Project: Black Mythical TJ07

[g0dd13]

http://i42.tinypic.com/2euto94.jpg

Black Mythical TJ07

The idea:

Ever since I started my project Bloodrage i was in love with the lian li v-2000 and the TJ07.
But because I couldn’t get my hands on the V2k I ordered a TJ07 instead.
But as you all may or may not know, If you mod a TJ07, it has to be clean ;)

So what’s my idea? Simply a clean case, clean exterior and interior, easy to swap or mod hardware if needed … And to finish it off a nice look, so simply, a TJ07 ;)

Sponsors:

Eddy @ It-service.be
Eddy @ EKwaterblocks.com

Hardware:

Mobo: Foxconn Bloodrage
CPU: Intel core I7 920
GPU: HIS ATI radeon HD5850
HD'S: 1x 150GB Velociraptor 2x 500GB Western Digital
Voeding: OCZ StealthXstream 700w
Case: Silverstone TJ07!

Watercooling:

1x EK-BAY SPIN Reservoir - Acetal
2x EK-Coolstream RAD XT (480)
2x EK-DCP 4.0 (12V DC Pump)
1x EK-Supreme HF - Acetal+Nickel
1x EK-FC5850 - Acetal
1x EK-FC5850/5870 RAM Backplate - Black
2x Yate Loon D80SL-12 + Red LED 80mm - 2000 rpm
8x Yate Loon D12SL-12 Clear + Red LED 120mm - 1350 rpm
Black series Fittings and EK High-Flow Fittings

Sketchup Mockup:

http://i42.tinypic.com/15xpagh.jpg
http://i39.tinypic.com/10ibiup.jpg
http://i41.tinypic.com/15plpp3.jpg

The psu will be changed place to where the drive bays are normally.
2 480 rads will take place in the bottom compartiment.

The black box where the drive bays are located normally, is going to be made in Alupanel and Acrylplex (if I can bend it nicely) and otherwise Alupanel and polyester.

And all the rest is “wait and see ;)”

Updatelist:

Update 1 (http://www.thebestcasescenario.com/forum/showpost.php?p=289542)
Update 2 (http://www.thebestcasescenario.com/forum/showpost.php?p=289543&postcount=3)
Update 3 (http://www.thebestcasescenario.com/forum/showpost.php?p=289544&postcount=4)
Update 4 (http://www.thebestcasescenario.com/forum/showpost.php?p=289545&postcount=5)
Update 5 (http://www.thebestcasescenario.com/forum/showpost.php?p=289546&postcount=6)
Update 6 (http://www.thebestcasescenario.com/forum/showpost.php?p=289547&postcount=7)
Update 7 (http://www.thebestcasescenario.com/forum/showpost.php?p=289548&postcount=8)
Update 8 (http://www.thebestcasescenario.com/forum/showpost.php?p=295277&postcount=14)

Grtz,
g0dd13

[g0dd13]

http://i44.tinypic.com/kbss51.jpg

2 Orders came in today:

http://i39.tinypic.com/cl3ex.jpg

http://i42.tinypic.com/t8w64l.jpg


Pictures are taken with a crappy camera,
My dad ran off with the good one on vacation…

grtz,
g0dd13

[g0dd13]

http://i43.tinypic.com/1z2j9g3.jpg


Small update,
I unpacked the pumps, and mounted them on the pumb brackets.

What I liked about these pumps is the packaging, I never seen something like it for pc hardware :D
Nicely done!

http://i41.tinypic.com/iyl7dj.jpg

http://i39.tinypic.com/99e05i.jpg

http://i42.tinypic.com/rc3uq8.jpg

http://i41.tinypic.com/2qnz4ee.jpg

Now I have to wait until I get the pc case … :-(

Grtz,
g0dd13

[g0dd13]

http://i41.tinypic.com/243p3qe.jpg

Howdy people,
Today I came back from school and I saw a packet standing there alone infront of the door ….

At first I was happy but then I was angry because the delivery company shouldn’t let any packet just stand there, doesn’t matter what price is paid …

So now i would like to present to you,
Something that not a lot of people hae seen before…

De EK-BAY spin res DUAL loop!

http://i41.tinypic.com/2czyesw.jpg

http://i44.tinypic.com/2whqweh.jpg

Hope you like it ;)

One of these days i am going to go and get my order from IT-service together with my case :D

Grtz,
G0dd13

[g0dd13]

http://i44.tinypic.com/2nbhfmh.jpg

Last order is in:
-TJ07
-Fittings & fillports
-Sabotaz spraycans
-Alupanel
-Rad mount

http://i41.tinypic.com/eued7k.jpg

Now the project will not be touched for a week,
I am gong on holiday to south France for a week ;)

grtz,
g0dd13

[g0dd13]

http://i44.tinypic.com/sdzqye.jpg

Painted tj07
http://i42.tinypic.com/2s7850n.jpg

Now it’s going to be measuring measuring measuring, cursing because something won’t fit :p

Don’t expect a lot of updates this month, I have exams coming up …

grtz,
g0dd13

[g0dd13]

http://i43.tinypic.com/28lt5jk.jpg

Small but important update:

http://i39.tinypic.com/25sy5nt.jpg

http://i43.tinypic.com/5by691.jpg

http://i41.tinypic.com/5dl0dz.jpg

http://i41.tinypic.com/hw0q9u.jpg

http://i43.tinypic.com/r25540.jpg

http://i43.tinypic.com/mjv5fn.jpg

http://i43.tinypic.com/153pj88.jpg


grtz,
g0dd13

[g0dd13]

http://i40.tinypic.com/24yzgnq.jpg

Finally the new GPU came in !!!!

http://i43.tinypic.com/w1r234.jpg


I cannot predict when the next update is going to be as I have exams coming up soon …

grtz,
g0dd13

[SXRguyinMA]

this should be interesting. can't wait to see more!

[g0dd13]

this should be interesting. can't wait to see more!

Thanks man, my dad just came home from holidays,
and he used to be a carpenter and he is a handy man :p
So yeah, he can help out a lot with some of the precision cutting.

[Loki]

Great sketching work!!!
And you have some sweet materials there ....

[x88x]

Looks like a great start. Is that a 120x4 rad I see? :twisted:

[g0dd13]

Looks like a great start. Is that a 120x4 rad I see? :twisted:

That's correct, the second one is still in my old build :D

[g0dd13]

http://i50.tinypic.com/34nfsep.jpg

Now the exams are finished and I had a very good result,
it is time to continue modding!

What did I do in the meantime?
-Unsleaved the fans and sleaved them seperately (I sleaved them together in project Bloodrage)
-I mounted the rads and fans on the rad mounts
-Mounted the rads in the case "basement"
-And I checked out the routing for the hoses

And finally, the pictures!

http://i48.tinypic.com/fuynpg.jpg

http://i48.tinypic.com/8yddty.jpg

http://i47.tinypic.com/2vdo08w.jpg

Grtz,
g0dd13

[x88x]

Mmmmm, giant rad-y goodness. :D Incidentally, I would have run them directly in series, so I would only have 2 hoses coming out. ...unless they're for two separate loops.. :twisted:

[g0dd13]

Mmmmm, giant rad-y goodness. :D Incidentally, I would have run them directly in series, so I would only have 2 hoses coming out. ...unless they're for two separate loops.. :twisted:

Hell yeah!
They are indeed for 2 loops,
I don't mind the hoses,
they will look good when they come above surface.

Just wait and see ^^

grtz,
g0dd13

[Loki]

Great space usage on that case!!!

[g0dd13]

http://i31.tinypic.com/33zaasm.jpg

So, we have good weather, so this is a good opportunity to post an update for you guys ;)

I've made some kind of "brackets" to mount my reservoir and DVD.
It is not 100% finished yet because I am going to do some more etching works on it I think ...

But here are some pictures as it is now so you can see what my plan is ;)

http://i28.tinypic.com/jrs3mw.jpg
http://i26.tinypic.com/2cheti.jpg

Grtz,
g0dd13