On/off switch for 4-pin molex?

[Yenly]

Hey, I've had an x-dreamer 2 for over a year now... but the problem is, I leave the lights turned off (unplugged) due to the fact that the case is in my bedroom and I can't sleep with it on.

My question is: Is there a switch for 4-pin molex connectors? Is there any way to make a switch? :?

[FynexFox]

Yes there is my friend. heres what you could do. Id suggest a rocker switch. Theyre very sleek, and msot have a lil led that shows you its on, wich can bed any color to match your case lighting.

http://www.thinkgeek.com/images/products/zoom/rocker-switch.jpg

Theres an example. What you would do is connect the ground directly to your light, but run the voltage through the switch. Diagram below.

http://img.photobucket.com/albums/v292/FynexFox/lightdiagram.jpg

you may get a better diagram but thats what I made up for ya lol. For the rocker switch theres 2 pins on the abck, just conenct the 12 or 5 volt lead from the PSU to the top pin, and then run a wire to the light molex out the bottom pin. Someone else may be able to help you more.

[Oblivion72]

Be careful though alot of times if you have a light on the switch then you also need to have a ground wire going to the switch. Make sure that you read the instructions with the switch!