Jolly's Tech Bench 2010

[Jolly-Swagman]

Jolly's Tech Bench 2010

This is going to be a Scratch Build - Total Recycle of an Old Project had a few years back and originally was one of my first SmoothWall Firewalls,
(made build in a simple wooden case )

The Old
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/DSC_00070001.jpg
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/SmoothWall3001.jpg


I am going to make from the Old and Recycle some of the Wood Case to make the New Jolly's Tech bench, for general Testing and Benching in my Workshop Garage

Also will be Incorporating some NMC style to it even though I wasnt in the Competition as I was one of the Competition Judge;s,

First Anniversary NMC Themed Case Mod Contest


Official NMC Contest Web Page - Rules and Information (http://www.forum.newmodcity.com/viewtopic.php?f=8&t=425)


I just needed something to do, kinda getting to Quiet and bored round here so, with a little Time up my sleeve and No Money for Real Case Modding
The only outlay here is for some Paint, as everything else is from scraps left over in garage from other previous Mods!


Materials List
The Old wood case, and extra wood (already have)
Some wood Screws (already have)
Some Plexi (left over pieces from The Sled Project)
HDD cage/CD-DVD drive cage ( left over from old case)
Spray Paint Cans Matt Black x 2 - Purple x1 - Sandpaper (cost $15.00AU)
Spray Clear Coat Satin x 1.5cans(already Have)


Recycling at it's Best!


This Project however has been Entered in the Case Modding Showdown 2010

(http://showdown.newmodcity.com/2010files/1004.htm)
Hosted by NewModCity.com

CONTEST RULES & GENERAL IFO (http://showdown.newmodcity.com/2010files/1002.htm)



#1 Update 21st Jan 2010

So I Have Started on the Recycle/Revamp of the old Wooden Case to be Now used as Jolly's Tech-Bench 2010,

First I pulled the Back off and the base that housed the Motherboard + HDD ( Had already previously been Removed and stored)

Now the Old Top has become the Base and added 2 Rails Across the Back Top & Bottom

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/MainFrameRedone.jpg

Made 120mm Intake Opening for PSU Air intake on Bottom Base Plate

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/PSUAirintake.jpg

Cut out CD Drive /Removable HDD Caddy Bay and Front Window Cutout (Plexi Panels will go on these two areas)

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/CD-HDDRackOpenings.jpg

Made Right Side Panel with Mounting Cutout for PSU (Recycled from old Case panels)

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/PSUMountingPanel.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/PSUMountingSidePanel.jpg

Made Left Side Panel with 120mm Intake vent and Inspection Opening ( for getting access to CD Drive Cage)
Also cut 120mm hole (was 80mm before) and access slot in wooden case side.

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/120mmIntakeFan-InpectionPlate.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/SidePanelwithInpectionSlot.jpg

Made Plexi Cover Panel for CD Drive/HDD Caddy Bay

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/CD-HDDRackPlexiPanel.jpg

Cut Top Deck which will also be hinged at rear, and Front Plexi Window Panel ( will also have PWR/RST SW and LED.s PWR/HDD activity ect on it)

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/TopDeckandPlexiwindow.jpg


Made HDD Drive Bay with 80mm Cooling Fan Plate



---------------------------------------------------

Things to Do
Finish cutting Side Panel slots in 120mm Side Intake vent
Cut Cable Management Slots in Top Deck for M/B access
Make Mounting for M/B PCI Brackets ( GPU ect)
Sand and fill old holes
Paint main Frame and Side Panels, also Top Deck (Special Paint effects)
Paint CD Drive Bay Cage and HDD Drive Bay Cage
Mount Rubber Feet to Base

NOTE - May Have a Little Hold Up as my Power Drill Blew up :bang head
Has lasted me quite a good time 10yrs so guess is time for New one,
but will have to wait couple weeks maybe, as NO Money at this time for New One!

Time Spent 10hrs
Money Spent = $15.00AU (spray paint cans x3, sandpaper, non-slip matt)



#2 Update 22nd Jan 2010

Finished off Cutting slots in Side Panel 120mmFan intake,
Made side Panel inspection Cover,
Finished Drilling and Cutting Slots in Top Deck for Cable Routing,
Made strengthening Bracket for Drive cage, added 10mm alu angle for mounting to main frame,
Gave everything its first Base Coat of Matt Black Paint

Top Deck Painted Base Coat
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/TopDeckBaseCoat.jpg

Main Frame Painted Base Coat
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/MainFramebasecoat.jpg

Drive Cages & Side Panels Painted Base Coat
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/DrivecagessidepanelsPaintedbasecoat.jpg

Things To Do
Make Mounting for M/B PCI Brackets ( GPU ect)
Second Coat Paint and special Effects
Mount Rubber Feet to Base ( need to get these)
Mount M/B Standoffs
PWR + RS Switches (need to get)
HDD + PWR LED (have these)


Time Spent 6hrs
Money Spent = $.00
--------------------
Total Money Spent =$15.00AU



#3 Update 24 Jan 2010


Here are some Pics of the Paint effect I am using on the Side Panels

Side Panel for PSU Mount
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/SidePanelPainteffect-PSU.jpg

Side Panel 120mm Fan intake and inspection Panel
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/SidePanelPainteffect-120mmFan.jpg

Inspection Panel
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/InspectionPanelPainteffect.jpg

Also have made plate to go on HDD Cage to hold 80mm Cooling Fan

HDD Cage with 80mm fan holder
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/HDDCagewith80mmFanholder.jpg



Just small update still have to do second coat Main Frame and Top Deck and Special effect to Front of Main Frame, then Mount Side panels.

The Main Frame and Top Deck will also get Clear Estapol Clear Coat along with the HDD Cage and Drive Bay Cage

Time Spent = 3hrs
Money Spent $0
----------------------
Total Money Spent = $15.00AU

Other To Do,s
Make Mounting for M/B PCI Brackets ( GPU ect)
Mount Rubber Feet to Base ( need to get these)
Mount M/B Standoffs
PWR + RS Switches (need to get)
HDD + PWR LED (have these)

Also need to Get M/B Header plugs and leads for PWR/RST and HDD/PWR Leds.

Having trouble tracking down the Headers, if anyone has some spare or know where can get much appreciated!








So stay Tuned as More to come soon!

[Jolly-Swagman]

#5 Update 01 Feb 2010

Today I have Finished Front Panel wiring for PWR/RS Switches and LED,s, also added Banana Sockets for Testing Purposes.
I have three installed Black - Negative Post, Yellow - 12 Volt Post , Red - 5 Volt Post
These are wired to Molex Socket Plug and also have corresponding LED,s to show Powered State.
Have also a Molex 4 pin Plug with some Banana Plugs that can be used for Testing ect.

Front Panel Finished
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/FrontPanelWiried.jpg

Close-Up Front Panel
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/FrontPanelCloseUpshot.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/FrontPanelBananaSockets.jpg

Wiring Loom Finished
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/Finishedwiringloom.jpg

All Done Finished
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/FinishedFinal.jpg

Outdoor Pics
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/OutdoorPic.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/OutdoorPic-1.jpg



Time Spent = 6hrs
Money Spent + $0
--------------------------------------------
Money Spent Total = $28.80.00AU
--------------------------------------------

Things To Do!

- Make Video
- Take some more Pics when Cooler Weather Been to Hot here at Moment


#6 Update 4th Feb 2010

Jolly's Tech Bench Video

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/T70jKl5cOgA&amp;hl=en_US&amp;fs=1"></param><param

name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed

src="http://www.youtube.com/v/T70jKl5cOgA&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true"

width="640" height="385"></embed></object>




#7 Update 5th Feb 2010

After the very Hot weather we have had the Stick-on Velcro isnt sticking as well as it should,
so have decided to make an aluminium frame to hold the Flywire Mesh in place on the Rear of Tech Bench and also for the Bottom PSU Intake.

Finished Rear Screen
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/FinishedRearScrean.jpg

Bottom PSU Intake Filter
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/BottomPSUIntakeFilter.jpg



Time Spent = 3hrs
Money Spent + $8.20 (25mm x 2.5mm x 3000mm Flat Alu )
--------------------------------------------
Money Spent Total = $37.00.00AU
--------------------------------------------



Update Fri 19 March 2010


Made some Additions to Jolly's Tech bench 2010,

have now included a Cooling Gantry to help aide in cooling GPU area or could move/add for Ram too,

Also have it currently loaded up with Hardware from my Main Rig CM-690, as this one is going through a Total Revamp/Upgrade at the moment,
So will post log up shortly on that one too!

Cooling Gantry

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CM-690%20Revamp%202010/JTB2010LoadedHardwareandcoolingBrac.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CM-690%20Revamp%202010/JTBloadedHSFView.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CM-690%20Revamp%202010/JTBonDeskFoldinghome.jpg


All Up Running a back Folding again too!





That's all for Now Stay Tuned for More soon!

[Jolly-Swagman]

Update 26 May 2010


Had some Corsair Dominator's sent to me from a Forum buddy @ Overclokers.com Deadlysyn so I have installed them in Jolly's Tech Bench

Have also used Deb's old XFX-7600GT XXX edition GPU for now!
(just for testing purposes, as will have 8800GTX or 9800GT in later)

Also added Custom Ram Colling Fan and mount

Corsair Dominator's

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CorairDominatorsDDR2800.jpg



Installed on Tech Bench

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/CorairDominatorsOnTechBench.jpg

Custom Cooling Fan & Mount

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/CustomRamCoolingFanmount.jpg

XFX-7600GT & Cooling Fans

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/RamFanXFX7600GT.jpg

Jollys Tech Bench Garage desk

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/GaragePCTechBench.jpg

Since the weather here has cooled down some what, the Q6600 OC'd easily to 3.6 Ghz with these Dominator's,
But for 24/7 running 3.2 Ghz is enough on the Power consumption for Folding and the Temps are awesome 23C 20C 22C 20C idle,
and 43C 42C 40C 40C @ Load while Folding SMP2 on four Cores and a PDD of over 7000 !

Folding PDD
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/JollysQuadGaragePDD.jpg

Folding Temps @ LOAD
http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/Jolly%20-Tech-Bench-2010/JollysQuadGaragePC.jpg



Thats all for this New Update!

Will post up Some Benchmarks soon!

[billygoat333]

I like the looks of this. very cool :)

[Jolly-Swagman]

I like the looks of this. very cool :)

Thank you billygoat333, :)

[Loki]

This pc must be a great addition to wour workplace! Congratulations!

[Jolly-Swagman]

This pc must be a great addition to wour workplace! Congratulations!

Thanks Loki, :)


Update Wed 18th August 2010


Installing the CoolIT VANTAGE ALC

In Jolly's Tech Bench 2010

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CoolITVANTAGEALCUn-Boxed-2-1.jpg


Current Set-Up on Jolly's Tech Bench 2010 with the Q6600 @ 3.2Ghz and cooled with Vendetta 2 HSF,

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/JollysTechBench2010.jpg

There are some Screen shots in above Post for Core Temps ect, and also since being so cold here lately the Temp,s

are even better than above with Q6600 @ Full Load sitting nice @ 30C -35C across all 4 cores


So on to Dismantling Jolly's Tech Bench to make ready fro CoolIT VANTAGE ALC Installation


Dismantling Jolly's Tech Bench

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/DismantlingJollysTechBench.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/MoboreadytoInstallCoolITVANTAGE.jpg


With Mobo off and Vendetta 2 Removed, just leaving the HR-05 NB HSF, it was now onto making another Fan Shroud for the Coolit VANTAGE ALC

Now the last one was simple , but this one needed some modding to be done to it, as where the screw holes go it was the solid closed type,
As seen in pice below, with one corner done

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/Converting120mmFantoShroud.jpg


Now with the 120mm Fan shroud made its on to installing them on the CoolIT VANTAGE ALC with a second 120mm x 25mm Antec Tri-Cool Fan

So the configuration will be Push Pull,,, ( <<<< Airflow) Drawing cool air
<<<< | Antec 120mm x 25mm Fan |120mmx 20mm Shroud |CoolIT RAD|120mm x 25mm Shroud |120mm PWM Fan | Black fan grill <<<<


http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CoolITVANTAGEwithShroud-1.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CoolITVANTAGEwithShroud-2.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CoolITVANTAGEwithShroud-3.jpg

Close-Up of the Shroud Set-Up

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CoolITVANTAGEwithShroudsCloseup.jpg

Then made a Bracket to mount the CoolIT VANTAGE ALC on the Cooling Gantry of Jolly's Tech Bench,

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CoolITVANTAGEmountingbracket.jpg


Installation to Jolly's Tech Bench

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CoolITVANTAGEInstallingtoJollyTechBench.jpg

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CoolITVANTAGEInstalledonCoolingGantry.jpg


CoolIT VANTAGE ALC Coolant Temp Alarm @ 17C

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/LowTempsBeeeep.jpg

All installed Ready for some testing and Loading Newly Replaced HDD with Win7 Pro x64 OS

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/AllInstalledreadyforTestingJollysTechBench.jpg

Installing Wn 7 Pro x64

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/InstallingWin7-JollysTechBench.jpg

Testing and OC

CPU-z Validation

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/CPU-zValidation32Ghz.jpg


CPU-z & CoreTemp

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/ScreenCapture.jpg

Folding@Home SMP -4

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/FAHScreenCapture.jpg

Very Happy with the Results of Temps on Par with the Vendetta 2 HSF,
The only Quibble I have is that it took some time for the Dam Beeping Alarm on the CoolIT VANTAGE ALC to stop as

when the Coolant is below 19C it beeps,
So when the system was Idle Coolant Temp was @ 15C then after a while Folding @ 100% Coolant slowly raised to

above 21.5C Beeping Alarm stopped

Q6600 Cores Temps were around 25C-29C but have since settled to 22C-25C across the Cores

So overall the Set-up Configuration I have is Pretty good and fairly Quiet too!

Impressed!

[Jolly-Swagman]

Update Tue 24th August

----------------------
Jolly's Tech Bench
----------------------

Ran Prime95 for a few hrs as a Torture Test to see the Max Temps of the cores using the CoolIT VANTAGE ALC

Also see CoreTemp running too showing Max Temp @ 42C - 44C - 45C - 46C 100% load @ 3.20Ghz

CoolIT VANTAGE coolant Temp @ 25.2C

Prime95 Screenshot

http://i144.photobucket.com/albums/r169/Jolly-Swagman/PC%20Stuff/CoolIT%20VANTAGE%20ALC%20Cooler/Prime9524-08-2010.jpg

Tests were conducted with an Ambient Temp @ 15C in the Garage Room