Project SCORPIO!

[DeviceUnknown]

Hey Guys, here we are with our best mod yet. Code named "Scorpio" (based off our company naming convention, not related to the sigil)

This mod is brought to you by http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/ttLogo.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/ktc_logo_hm.gif
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/OCZLogo.gif

Much love and thanks to my sponsors, without them, this mod wouldn't exist.

Were starting off with what is already a nice case the Chaser MK-I, really well built with a unique design. I like it. My only complaint is I wish it had a hot-swap backplane, which I think we will be putting in.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1327640.jpg
and mildly destroyed...http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1347.jpg
Were going to chop it up and spit out something we hope to be fantastic. Here is a very rough draft just to give you an idea where we are going with this.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/FarFlung-Rightside-1.jpg http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/FarFlung-LeftSide-1.jpg

Were making the entire left side a Reservoir for the Liquid Cooling. With a single radiator (to be determined later) extending out of the middle.
Were adding a large base to the case for stability as the left door will raise straight up vertically. You'll see that later. Waiting for the slides to come in.

You can see our opinions on the hardware we're putting in it to far at our website. www.deviceunknown.com

I started by adding hinges to the left door, due to it's weight in the future of the reservoir.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1064640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1065640.jpg

With the hinges on, it's ready to be cut out and a shroud built to extend a few inches to accommodate the home built reservoir and radiator/fans. That will come later.
Instead after the hinges i moved on to the right door and cut it out to be replaced by plexi in this shape. http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1066640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1067640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1068640.jpg

From there I will be making the extension to house a large fan and the CD-Rom mounted vertically, as seen in the draft. Once done the entire case will be painted White, with light blue highlights through out.

As far as the hardware, were not sure yet. Were working on a tri Crossfire or SLI setup with the best processor to be able to drive it. and obviously, full watercooling. We'll see how it goes.
Right now we have Thermaltake's 1500 Watt Beast powering it.http://i1105.photobucket.com/albums/h358/DeviceUnknown/Tt%201500/IMG_1352.jpg
This thing is awesome. Read my impressions at our website.
And check these beauties out. http://i1105.photobucket.com/albums/h358/DeviceUnknown/Kingston/IMG_1318.jpghttp://i1105.photobucket.com/albums/h358/DeviceUnknown/Kingston/IMG_1315.jpg
Kingston provided us with 16 Gigs of this extreme HyperX ram.
Also Kingston sent us TWO 120 Gig gorgeous SSD's http://i1105.photobucket.com/albums/h358/DeviceUnknown/Kingston/IMG_1309.jpghttp://i1105.photobucket.com/albums/h358/DeviceUnknown/Kingston/IMG_1306.jpg
These are the only drives that I have seen that are not just beautiful but FASTER than the listed speed, I could not have asked from any better anywhere.

OCZ sent me their Vertex 3 60 Gig SSD which I want to use in the top of the case in The chaser's build in hot swappable Hard drive bay. http://i1105.photobucket.com/albums/h358/DeviceUnknown/OCZ/IMG_1344.jpg
Something like this, but obviously smaller. The chaser's drive bay will hold all sizes of hard drives! http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/topdraft1.jpg

That's all for now guys, but were on this full time so be ready for more updates soon.


Again, thank you to Thermaltake, Kingston and OCZ. You guys are so great to work with and you honestly do have great products.

[DeviceUnknown]

My first post didn't seem "meaty" enough for my taste, so I decied to throw more stuff on here. Maybe this will give a better picture.
We revisited our right hand door design, and didn't like it. So we re-cut it. http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1069640.jpg
Then I went on to put Plexi in it, then moved into the making of the 1 3/4 extension on lower half. I put in the CD-Rom so you can see wher eit will be placed, facing the front of the case, vertical. http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1074640.jpg As you see,, I started on the housing also. I have something VERY cool in mind for that.

Then while the glue was drying I started on the top. Let me know what you think about this. I really like it.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3505640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3506640-1.jpg YEAH MADE IN USA!
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3507640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1072640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1073640.jpg

This next one is just a mock up. It's not in place and I have to go get the M8 bolts I want for it in chrome tomorrow. All the bolts will be M8's
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1075640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1076640.jpg

So, as I said, small update.
See you guys soon!

[DeviceUnknown]

We really want to thank the "Cadillac" of Liquid Cooling manufacturers out their, http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/EKWBLogo.png
for sponsoring the entire dual loop water cooling system were putting in this beast. Stay tuned for photos as soon as they arrive.

[DeviceUnknown]

Bill was kind enough to sponsor some great things we will be using on Project SCORPIO!
You have got to check out this fan. Simply beautiful.
Be sure to check out mnpctech's store. If you're a modder, they have essentials needed for that next great mod you're doing.

Click Image To Case Mod Store
http://www.mnpctech.3dpixelnet.com/picture_library/2010.mnpctech.banner.jpg (http://www.mnpctech.com/casemodstore.html)

Mnpctech 120mm Turbine Cooling Fan (http://www.mnpctech.com/TurbineFanMod.html)

http://www.mnpctech.com/120TurbineWb.gif (http://www.mnpctech.com/TurbineFanMod.html)

Mnpctech U-channel (http://www.mnpctech.com/UChannel.html)

http://www.mnpctech.com/Uchannel1.jpg (http://www.mnpctech.com/UChannel.html)

ATX Pin Removal Tools (http://www.mnpctech.com/ATX_Molex_Removal_Tools.html)



http://www.mnpctech.com/molex_pin_male_female_sleeve_tool_extractor.jpg (http://www.mnpctech.com/ATX_Molex_Removal_Tools.html)

http://www.mnpctech.com/24_pin_PCI_ATX_PSU_power_supply_sleeve_removal_too l_extractor.jpg (http://www.mnpctech.com/ATX_Molex_Removal_Tools.html)

Thanks again Bill, I owe you one.

[billygoat333]

Yay for sponsors!

[DeviceUnknown]

Well here we go, I may have to put this into 2 threads. First I wanted to show you just how beautiful EKWB products are. And what makes them even more impressive is how GOOD they are. I am very lucky to have a sponsor like EKWB. So without further a due.
Keep in mind that everything I am listing today is only for the video cards. The CPU loop will come at a later date.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3543640.jpg
This is everything in a nut shell.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3548640.jpg
3x 6950/70 Water blocks... now I have to find video cards for them lol. These are going to look absolutely beautiful with Mahems Dye in it.

http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3550640.jpg
VERY thick 360 radiator. This is just for the 3 video cards.

Check out this giant Reservoir. http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3549640.jpg
This thing just barely fits inside the case. Just how I wanted it.

EK-DCP 4.0 is the pump in the picture. This thing is plenty to push the liquid all through those cards. I'm not sure there is one more powerful. And then we have a ton of fittings to hook it all up. This should be good.


Ok, now back to the mod. We have gotten a lot done, were pretty happy.
Look at our little friend-
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3527640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3526640.jpg
He's just at home with Thermaltake. He is just a teaser, you'll see soon what we do with him.

We finally got the 7 inch LCD in, this shouls where we're putting it, but it's not in yet.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3524640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3525640.jpg

We managed to get the sliders on the right door today. I'm totally stoked about this. Looks great.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3523640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3522640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3521640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3518640.jpg

It opens 100% to the top.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3516640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3515640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3513640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3512640.jpg

With the body putty drying, I moved on to the front, cut out the little squares. I'll be putting blue plexy in.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1102640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1104640.jpg

I managed to squeeze in cutting the rest of the aluminum to be put on the front of the case also.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1092640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1091640.jpg

I also got the right door panel made, this is the housing that will hold the DVD recorder and the 200MM fan
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1084640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1083640.jpg

Welp, this should be enough for today guys. I hope the forums will accept so many pictures.

I'll have substantially more in a couple days, so stay tuned.

[billygoat333]

That is sick! and yeah, these forums are pretty good with picture heavy threads lol.

[DeviceUnknown]

Thanks Billy.

Big thanks to mnpctech for their sponsorship. They sent us some fantastic stuff I want to show you.

First off, check out this fan. I just HAD to have one!
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1120640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1122640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1125640.jpg

it's just awesome, and completely matches our mod. Wait till you see where we put it.

Nest, I always wanted a professional tool for sleeving cables. It was just one of those small purchases that I never remembered to make. Thanks to Bill I now have a set! They are smaller than they look, but very solid quality. I am not afraid at all of breaking these.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1126640.jpg

And lastly, I asked for some U-Molding. I have a lot of cuts in this case I would feel better covering for safety. This stuff is very small, perfect. It does not stand out like a sore thumb.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1128640.jpg

Thanks again Bill, we owe you one.

Now, as far as the mod. Believe it or not we have a LOT done. This mod is insane amount of work. Were working on packing all the stuff into this beast. The case is a bit smaller than I had hoped.
When I managed to get done today was the plexi mount for the 2 Kingston SSD's.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1130640.jpg
The center hole is for the light blue LED were putting in it. The SSD's will mount on top of the plexy, which in turn mounts on a piece of aluminum. And THAT then mounts on the side of the 5.25 bays, inside the case. You'll see soon. We can't start assembling until it's painted and we can't paint it until all the cuts are done. You know how it goes.

We also have the front ready for paint. That took some work. I hate to keep saying "wait and see" as I know the mod does not look very good so far. I really have not given you guys much to look at. But when it starts to come together, it will be done fast. It's the manufacturing of parts, mounts etc that's taking so long. So please, bear with me a bit.
Till next time...

[DeviceUnknown]

Well, this update took longer than I anticipated. Using a new kind of paint, that requires a long drying time, but it's SUPER durable, almost as strong as powder coat.
Also, we have a new sponsor. Big thanks to Glenn and Quiet PC http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/qpclogo-gb.gif
They came to my rescue and provided me with the Aerocool Touch 2000 Controller, 7 Fans, and the Blu-Ray player we're putting in the mod. Should see these in soon.

So, as I said, the case is painted. Well, just the metal. Still modding the plastic parts at the moment.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1135640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1136640.jpg

I got the EKWB radiator finished and mounted in the case. I love this radiator. Huge and very well built. Should cool 3 video cards just fine.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1141640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1137640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1138640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1139640.jpg
I polished the sides of the radiator so it would match the aluminum throughout the mod. Seems to match perfectly.

Now you can see the square hole on the right side. That will be housing the Blu-Ray player. I am exposing the inside of the player, showing the disc. Should add a nice color show when spinning.
Starting to get exciting, things coming together now. Hopefully soon we'll have a motherboard, processor and video cards to show you. We're still not set on which ones to get yet.

I can not end a update without some sort of teaser! Who shot JR?
ok well gander at this..
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1134640.jpg
Any guesses on what that's for? :)

Well see you guys soon. Alot is happening now!

[xr4man]

it's the cam drive for the 1/4 scale engine you're going to use to power this thing.

you have left me really intrigued now. i want to know what that cam is going to be driving.

[Luke122]

I bet the cam is going to move the scorpion somehow.. make it look like he's walking perhaps?

Very cool looking build so far!

[OvRiDe]

Awesome build so far!


I bet the cam is going to move the scorpion somehow.. make it look like he's walking perhaps?

I think Luke might be on to it! I was at a loss.

[SXRguyinMA]

I bet the cam is going to move the scorpion somehow.. make it look like he's walking perhaps?

exactly what I was thinking :D

[DeviceUnknown]

Here we go again! We have started assembling this monster. Still a lot of work to do but we're getting their. Were still trying to find mobo/processor/graphics cards but I imagine we'll find them eventually.

On with the pictures!!!

http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3573640.jpg
This is the left side. I have not even started on the left door yet. I still need to source the CPU to decide which way I need to do it. But it's a pretty look anyway.

http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3570640.jpg
That's the hinges I put in to hold the left door. It will be a giant reservoir so it needed support.

http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3565640.jpg
The right side as it stands now. Look at them gorgeous SSD's!
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3567640.jpg

http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3561640.jpg
The power supply isn't mounted in their yet, I just put it in their so you could get an idea of the massive size of Thermaltakes 1500W PSU!
The CD-Rom is in their, with a window so you can watch it spin :)
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3556640.jpg

http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3560640.jpg
I polished the sides of EK's big ass radiator. If this thing does not cool 3 video cards, nothing will!

Here are some misc shots, hope you enjoy it.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3557640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3579640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3577640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3576640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3575640.jpg
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_3573640.jpg

Well that's it for now. Let me know what you guys think. I'll be sure to let yall know when we source the other parts.

[DeviceUnknown]

Things have been going slow guys, for that I am sorry. But the company has been slave driving me!
So here we go with a small update.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1464_640x480.jpg The top with the lights. really cool effect. Yes I know some bolts are missing, I ran out lol
Closer shot http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1463_640x480.jpg

I love this part, it's my favorite. Since the mod is for Thermaltake, I figured I would.. well.. hook'em up!
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1461_640x480.jpg

Now here is the front.
http://i1105.photobucket.com/albums/h358/DeviceUnknown/Scorpio/IMG_1460_640x480.jpg

I hacked the heck out of it, but i wanted it to look different. I still have a couple things to add to it, plus the top isn't on. So obviously that's not the finished product, but a good idea.

So umm yeah, small update. Hopefully soon we'll start adding hardware. And don't forget. Check out http;//www.deviceunknown.com for new modding reviews. We have a contest coming up for a free SSD anytime now. so get signed up today.

[DonT-FeaR]

really loving this case, pity i didnt check it out before i started my mod, the door sliders are almost identical, sorry for the slight copying mate :)

[DeviceUnknown]

really loving this case, pity i didnt check it out before i started my mod, the door sliders are almost identical, sorry for the slight copying mate :)

Bro, don't even sweat it. Our company is all about giving modders ideas on products tools, materials, anything, to create mods. Si feel free to copy anything. We hold no intellectual rights to our designs. Some of the things we do in our mods we got from other modders as well. Plus there is very little chance that anyone has done something truly unique in modding these days. It's rare, but just sometimes you see them.
What makes modding beautiful, unique and special is the modder themselves. The skill they have in creating the mod and their presentation. As you are well aware of, modding is an extension of us, the creator. That's why we create. It's in our genes. We do not have to reinvent the wheel for our mods to be unique.

Sorry for the long reply :)

[TheMainMan]

It's good to see that kind of attitude about ideas. I saw those rails and thought that would be an awesome, and easy to source parts for, mod. Far too often people don't take it as a compliment when someone integrates a part of their design into a mod. My side panel fits like crap, so I might use the sliders horizontally.

[DeviceUnknown]

It's good to see that kind of attitude about ideas. I saw those rails and thought that would be an awesome, and easy to source parts for, mod. Far too often people don't take it as a compliment when someone integrates a part of their design into a mod. My side panel fits like crap, so I might use the sliders horizontally.

Make sure you get the right sliders. most sliders outthere are only 70/30
So check that they have 100% extension, which requires 3 rails. I was unable to find any at Home Depot, Lowes etc .I had to order online to make sure i didn't get the normal 1.5" thick ones. I was about to find nice and thin ones for this project for like 25 bucks. Some rails offer over extension also.

[DeviceUnknown]

Hey guys, so sorry for the photobucket issues. We have since moved all our photos to our own server.
you can view the ful worklog here.
http://deviceunknown.com/forums/viewtopic.php?f=3&t=3
We may or may not post updates in other forums in the future.