6th GeN. 30TB TriplX

[grevaeg]

Ey guys!

New project on the starting steps now, hopefully gotten some more experience since last time, and going into this one with all my "might" :P

Current pic

http://grevaeg.com/images/case09/c13.jpg

-Sponsors-
THX ALOT to these guys, they are making this project possible !

OCZ
http://www.pcpower.com/i/logo.jpg
http://www.virtual-hideout.net/reviews/OCZ_PC2-8000_XTC/ocz_logo.jpg

AMD
http://computershopper.com/shoptalk/amd.gif

Anfi-Tech
http://grevaeg.com/images/case010/banneranfi.jpg

Spinnin Wheel
http://www.spinnin-wheel.com/templates/sw/images/top_bar2.JPG

Netshop
http://i17.photobucket.com/albums/b89/bowitz86/NetShop_logo.jpg

EK waterblocks
http://ekwaterblocks.com/shop/images/oscommerce.gif


-Goals-
I would like to develop my previous design, lots of hot air was blown directly onto other components last time, thats gonna change, all the disks will go in the middle module, while the main comps stay in their own on top and bottom, there will be no more "PSU in the top right corner" type of thing, got OCZ on the team this time, and they will provide some awesome custom powersupplies for this project

to sum it up :

* 3 mobo slots (gonna get in a mATX instead of the mITX)
* seperate disk case
* seperate comp case
* watercooled cpu's/gpu's
* TO HELL WITH PLEXI, god i hate that material...
* YES to andonized, cnc'ed alu :P
* fully welded alu frame


-hardware-

PC1 :
MSI 790FX-GD70 AM3
AMD Phenom II 955
8 GB OCZ FlexX DDR3
Radeon 4870x2
910w Silencer PC Power&Cooling


PC2 :
MSI 790FX-GD70 AM3
AMD Phenom II 955
8 GB OCZ FlexX DDR3
Radeon 4870x2
910w Silencer PC Power&Cooling


PC3 :
Asus M3A78-T AM2
AMD Phenom II 955
8 GB OCZ FlexX
Radeon 4870x2
910w Silencer PC Power&Cooling



Harddrives :
6 x : WD500GB, 7200rpm, IDE
16 x : WD500GB, 7200rpm, SATA
8 x : WD750GB, 7200rpm, SATA
4 x : WD1000GB, 7200rpm, SATA
2 x : WD1000GB, 7200rpm, E-SATA
4 x : SG80gb, 15000rpm, SAS
4 x : Seagate 1.5TB, 7200rpm, SATA


Watercooling loop1 - Mainrig, gfx :
OCZ Hydroflow cpu blocks
EK 4870x2 and 4870 gfx blocks
1/2" hosing
Iwaki MD15 pump
4x 360 rad's

A new day, a new set of renders !

http://grevaeg.com/images/case09/c13.jpg

http://grevaeg.com/images/case09/c12.jpg

http://grevaeg.com/images/case09/c14.jpg

http://grevaeg.com/images/case09/c15.jpg

http://grevaeg.com/images/case09/c16.jpg

http://grevaeg.com/images/case09/c17.jpg

http://grevaeg.com/images/case09/c18.jpg

http://grevaeg.com/images/case09/c19.jpg

http://grevaeg.com/images/case09/c20.jpg

http://grevaeg.com/images/case09/c21.jpg
consept art
Gonna post up some early renders on some thoughts and ideas this time around, feel free to contribute with ideas, they are greatly needed, as this is only the basic design without any awesome looking stuff

http://grevaeg.com/images/case09/consept1.jpg

http://grevaeg.com/images/case09/consept10.jpg

http://grevaeg.com/images/case09/consept11.jpg

http://grevaeg.com/images/case09/consept2.jpg

http://grevaeg.com/images/case09/consept3.jpg

http://grevaeg.com/images/case09/consept4.jpg

http://grevaeg.com/images/case09/consept5.jpg

http://grevaeg.com/images/case09/consept6.jpg

http://grevaeg.com/images/case09/consept7.jpg

http://grevaeg.com/images/case09/consept8.jpg

http://grevaeg.com/images/case09/consept9.jpg



Getting late at my place, gonna do a proper writeup tomorrow =)

Stay tuned! ^^

[grevaeg]

A new day, a new set of renders !

Hi again guys, finally done with some more renders, have had some more time on my hand's

http://grevaeg.com/images/case09/c13.jpg

http://grevaeg.com/images/case09/c12.jpg

http://grevaeg.com/images/case09/c14.jpg

http://grevaeg.com/images/case09/c15.jpg

http://grevaeg.com/images/case09/c16.jpg

http://grevaeg.com/images/case09/c17.jpg

http://grevaeg.com/images/case09/c18.jpg

http://grevaeg.com/images/case09/c19.jpg

http://grevaeg.com/images/case09/c20.jpg

http://grevaeg.com/images/case09/c21.jpg

[grevaeg]

Yet another day, and lots of plans and ideas keep emerging :P

(and yea, here we go again ^^ )

The windtunnel

As alot of you know, harddrives produce ALOT of heat when they are stacked up together, and tbh... having around 40 disks in a single box without any way of getting it out efficient will end in disaster and lotsa defective disks.

Building a windtunnel should prevent most of this, a windtunnel is basically a piece of whatever that controlls the way of airflow, in my case it will be buildt with 5mm plexi (god forbid) and will be housing 3x 80mm fans at low RPM, these fans will pull cold air outside the case, and the larger 250mm fans in the back will push hot air out

On to the consepts!

http://grevaeg.com/images/case09/wt1.jpg

http://grevaeg.com/images/case09/wt2.jpg

http://grevaeg.com/images/case09/wt3.jpg

http://grevaeg.com/images/case09/wt4.jpg

http://grevaeg.com/images/case09/wt5.jpg

http://grevaeg.com/images/case09/wt6.jpg

[grevaeg]

Hi guys! New words from OCZ, WE have finally decided how to power up this rig ! and its going to be AWESOME ^^

The newly released PCP&C Silencer 910w, tripple up! will soon be in place, all with custom cut cables to tidy stuff up =)

http://www.pcpower.com/images/products/b/Silencer_910_PPCS910_3875.jpg

Silencer 910
Legendary Silencer performance now in an incredible 910W of continuous clean and stable power. Our Silencer 910 power supply gives you unparalleled PC Power & Cooling performance and reliability along with a unique ultra-quiet cooling design, Quad PCI-Express connectors, classic black finish, and a price that seals the deal.

* 910W Continuous @ 50C (1000W Peak)
* NVIDIA SLI Certified (Multiple GPUs)
* 80+ Silver Certified (88% Efficiency); .99 Active PF
* Up to 90% (10dB) Less Noise per Watt
* +12VDC @ 74A (Powerful Single Rail)
* Rock-Solid, Super-Clean DC Output
* Quad PCI-E and complete array of connectors
* Automatic Fan Speed Control Circuit
* 5-Year Warranty and Tech Support

[grevaeg]

Waterblocks decided upon aswell now, gonna go for OCZ HydroFlow HF-MK1 on all 3 mobo's ^^

*gottalovecopypaste*

http://www.ocztechnology.com/images/products/accessories/b/Hydroflow_TOP_b.jpg
http://www.ocztechnology.com/images/products/accessories/b/hydroflow_hw2_b.jpg

HydroFlow HF-MK1 CPU Waterblock / For AMD, AM2, 775, 1366 / Core i7 Compatible

Designed with the highest possible exchange rate between the block and coolant, the HydroFlow can be easily integrated into any enthusiast water cooled system and help efficiently lower the processor temperature. The HydroFlow is compatible with AMD and Intel processors, including the latest generation Core i7 CPUs.

The triangular fins in the HF-MK1 provide the highest volume to surface ratio of any geometric shape for best dissipation possible, and this special design also creates sufficient turbulence to eliminate the “skin” effect caused by laminar flow. The base block of the HydroFlow increases center contact with the processor core for the greatest possible cooling potential, ensuring maximum exchange and functionality between the waterblock and CPU.

Whether you’re a first-time builder or a seasoned case-modder, OCZ makes the HydroFlow easy to integrate into your rig by supplying both high-flow 3/8” and 1/2” barbs in the packaging without the hassle of searching for compatible hardware.

[grevaeg]

FINALLY, a update :P had my hands full with all kinds of stuff lately, so havent had much time to spare =/

anyways...

http://www.netshop.no/img/cache/l/i/a/lian_li_ll3x35intbay__harddiskholder_934491434_0.j pg
Lian Li HDD holder's

Maybe not the best with the mod spirit in mid,but its undoubtly one of the greater products for anti vibrating disks on the market :P 16x of them have been ordered, should be sporting a total of 48 disk slots !! and with lightweight alu ^^

http://www.netshop.no/img/cache/4/5/7/tnList_645715031_1_1.jpg
Lian Li mobo tray

The same goes with this one, will keep stuff in place, 1 for the top, 1 for the bottom, and 1 for the middle, should be able to fit 2 fullsize atx and 1 m-atx this time around ^^

Oh... wait... 30 meters of square alu is on the way aswell ^^

[grevaeg]

BTW, got a new toy to play with aswell ^^

http://www.stantek.no/eng/page6/files/stansemaskin.jpg
http://www.perrywelding.com/images/sawing/sawing1.jpg

[grevaeg]

A new day has come ^^

And time for a update, hopefully updates will come somewhat faster from now on :P

one of those LARGE boxes arrived today...
http://www.grevaeg.com/images/case010/IMG_5001.jpg

And guess whats inside!
http://www.grevaeg.com/images/case010/IMG_5002.jpg
3x lian li mobo plates! omfg ^^

aaaand....
http://www.grevaeg.com/images/case010/IMG_5003.jpg
http://www.grevaeg.com/images/case010/IMG_5004.jpg
http://www.grevaeg.com/images/case010/IMG_5005.jpg
http://www.grevaeg.com/images/case010/IMG_5006.jpg
http://www.grevaeg.com/images/case010/IMG_5007.jpg
http://www.grevaeg.com/images/case010/IMG_5008.jpg
A bunch of lian li hdd holders, should be possible to house 3 disks in each of these, each with their own rubber ringed screws :P

Have to get these things assembled in sections of 8 and 8, one for the top of the middle case, and one for the bottom

If everything goes after plan, the aluminium for the frame should arrive the upcoming tuesday ^^

[grevaeg]

The aluminium squares have been ordered up for the frame now, ended up on the following:

345x25x25mm - 08x
250x25x25mm - 14x
550x25x25mm - 14x
800x25x25mm - 04x

Gonna be ALOT of cutting and welding taking place soon, alu should arrive on tuesday, 20 meters ordered up ^^ 2mm tick

[grevaeg]

http://www.grevaeg.com/images/case010/weld.jpg
And this would be the welding plans for now =)

[grevaeg]

counted it up just now... 166x60x30cm WITHOUT feet -.-

Bloody hell... didnt think it would end up at those sizes, lol

kinda thinking about building one large ass box instead of 2 mini and 1 medium

[grevaeg]

A new day, new opportunities =)

As mentioned , more then 20 meters(!!!) of 25x25x2mm aluminium have been cut up today in appropriate lenghts..

The welding will start the upcoming thursday most likely, some results will finally show by then, OCZ have sendt 3x of their hyrdoflow aswell today, so should receive them sometime soon :P

http://grevaeg.com/images/case010/DSC00299.jpg
http://grevaeg.com/images/case010/DSC00294.jpg
http://grevaeg.com/images/case010/DSC00296.jpg
http://grevaeg.com/images/case010/DSC00298.jpg
http://grevaeg.com/images/case010/DSC00300.jpg
http://grevaeg.com/images/case010/DSC00301.jpg
http://grevaeg.com/images/case010/DSC00302.jpg
http://grevaeg.com/images/case010/DSC00303.jpg

Placed up the stuff i allready received just to see if everything fit as it should, and it really seem promissing this far, however... the middle mobo tray is rotated the wrong way :P have to cut and fit it to the mATX standard first :P

http://grevaeg.com/images/case010/DSC00305.jpg
http://grevaeg.com/images/case010/DSC00306.jpg
http://grevaeg.com/images/case010/DSC00307.jpg
http://grevaeg.com/images/case010/DSC00308.jpg
http://grevaeg.com/images/case010/DSC00309.jpg
http://grevaeg.com/images/case010/DSC00312.jpg

Next week this little fella will be visited =)
http://grevaeg.com/images/case010/DSC00297.jpg

And for those of you that wanna see how a CNC Hecksaw works, click here (http://grevaeg.com/images/case010/MOV00293.MP4)

And a small view of the plating thats been ordered ^^
http://grevaeg.com/images/case010/DSC00295.jpg

[grevaeg]

Time to pick stuff appart! YAaAaaY!

For some reason is having a front mounted screen really cool and hip these days... so how could this project be anything less =)

Front mounted screens are supposedly used for computer monitoring or something...

In the lack of something better to do i decided to get the planned screen out of its precious little hideout...

Todays victim :

1x HP Compaq EVO 620
http://grevaeg.com/images/case010/DSCF7563.jpg

With the outrageous :

1.5ghz dual core pentium M
1gb memory
80gb hdd
15.5" LCD screen

it even comes with a xp home licence :P

And yes... i know it will count up as a 4th computer... but hey... need something to run the screen aswell 0.o

Ran out of time, ill do a write up later =) enjoy the pics for now
http://grevaeg.com/images/case010/DSCF7563.jpg
http://grevaeg.com/images/case010/DSCF7564.jpg
http://grevaeg.com/images/case010/DSCF7565.jpg
http://grevaeg.com/images/case010/DSCF7566.jpg
http://grevaeg.com/images/case010/DSCF7567.jpg
http://grevaeg.com/images/case010/DSCF7568.jpg
http://grevaeg.com/images/case010/DSCF7569.jpg
http://grevaeg.com/images/case010/DSCF7570.jpg
http://grevaeg.com/images/case010/DSCF7571.jpg
http://grevaeg.com/images/case010/DSCF7572.jpg
http://grevaeg.com/images/case010/DSCF7573.jpg
http://grevaeg.com/images/case010/DSCF7574.jpg
http://grevaeg.com/images/case010/DSCF7575.jpg
http://grevaeg.com/images/case010/DSCF7576.jpg
http://grevaeg.com/images/case010/DSCF7577.jpg
http://grevaeg.com/images/case010/DSCF7578.jpg
http://grevaeg.com/images/case010/DSCF7579.jpg

[grevaeg]

Hi again guys !

Had some more time at my hands so have been able to work a bit more on the screen and towards making some screen mounts to align the screen flat on the laptop, u wouldnt believe how small the screws used for stuff like this is .... talking about a half mm tick or something.... such a pain in the ass to get ahold off in the local stores

http://grevaeg.com/images/case010/DSCF7580.jpg


http://grevaeg.com/images/case010/DSCF7581.jpg
Found a decent 1mm alu plate down in the working area... cut off a suitable piece and drilled some holes to get the screen attached..

http://grevaeg.com/images/case010/DSCF7582.jpg
Crazy small...

http://grevaeg.com/images/case010/DSCF7583.jpg

http://grevaeg.com/images/case010/DSCF7584.jpg
Screen mounted up in its vertical position =) hopefully this should look good


http://grevaeg.com/images/case010/DSCF7585.jpg

http://grevaeg.com/images/case010/DSCF7586.jpg

http://grevaeg.com/images/case010/DSCF7587.jpg
Aaand the other side =)


http://grevaeg.com/images/case010/DSCF7589.jpg

http://grevaeg.com/images/case010/DSCF7590.jpg

http://grevaeg.com/images/case010/DSCF7591.jpg

http://grevaeg.com/images/case010/DSCF7592.jpg

There we go.... screen mounted up on the laptop, just flipped over the opposite was as normal, still have to solder some wires for the on/off button and the thumbstick =)


http://grevaeg.com/images/case010/DSCF7592.jpg

Another thing that came to my attention today was the lian li brackets placed beneath the disk holders... that allow the holder to be removed from its baseplate... in my little world cant i really see the use of stuff like this beside taking alot of space... a decent 2 cm buildup on each of em...


http://grevaeg.com/images/case010/DSCF7593.jpg

http://grevaeg.com/images/case010/DSCF7594.jpg

http://grevaeg.com/images/case010/DSCF7595.jpg

U can see the height difference quite well... they have to go...


http://grevaeg.com/images/case010/DSCF7596.jpg

http://grevaeg.com/images/case010/DSCF7597.jpg

http://grevaeg.com/images/case010/DSCF7598.jpg


8 done... gotta love hecksaws... *truly hate em* -.-

should be able to start putting the rack together tomorrowish =) so a large update will come by then

x88x : a touch panel would be sweet :P throw me a pm if u see someone selling it, untill then ill just have to move the thumbpad outside the case or use BT =)

-Cg

[grevaeg]

Thx alot for the support guys =) Ill do my best, hehe

Got a delivery from OCZ today !

After a couple of days in transit the Hydroflow's arrived at the shop =) The finish look's awesome this far... and its delivered with both 3/8" and 1/2" nozzles ^^

Cant wait to get em mounted up, just have to decide on wich motherboards to go for 0.o

http://grevaeg.com/images/case010/DSCF7604.jpg

http://grevaeg.com/images/case010/DSCF7605.jpg

http://grevaeg.com/images/case010/DSCF7606.jpg

http://grevaeg.com/images/case010/DSCF7608.jpg

http://grevaeg.com/images/case010/DSCF7609.jpg

http://grevaeg.com/images/case010/DSCF7611.jpg

[grevaeg]

Have done quite a bit of work today, the entire frame is now ready to go, gotta love Forsa knots ^^

http://grevaeg.com/images/case010/19609/IMG_5037.jpg

http://grevaeg.com/images/case010/19609/IMG_5038.jpg

http://grevaeg.com/images/case010/19609/IMG_5039.jpg

http://grevaeg.com/images/case010/19609/IMG_5040.jpg

http://grevaeg.com/images/case010/19609/IMG_5041.jpg

http://grevaeg.com/images/case010/19609/IMG_5042.jpg

http://grevaeg.com/images/case010/19609/IMG_5043.jpg

http://grevaeg.com/images/case010/19609/IMG_5044.jpg

http://grevaeg.com/images/case010/19609/IMG_5045.jpg

http://grevaeg.com/images/case010/19609/IMG_5046.jpg

http://grevaeg.com/images/case010/19609/IMG_5047.jpg

http://grevaeg.com/images/case010/19609/IMG_5048.jpg

http://grevaeg.com/images/case010/19609/IMG_5049.jpg

http://grevaeg.com/images/case010/19609/IMG_5050.jpg

http://grevaeg.com/images/case010/19609/IMG_5051.jpg

http://grevaeg.com/images/case010/19609/IMG_5052.jpg

[grevaeg]

Building my case in a MC shop my friend, so those objects are somewhat common around there =)

Offtopic :

A few pics of the shop ^^
http://www.spinnin-wheel.com/images/zoom/KZVJCY/viewsize/dsc00059.jpg
http://www.spinnin-wheel.com/images/zoom/KZVJCY/viewsize/dsc00055.jpg
http://www.spinnin-wheel.com/images/zoom/KZVJCY/viewsize/dsc00057.jpg
http://www.spinnin-wheel.com/images/zoom/ZCGZXH/viewsize/dsc00010.jpg
http://www.spinnin-wheel.com/images/zoom/ZCGZXH/viewsize/dsc00036.jpg

[grevaeg]

Just got a mail from my iron monger, some of the aluminium will arrive tomorrow afternoon, expect a update soon folks =) should also get 4x 360 radiators along with the alu...

Have to figure out how many loops that will be needed when considering the practical aspect

Current plans for watercooling would be :

2x 4870x2
1x 4870 - 1GB
8x DDR3 OCZ FlexX
4x DDR2 OCZ FlexX
3x CPU's
3x chipset's, not sure about this one yet though, but stuff tends to get hot without any fan's mounted to the CPU =)

unknown amount of and reservoirs , pumps will be needed aswell

[grevaeg]

Guys !

Anyone know if its possible to get a chipset block on the MSI 790FX-GD70? In that case, wich? =)

http://img5.imageshack.us/img5/7222/mgd7003qf6.jpg

[grevaeg]

http://icrontic.com/uploads/2009/01/phenom2_dragon.jpg
http://computershopper.com/shoptalk/amd.gif

This is a great day indeed !

AMD has decided to join up on this project aswell... in other words, everything will be going full fledged AMD - AM3/Phenom 2/AM2. Alot has changed with the phenom 2 from previous generations, so going to give AMD my full support in this build =)


Hardware changes :

CPU 1 : from Intel Q9550 -> Phenom II 955
CPU 2 : from intel Q9550 -> Phenom II 955
CPU 3 : from Intel Atom 330 -> Phenom II 955

Mobo 1 : Asus P5Q premium (775) -> MSI 790FX-GD70 AM3
Mobo 2 : Asus P5Q premium (775) -> MSI 790FX-GD70 AM3
Mobo 3 : Intel D945GCLF2D mITX -> Asus M3A78-T AM2

http://www.cpusolutions.com/mm8004744CPU/Images/PHENOM955.jpg

[grevaeg]

Thats kinda the issue in the first place :P

There will be close to NO airflow in the top and bottom case as all of the items in there will be watercooled 0.o

Could allways put up a active fan on the SB/Mos though

[grevaeg]

Hi guys!

Been a stressfull day with lotsa stuff to do, but managed to get some more work done on the case today =)

got the hdd holders in place atleast, its still somewhat crude though, need some polishing and filing ^^

Ah well... ill write down some more stuff soon, gonna post a ****load of pics now ^^

http://grevaeg.com/images/case010/tg240609/
Made a quick image gallery for those of you who want some larger pics ;O

Here we go ... Visited my iron monger earlier this week and picked up some 5mm alu for the harddrive frame, should be sturdy enough.. however, have to cut it down as much as possible due to the massive weight..
http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00316.jpg

Tape has allways been a decent tool for creativity :P
http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00317.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/bilde%20009.jpg

So out with the jiggzaw and start cutting... think i wasted 1 blade for each plate i cut...

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00318.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00319.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00320.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00328.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/bilde%20001.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/bilde%20012.jpg

Rubber mountings have been used to prevent the harddrive holders from getting any vibrations out troughout the case
http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00321.jpg

Holes was then cut out both to allow heat to travel around and partly to reduce weight... a 80mm hole of 5mm alu is easily 100g, close to a half kilo's off with just those holes, and hey... it looks somewhat cool :P
http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00323.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00324.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00325.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00330.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00331.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00332.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00333.jpg

http://grevaeg.com/images/case010/tg240609/resources/images/medium/DSC00334.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/Picture%20001.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/Picture%20002.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/Picture%20003.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/Picture%20004.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/Picture%20005.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/bilde%20010.jpg

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/bilde%20011.jpg



Please check out the image gallery linked above for now guys, ill write up some more soon :P (http://grevaeg.com/images/case010/tg240609)

oh oh, and heres a small update on whats coming next :P

http://www.grevaeg.com/images/case010/tg240609/resources/images/medium/Picture%20006.jpg

[grevaeg]

3x 910w PCP&C Silencer, a motherboard tray, a 17" screen up front of em, and fanducts in front + 4x 250mm fans for airflow =)

[grevaeg]

Small update today my friends..

Picked up a package the other day, wonder whats inside... lol

http://grevaeg.com/images/case010/280709/images/IMG_5059.jpg

http://grevaeg.com/images/case010/280709/images/IMG_5060.jpg

http://grevaeg.com/images/case010/280709/images/IMG_5061.jpg

http://grevaeg.com/images/case010/280709/images/IMG_5062.jpg

Gotta love those small classy boxes ^^
http://grevaeg.com/images/case010/280709/images/IMG_5063.jpg


Ahold! The allmighty Phenom II 955 x4 :P Should receive the MSI boards the upcoming wednesday, so will be able to mount some stuff up by then hopefully...
http://grevaeg.com/images/case010/280709/images/IMG_5064.jpg

http://grevaeg.com/images/case010/280709/images/IMG_5065.jpg

http://grevaeg.com/images/case010/280709/images/IMG_5066.jpg

[grevaeg]

Hi guys!

Time for a update again =)

Been quite busy with solidworks today, finalizing the more boring parts of this case for the laser to prosess. So should have the first batch of basic pieces tomorrow hopefully

http://grevaeg.com/images/case010/290609/frontbackmid.jpg

http://grevaeg.com/images/case010/290609/hddh.jpg

http://grevaeg.com/images/case010/290609/mobo.jpg

http://grevaeg.com/images/case010/290609/moboback.jpg

http://grevaeg.com/images/case010/290609/toprad.jpg


Been curious about what type of PSU's that will be powering up this cute thing? Guess ill throw out some workorders =) a HUGE thanks to OCZ for making this possible aswell..... wouldnt be possible without em

Behold.... the allmighty PC Power & Cooling Silencer 910w

http://www.pureoverclock.com/images/news/pcpc_silencer910.jpg

PSU 1 : 24x sata, 4x molex, 4x PCIx - Technical drawing (http://grevaeg.com/images/case010/290609/S91E-EU3.pdf)
PSU 2 : 18x sata, 7x molex, 4x PCIx - Technical drawing (http://grevaeg.com/images/case010/290609/S91E-EU1B.pdf)
PSU 3 : 18x sata, 7x molex, 4x PCIx - Technical drawing (http://grevaeg.com/images/case010/290609/S91E-EU2B.pdf)

Expect a large update tomorrow guys =)

8x 250mm fans should be arriving along with 3 water res', 2 MSI mobo's, and some arctic silver, and the alu is hopefully delivered tomorrow aswell 0.o

[grevaeg]

Hey guys! have had some time on my case again now, so heres a update ! ^^

The HDD rack

As most of you probably have noticed have the HDD rack been somewhat doubtfull when it comes to a 25KG load of harddrives, so decided to cut up some more 5 mm alu for em, and mount em together, still had to keep the space in between though, since a mobo and the PSU's are coming in at some point

Have also been drilling some holes to get the new bolts in to hold stuff together, ill be able to mill out some proper support's between the rack tomorrow, just didnt have enough time to finish today =)


http://grevaeg.com/images/case010/30709up/images/IMG_5084.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5085.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5086.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5083.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5087.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5088.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5089.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5090.jpg


Laz0rz!

OMFG, have seen a large ass CNC laser cutter in action today... quite a show... it managed to cut up a 2x2500x1250mm alu plate in under 12 minutes... now thats impressive..

However... have lost my bloody car keys somewhere. such a pain... had to take the 2nd best and get some tape to get the job done... gogo MC with alu tail or something..
http://grevaeg.com/images/case010/30709up/images/IMG_5091.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5092.jpg

Perfect fit? yes... would say so ^^
http://grevaeg.com/images/case010/30709up/images/IMG_5093.jpg

Front and back for middle module
http://grevaeg.com/images/case010/30709up/images/IMG_5094.jpg

And the 17" LCD thats getting mounted up front :P (failed to mention that earlier, lol)
http://grevaeg.com/images/case010/30709up/images/IMG_5098.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5099.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5100.jpg


First looks on the top module ^^

And some de-assembled mobo plate....
http://grevaeg.com/images/case010/280709/images/IMG_5067.jpg

http://grevaeg.com/images/case010/280709/images/IMG_5068.jpg

... Placed down on the new backplate for the top module =)
http://grevaeg.com/images/case010/30709up/images/IMG_5095.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5096.jpg

http://grevaeg.com/images/case010/30709up/images/IMG_5097.jpg

[grevaeg]

http://grevaeg.com/images/case010/banneranfi.jpg

A new sponsor has joined up, Anfi-Tec will be providing full cover blocks for the MSI 790FX-GD70 boards

http://shop.anfi-tec.de/images/product_images/popup_images/99_0.JPG

http://shop.anfi-tec.de/images/product_images/popup_images/99_1.JPG

http://shop.anfi-tec.de/images/product_images/popup_images/99_2.JPG

http://shop.anfi-tec.de/images/product_images/popup_images/99_3.JPG

And yea... alot has been done yesterday... and even more today, update coming later today, stay tuned! ^^

[grevaeg]

Hi guys,

Gonna post up some pics of some work done yesterday, have completed the screen mount now, thats going for the midsection of the case

Worked it out from a 2mm alu plate
http://grevaeg.com/images/case010/030709up/Ny%20mappe/images/IMG_5150.jpg

http://grevaeg.com/images/case010/030709up/Ny%20mappe/images/IMG_5151.jpg

http://grevaeg.com/images/case010/030709up/Ny%20mappe/images/IMG_5152.jpg

http://grevaeg.com/images/case010/030709up/Ny%20mappe/images/IMG_5154.jpg

http://grevaeg.com/images/case010/030709up/Ny%20mappe/images/IMG_5155.jpg

http://grevaeg.com/images/case010/030709up/Ny%20mappe/images/IMG_5156.jpg

http://grevaeg.com/images/case010/030709up/Ny%20mappe/images/IMG_5153.jpg

[grevaeg]

Norway is probably THE warmest country in the world right now... especially when ur working inside a large ass building with stainless steel plating -.-

Anyways.... beside the freaking hot weather these days, what have Mr.Grevaeg been working on? ^^

His project ofcourse!

Some general progress pics

http://grevaeg.com/images/case010/060709up/images/IMG_5263.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5264.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5265.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5266.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5270.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5272.jpg
yes, its shrinked :P ill get back to this one

http://grevaeg.com/images/case010/060709up/images/IMG_5273.jpg

The first set of 360 twin radiators

After quite alot of thoughts and ideas on how to fit 4x 360 rads and 2x 240, ive finally found a solution for the first and second pair ^^

Theres alot of space on the bottom of each module, might aswell use it for something :P
sooo.... placed em up, and got the 1/2" fittings in (why would people ever bother using anything less btw?!)

http://grevaeg.com/images/case010/060709up/images/IMG_5256.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5257.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5258.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5259.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5271.jpg

The water ress . x3

Swiftech got some really cute water ress'es, they seem somewhat small, but really, why would u need 10 gallons in a ress? also comes with a fillport in the top, and possibilities to mount up nozzles at top, side and bottom, cant get much better then that imo

http://grevaeg.com/images/case010/060709up/images/IMG_5260.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5261.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5262.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5267.jpg

PCP&C Silencer 910w !

Well my friends, they have arrived... and god.. ive never seen that many cables loose outside a case in my life... ill prolly have weeks infront of me to manage these. But then again, OCZ provided a perfect cut after measure's by me, so they deserve a huge applause for the work and dedication they put in their PSU's, still cant wait to get em up running, managed to plug one of em in and start em up, have heard alot of rumors that they are quite noisy, but i have to disagree there, no way in hell they are producing more then 26DB'ish

lets get some pics out, shall we ? ^^

http://grevaeg.com/images/case010/060709up/images/IMG_5238.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5239.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5240.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5241.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5242.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5243.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5244.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5245.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5246.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5268.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5269.jpg

http://grevaeg.com/images/case010/060709up/images/IMG_5274.jpg

Guess thats all for now guys, ill work on getting some spacers on the bottom module tommorrow, and hopefully get ready to ship it for wet sanding within a few days, stay tuned ^^

-Cg

[grevaeg]

Hi guys, small update today, ill just let the images speak :P

http://grevaeg.com/images/case010/070709up/images/IMG_5275.jpg

http://grevaeg.com/images/case010/070709up/images/IMG_5276.jpg

http://grevaeg.com/images/case010/070709up/images/IMG_5277.jpg

http://grevaeg.com/images/case010/070709up/images/IMG_5278.jpg

http://grevaeg.com/images/case010/070709up/images/IMG_5279.jpg

http://grevaeg.com/images/case010/070709up/images/IMG_5280.jpg

http://grevaeg.com/images/case010/070709up/images/IMG_5281.jpg

http://grevaeg.com/images/case010/070709up/images/IMG_5282.jpg

http://grevaeg.com/images/case010/070709up/images/IMG_5283.jpg

[grevaeg]

Hi guys! update today :P

Lets start up with a few words of frustration... since the cables comes unsleeved... i guess someone would have to pick it up and do some work on it... and guess what! that person would be me -.-

I just tell myself..One day... ill get these bloody cables managed...

a few of em got wrapped up today though, and more to come!

Plug's, Pin's and awesome homemade tools!

As most of you noticed doesnt the HDD cables come sleeved.... only one thing to do in this matter! just pick it all appart, and wish for good luck on the re-assembly ^^

u all remember were the start was....

http://grevaeg.com/images/case010/080709up/images/IMG_5298.jpg

http://grevaeg.com/images/case010/080709up/images/IMG_5296.jpg

http://grevaeg.com/images/case010/080709up/images/IMG_5284.jpg
Some trial and error had to be done before getting a decent result :P

http://grevaeg.com/images/case010/080709up/images/IMG_5286.jpg
Didnt find anything suitable to push the cables into the sata power plugs, so had to improvice somewhat... turned out great, pushing cables like crazy ^^

http://grevaeg.com/images/case010/080709up/images/IMG_5288.jpg

http://grevaeg.com/images/case010/080709up/images/IMG_5289.jpg

http://grevaeg.com/images/case010/080709up/images/IMG_5290.jpg

http://grevaeg.com/images/case010/080709up/images/IMG_5291.jpg


Now u see it, now u dont!

Been working on some ideas on how to hide the rest of the cable mess aswell, and believe ive found a good solution ^^

This would be the bottom of a 2 set piece of cable hiders for the majority of the PSU cables, will also house 4 pin molex for misc power in here, and stuff for cathodes and waterpumps :P

http://grevaeg.com/images/case010/080709up/images/IMG_5293.jpg

http://grevaeg.com/images/case010/080709up/images/IMG_5295.jpg

http://grevaeg.com/images/case010/080709up/images/IMG_5294.jpg

Thats all for today folks, update again tomorrow :P

[grevaeg]

Pump choices up next... any ideas guys? ^^

some requirements :

* able to lift 180cm up
* freferably external power supply (dont wanna be dependant on having the computer running)
* preferably cheaper then 150$ each
* need to be able to fit 3x in the widht of 30cm
* atleast 600l/h to get some troughput

[grevaeg]

Hi guys!

New update today ! running really low on materials now, all from alu to steel, and the plexi have yet to arrive.... so somewhat in a standstill now, ah well.... found a few parts to work on anyways ^^

Whats been done:

* PSU mounts done
* Middle mobo plate mounted
* Front and backplate of mid module finally popped in place
* Started working on consealing the middle PC aswell as all the cables that comes with em
* 2x 240 and 2x 360 radiators arrived
* ordered up 12x 120mm fractal design 16db fans
* ordered up 3x laing pumps
* ordered up hosing and "coolsleeves"


The mobo plate

Well... as you prolly know by now, the PC thats gonna manage most of the disks will be placed in the middle module, up front on the middle module to be exact ^^

Had to file down the back of the spacers to make sure the mobo plate was in touch with the front plate

Drilled a bunch of holes, and popped stuff into place^..

http://grevaeg.com/images/case010/110709up/images/IMG_5299.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5300.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5301.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5302.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5303.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5304.jpg


The PSU mount

cmon, its basically just 2 plates of alu with holes in em, not gonna go further into that venture ^^

http://grevaeg.com/images/case010/110709up/images/IMG_5305.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5307.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5308.jpg



The secret!
Wonder whats gonna hide behind the lower disk rack... :P oh, and tape measure ftw ^^

http://grevaeg.com/images/case010/110709up/images/IMG_5309.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5310.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5311.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5312.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5313.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5314.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5315.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5316.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5317.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5318.jpg

http://grevaeg.com/images/case010/110709up/images/IMG_5319.jpg

Might be able to get some work done tomorrow aswell, time will tell ^^

-Cg

[grevaeg]

Small update guys :P no pics today though ^^

whats been done :

* cut the top module in half (its now the same size as bottom module)
* mounted 4x 360 radiators in top module
* top plate mounted up

Tomorrows shipment

* 2x 240 radiators
* 12x fractal design 120mm 16db fans
* 10x meters of 1/2" tubing
* 110x 120mm golden fan grills... no idea why they sendt me those -.-

Images coming up tomorrow =)

[grevaeg]

Yet another day has gone by.... and finally... rounding 75% done on the HDD cables and sleeving, 6 of the 8 - 6 plug cables are done, oh oh, added some pics of the true top radiator aswell,

Sad enough, didnt receive the 120mm fan's today... or the radiators -.- will pick em up tomorrow though

whats been done
*Cable sleeeeeeeves -.-
*Cable sleeeeeeeves -.-
*Cable soldering -.-
*Cable sleeeeeeeves -.-
*Cable soldering -.-

The frustration is apparent :P

Anyways... heres some pics :

The silencers came with lotsa s-ata power connectors... however... all of em were facing the same way... thats not gonna work with middle placed PSU's with disks above and below, had to cut and rotate half of em

http://grevaeg.com/images/case010/130709up/images/IMG_5324.jpg

http://grevaeg.com/images/case010/130709up/images/IMG_5325.jpg

http://grevaeg.com/images/case010/130709up/images/IMG_5326.jpg

http://grevaeg.com/images/case010/130709up/images/IMG_5327.jpg

http://grevaeg.com/images/case010/130709up/images/IMG_5331.jpg


The top box, more rads!

The top box has officially lost 50% of its total height, just like its brother ^^ the top space is not needed at all, and trust me... the case is still bloody HUGE, anyways, another set with 360 rads mounted up, totalling at 4x360 radiators in top, another 2x 240 coming in for the bottom module tomorrow along with the fractal design fans

http://grevaeg.com/images/case010/130709up/images/IMG_5328.jpg

http://grevaeg.com/images/case010/130709up/images/IMG_5329.jpg

http://grevaeg.com/images/case010/130709up/images/IMG_5330.jpg

[grevaeg]

Guys! Guess what?!

The truly worst, most fragile and hated material to work with have arrived, in a small pile, at my office... after a 3 hour drive to pick it up at the "local" retailer (Norway is one of those countries with bad availability of certain stuff, plexi being one of em :P)

Guess i should dedicate a entire article to how much i hate plexiglass, but that will have to go for some other time... and trust me... the list is painfully long when it comes to why i dont like working with it... but hey... it looks good, doesnt it? ^^

So..

Whats been done

* been cutting plexi like crazy on a bladesaw
* measured and drilled holes trough it
* made proper fittings for m6 bolts so it can be mounted to the case
* cut 6x 120mm holes on the top case for radiator ventilation
* been drawing sketches to the cable hiding "system" (also called angled alu plates :P)

Plexi -.-

Well.. the plan was to go for eloxated brushed alu in the first place... but im one of those impatient guys that cant really wait 2 weeks for stuff to be sendt away... worked with... returned and then to be finding that more stuff have to go trough the same process again.

So went off to the local retailer and picked up around 5 square meters of different tickness plexi,

The entire front part of the case is now made out of 5mm clear plexi with 3mm black reflective plexi outside (think PS3 finnish), should be able to put some diodes or cathodes behind it so ill have a nice blue glowing edge around all of it ^^

Also picked up a 8mm tick clear plate to cover the front screen.

All of it tightened up with m6 bolts

And NO, i cant remove the protective plastic before everything is done, its there for a reason :P

http://grevaeg.com/images/case010/140709up/images/IMG_5373.jpg
Plates all cut up

http://grevaeg.com/images/case010/140709up/images/IMG_5372.jpg
Showing off the front middle section on the floor ^^

http://grevaeg.com/images/case010/140709up/images/IMG_5397.jpg
Measure up

http://grevaeg.com/images/case010/140709up/images/IMG_5398.jpg
And start drilling ^^

http://grevaeg.com/images/case010/140709up/images/IMG_5374.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5393.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5394.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5395.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5396.jpg
The 5mm + 3mm make up the 8mm clear plexi on the front display perfectly =)


Ventilation, top radiator's

Not much air is gonna go trough a 3mm plexi plate, so had to get some holes up and ready for some seriour ventilation :P Oh... and the spacers will be coming back, just had to take em out so i could mount the plates proper :P

http://grevaeg.com/images/case010/140709up/images/IMG_5399.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5400.jpg
The backside of the rads

http://grevaeg.com/images/case010/140709up/images/IMG_5401.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5402.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5403.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5404.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5405.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5406.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5407.jpg

http://grevaeg.com/images/case010/140709up/images/IMG_5408.jpg

Would hate to try and read trough this thread with a 56k... lol

Hopefully able to push trough a update tomorrow aswell ^^

-Cg

[grevaeg]

One of those sleepnight nights have just struck me yet again... my ladie is off in spain for another 3 days... so nothing much to do home at the moment...

Ah well... guess we just have to fill up the time with other stuff to do ^^ and whats better then some late nigh modding 0.o (no, thats not a serious statement) :P

on the 4th day of my cable management road now, and honest, stuff is cloing in to being nearly invisible as far as cables go atleast, in the middle section though :P the rest havent even been started 0.o

The super PSU cooler thingy!

The PCP&C PSU's have been rumored to excrete quite alot of annoying sound when being warmed up, so would assume that a couple of fan's would help keeping the audible stuff a bit down...

So decided to make a fan duct around all the 3 PSU's to be sure they receive enough air in that somewhat tightened up enviroment ^^

http://grevaeg.com/images/case010/160709UP/images/IMG_5422.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5423.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5424.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5425.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5426.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5427.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5428.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5429.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5430.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5432.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5433.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5434.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5435.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5436.jpg

http://grevaeg.com/images/case010/160709UP/images/IMG_5439.jpg

And yes... the small gap between the cable holder and the PSU duct is just a matter of not fastening stuff to the frame yet ^^

Thats all for this night guys, stay tuned tomorrow =)

[grevaeg]

wtf? it's spelled porn? 0.o

After a few days out being really (REALLY) drunk with some friends, i guess its time to get back to work :P however... its quite hard when u cant even lean forward without loosing balance...bloody vodka... lol

The paintjob i due this week, ended up with 2 layers of powder coat this time around aswell.....and alot have to be sanded before starting up with that...

Whats been done

* Mounted fan's
* Made radiator holder
* Finished mobo plate holders
* Sanded up some parts for painting
* Received 40x 100cm angled S-ATA cables
* Worked a bit more on the PSU shroud

With a bit of luck should i receive my shipment from watercooling.co.uk by tuesday, that contains the pumps and the coils for the hoses ^^


http://grevaeg.com/images/case010/180709up/images/IMG_5440.jpg
What to say... ^^

http://grevaeg.com/images/case010/180709up/images/IMG_5442.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5444.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5443.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5445.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5453.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5446.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5447.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5448.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5449.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5450.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5451.jpg

http://grevaeg.com/images/case010/180709up/images/IMG_5452.jpg

Afraid my current state of mind aint able to do a proper writeup to the pics :P let the imagination work guys!

-Cg

[grevaeg]

Hah, thx DonT-FeaR ^^ Hopefully have alot to show you guys, dont rly consider this project half way done yet 0.o

anyways... :

Hi guys!

The package from watercooling.co.uk has finally arrived! And im such a lazy boy, n wont be writing stuff on how to assemble laing pumps :P

Consider this a small update ^^

http://grevaeg.com/images/case010/200709up/images/IMG_5470.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5471.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5472.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5473.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5474.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5475.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5476.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5477.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5478.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5479.jpg

Pump mount... still workin on it :P

http://grevaeg.com/images/case010/200709up/images/IMG_5480.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5481.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5482.jpg

http://grevaeg.com/images/case010/200709up/images/IMG_5483.jpg

[grevaeg]

Hi guys ^^

Case has been de-assembled today, time to get some work done to get this project a decent looking finnish i would guess?

current status pic

http://grevaeg.com/images/case010/220709/DSC00006s.JPG (http://grevaeg.com/images/case010/220709/DSC00006.JPG)

Ill get some more pics by friday, stay tuned! one of those truly MAJOR updates should arise around those times =)

[grevaeg]

Hi guys! Thx for all the good words, im a bound man soon now, cant rly say im complaining either..

Guess it would be time for a new update ^^

Have been sanding like crazy the past days, and are finally ready for the first layer of primer, to make sure the paint will be stuck there for awhile :P

The colour of choice ended up on black-ish non reflective (matte?) for the lack of a better word ^^

http://grevaeg.com/images/case010/250709/DSC00013s.jpg (http://grevaeg.com/images/case010/250709/DSC00013.jpg)

http://grevaeg.com/images/case010/250709/DSC00015s.jpg (http://grevaeg.com/images/case010/250709/DSC00015.jpg)

http://grevaeg.com/images/case010/250709/DSC00016s.jpg (http://grevaeg.com/images/case010/250709/DSC00016.jpg)

http://grevaeg.com/images/case010/250709/DSC00017s.jpg (http://grevaeg.com/images/case010/250709/DSC00017.jpg)

http://grevaeg.com/images/case010/250709/DSC00019s.jpg (http://grevaeg.com/images/case010/250709/DSC00019.jpg)

http://grevaeg.com/images/case010/250709/DSC00020s.jpg (http://grevaeg.com/images/case010/250709/DSC00020.jpg)

[grevaeg]

Guess its time for a update again...

Whats been done

* Paintjob done
* Mounted case back up
* Mounted frontplates
* Mounted Laing pumps
* Tightened fittings for hoses
* Mounted wtfpwn wheels on the lower module

The paint job

A entire chapter should be dedicated to this one, cus honest, its been a ****load of work to get the finnish decent enough to be happy with it :P Been sanding for hours, placed up primer, and hung stuff up and sprayed it with a spray gun... After a 30 hours drytime it was finally ok to pick it back down and start getting this case up running again....

http://grevaeg.com/images/case010/270709up/DSC00022.JPG

http://grevaeg.com/images/case010/270709up/DSC00024.JPG

http://grevaeg.com/images/case010/270709up/DSC00023.JPG

http://grevaeg.com/images/case010/270709up/DSC00025.JPG

http://grevaeg.com/images/case010/270709up/DSC00028.JPG

http://grevaeg.com/images/case010/270709up/IMG_5604.jpg

http://grevaeg.com/images/case010/270709up/IMG_5605.jpg

http://grevaeg.com/images/case010/270709up/IMG_5606.jpg

http://grevaeg.com/images/case010/270709up/IMG_5607.jpg

http://grevaeg.com/images/case010/270709up/IMG_5608.jpg

http://grevaeg.com/images/case010/270709up/IMG_5609.jpg

http://grevaeg.com/images/case010/270709up/IMG_5611.jpg

http://grevaeg.com/images/case010/270709up/IMG_5612.jpg

http://grevaeg.com/images/case010/270709up/IMG_5613.jpg

http://grevaeg.com/images/case010/270709up/IMG_5614.jpg

http://grevaeg.com/images/case010/270709up/IMG_5616.jpg

[grevaeg]

Hi guys!

Its light in the end of the tunnel! Finally! Mounted up alot of stuff now, and its clearly turning out to be possible to get this PC up and running quite soon =)

http://grevaeg.com/images/case010/280709up/images/IMG_5604.jpg


The Storageish

Got pretty exactly 36 sata and 4 ide drives thats all going into this build, leaving another 8 slots for new disks in the future ^^ stuff tends to be filled up at a alarming rate... with, uhm... family photo's ofc ^^

http://grevaeg.com/images/case010/280709up/images/IMG_5623.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5624.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5625.jpg
First row in place ^^

http://grevaeg.com/images/case010/280709up/images/IMG_5630.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5631.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5632.jpg
Anyone stated that stuff cant be clean with 40 drives? 0.o

http://grevaeg.com/images/case010/280709up/images/IMG_5633.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5634.jpg
Aaaand.... the first batch of 24 disks up

http://grevaeg.com/images/case010/280709up/images/IMG_5635.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5637.jpg
Power em up?

http://grevaeg.com/images/case010/280709up/images/IMG_5638.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5639.jpg


Watercooling

Hah! Stuff looks so messy right now,but hey... its only gonna move water around... might change some loops tomorrow
http://grevaeg.com/images/case010/280709up/images/IMG_5626.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5627.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5628.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5629.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5636.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5640.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5641.jpg

Current status pic
http://grevaeg.com/images/case010/280709up/images/IMG_5642.jpg

http://grevaeg.com/images/case010/280709up/images/IMG_5643.jpg

[grevaeg]

Hi guys!

Time for the long awaited update =)

Whats been done
* More cable management
* Some hose management
* Made a new holder to keep sata cables out of sight on the bottom module
* Soldered power cables for the pumps and light's
* Test booted all 3 PC's

Well... as mentioned before, have been putting quite alot of time into cable management, its now officially day 6 of the management... and a decent 30 hours has allready gone into it 0.o

God i hate this amount of cables... but hey... hopefully its gonna look decent when its done

Also tried to hook up the screen earlier, works flawlessly =)

http://grevaeg.com/images/case010/010809up/images/IMG_5649.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5651.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5652.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5653.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5654.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5655.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5656.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5657.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5658.jpg

http://grevaeg.com/images/case010/010809up/images/IMG_5659.jpg

[grevaeg]

DBk4YPh1R9c

http://www.youtube.com/watch?v=DBk4YPh1R9c

[grevaeg]

http://grevaeg.com/images/case010/lowress.jpg
Rightside design done.... this is the entire case side ^^

Should be done with the rightside one aswell later today

[grevaeg]

Finale?

nah... afraid not... but hey... getting truly close to finishing this project =)

Windows 7 installed on all 3 comp's, running flawlessly, the temp seems to keep stable at 34c full load on the phenom 955 + 4870x2 loop

Its not making any noise at all practically speaking, ill get a DB measure up within the next days

The final weight for those who's wondering is 63KG

The dragon is done, but still need the sponsor marks up there, and the watercooling has been filled up, should be able to get some benches soon aswell


http://grevaeg.com/images/case010/070809up/IMG_5679.JPG (http://grevaeg.com/images/case010/070809/IMG_5668.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5668.JPG

http://grevaeg.com/images/case010/070809up/IMG_5662.JPG (http://grevaeg.com/images/case010/070809/IMG_5662.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5664.JPG (http://grevaeg.com/images/case010/070809/IMG_5664.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5666.JPG (http://grevaeg.com/images/case010/070809/IMG_5666.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5668.JPG (http://grevaeg.com/images/case010/070809/IMG_5668.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5669.JPG (http://grevaeg.com/images/case010/070809/IMG_5669.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5670.JPG (http://grevaeg.com/images/case010/070809/IMG_5670.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5671.JPG (http://grevaeg.com/images/case010/070809/IMG_5671.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5672.JPG (http://grevaeg.com/images/case010/070809/IMG_5672.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5673.JPG (http://grevaeg.com/images/case010/070809/IMG_5673.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5674.JPG (http://grevaeg.com/images/case010/070809/IMG_5674.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5675.JPG (http://grevaeg.com/images/case010/070809/IMG_5675.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5676.JPG (http://grevaeg.com/images/case010/070809/IMG_5676.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5677.JPG (http://grevaeg.com/images/case010/070809/IMG_5677.JPG)

http://grevaeg.com/images/case010/070809up/IMG_5678.JPG (http://grevaeg.com/images/case010/070809/IMG_5678.JPG)

So... what might be left?

* Screen cover on the backside
* mobo consealer on the rightside
* cathodes and LED's
* power button's
* HDD rack hider for the holders thats left empty for now
* get sponsor decals

Thx for tagging along on this build guys and ladies, truly appreciated with all the support thats been given =)

[grevaeg]

Hi guys! As some of you might know is the yearly "The Gathering" LAN party in vikingskipet Norway coming up soon.... hopefully will it be around 6000 contestants around in a large hall ^^

and when that is done, will it be time for me to move on....new ideas allways emerge when you give it enough time, and the modding mind is starting to have some cravings again.. i believe this would be some kind of mentally illness, but a strive for perfection still persist

Would therefore be happy to announce that the 6th GeN project is going for sale quite soon, to make headroom for well... 7th gen, lol

The project have had a build cost of a staggering 14,000 USD not counting in the time and effort to build it all

If anyone would have some interest , please dont hesitate to send me a PM =)

Best regards,

Christer Grevaeg

[grevaeg]

i like it :P

whens the next gen coming out? lol

Planning just started ^^

Guess ill give u guys a little heads up 0.o, The previous build got kinda large, and honest... its a pain in the ass to move around, lol

so i guess its time to size it down a notch, not much though... the 6th gen will be sold as a whole... including hardware, screens and cooling, will hopefully get a decent price for it so i can fund the upcoming build ^^

Going to get rid of the 500gb drives, and go up to 16x 2tb ones instead, assume that it will be one gaming rig + fileserver this time around, kinda considering getting a new phenom rig with a 5890 or two for now

There is no way in hell im going back to aircooling either... its just inferior ^^

Got a small design challenge now though... kinda hard to top the previous build... and the level of casemods around in this place and on bit-tech seems to be increasing, people are putting casemods to another league -.- so guess ill have to step it up aswell, theres allways room for improvement 0.o

Anyone got some wild ideas they would like to see implemented in the next gen?

[jdbnsn]

I have emailed grevaeg regarding his worklog images, his home page is gone too. Hope he's not dead.