Dual 120mm grills

[TheGreatSatan]

Does anyone know where I can get a dual 120mm grill like this (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=540&products_id=26520&zenid=3baa3defc4bf1e104aa5e700ff9fc0ce), but for a lot cheaper? I like the wide horizontal lines and want to avoid round mesh or honeycomb.

I might have to make my own for this project, but was just hoping that this would be one thing I didn't have to fab.

[NightrainSrt4]

You've got The Radgrillz Stripes (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=3697) but it isn't anywhere near as wide openings.

There's also Phobya Grill (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=28822) which has rounded edged holes that look a bit wider than the radgrillz.

Not sure if there is anything else. I made my own that are similar. You could probably do the same if you were inclined.

http://img132.imageshack.us/img132/1055/img2106b.jpg

http://img132.imageshack.us/img132/160/img2126p.jpg

[TheGreatSatan]

^I can't do that

[slaveofconvention]

I think one of the reasons those are so expensive is they involve mechanisms etc to allow rotation - might be worth seeing if they do a static one. On another note, if you're googling for them, you're probably better off looking for radiator grilles, not fan grilles if it's 2x120 you need

[TheGreatSatan]

I noticed that in his links above. All for radiators

[x88x]

Another vote for AC Ryan RadGrillz. Check out your Microcenter, actually, the one near me carries some AC Ryan stuff. Also, I have a 3x120 RadGrillz Stripes Aluminium Black sitting around that I picked up on clearance. ..I could probably be persuaded to let it go for pretty cheap.
http://www1.acryan.com/_radgrillz/index.shtml

[Konrad]

Do they have to be made out of metal? Plastic would be easier to cut.