-O═HotRod═o-

[ArgOs]

HotRod

http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR001.jpg
Hi all, this is my project called HotRod. So this mod will be based on those cars.
The case that I work is a mini tower Cooler Master 341

http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR002.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR003.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR004.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR005.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR006.jpg
I remove the front plastic and then cut it.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR010.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR007.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR008.jpg

I paste the parts.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR009.jpg

the place where it will be.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/Tango-011.jpg

I remove all inside.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/Tango-013.jpg

adding new parts to the front.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/Tango-014.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/Tango-015.jpg

took off the metal front of case.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/Tango-012.jpg

is all for now, slowly will take shape.

[SXRguyinMA]

this is gonna be good :D +sub

[ArgOs]

this is gonna be good :D +sub

Thanks, I hope so too.:crossed:

[xr4man]

well hell, i was just thinking about a rat rod style case earlier this week. obviously you beat me to actually starting something.

i wouldn't have thought to cut the case at an angle to replicate the skinny nose of an old 30's vintage hotrod though.

i'll be watching this with interest.

[ArgOs]

Thanks, hope to see your work soon.
I continue with the creation of the front, radiator type.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR016.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR017.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR018.jpg

New front.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR019.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR020.jpg

placed temporarily.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR022.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR021.jpg

Support for DVD and HD, horizontally.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR023.jpg

I cut the top.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR024.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR025.jpg

Continuing with the creation of the Hot Rod grill
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR026.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR027.jpg
I put it on your site, to see how it would look.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR028.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR029.jpg
I remove the hard disk support.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR030.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR031.jpg
The side
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR034.jpg


:think: I don`t like it, needs to another change.

[msmrx57]

I LOVE the way this is starting out! That grill is off to an awesome start! :up: Subbed for sure.

[AnG3L]

This is true case modding!!! Gotta keep me updated man to get my daily fix!!! Subbed and +rep too!! :)

[ArgOs]

thank you very much msmrx57 :up:
AnG3L I'm following your work, you are a master :bowdown:

[TheMainMan]

I'm joining the subbed and repped crowd on this one! Love the look of the front already!

[x88x]

Hmmm, intriguing. Looks like this should be good. :D

[Kayin]

Very well done, this is for the CM contest as well, right? I hope you place well-we need more people really hacking cases.

[ArgOs]

Thank you very much to all :up:
Yes kayin, is for the CM contest.:crossed:
:facepalm:I decided to reduce the front 3 cm, to have a more aerodynamic appearance.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR033.jpg
I have to cut the front again :(
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR039.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR042.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR043.jpg
I need to change everything.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR041.jpg
look the inclination.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR050.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR049.jpg
The logo of "Hot Rod" of side was cut.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR036.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR035.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR037.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR038.jpg

[x88x]

Very nice. What did you use to make those curved cuts? Doesn't look like a cut-off disc or saw-blade cut..

[ArgOs]

Thanks, I use the Dremel with cutting disc and great patience.
I can not show yet but I am making a cut too complex to another case.
Old school :up:

[x88x]

Wow, impressive. Very clean cuts.

[ArgOs]

thanks x88x
I'm creating some new parts for the car. :D
V8
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR044.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR045.jpg

a new air intake. With a decoration as the vehicles of the 50's and 60's.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR046.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR047.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR048.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR051.jpg

Remove the feet(¿?) from the computer.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR054.jpg

prepare the base for the new feet.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR055.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR052.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR056.jpg

I created the place to put the power button on the front.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR058.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR059.jpg
is all for now.
could use a Cooler Master V8, if someone wants to sponsor my work, you know what to do.:redface:

[TheMainMan]

Love the look of the scoop and the V8 logo. That would be awesome if you could get your hands on a CM V8 cooler.

[The_Crippler]

Very drool-worthy progress on this. I'm just gonna warn you: If I ever get around to getting back to work on my hot-rod idea, I am stealing soooo many of your ideas from this. :D

I will also echo the other ones: Nice, clean cuts on the side.

[Mysteriphys]

I love cars, so obviously I have to love this, can't wait to see it when it's finished. awesome work so far!\

**thanks x88x ... just finished a 10 hour shift, and I was up 8 hours before that, I'm a little pooped lol

[x88x]

I love cars, so obviously I have to love this!

FTFY. ;)

[ArgOs]

Love the look of the scoop and the V8 logo. That would be awesome if you could get your hands on a CM V8 cooler.
thanks, hopefully!:up:


Very drool-worthy progress on this. I'm just gonna warn you: If I ever get around to getting back to work on my hot-rod idea, I am stealing soooo many of your ideas from this. :D

I will also echo the other ones: Nice, clean cuts on the side.
Hahaha, no problem making the idea that you need.;)


I love cars, so obviously I have to love this, can't wait to see it when it's finished. awesome work so far!\

**thanks x88x ... just finished a 10 hour shift, and I was up 8 hours before that, I'm a little pooped lol
I hate you





:D
hahaha! thank you :up:


FTFY. ;)
very attentive, thank you very much.:up:

[The_Crippler]

Hahaha, no problem making the idea that you need.;)


That grill alone solves a build issue I wasn't sure how to get around.

[ArgOs]

I have complicated, and I started tertiary school that, but I work weekends.
I started with the creation of the fender, first a model in cardboard, to take measures.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR061.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR60.jpg

Then, the most difficult, passing it to the sheet metal. :wink:
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR062.jpg
:up:
cutting and bending.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR063.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR064.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR065.jpg

Temporarily bolted, then will joined with pop rivets .
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR066.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR067.jpg

[x88x]

Nicely done; looks great. :up:

[msmrx57]

:eek: :eek: I didn't realize you were leaving the bottom alone, I just assumed the whole case would be tapered!!!
8)Awesome :up: Very original work.


By the way if that metal is galvanized (which it looks like to me) Take extra care in prepping it for paint and definitely get a good etching primer.

[ArgOs]

yes, it is galvanized, I sanded it first and then I paint it with paint for galvanized metal and aluminum.
I pop rivets to attach the fender, then I sand it.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR068.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR069.jpg

my new acquisition, a fan CooleMaster Megaflow.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR076.jpg

cut for the wheel.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR70.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR071.jpg

I prepare the sheet, sanding it.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR072.jpg

I put the putty.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR073.jpg

paint the front.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR074.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR075.jpg

[AmEv]

Schweet!

It looks fantastic already!

[x88x]

Ooo. :D

[BS Mods]

Great work on that thing!

I can't wait to see it finished.

[Fuganater]

This is so awesome. Great work dude!

[TheMainMan]

Great idea for the fan as a wheel. Looks good!

[ArgOs]

thank you very much to all:up:

Great idea for the fan as a wheel. Looks good!
Wait a little more and you will see:whistler:.

[AmEv]

I see "spinners" coming in the nearererer future.....

[ArgOs]

Humm... It's a good idea, I'll think ;D

[farlo]

killer stuff so far.

[ArgOs]

Continued killing stuff., Inside the fender, I placed a plate for better viewing and will pass putty for details..
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR077.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR078.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR079.jpg

Then I paint with primer.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR080.jpg

I pass sandpaper the to the other parts to pass after priming.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR081.jpg
The front and the air intake.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR082.jpg

I reinforced the top, I will pass the sandpaper and putty, then put the air intake and putty.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR083.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR084.jpg
I cut to the air intake.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR085.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR086.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR087.jpg

Then I reinforced the bottom and I made ​​some cuts.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR088.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR089.jpg

And finally I started to paint some parts.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR090.jpg

[ArgOs]

After the primer was sanded the surface to match it.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR091.jpg

Place a plate on her side, and you will see in the future.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR098.jpg

Then everything was painted shiny black.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR092.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR093.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR094.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR095.jpg

the hinge and silver color foot.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR096.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR097.jpg

Pictures of the progress of the painting.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR099.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR101.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR105.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR100.jpg

I cut the side to match the inclination of the case.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR102.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR103.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR104.jpg
Thanks to all for the comments.

[x88x]

Nice progress. Keep it up. :D

[ArgOs]

Thank you x88x
The side ready.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR114.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR113.jpg

I use a part that I cut the case, to create the side support.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR109.jpg

I will attach the hinge to the Side. As you will see there is much dust in my garage.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR108.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR110.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR111.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR112.jpg

I put a rubber at the foot, between the steel sheet and foot, other rubber will go under.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR116.jpg

I created the mesh brackets
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR106.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR107.jpg

I painted pop rivets.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR115.jpg

[x88x]

Nice! I like that door. :D Very unique.

[Fuganater]

Looking good man!

[TheMainMan]

Lambo-style wheel wells! That's awesomely unique!

[ArgOs]

Thank you very much
I hope to finish it takes very little time and I still have not finished the work. :(
Computer hardware.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR128.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR127.jpg

The Support for HD
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR119.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR120.jpg

I begin to put the hardware in their place.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR117.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR118.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR122.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR121.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR123.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR124.jpg

Other changes in progress. The filter of the air intake.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR125.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR126.jpg

[ArgOs]

I will finish it Sunday.
I show you a detail of HD support.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR143.jpg

The wheel clock :P
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR129.jpg

I completely disarmed.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR130.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR131.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR132.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR133.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR134.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR137.jpg

Electronic circuit.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR135.jpg

I cut the tires well
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR136.jpg

and the fan
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR139.jpg

I cut inside the tire and the fan
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR138.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR139.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR140.jpg

Put in place.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR141.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR142.jpg

[ArgOs]

finished work
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR144.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR145.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR146.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR147.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR148.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR149.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR150.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR151.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR152.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR153.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR154.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR155.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR156.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR158.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR159.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR160.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR161.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR162.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR163.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR164.jpg
Thank you very much to all and I hope to have a good performance in the CM tournament.

[AmEv]

Whoa!


Turned out WAY better than expected!

[licenseless]

AWESOME!!! the tire is just perfect man... now its time for a flame job hahahahahhaha

[ArgOs]

Yes, it needs the flames.
connected to my TV.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR1-008-3.jpg

[AmEv]

So, did you post a pic of the DVD drive open, with the front grille on?

[ArgOs]

It appears that your distrust of me, this weekend I'm going to film a mini-video so can you see it in action.;)

[ArgOs]

Is a bad video, but you can see the DVD drive, in action.
kd_5_atitBI
The music is a one of the best metal band from argentina, Rata Blanca.

[ArgOs]

"Changes out of competition "

The competition ended, but I decided to make some changes.
I decided to change the legs for wheels.
First I reduced the length of the wheels, because they are very high and this is a sports car.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR169.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR168.jpg

Then I put a rubber between the case and the wheels.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR167.jpg

and I put them in place.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR166.jpg

[ArgOs]

some modifications.
the fan
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR170.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR171.jpg

change the power supply to another more powerful, but bigger.
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR172.jpg

I make ​​some changes and remove wires leftover
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR173.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR174.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR175.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR176.jpg

inside
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR179.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR178.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/CoolerMaster2011/HR177.jpg