Victorian Renaissance

[Cheron]

Another year…

As some of you know. I quit my project Fallout 2.1, and told back then that I was planning something new. A project I call: Victorian renaissance. This isn’t the name this modification will get when I finish it. I am still debating on a name that suits a project like this.
Let’s start revealing some things I have so far. Some of you have probably noticed I had a link in my signature. This linked to a Wikipedia page, for those who have missed it here is the link again--here-- (http://en.wikipedia.org/wiki/Neo-Victorian). Since I have changed it to link to this thread. But I could have linked it to this Wiki page just as easy--here-- (http://en.wikipedia.org/wiki/Steampunk).

Now we know what I seem to have in mind, let me tell you some facts.
I Have an Antec P182 case and I have disassembled it completely. With this done I could Reassemble it again using Google Sketch Up to the mm accurate. This helped me a lot in my design. Since I could undo designs that didn’t work for me. Here is a very early render and it has changed since. Ill post newer versions later this week.

http://farm5.static.flickr.com/4024/4429080079_82a45a4fe7_o.jpg
Rendered with the open source rendering program Kerkythea.

Hardware,
It won’t be revolutionary since I won’t be upgrading my current pc as I see no need to do so.
My current hardware:

CPU: AMD phenomII 940 Black Edition
GPU: Nvidia XFX GTX260 Black Edition
Mem: 4x 2Gig. DDR2 1066 GEIL Black Dragon
HD1: 80 Gig. Intel Postville G2 SSD
HD2: 320 Gig. WD Scorpio Black 2,5 Inch or maybe I’ll be able to include my 300 Gig WD Velociraptor
PSU: 750 watt Corsair HX750W (which is modular)

There is one upgrade possibility, and that is in the GPU department I would love to add a twin of my GTX260.

Cooling,
As seen on the render I made, I plan on water cooling I think it’s a must for any modified case out there. But that is just my opinion.
I’ll be using:

CPU Block: D-TEK FuZion v2
Rad1: Black Ice GT Stealth 120
Rad2: Black Ice GT Stealth 360
Pump: Laing D5 Revision 2 Variable Speed with Ek Top (As seen in the render)
Res: EK-Multioption reservoir 250

Also I’d like to add scythe copper memory heat spreaders (more for looks).

Design,
You are probably brainstorming as to what I am planning, I will not let you wait any longer. let me give you 5 points I will be working around.

Copper, brass and flat black.
Motherboard cover. One that will pull eyes to the parts I would like to be seen.
Overkill Water cooling. (yes its only for the CPU, it got a little hot past summer had to clock it down from 3.8 GHz way back to stock 3.0 GHz. It won’t happen again when this is finished.)
Clean look, No visible HD (Ok maybe one) and as far as possible no wires shown(and where they are visible still nice and tidy)
And yes you could have guessed, it will be Steampunk.


So far so good, I say thanks for reading.
Yours Cheron.

[SXRguyinMA]

this looks neat :up:

[Cheron]

@SXRguyinMA Thanks and I hope it will become neat too.

[Cheron]

As promised.

http://farm5.static.flickr.com/4047/4429845254_8e48943524_o.jpg
http://farm3.static.flickr.com/2653/4429080219_fc2f3e26ce_o.jpg
http://farm3.static.flickr.com/2745/4429845420_206b4e5b2a_o.jpg
Rendered with the open source rendering program Kerkythea.

I hope you all see what I am up to... and as you can see I'll wont be starting
on the actual case till I truly sure where to cut the holes. all sugestions are welcome and ill try some out if I like them.

and before I forget. I like to credit: Ronski for the pump model for sketchup and Legoman666 for the radiators.

Yours
Cheron.

[billygoat333]

sweet renderings! :) cant wait to see it started. oh and its spelled renaissance btw. :D

[Cheron]

@billygoat333 Thanks for pointing out the spelling error. Ill chance it, but I cant change the thread name. if someone who can change the name reads this, would you please change it. Thanks in advance.
And I'll start on the first few things in a few weeks.

[OvRiDe]

@billygoat333 Thanks for pointing out the spelling error. Ill chance it, but I cant change the thread name. if someone who can change the name reads this, would you please change it. Thanks in advance.
And I'll start on the first few things in a few weeks.

Fixed! Looking forward to seeing this one progress!

[Cheron]

now we have seen the renders we all know the basics of what I am up to.
now let us move to the real thing. as I mentioned earlier I had taken it apart so I could make an exact copy of the case in sketch-up. Now I have reassembled it for the moment. have a look.
http://farm3.static.flickr.com/2706/4429846646_cde6db6e9a_o.jpg
http://farm5.static.flickr.com/4046/4429846422_d6df305382_o.jpg
http://farm5.static.flickr.com/4059/4429080697_fafbd4d508_o.jpg
http://farm3.static.flickr.com/2741/4429081363_953bc7cc9b_o.jpg

Just some pictures the cutting will start soon.
there are more pictures you can find em here-->my flickr (http://www.flickr.com/photos/23633848@N06/sets/72157622188016698/with/4262907397/)<--
stay close
yours Cheron

[slaveofconvention]

OOh Deja Vu - I have one of those sitting spare in the house - might inspire me lol - altho I have enough to finish before I start something new.

Looking forward to this one...

[Mark_Hardware]

Can't wait to see some progress Cheron I like your artistic style

[Cheron]

Can't wait to see some progress Cheron I like your artistic style
Thank you very much. that is a real moral booster.

[Oneslowz28]

Check this out http://www.thebestcasescenario.com/frontpage/?q=node/452

[DonT-FeaR]

this should be good :)

[p0Pe]

now this is a mod i will follow:D i modded the p190 myself, and they are touch to cut in!
gl man!

[Waynio]

Count me in on a subscription :), I'll have to take a look at the plugin for sketchup also, all the best Cheron :up:.

[Cheron]

Now that is a real moral booster. (http://www.thebestcasescenario.com/f...ge/?q=node/452)
To the people who cant wait to see how I have done. sorry its still to cold to venture out to my trusty workshop just yet. but since the weather here is improving, ill be hopefully in the workshop next week. trying to get the top panel cut so I can mount the 360 rad.

[Cheron]

measurements are made need to start on the cutting. after that a first pic update also I have send out my drawings to a waterjet cutter and he will be making my copper window trim for the sidepanel.

[madd0ct0r]

I'm watching eagerly.

[Kayin]

I was glad to feature you-your design interested me, and I really wanna see how this goes.

I've modded a P180 before, so I know a bit of your pain.

[Cheron]

And finally he starts off....

It has been some time but I finally started to work on this project. Ill keep it short and move quickly to the pictures.
Since you know what I am up to with the skeleton of the case. I started on the side window, I am half way on finishing this.

http://farm3.static.flickr.com/2773/4429082359_b2f276703c_o.jpg
This is what I picked up today, its a copper trim special made for me. Wanna know where it will end up, scroll down and watch the pictures.

http://farm5.static.flickr.com/4016/4429081903_a9012195a4_o.jpg
http://farm5.static.flickr.com/4041/4429847422_1e79f80060_o.jpg
As you can see I need to polish it. This I'll do in a later stadium.

http://farm5.static.flickr.com/4018/4429082119_0e5278bcc2_o.jpg
Needless to say... Cutting the window.

http://farm3.static.flickr.com/2771/4429082743_b5e784af18_o.jpg

And now... This is the ''what it will become'' Impression.

http://farm3.static.flickr.com/2737/4429847834_d942b7484a_o.jpg

Till next time.
Yours Cheron.

[billygoat333]

oooh... me likey the window! :D

[msmrx57]

I love that look. It reminds me a little bit of the turret (not positive thats what it is) on the Millenium Falcon. Only a little thought. Has the feel of a fancy leaded window. :up:

[billygoat333]

funny I was thinking it looked Star Wars-y and I couldn't place why. haha that makes sense, it does look like the Millennium Falcon.

[Cheron]

lol It was mentioned also Work at today. but no... it was based a lamp in the main hall of the natural history museum in London.

http://farm5.static.flickr.com/4030/4429844366_344c5668a6_o.jpg
http://farm3.static.flickr.com/2687/4429079873_a4d1baca75_o.jpg
http://farm5.static.flickr.com/4012/4429081093_27a778117b_o.jpg

This was a goldmine for inspiration.

[Cheron]

I have some bad news.... and I am not killing this project.... I have to rebuild my cars engine(arrrggggg)....And this is draining my money for this project so instead big changes to the chassis. ill be working on smaller stuff for this mod. like the resevoir and dvd-drive.

And I have to warn you all, this is going to be a really slow build from this moment on.

[Kayin]

Cheron, you aren't the only one to ever have a financial crisis.

I'm building the Bat while going through a divorce. These things do happen.

[msmrx57]

It may take you longer to build it, but we'll still be waiting to see it. I sympathise completely, I just had to replace the motor in our car in October.

[Cheron]

Thanks for understanding. I just wanted you all to know. but since I have still loads of things I kan do lets focus on those for the upcomming weeks. I'll be starting on the cuts that i have to make for the Resevoir. It will be nice to see how that works out. keep you tumbs up for me. and you all be getting a nice update for the weekend.

Yours Cheron.

[artoodeeto]

wow....I need to go to that museum. I adore gothic style architecture, even started a 3d cathedral model in maya years ago (sadly it finished off my computer before I could finish the model, it got super complex). Nice to see someone use that sort of thing for inspiration! my first thought on your window is it looks like a TIE fighter cockpit window, but seeing the photo of the lamp I understand where the idea came from. Good job! looking forward to seeing more!

[Cheron]

Hello there I got an awful lot of cutting done yesterday. but not yet done.

Wile talking to an fellow employee today at work I decided not to laser cut anything. We agreed that the Soul or character of an Object is in the imperfections that the maker of the object left. With this in mind I'll be crafting everything myself from sheet metal or I should say sheet brass.

now on to what I have done.

Since some of you warned me for the hard time I would get cutting my P182. I decided to drill an awful lot of holes with my drill-press to weaken the P182, on the places I would be cutting anyway. This also helped me keep the length I was making noise(next door they have a newly born and I am on a good foot with my neighbors).

http://farm5.static.flickr.com/4039/4429848062_fe1ddfc3b0_o.jpg

After Drilling all the holes I cut it with my Dremel. and did some grinding to give em a smooth edge.

http://farm5.static.flickr.com/4057/4429083393_a8cdcbfc68_o.jpg

And then this.... its an rubber trim to get rid of the sharp edge.

http://farm5.static.flickr.com/4008/4429848842_cb677348f1_o.jpg

And a test fit....

http://farm5.static.flickr.com/4018/4429849034_4d1d7913ed_o.jpg

And you could have guessed it. The location of my Reservoir.

http://farm5.static.flickr.com/4048/4429083613_130d9c31cc_o.jpg

The Radiator on the to also fits.

http://farm3.static.flickr.com/2745/4429083855_f173399797_o.jpg

Not to worry about the dust it will be cleaned in time.

http://farm5.static.flickr.com/4034/4429084423_d1d33c8b29_o.jpg
http://farm3.static.flickr.com/2748/4429084663_03bb555221_o.jpg

I placed the dvd player on its future location(so you can see the room I have reserved for my dvd player)

http://farm3.static.flickr.com/2791/4429084867_a70655cce7_o.jpg

And a shot to give first impressions on what you might be able to see through the window..

http://farm3.static.flickr.com/2773/4429085093_1570e3ba49_o.jpg

Now stay close.
Yours Cheron

[Cheron]

For viewing pleasure I changed all pictures to the same dimensions.

[Waynio]

Hello there I got an awful lot of cutting done yesterday. but not yet done.

Wile talking to an fellow employee today at work I decided not to laser cut anything. We agreed that the Soul or character of an Object is in the imperfections that the maker of the object left. With this in mind I'll be crafting everything myself from sheet metal or I should say sheet brass.

now on to what I have done.

Since some of you warned me for the hard time I would get cutting my P182. I decided to drill an awful lot of holes with my drill-press to weaken the P182, on the places I would be cutting anyway. This also helped me keep the length I was making noise(next door they have a newly born and I am on a good foot with my neighbors).

8) Thats how I feel about modding too, imperfections keep it human made & completely unique :):up:.
I'm like that about the noise & neighbors too, I should put some sound proofing in the garage so I can mod away at any time, would be able to get so much more done & would be my best mod to date lol :D.

[Juicebox]

Project looks like it will turn out to be an awesome case. I have one question for you; I have a P183, and I will be modding the top panel to accomodate a 180mm exhaust fan. How were you able to remove the top plastic piece to expose the metal underneath?

[Cheron]

@Juicebox
The top plastic piece is fastened by a layer of double sided tape/film. if you slowly insert a screw driver between the metal an plastic it should give way I had removed it in about 15 to 20 min. my advice take it very slow since you cant replace it easy. i have 1 a 2mm thick double sided tape from my work to re fasten it later.
I hope it helps.

[Cheron]

It has been a wile and had a lot of trouble in my life lately but were back on track. Unfotunedly I havent someting to show you. As that will change soon Ill be modding again on V&R.

So that was me telling I am back in Bizz.

[x88x]

Yay, (potential future) updates! :D Sorry to hear about your troubles..good to have you back though. :D

[Cheron]

Just a little teaser.

http://farm5.static.flickr.com/4089/5080603735_237a8e9e4b_b.jpg

I will be finishing this pump over the weekend.

After that ill have to order the brass for the rest of the build.

[Yeticorn]

That pump would look smexy with some brass on it :O

[Cheron]

Yeticorn: That pump would look smexy with some brass on it :O
That is what I was thinking. :)


Having some troubles soldering the brass tube that will cover the actual pump at the back of the Ek Top. The rest of the brass is al ready on. pictures will follow when I solderd the tube.

Yours Cheron

[Cheron]

Finally cracked the sodering mistery. Ill be taking some parts to my work tomorrow so I can finish em. after that it will be a homerun to the finished pump.

[Waynio]

Nice to see your getting back into it Cheron :up:.

[Cheron]

was a bit side tracked....

Have a look. ---> The Worgen Pc (http://www.thebestcasescenario.com/forum/showthread.php?p=309043#post309043)

[Cheron]

As you all can see non of this is dead. I finally finished the bulk of the side window sorry for the bad pictures.
http://farm6.static.flickr.com/5139/5486179452_9edf9909fe_z.jpg
http://farm6.static.flickr.com/5052/5485585151_1410eaa9f2_z.jpg

I wont make any promises any more, except this one: I will post here if there is news about this project.

Yours Cheron

[Waynio]

That is 1 really nice side panel Cheron :):up:.