Raceface
09-16-2009, 09:55 AM
http://www.abload.de/img/blood_raven_001djvgd81j.jpg
Hardware inside:
i7 920
Prolimatech Megahalems
Foxcoon Flaming Blade GTI X58
6144 MB Corsair Dominator PC3-1600 KIT CL7 + Benny Flames
XFX HD 5870
Enermax Modu 82+
2x Samsung 1TB
1x OS Platte WD Raptor 150GB
3x Scyhte Himura
LG GGW H20L Super Multi Blue
Silverstone Raven SST-RV01B-W
MDPC-X Sleeve overall (black and red)
Case Modīs:
Blue front lighting is substituted with a red LED
The rail or strip as fixtures for the PCI maps is intended, gets one
new stroke (Blood Raven or Raceface)
Red accents will find themselves in the inside of the case.
Mesh is varnished (sides and in the lid)
Lighting with red LED's
NT gets a fan with red LED's
Tilting counter under the I/O Panel for the lighting
Front door gets a Window enclosed with an engraving (is not certain yet)
State foot lighting in red (is not certain yet)
All not used holes are closed
To the rear one more fan (three Fan's walks in puff and everything again out) I like overpressure
HDD Cages come out (HDD's incl. Himura's come upwards)
And still thus something more.....
Into the bargain an order with MDPC-X (Nils, I come)
Black, grey and white.
Pic's always in this post, so that one must not look in the whole Thread
Improvement suggestions or changes in the Case are seen with pleasure.
Edit:
Waiting for Case and parts.........
Raceface
Hardware inside:
i7 920
Prolimatech Megahalems
Foxcoon Flaming Blade GTI X58
6144 MB Corsair Dominator PC3-1600 KIT CL7 + Benny Flames
XFX HD 5870
Enermax Modu 82+
2x Samsung 1TB
1x OS Platte WD Raptor 150GB
3x Scyhte Himura
LG GGW H20L Super Multi Blue
Silverstone Raven SST-RV01B-W
MDPC-X Sleeve overall (black and red)
Case Modīs:
Blue front lighting is substituted with a red LED
The rail or strip as fixtures for the PCI maps is intended, gets one
new stroke (Blood Raven or Raceface)
Red accents will find themselves in the inside of the case.
Mesh is varnished (sides and in the lid)
Lighting with red LED's
NT gets a fan with red LED's
Tilting counter under the I/O Panel for the lighting
Front door gets a Window enclosed with an engraving (is not certain yet)
State foot lighting in red (is not certain yet)
All not used holes are closed
To the rear one more fan (three Fan's walks in puff and everything again out) I like overpressure
HDD Cages come out (HDD's incl. Himura's come upwards)
And still thus something more.....
Into the bargain an order with MDPC-X (Nils, I come)
Black, grey and white.
Pic's always in this post, so that one must not look in the whole Thread
Improvement suggestions or changes in the Case are seen with pleasure.
Edit:
Waiting for Case and parts.........
Raceface