Tutorial: Soldering Iron Tip Maintenance

[Oneslowz28]

A new story entry has been added:

Tutorial: Soldering Iron Tip Maintenance



http://www.thebestcasescenario.com/slaveofconvention/banners/series/solderingbyoneslowz28/102.png
(http://www.thebestcasescenario.com/frontpage/?q=soldering+iron+tip+maintenance)By Charles Gantt( Oneslowz28 )

Before, during, and after every soldering session, a little bit of routine maintenance can make all the difference between an easy, straightforward session with your iron, or a long, involved period of fluent bad language when things keep going just that bit wrong. Read on for more information on what you can do to maximize your chances of success when playing with molten metal...More (http://www.thebestcasescenario.com/frontpage/?q=soldering+iron+tip+maintenance)

[TheMainMan]

Thanks for such a clear tutorial. I've been doing most of this but have been forgetting to tin the tip after cleaning, good to have a reminder.

[SXRguyinMA]

nice write up! how about some info on using the acid cleaners like the little tin that you can get from the shack?

[Oneslowz28]

The acid tip tinners like they sell at The Shack for $10 are great for quick cleaning but I find that people use them way more than they should which results in short tip lifespan. I have one and in the 4 years I have had it I think I have used it 8 times. I only use it when the tip is very far gone or I bump some plastic with it. It's also great for those times when you are in mid build and no amount of wiping will allow you to tin tip. Using them you do not have to wait on the iron to cool. But again that convenience comes at a cost.

If you do buy one remember that is made from a very acidic flux and tiny solder balls. It will eat your tip away if you use it very often.

[SXRguyinMA]

cool thanks! I have one but never used it, just wondering the proper way, thanks!

[rgathright]

Good work! My soldering iron tips look like a dog chewed them. :)

[NightrainSrt4]

Nice work!

Is it better to have the iron hot or cold when cleaning using the methods presented?

[xr4man]

all the methods in the tutorial need to be done with a hot iron.

[Oneslowz28]

That is correct. The iron needs to be hot for all the steps performed in this tutorial. If you have some stubborn oxidation that these methods will not remove and you have even tried the acid cleaner method with no avail, you can let the iron cool and use a razor blade to scrape some of the toughest oxidation off.

If all else fails, as a last resort you can remove the soldering irons tip and chuck it into your drill and use some 400 grit wet sandpaper to remove all of the oxidation. Then use 600, 800, and finally 1200 grit wet sandpaper to bring the tip to a bright finish. Then tin the whole area that was sanded with fresh solder.

[SXRguyinMA]

or you can go to the shack and buy a replacement tip for a few $ as well, I've got a spare one for mine sitting around just in case

[Oneslowz28]

Yea if you use the < $50 irons from the Shack, they sell the replacement tips for a few bucks. You can get a deal also by searching on ebay. I won 25 tips for my iron last year for like $7 shipped.

[xr4man]

this is what i use. unfortunately, tips are not available at the shack, nor are they cheap, so maintenance is a must. i use a different tip than the one shown in the picture.

http://www.okinternational.com/images/big_photos/MX_500S.jpg

[NightrainSrt4]

I've always done it with a hot iron, but the article didn't specify, so I figured I would get a clarification.

[Oneslowz28]

I apologize for that mistake. I will add it in the tutorial later today.

[adnan202]

The Microsoft Certified Systems Administrator (MCSA) certification Program helps to validate an individual's ability to manage and troubleshoot network environments based on the Windows Server 2008 operating system. because I have never had any idea of these things that in this modern world we are going to be in that kind of technology filed where we have to be best on our capabilities to success and stay at top. I have been always a fan of innovation and new things in life so doin these kind of courses like CCNA, MCSE and other certifications which can not only help you for your future but also makes you unique in this field as well.. so very happy to be part of this and want you guys to also have a look at them because once you will join it and have a study on these, you surely gona like it and appreciate the effort...this is all what I can say, rest of you will decide. thanks!!! <a href="http://www.test-king.com/exams/HP0-S28.htm">HP0-S28</a> | <a href="http://www.test-king.com/exams/HP0-S25.htm">HP0-S25</a> | <a href="http://www.test-king.com/exams/646-364.htm">646-364</a> | <a href="http://www.test-king.com/exams/642-374.htm">642-374</a> | <a href="http://www.test-king.com/exams/642-384.htm">642-384</a> | <a href="http://www.testking.org/HP0-S30.htm">HP0-S30</a> | <a href="http://www.testking.org/JN0-360.htm">JN0-360</a> | <a href="http://www.testking.org/642-681.htm">642-681</a> | <a href="http://www.testking.org/646-656.htm">646-656</a> | <a href="http://www.testking.org/BH0-006.htm">BH0-006</a> | <a href="http://www.testking.eu/exam/HP0-S30.htm">HP0-S30</a> | <a href="http://www.testking.eu/exam/JN0-360.htm">JN0-360</a> | <a href="http://www.testking.eu/exam/642-681.htm">642-681</a> | <a href="http://www.testking.eu/exam/646-656.htm">646-656</a> | <a href="http://www.testking.eu/exam/BH0-006.htm">BH0-006</a>