x88x
03-18-2011, 07:08 PM
Ok, I'm fed up with trying to wrestle my computer into submission and after my fourth MBB with this system, and it not being in working order since November, I'm done. I'm selling off the core components and getting a 1090T (yes, I know, Bulldozer is just around the corner, but I want it NOW! :mad: I'm sick of my computer sitting there being a big, heavy, very expensive, paperweight. I'll deal with Bulldozer when it launches.). I don't have pictures right now, but I'll post them when I get home.
All prices are before shipping.
All electronic components are tested, working, and guaranteed not DOA.
All shipping will be through USPS unless otherwise requested.
Payment though Paypal is preferred, but other methods are open to discussion.
If you have any questions, feel free to ask.
##################################################
Danger Den MPC-CPU LGA775 waterblock: (http://www.dangerden.com/store/mpc-cpu-775-quad-core-block.html)
100% copper base.
Hand-lapped to 2500grit.
I still have the thumb-nuts and nylon washers from the mounting kit, but have lost the tension springs (I originally used it in a very small space, so I very carefully hand-tightened them).
Includes two fittings of your choice from my stores (we'll discuss that once someone makes an offer).
Goes for $42.95 atm, with no fittings.
I'll take $25
I can't get a good picture of this until I break down my loop (tomorrow night, hopefully), but here's a link to DD's photos:
http://www.dangerden.com/store/popup_image.php?type=D&id=385&title=MPC-CPU%20-%20775%20Quad%20Core%20Block&area=C
Picture that, but lovingly lapped to a fine finish. :D
##################################################
Hardware Labs Black Ice XtremeIII radiator: (http://www.dangerden.com/store/black-ice-xtremeiii-radiator.html)
3x120mm
G1/4 fittings
Includes two fittings from my stores (we'll discuss that once someone makes an offer).
Goes for $70 retail with no fittings.
I'll take $45
http://i428.photobucket.com/albums/qq3/x13931x/zuess_08.jpg
##################################################
Cooler Master CM690:
Missing both side panels.
Otherwise in perfect condition.
Perfect for parts or a custom side-panel job.
Side-panels available from Cooler Master for $10 each:
http://cmstore.coolermaster-usa.com/product_info.php?cPath=18_25&products_id=337
http://cmstore.coolermaster-usa.com/product_info.php?cPath=18_25&products_id=338
$25
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_11.jpg
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_12.jpg
##################################################
SATA Male-Female 90-degree adapter:
Handy for tight spaces or permanent cable routing.
5 available.
$1.50 each
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_04.jpg
##################################################
SATA Female-Female 180-degree adapter:
Handy for extending cables or for permanent cable routing.
2 available.
$1.50 each
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_04.jpg
##################################################
Bitspower G1/4" Fitting spacer with O-ring:
10 available
$0.75 each
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_03.jpg
##################################################
Bitspower G1/4" D-Plug set
Great for 2-slot SLI/CFX connections.
3 available
$2 each
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_08.jpg
##################################################
Bitspower G1/4" Crystal T-Block:
4 available
$1.75 each
http://i428.photobucket.com/albums/qq3/x13931x/tBlock.jpg
##################################################
Bitspower G1/4" Crystal L-Block:
5 available
$1.75 each
http://i428.photobucket.com/albums/qq3/x13931x/lBlock.jpg
##################################################
Bitspower G1/4" Crystal Q-Block:
2 available
$1.75 each
http://i428.photobucket.com/albums/qq3/x13931x/qBlock.jpg
##################################################
Bitspower G1/4" Low-profile stop-fitting plug:
4 available
$1 each
http://i428.photobucket.com/albums/qq3/x13931x/stopFitting.jpg
##################################################
Danger Den Brass fillport:
$4
http://i428.photobucket.com/albums/qq3/x13931x/fillport.jpg
##################################################
AC Ryan UV paint:
1oz bottles
1x UV Orange
1x UV Red
1x UV Blue
1x UV Yellow
2x UV Green
$1 each
http://i428.photobucket.com/albums/qq3/x13931x/paint.jpg
##################################################
Steelseries mouse glides:
5 glides per pack.
2 available
$2 each
http://i428.photobucket.com/albums/qq3/x13931x/mousePads.jpg
##################################################
UV Green plexi 120mm skull fangrill:
3 available
$0.75 each
http://i428.photobucket.com/albums/qq3/x13931x/fangrills.jpg
##################################################
Assorted PSU power connectors:
18x black SATA right-angle, no back-plates
20x light blue SATA right-angle with backplates
10x black molex male
10x UV green aux
12x UV blue molex male
8x UV blue molex female
$0.20 each
http://i428.photobucket.com/albums/qq3/x13931x/connectors.jpg
##################################################
TI-83+ with USB GraphLink
I stumbled across this yesterday and realized I hadn't used it in years. So I figured I would throw it up here in case someone might have use for it. These are great devices, and the only reason I upgraded from it was because my Differential Equations prof required that we all get 89's. The cover is missing one of the rubber feet and there is a bit of residue on the cover from when I had it covered in ducktape (removed a couple years ago, I've scratched most of it off). Aside from that, it's in mint condition. They may not have changed the hardware much in the last 20 years, but they really do build these things to last. Manual and system-link cable also included. I don't know where the CD that came with the USB 'GraphLink' cable is, but it would be massively out of date by now anyways (I bought it back in 2002) and you can download the latest version from TI's website for free.
$55
http://i428.photobucket.com/albums/qq3/x13931x/ti83p.jpg
##################################################
All prices are before shipping.
All electronic components are tested, working, and guaranteed not DOA.
All shipping will be through USPS unless otherwise requested.
Payment though Paypal is preferred, but other methods are open to discussion.
If you have any questions, feel free to ask.
##################################################
Danger Den MPC-CPU LGA775 waterblock: (http://www.dangerden.com/store/mpc-cpu-775-quad-core-block.html)
100% copper base.
Hand-lapped to 2500grit.
I still have the thumb-nuts and nylon washers from the mounting kit, but have lost the tension springs (I originally used it in a very small space, so I very carefully hand-tightened them).
Includes two fittings of your choice from my stores (we'll discuss that once someone makes an offer).
Goes for $42.95 atm, with no fittings.
I'll take $25
I can't get a good picture of this until I break down my loop (tomorrow night, hopefully), but here's a link to DD's photos:
http://www.dangerden.com/store/popup_image.php?type=D&id=385&title=MPC-CPU%20-%20775%20Quad%20Core%20Block&area=C
Picture that, but lovingly lapped to a fine finish. :D
##################################################
Hardware Labs Black Ice XtremeIII radiator: (http://www.dangerden.com/store/black-ice-xtremeiii-radiator.html)
3x120mm
G1/4 fittings
Includes two fittings from my stores (we'll discuss that once someone makes an offer).
Goes for $70 retail with no fittings.
I'll take $45
http://i428.photobucket.com/albums/qq3/x13931x/zuess_08.jpg
##################################################
Cooler Master CM690:
Missing both side panels.
Otherwise in perfect condition.
Perfect for parts or a custom side-panel job.
Side-panels available from Cooler Master for $10 each:
http://cmstore.coolermaster-usa.com/product_info.php?cPath=18_25&products_id=337
http://cmstore.coolermaster-usa.com/product_info.php?cPath=18_25&products_id=338
$25
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_11.jpg
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_12.jpg
##################################################
SATA Male-Female 90-degree adapter:
Handy for tight spaces or permanent cable routing.
5 available.
$1.50 each
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_04.jpg
##################################################
SATA Female-Female 180-degree adapter:
Handy for extending cables or for permanent cable routing.
2 available.
$1.50 each
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_04.jpg
##################################################
Bitspower G1/4" Fitting spacer with O-ring:
10 available
$0.75 each
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_03.jpg
##################################################
Bitspower G1/4" D-Plug set
Great for 2-slot SLI/CFX connections.
3 available
$2 each
http://i428.photobucket.com/albums/qq3/x13931x/microcenterStuff2_08.jpg
##################################################
Bitspower G1/4" Crystal T-Block:
4 available
$1.75 each
http://i428.photobucket.com/albums/qq3/x13931x/tBlock.jpg
##################################################
Bitspower G1/4" Crystal L-Block:
5 available
$1.75 each
http://i428.photobucket.com/albums/qq3/x13931x/lBlock.jpg
##################################################
Bitspower G1/4" Crystal Q-Block:
2 available
$1.75 each
http://i428.photobucket.com/albums/qq3/x13931x/qBlock.jpg
##################################################
Bitspower G1/4" Low-profile stop-fitting plug:
4 available
$1 each
http://i428.photobucket.com/albums/qq3/x13931x/stopFitting.jpg
##################################################
Danger Den Brass fillport:
$4
http://i428.photobucket.com/albums/qq3/x13931x/fillport.jpg
##################################################
AC Ryan UV paint:
1oz bottles
1x UV Orange
1x UV Red
1x UV Blue
1x UV Yellow
2x UV Green
$1 each
http://i428.photobucket.com/albums/qq3/x13931x/paint.jpg
##################################################
Steelseries mouse glides:
5 glides per pack.
2 available
$2 each
http://i428.photobucket.com/albums/qq3/x13931x/mousePads.jpg
##################################################
UV Green plexi 120mm skull fangrill:
3 available
$0.75 each
http://i428.photobucket.com/albums/qq3/x13931x/fangrills.jpg
##################################################
Assorted PSU power connectors:
18x black SATA right-angle, no back-plates
20x light blue SATA right-angle with backplates
10x black molex male
10x UV green aux
12x UV blue molex male
8x UV blue molex female
$0.20 each
http://i428.photobucket.com/albums/qq3/x13931x/connectors.jpg
##################################################
TI-83+ with USB GraphLink
I stumbled across this yesterday and realized I hadn't used it in years. So I figured I would throw it up here in case someone might have use for it. These are great devices, and the only reason I upgraded from it was because my Differential Equations prof required that we all get 89's. The cover is missing one of the rubber feet and there is a bit of residue on the cover from when I had it covered in ducktape (removed a couple years ago, I've scratched most of it off). Aside from that, it's in mint condition. They may not have changed the hardware much in the last 20 years, but they really do build these things to last. Manual and system-link cable also included. I don't know where the CD that came with the USB 'GraphLink' cable is, but it would be massively out of date by now anyways (I bought it back in 2002) and you can download the latest version from TI's website for free.
$55
http://i428.photobucket.com/albums/qq3/x13931x/ti83p.jpg
##################################################