B1Gtime
11-02-2011, 12:57 PM
Just built a new rig for bf3:
Core i5 2500k @ 4.4 ghz
P67 EXTREME4 Gen 3 Mobo
Xigament LOKI CPU Cooler
Radeon 5850 @ 870 Mhz(temporary,580 will replace this)
G.Skill Rip Jaws 1600mhz(8GB)
NZXT Phantom Case (Black/Orange)
i want to push father than 4.4 which ik is possible,or if u think i should stay at 4.4ghz
BIOS Settings:
Internal PLL Overvoltage: Enabled
Intel SpeedStep Technology: Enabled
Intel Turbo Boost Technology: Enabled
PCH Voltage: 1.012v
CPU PLL Voltage: 1.857v
VTT Voltage: 1.116v
VCCSA Voltage: 0.925v
Under Advanced...
CPU Configuration...
c1,c3 disabled
Turbo Boost Power Limit: Manual
Short Duration Power Limit: 250
Long Duration Power Limit: 200
4.5 i crash in 3D mark 11.
What could i change to get to 4.6 stable..ill be hapy with 4.6
Core i5 2500k @ 4.4 ghz
P67 EXTREME4 Gen 3 Mobo
Xigament LOKI CPU Cooler
Radeon 5850 @ 870 Mhz(temporary,580 will replace this)
G.Skill Rip Jaws 1600mhz(8GB)
NZXT Phantom Case (Black/Orange)
i want to push father than 4.4 which ik is possible,or if u think i should stay at 4.4ghz
BIOS Settings:
Internal PLL Overvoltage: Enabled
Intel SpeedStep Technology: Enabled
Intel Turbo Boost Technology: Enabled
PCH Voltage: 1.012v
CPU PLL Voltage: 1.857v
VTT Voltage: 1.116v
VCCSA Voltage: 0.925v
Under Advanced...
CPU Configuration...
c1,c3 disabled
Turbo Boost Power Limit: Manual
Short Duration Power Limit: 250
Long Duration Power Limit: 200
4.5 i crash in 3D mark 11.
What could i change to get to 4.6 stable..ill be hapy with 4.6