoot the plexi.. it will shatter.
ive already tryed.

[DangerRanger]

for bullet holes get the stickers that folks put on their cars and trucks.Look real and you dont have dust holes in plexi or case..;)

[unknownconcepts]

if you put some clear tape behind the hole in the plexi you wont be able to tell theres tape and it wont suck in