Project: Gardens of Versailles

[Datech]

Ok, so a month behind schedule and on the heels of the still technically unfinished Passion, here is The Gardens of Versailles!

The following is the main part of my Future Projects post from a while ago but updated to what I currently have. At the bottom is the newest piece for this case, an image of the CAD file I'm sending off to some waterjet guys for cutting. Enjoy, and I am really trying to get this one done by August. I've got the majority of the component already, and I'm trying to stick to a timetable. As soon as I get Nighttrain's 12mp point and shoot I'll get a bunch of pictures up here.

Here is the outline for my next mod, The Gardens of Versailles. It is now in the last part of the design phase and will hopefully be completed no later than August.

This mod is going to be a surprise for my mother. She knows I plan on building her a computer, and I expressed interest in modding one for her, but we never discussed anything besides possibly making the theme landscaping/flowers. In the summer after 8th grade I had the opportunity to visit France for two weeks with a tour group, and we made a day long stop at the Palace of Versailles. If anyone knows anything about Versailles and the eccentric Louis's that lived there, you know that it sits on a huge parcel of land, most of which is gardens. One place that particularly struck me was the Orangerie, just outside the main palace.

The Orangerie:
http://www.france-travel-photos.com/admin/photos/307.jpg

http://www.stylish.ca/orangerie.jpg

http://img7.imageshack.us/img7/2610/orangerieyp0.jpg

So with that in mind, I then chose my components. These may change, but it doesn't really matter:
Purchased, On Order, Will Order
Motherboard: ECS Black Series AMD 780G mobo (http://www.newegg.com/Product/Product.aspx?Item=N82E16813135075)
RAM: OCZ 4GB (2 x 2GB) DDR2-800 (http://www.newegg.com/Product/Product.aspx?Item=N82E16820227269)
CPU: AMD Athlon 64 X2 5200 Brisbane 2.7GHz (http://www.newegg.com/Product/Product.aspx?Item=N82E16819103210)
Power Supply: Thermaltake Purepower 500W Power Supply (http://www.newegg.com/Product/Product.aspx?Item=N82E16817153052)
Graphics Card: POWERCOLOR Radeon HD 3650 512MB (http://www.newegg.com/Product/Product.aspx?Item=N82E16814131084)
Hard Drive: Seagate Barracuda 320GB 7200 RPM (http://www.newegg.com/Product/Product.aspx?Item=N82E16822148316)
DVD-ROM: Pioneer Black 20X DVD+R (http://www.newegg.com/Product/Product.aspx?Item=N82E16827129038)
CPU Cooler:ARCTIC COOLING ACF64LP 60mm CPU Cooler (http://www.newegg.com/Product/Product.aspx?Item=N82E16835186019)
Monitor: ASUS 19" Widescreen LCD Monitor (http://www.newegg.com/Product/Product.aspx?Item=N82E16824236056)

So here is the sketchup model:

http://img23.imageshack.us/img23/4784/casexd7.jpg

The front of the case I have looks nothing like this, and I have a bunch of other ideas for the sides. I haven't had a chance to update the SketchUp drawings yet, so bear with it and pay attention to the overall design.
http://img22.imageshack.us/img22/7072/case1ft5.jpg

http://img21.imageshack.us/img21/3914/case2me0.jpg

http://img19.imageshack.us/img19/2795/case4yy9.jpg


I'm going to try and keep the colors dull and simple. I don't want it to be a huge flashy case due to color, I'd rather it be something you can set on top of a nightstand next to a desk and actually look like a representation of the Orangerie. I didn't bother putting the components in the SketchUp case, but the holes will be backed by 1/8" blue frosted plexiglass most likely, and the 120mm fan in the center will glow blue to simulate water throughout the cutout. I am going to have the cutout custom cut at a local metal shop to ensure the complexity stays. I'll probably get the trees at a local train hobby store as well.

As far as paint and color scheme a lot has changed since those initial SketchUps. I still plan on doing some kind of green and beige on the top part with the trees to simulate grass and pathways. As far as the sides though, I still need to do a little research and brainstorming on what I want to do. My case is such that when laid down the power button has an arch around it, so I plan on incorporating the Arc de Triumph around it somehow. For the non-face sides I plan on siding it with some sort of decorative french styled wallpaper or lining. A faux-leather in tan/burgundy with a gold leaf/vine pattern is what I keep picturing as I want this to be a darker colored case. No French pastels or anything like that.

Once again, not sure what direction I'm going to go with the sides, but they hopefully won't just be green. If anyone has any ideas feel free to post them.

And now the final piece. The completed AutoCAD wireframe of the case top. I don't have it textured or anything as I don't know what the water jet guy is going to want. The red rectangle on the pic is the little handhold area that helps you take the case side off. I'm not sure if I'm going to flatten that out of just leave it to be cut into yet.
http://img8.imageshack.us/img8/5740/gardensm.jpg

Thats about all I can think about right now, what does everyone think?

[Datech]

just a question for the landscaping are you going to use train modeling grass, fake water cuz that would be awesome

The water is going to be represented by a blue plexi backing for the window. I still haven't decided yet if I'm going to do a transparent blue or a frosted, but I'm leaning toward frosted as this mod doesn't exactly focus on the coolness of computers (just computer mods).

The grass is probably just going to be the case side painted green and possibly textured. Maybe get two or three good coats of the color I want, then alternate a lighter shade and the same shade in two super quick coats and use a cotton ball as its drying to pop in up. Just an idea though.

For the rest of the landscaping I'm going to just use what I find at local hobby stores. I could probably get a big set online for fairly cheap, but if I don't use all of the stuff in a set then I'll probably never use it again. There are a few local train and hobby stores, so it shouldn't be hard for me to find something unique for the project.

Once again, I'm super afraid this case can go from cool to cheesy in a matter of seconds, so I'm trying as hard as I can to keep it clean and fresh with the design and materials. If you have any product suggestions or general ideas for the sides let them fly.

I should be getting the camera this week, so you'll have pics to base your suggestions on soon.

[Datech]

If it's not going to be a low-profile computer, why go with that cooler? (If it is, nice.)

Not sure I understand you. Are we talking about the CPU cooler or the case fan?

If you mean the CPU cooler, feel free to suggest another one. This is the first time I've done anything that wasn't an Intel 775 chip. I just found the first decent rated cooler for my chip on Newegg and went with it.

If you mean the big 120mm case fan on in the center, it seemed appropriate to me. This is still going to be a basic computer shape, and case fans in the side like that don't exactly hurt. Plus, what better to fill the spot of a big circular pool than a case fan that surprisingly fits the dimensions really well? When I was basing the CAD drawing on the overhead shot I was afraid of what the final measurements of the pool would be in relation to the garden. Turns out it was right at 112mm, which is good enough for me for a 120mm fan.

Another thing I haven't mentioned yet: I plan on mounting the case on top of some stylish Victorian-type feet, possible ball and claw style. This will let the case stand off its resting place a bit and allow a little extra airflow out the unseen bottom part.

[Datech]

So between my website and starting to get jobs for my Need A Techie service I finally got a chance to do an update here.

First off, I'm beginning to get quotes back from cutters. So far all of them are waterjet cutters, but it has been suggested that I seek plasma cutters and other machinists. The quotes so far range from $110-$155, so we'll see where the final one lands.

Second: Pictures!!! Ok, they aren't really that exciting. It's just the case I'll be modding and the gear I have so far. If you are reading this and not just looking at the pics, please respond to the questions I have for each pic.

The case:
http://img154.imageshack.us/img154/6076/computerneedatechie018.jpg

The back and side where the window will be:
http://img81.imageshack.us/img81/8108/computerneedatechie020.jpg

Front. The arch on the side is where I plan to model an Arc de Triumph. Now that you see the front, feel free to throw other ideas out for it. What should I do with the drive bays? Maybe the ornamental Gates of Versailles?:
http://img301.imageshack.us/img301/4835/computerneedatechie021.jpg

Arc Close Up:
http://img386.imageshack.us/img386/2685/computerneedatechie022.jpg

This is the bottom of the case as a tower. Since I'm doing a desktop, this is going to have to be painted and prettied up. What do you think I should do with it?:
http://img518.imageshack.us/img518/2902/computerneedatechie023.jpg

The back of the front bezel. :
http://img134.imageshack.us/img134/481/computerneedatechie024.jpg

Apparently this little crystal lights up as it has molex connectors. I would assume a blue LED, but I haven't plugged it up yet. This could be beneficial for the arc and power button:
http://img257.imageshack.us/img257/4189/computerneedatechie026.jpg

Again:
http://img81.imageshack.us/img81/1880/computerneedatechie027.jpg

Graphics card:
http://img209.imageshack.us/img209/6609/computerneedatechie029.jpg

Mobo:
http://img79.imageshack.us/img79/9146/computerneedatechie031.jpg

CPU:
http://img526.imageshack.us/img526/659/computerneedatechie033.jpg

PSU:
http://img524.imageshack.us/img524/7059/computerneedatechie035.jpg

RAM:
http://img291.imageshack.us/img291/3230/computerneedatechie036.jpg

That's it for now. I'll hopefully do the photoshop concepts tomorrow night. I'm liking the idea of the arc on the left with the power button and the golden gates overlaying the drive bays. Let me know what you think.

[Datech]

Long awaited update! For those of you that know me a bit more personally you know I've been trying to tie up a lot of loose ends lately. However, I finally have time to mod again, and I will be working on this case non stop til Wednesday. Also, for the pics this time I resized em so you won't have to worry about 1.6MB photos. Without further ado, here's what I've got so far:

Got some new toys and materials. I bought a mini vice and a nice little Xacto kit for half price at hobby lobby. I also got some florist foam and some other, denser foam for help with the arc:
http://img199.imageshack.us/img199/6263/013hoh.jpg

Teehee florist foam:
http://img5.imageshack.us/img5/7050/014wih.jpg

Turns out this vice is almost useless because of the size of the arc:
http://img200.imageshack.us/img200/2324/021ljj.jpg

Lovely little triple tool, 10 attachment Xacto set:
http://img199.imageshack.us/img199/3613/018xbw.jpg

The dense foam and a miniature Arc I got in France when I was in 8th grade:
http://img8.imageshack.us/img8/8931/020vrk.jpg

Had to use two pieces of foam to make the base of the arc:
http://img10.imageshack.us/img10/3352/022dhr.jpg

Went and got some more toys today. Borrowed the future father-in-laws super Dremel set, picked up some Great Stuff, Bondo, nice LED flashlights, bigger vicegrips, and a decorative candle holder (upside down)!
http://img9.imageshack.us/img9/2346/gardensofversailles001.jpg

So what am I going to do with decorative candle holders? Mod it of course!
http://img198.imageshack.us/img198/9755/gardensofversailles002.jpg

What I did was cut the legs off the candle holder and split it into four separate feet. Since there were anomalies in the original mold there were bubbles and air pockets when I cut the thing open, so I used my newly found Bondo and Dremel skills to round those out:
http://img9.imageshack.us/img9/5589/gardensofversailles003.jpg

I will use the decorative feet on the corner of the case for a nice stand off:
http://img14.imageshack.us/img14/1050/gardensofversailles006.jpg

I'm also going to use the part that actually holds the candle to support the center of the case:http://img198.imageshack.us/img198/530/gardensofversailles010.jpg

Here is my workshop, on my small balcony at my new apartment:
http://img269.imageshack.us/img269/1813/gardensofversailles011j.jpg

One step of the bondo job on the Arc:
http://img5.imageshack.us/img5/5681/gardensofversailles013.jpg

I've pretty much finished the bondo on the arc now, but I'm going to give the inside one more coat and sand it a bit more before another pic. Instead of telling you what I'm going to do next, I'm just going to promise you that I'm going to keep working tomorrow and post more pics tomorrow night.

Teaser: I decided what I'm going to do with the sides, and it should be awesome!

[Datech]

I'm having a hard time getting this arc how I want it. Spent a lot of time on it today, so I really don't have many pics. I took the main case side to the waterjet cutter today though, should have that back next week. Yay!

Did a little work on the bottom. What the 'bottom' was:
http://img40.imageshack.us/img40/9755/gardensofversailles002.jpg

Mockup. I filled in the holes on the feet, and I tried to get them level. Without a belt sander I'm at a loss for a way to get all the pieces perfectly flat together.
http://img14.imageshack.us/img14/5589/gardensofversailles003.jpg

Standing mockup. Looks awesome IMO:
http://img14.imageshack.us/img14/8613/gardensofversailles004.jpg

Case front before:
http://img14.imageshack.us/img14/8130/gardensofversailles005.jpg

After:
http://img268.imageshack.us/img268/1050/gardensofversailles006.jpg

Sanded it a bit more, this is where the arc will go:
http://img268.imageshack.us/img268/530/gardensofversailles010.jpg

That's some great stuff!
http://img268.imageshack.us/img268/2285/gardensofversailles008.jpg

This is where the design of the arc will go:
http://img268.imageshack.us/img268/5947/gardensofversailles009.jpg

Little more bondo, got a lot more to do:
http://img11.imageshack.us/img11/8062/gardensofversailles011.jpg

I've got some big stuff to do to this case tomorrow, I'm stoked. Hopefully it will turn out well.

[Datech]

Ok, so super fun updates!

All taped up:
http://img8.imageshack.us/img8/2346/gardensofversailles001.jpg

The first freehand one:
http://img8.imageshack.us/img8/9755/gardensofversailles002.jpg

Took me about 10 minutes to draw these:
http://img8.imageshack.us/img8/5589/gardensofversailles003.jpg

30 minutes later:
http://img3.imageshack.us/img3/8613/gardensofversailles004.jpg

About two hours later:
http://img199.imageshack.us/img199/7794/gardensofversailles007.jpg

I spray painted it a nice gold, and I think if turned out well. Special thanks to Luke122 for turning me on to the design:
http://img15.imageshack.us/img15/530/gardensofversailles010.jpg

Here is the material I'm going to cover the sides in:
http://img199.imageshack.us/img199/2285/gardensofversailles008.jpg

I'm headed out on vacation soon, so I won't have time to put the wrap on or take pics of the finished front. I also bought a two stage gold crackle spray paint to do the feet with, and that should turn out well too.

[Datech]

Update!

The incredible watercut I got from Atlantis Waterjet!
http://img269.imageshack.us/img269/2346/gardensofversailles001.jpg

http://img25.imageshack.us/img25/5589/gardensofversailles003.jpg

Leo helping again:
http://img27.imageshack.us/img27/9755/gardensofversailles002.jpg

Trying to put the covering on:
http://img27.imageshack.us/img27/8613/gardensofversailles004.jpg

http://img44.imageshack.us/img44/7794/gardensofversailles007.jpg

http://img25.imageshack.us/img25/2285/gardensofversailles008.jpg

http://img17.imageshack.us/img17/10/gardensofversailles014.jpg

http://img17.imageshack.us/img17/8098/gardensofversailles015.jpg

Base coat of green:
http://img19.imageshack.us/img19/5947/gardensofversailles009.jpg

Looks damn good on the case:
http://img10.imageshack.us/img10/530/gardensofversailles010.jpg

Slight mockup:
http://img11.imageshack.us/img11/4120/gardensofversailles011m.jpg

Trees I'm considering for the case:
http://img17.imageshack.us/img17/5681/gardensofversailles013.jpg

Mockup with the vinyl:
http://img35.imageshack.us/img35/8366/gardensofversailles016.jpg

http://img35.imageshack.us/img35/2682/gardensofversailles017.jpg

I started masking off the areas for the second coat, but ended up peeling a small piece of paint off because I'm impatient. More to come tomorrow hopefully!

[Datech]

So time for an update.

First we will take a slight detour and I'll show you what we worked on last weekend. Crappy old folding table, completely sanded (by hand):
http://img14.imageshack.us/img14/9755/gardensofversailles002.jpg

My buddy doing us justice:
http://img14.imageshack.us/img14/6573/gardensofversailles003t.jpg

Finished project:
http://img14.imageshack.us/img14/7820/gardensofversailles004h.jpg

http://img14.imageshack.us/img14/1006/gardensofversailles005k.jpg


Ok, now back to your regularly scheduled program! So I had some problems painting the top of the case. Basically, I didn't take the time to sand the thing and I was just putting layer after layer of paint on top of paint. It kinda went like this:
http://img269.imageshack.us/img269/1050/gardensofversailles006.jpg
http://img200.imageshack.us/img200/7794/gardensofversailles007.jpg
http://img14.imageshack.us/img14/2285/gardensofversailles008.jpg
http://img14.imageshack.us/img14/5947/gardensofversailles009.jpg
http://img8.imageshack.us/img8/530/gardensofversailles010.jpg
http://img193.imageshack.us/img193/8062/gardensofversailles011.jpg
http://img269.imageshack.us/img269/6858/gardensofversailles012.jpg
http://img200.imageshack.us/img200/5681/gardensofversailles013.jpg
http://img195.imageshack.us/img195/10/gardensofversailles014.jpg

So I gave up for a day or two and worked on the front of the case.
http://img269.imageshack.us/img269/8098/gardensofversailles015.jpg
http://img8.imageshack.us/img8/8366/gardensofversailles016.jpg

Leo helped:
http://img132.imageshack.us/img132/2682/gardensofversailles017.jpg

I also became extremely frustrated with my arc. I learned that unless you have a bunch of straight edges to push the bondo up against, it is really hard to sand bondo straight. I bought some cheap Lexan sheets at Home Depot and I'm going to make the skeleton out of that. Primer should be a good color for it, and the great stuff will be used for the molding:
http://img193.imageshack.us/img193/1874/gardensofversailles019.jpg

Time to go back to the top. I sat down, and in about an hour I had it sanded down to this:
http://img132.imageshack.us/img132/3946/gardensofversailles020.jpg

Since the cutout is so delicate I didn't bother sanding it too much and went ahead with the painting:
http://img132.imageshack.us/img132/6913/gardensofversailles021.jpg
http://img22.imageshack.us/img22/6128/gardensofversailles022.jpg
http://img132.imageshack.us/img132/5761/gardensofversailles023.jpg

Wonder how its gonna turn out... Lets take a look at the new hardware real quick! Xoxide had a good deal on a supposedly super silent cooler for AM2's, so I bought that and an LED fan and got them in today:
http://img8.imageshack.us/img8/5746/gardensofversailles024.jpg
http://img269.imageshack.us/img269/1622/gardensofversailles025.jpg
http://img8.imageshack.us/img8/3973/gardensofversailles027.jpg
http://img31.imageshack.us/img31/3083/gardensofversailles028.jpg
http://img31.imageshack.us/img31/7263/gardensofversailles029.jpg
http://img8.imageshack.us/img8/8792/gardensofversailles030.jpghttp://img132.imageshack.us/img132/6320/gardensofversailles031.jpg
http://img8.imageshack.us/img8/1256/gardensofversailles033.jpg

I might do a review on the cooler as it seems super interesting. I also picked up a hard drive and DVD drive finally. I have yet to decide exactly how I'm going to integrate the optical drive. I'll work on that tomorrow most likely.

On a related note, I feel really good about my color choices so far:
http://img200.imageshack.us/img200/3978/gardensofversailles038.jpg

OMG, whats this? I actually did it right?
http://img132.imageshack.us/img132/7821/gardensofversailles039.jpg

Well, much better than I had done, but there are a few spaces I need to touch up. No worries though, it works for me.
http://img132.imageshack.us/img132/6285/gardensofversailles040.jpg

And her:
http://img198.imageshack.us/img198/6160/gardensofversailles042.jpg

More to come later!

[Datech]

Another update! Tomorrow my mom's birthday, and I will hopefully have it done by next weekend.

Got the plexi in:
http://img512.imageshack.us/img512/2346/gardensofversailles001.jpg
http://img512.imageshack.us/img512/9755/gardensofversailles002.jpg

Tried to get a pattern to cut out:
http://img5.imageshack.us/img5/8130/gardensofversailles005.jpg

This was the best solution I had, support the glass with a bowl, center the cutout in the bowl, cut.
http://img5.imageshack.us/img5/2285/gardensofversailles008.jpg

The bowl thing worked, the free hand saber cut didn't really work. I'll fix it later.
http://img508.imageshack.us/img508/5947/gardensofversailles009.jpg
http://img217.imageshack.us/img217/530/gardensofversailles010.jpg

Hey, where'd all that tape go? Thank you Guerrilla Glue! Case sides are now done.
http://img5.imageshack.us/img5/8062/gardensofversailles011.jpg
http://img5.imageshack.us/img5/6858/gardensofversailles012.jpg
http://img5.imageshack.us/img5/8818/gardensofversailles013s.jpg
http://img508.imageshack.us/img508/10/gardensofversailles014.jpg

I also completely redid the arc, here is the proof of concept.
http://img214.imageshack.us/img214/8098/gardensofversailles015.jpg
http://img5.imageshack.us/img5/8366/gardensofversailles016.jpg

But how, pray tell, should I construct the actual arc? I didn't have a lighter, so I tried a frying pan and some aluminum foil.
http://img5.imageshack.us/img5/2682/gardensofversailles017.jpg

Worked perfectly:
http://img5.imageshack.us/img5/1874/gardensofversailles019.jpg
http://img218.imageshack.us/img218/6913/gardensofversailles021.jpg

And once again, thank you Geurilla Glue!
http://img514.imageshack.us/img514/5761/gardensofversailles023.jpg
http://img5.imageshack.us/img5/1622/gardensofversailles025.jpg

Since the sides weren't all perfectly seated I reinforced it with a little bondo work:
http://img530.imageshack.us/img530/5388/gardensofversailles026.jpg

Fits well:
http://img5.imageshack.us/img5/3973/gardensofversailles027.jpg

I then sanded all the sides down and made everything nice and flush:
http://img137.imageshack.us/img137/3083/gardensofversailles028.jpg
http://img137.imageshack.us/img137/4116/gardensofversailles032.jpg

Check the difference:
http://img5.imageshack.us/img5/1256/gardensofversailles033.jpg
http://img5.imageshack.us/img5/4497/gardensofversailles034.jpg

I still have two other little panels to put in on the thing, but they should come easily. Once I put those on I'll take the time to decorate the arc and hopefully call it finished. After that, finish the front of the case, make sure the top fits, get the glass cut how I want it and secured, then actually put the components in, then its done!

Yea... next week...

[Datech]

Ok, I'm not going to lie. I'm starting to get really frustrated with this case. It is almost all together and I'm completely unsatisfied with it. Now that you have my bias before looking at the pics, see for yourself and make a decision:

Started out trying to find a way to get ledges on the arc:
http://img3.imageshack.us/img3/9755/gardensofversailles002.jpg

http://img140.imageshack.us/img140/7794/gardensofversailles007.jpg

I then glued the leather down to the front of the case. The effect is still good but I need to redo the corners:
http://img4.imageshack.us/img4/2285/gardensofversailles008.jpg

Ending up getting pissed at all the gaps and cracks in the arc, ripped the crappy ledges off and called it quits on them and filled the thing with Great Stuff in the hopes of coming out with a clean product:
http://img54.imageshack.us/img54/5947/gardensofversailles009.jpg

Sadly the expanding only created more cracks that I have yet to figure out how to fill. Didn't take pics of them though.

Painted the ring around the power button gold:
http://img3.imageshack.us/img3/9061/gardensofversailles018.jpg

Test fit:
http://img4.imageshack.us/img4/1874/gardensofversailles019.jpg

Got it in there nicely:
http://img4.imageshack.us/img4/6913/gardensofversailles021.jpg

Testing:
http://img3.imageshack.us/img3/1622/gardensofversailles025.jpg

http://img54.imageshack.us/img54/3083/gardensofversailles028.jpg

Glued down the panels and trimmed the edge close to the arc:
http://img4.imageshack.us/img4/1256/gardensofversailles033.jpg

Cut out the unnecessary bays that would be in the way of the fan. Took me two reinforced dremel bits and 15 minutes with some super sharp wire cutters:
http://img4.imageshack.us/img4/7263/gardensofversailles029.jpg

http://img54.imageshack.us/img54/8792/gardensofversailles030.jpg

I got frustrated so I went to the "I don't know what I'm doing so I'm going to doodle until something nice shows up" phase:
http://img190.imageshack.us/img190/3597/gardensofversailles041.jpg

http://img3.imageshack.us/img3/2836/gardensofversailles044.jpg

Once I come up with an idea for putting that design on the arc effectively it will look similar to that.

Here is where I start to get super frustrated, it just isn't coming together the way I wanted to:
http://img3.imageshack.us/img3/2169/gardensofversailles045.jpg

http://img190.imageshack.us/img190/4126/gardensofversailles046.jpg

I did a pretty decent job hand sanding all these pieces to the same height and level. The feet are pretty flush, and the base is about a millimeter or two short but that will provide give for the center weight when it is all together:
http://img268.imageshack.us/img268/8889/gardensofversailles047.jpg

And again, super unsatisfied with this thing so far:
http://img216.imageshack.us/img216/9438/gardensofversailles048.jpg

http://img3.imageshack.us/img3/6918/gardensofversailles049.jpg

The sides just look too high for the case, maybe I should have taken the advice to keep it as a tower and do both sides as a cutout... idk, maybe it'll get better tomorrow...

[Datech]

Well you gotta remember this was a birthday present for my mom, and her birthday was last weekend. I changed some things though, and I'm getting happy with it. Delivery date is tomorrow, so I will have finishing and delivery pics up tomorrow and I'll be done with this dang thing.

[Datech]

Alright, barring the final photos at my mom's place, this case is done. I'm happy with it now. You guys and the work Girlfriend did helped me come back to liking the case. In some respects it is better than what I had envisioned from the beginning, but in others I feel I could have done much better. It is far from the professional and clean cut case I was striving for, but as we all know time delays and time crunches don't always bring out our top manufacturing skill (especially when you're only using a Dremel for 90% of the work). Either way, the case is finished, and it came out ok. I'll let you guys judge from the pics below.

Started out trying to come up with a fan grill since it was Friday and an Xoxide one wouldn't be here until Tuesday.
http://img29.imageshack.us/img29/3083/gardensofversailles028.jpg

Gave up and just cut a hole.
http://img200.imageshack.us/img200/7263/gardensofversailles029.jpg

Super glued it and eventually taped the edges as well.
http://img198.imageshack.us/img198/6918/gardensofversailles049.jpg

Works out just fine.
http://img269.imageshack.us/img269/5840/gardensofversailles051.jpg

Super glued the fan in as well so I didn't have to worry about screw holes.
http://img269.imageshack.us/img269/938/gardensofversailles052.jpg

Test run in the light shows a nice blue glow.
http://img269.imageshack.us/img269/4430/gardensofversailles054.jpg

Installed mobo.
http://img200.imageshack.us/img200/4497/gardensofversailles034.jpg

The RAM setup on this mobo is weird. The clips are different on the two sets of DIMMs, and the recommended RAM setting for two sticks is 3,4,1,2 (y,y,r,r) instead of the more common 1,3,2,4 or the common sense 1,2,3,4. Oh well, works fine.
http://img233.imageshack.us/img233/6907/gardensofversailles037.jpg

This Gelid cooler really is incredibly quiet. I didn't Prime the CPU, but I can imagine that the variable fan keeps it perfectly cool and still completely silent. I wish I had time to review it but the case is headed off and I'm not taking a chance with the 60mm stock HSF. For those that care, Gelid receives my complete endorsement.
http://img233.imageshack.us/img233/6744/gardensofversailles043.jpg

Wire managing is so much easier with a 500W PSU.
http://img233.imageshack.us/img233/9438/gardensofversailles048.jpg

Found the perfect textured gold for the bottom that most people will never see.
http://img269.imageshack.us/img269/1820/gardensofversailles055.jpg

http://img233.imageshack.us/img233/8032/gardensofversailles058.jpg

http://img198.imageshack.us/img198/8580/gardensofversailles062.jpg

http://img233.imageshack.us/img233/3487/gardensofversailles059.jpg

The biggest change is that we decided to paint the arc the same gold color. This makes the arc stand out less than if it were still primer, gives it a gloss to match the case, and lets us worry less about the artwork that would make it look like a proper Arc de Triumphe but still retain the symbolism of the Paris landmark.
http://img514.imageshack.us/img514/9098/gardensofversailles069.jpg

Then awesomeness happened.
http://img514.imageshack.us/img514/5010/gardensofversailles074.jpg

http://img200.imageshack.us/img200/6793/gardensofversailles076.jpg

So, now for final pictures! First we start out in complete darkness:
http://img233.imageshack.us/img233/5205/gardensofversailles078.jpg

http://img269.imageshack.us/img269/9186/gardensofversailles080.jpg

Lights please!
http://img3.imageshack.us/img3/4825/gardensofversailles084.jpg

http://img5.imageshack.us/img5/7098/gardensofversailles085.jpg

http://img233.imageshack.us/img233/9529/gardensofversailles087.jpg

http://img514.imageshack.us/img514/2370/gardensofversailles086.jpg

Placed the trees on there just to see. Girlfriend likes them, I'm skeptical and think I need 8 more, two more in the center of each side, but we decided to let my mom decide tomorrow.
http://img514.imageshack.us/img514/4296/gardensofversailles088.jpg

Tomorrow I will have final setup pictures and a wrap up of my thoughts (don't worry, you won't be quizzed, just enjoy the pretty pics, Oneslowz28 never proofreads articles or worklogs when I ask him to either). Hope you all enjoyed the quick and fairly painless mod so far, and I hope I can increase my product quality from here on out.

[Datech]

One thing - the last photo appears to show rough, unpainted plastic edges around the top of the archway? Are those just the flash, or are you planning on sanding 'em a bit and touching 'em up with a brush (or even a Sharpie) when you get a chance?

That was mostly the flash. In trying to smooth the edges of the Lexan I ended up cutting into them in some places. To the naked eye the paint did a good job covering it all, but the flash brought it out there. I honestly didn't notice it was like that until you pointed it out, IRL or in the pic.

But, it is finally finished, delivered, setup, and in use! I know my mom genuinely liked it and appreciated the effort even if the box didn't have the wow factor we all hope for. She was definitely very appreciative of the components inside, which were a huge improvement over her P4 with 512MB of RAM. Her Windows Experience rating actually came out to a 4.9, and that came from the graphics card. All the rest were high fives with the RAM coming in at 7.1 on the new 7.9 scale for Windows 7.

Here are the final pics. Setting up:
http://img268.imageshack.us/img268/7770/gardensofversailles089.jpg

She ended up liking the trees. She also got the idea to go to the local train and hobby stores herself and decorating the top how she wants. I told her to take pics if she did that and let us know how it evolves over time:
http://img5.imageshack.us/img5/8840/gardensofversailles090.jpg

http://img3.imageshack.us/img3/7031/gardensofversailles091.jpg

http://img199.imageshack.us/img199/945/gardensofversailles092.jpg

http://img29.imageshack.us/img29/1274/gardensofversailles093.jpg

Yay Windows 7!
http://img5.imageshack.us/img5/4180/gardensofversailles096.jpg

Thanks to everyone who helped with this case and also thanks to those who gave me encouragement throughout this worklog. This was definitely my burnout case that I should have completed over a longer period of time, but oh well, I can always go back and modify it later (after a 3 hour trip to South Carolina to pick it up, of course). Enjoy!

Link to original thread. (http://www.thebestcasescenario.com/forum/showthread.php?t=19340)