SteamPlanet

[ArgOs]

SteamPlanet

I present to you the new project, is a kind of steampunk:) I show you some pictures of how it should be :P
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/th_steamplanet-lateral2.jpg (http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/steamplanet-lateral2.jpg)

http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/th_steamplanet-frontal.jpg (http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/steamplanet-frontal.jpg)

Although honestly I like the work I did for the other site, based on this, but with more details as it was only designs.

http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/th_NMC2011-lateral.jpg (http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/NMC2011-lateral.jpg)

http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/th_NMC2011-final.jpg (http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/NMC2011-final.jpg)

So I start the project "SteamPlanet" as any new project shall begin showing the case received and the dismantled the same
Luckily I do not do to review, and that someone would go wrong

http://argosmod.com/Miniaturas/SP01.jpg (http://argosmod.com/Mimod/SP01.jpg)

http://argosmod.com/Miniaturas/SP04.jpg (http://argosmod.com/Mimod/SP04.jpg)

http://argosmod.com/Miniaturas/SP06.jpg (http://argosmod.com/Mimod/SP06.jpg)

http://argosmod.com/Miniaturas/SP07.jpg (http://argosmod.com/Mimod/SP07.jpg)

http://argosmod.com/Miniaturas/SP08.jpg (http://argosmod.com/Mimod/SP08.jpg)

http://argosmod.com/Miniaturas/SP11.jpg (http://argosmod.com/Mimod/SP11.jpg)


Comparison between the old and new foot, so the case will raise more than 5mm.

http://argosmod.com/Miniaturas/SP10.jpg (http://argosmod.com/Mimod/SP10.jpg)

Presentation of the chimneys

http://argosmod.com/Miniaturas/SP09.jpg (http://argosmod.com/Mimod/SP09.jpg)

I have the handle that is the same design and create the new screw to the side (with a butterfly nut and a screw), but according to the tematic.

http://argosmod.com/Miniaturas/SP12.jpg (http://argosmod.com/Mimod/SP12.jpg)

http://argosmod.com/Miniaturas/SP13.jpg (http://argosmod.com/Mimod/SP13.jpg)

For now is all, little by little there will be more progress.

[Fuganater]

IDK how I missed this but I want to see more!!!!!!!!!!

[xr4man]

sooner or later i'm gonna do something steampunk, but for now, i'll just drool over reading about this.

the design looks better than anything i'd come up with.

[d_stilgar]

Very nice. Can't wait to see more.

[AmEv]

ArgOs' profile says they were on today 4 hours ago....

[ArgOs]

thanks guys :up:

I begin with the creation of steam chimneys, these I will make with a 110mm PVC pipe, and these were placed on a 4mm fibrofacil wood, to which I will cut off for the placement of them. To perform the chimneys decorated with the same pipe.

http://argosmod.com/Miniaturas/SP16.jpg (http://argosmod.com/Mimod/SP16.jpg)

http://argosmod.com/Miniaturas/SP18.jpg (http://argosmod.com/Mimod/SP18.jpg)

http://argosmod.com/Miniaturas/SP17.jpg (http://argosmod.com/Mimod/SP17.jpg)

http://argosmod.com/Miniaturas/SP19.jpg (http://argosmod.com/Mimod/SP19.jpg)

I continue to design the paper real size to show how they will be different elements, there will be slight changes to the original design because of the measures of various elements such as the dome is larger than the drawing, but will allow a better view interior.

http://argosmod.com/Miniaturas/SP14.jpg (http://argosmod.com/Mimod/SP14.jpg)

[TheGreatSatan]

sooner or later i'm gonna do something steampunk, but for now, i'll just drool over reading about this.

the design looks better than anything i'd come up with.

I've been slowly throwing it all together. I'll probably do one by the end of the year

[ArgOs]

The steampunk is a little complicated, so many details that have to put them, but it is beautiful when it is finished.

[xr4man]

yeah exactly.

they need lots of detail work, but at the same time, you can't go overboard or it looks just thrown together. there's a line between nice steampunk and just a bunch of copper and brass.

[ArgOs]

more updates, the creation of the gears.
http://argosmod.com/Miniaturas/SP20.jpg (http://argosmod.com/Mimod/SP20.jpg)
http://argosmod.com/Miniaturas/SP21.jpg (http://argosmod.com/Mimod/SP21.jpg)
http://argosmod.com/Miniaturas/SP22.jpg (http://argosmod.com/Mimod/SP22.jpg)
http://argosmod.com/Miniaturas/SP23.jpg (http://argosmod.com/Mimod/SP23.jpg)
http://argosmod.com/Miniaturas/SP25.jpg (http://argosmod.com/Mimod/SP25.jpg)
http://argosmod.com/Miniaturas/SP26.jpg (http://argosmod.com/Mimod/SP26.jpg)

[ArgOs]

I'm half disappeared but working, the problem that each piece takes several hours, cutting, sanding, caulking, painting, sanding, painting, etc..
I cut the two side panels, one for the dome and the door and the other for SteamPlanet logo.
http://argosmod.com/Miniaturas/SP27.jpg (http://argosmod.com/Mimod/SP27.jpg)
http://argosmod.com/Miniaturas/SP28.jpg (http://argosmod.com/Mimod/SP28.jpg)
http://argosmod.com/Miniaturas/SP29.jpg (http://argosmod.com/Mimod/SP29.jpg)

SteamPlanet's Logo
http://argosmod.com/Miniaturas/SP30.jpg (http://argosmod.com/Mimod/SP30.jpg)

door and dome
http://argosmod.com/Miniaturas/SP31.jpg (http://argosmod.com/Mimod/SP31.jpg)
http://argosmod.com/Miniaturas/SP32.jpg (http://argosmod.com/Mimod/SP32.jpg)
http://argosmod.com/Miniaturas/SP33.jpg (http://argosmod.com/Mimod/SP33.jpg)
http://argosmod.com/Miniaturas/SP34.jpg (http://argosmod.com/Mimod/SP34.jpg)

[d_stilgar]

Hehehe.

http://argosmod.com/Miniaturas/SP28.jpg

[AmEv]

D!

I didn't know you had that kind of mind!

[Fuganater]

Wow that logo look amazing!

[d_stilgar]

D!

I didn't know you had that kind of mind!

I generally don't, but I mean, I'll call an orange an orange and a banana a banana. It's certainly not a stretch to see it.

[ArgOs]

yeah, sure :banana:

[ArgOs]

some progress
I make a detail to a main gear
http://argosmod.com/Miniaturas/SP35.jpg (http://argosmod.com/Mimod/SP35.jpg)
http://argosmod.com/Miniaturas/SP36.jpg (http://argosmod.com/Mimod/SP36.jpg)

I covered the plate that was cut
http://argosmod.com/Miniaturas/SP39.jpg (http://argosmod.com/Mimod/SP39.jpg)
http://argosmod.com/Miniaturas/SP42.jpg (http://argosmod.com/Mimod/SP42.jpg)

then the putty, sand, putty and then I went back to sand
http://argosmod.com/Miniaturas/SP43.jpg (http://argosmod.com/Mimod/SP43.jpg)
http://argosmod.com/Miniaturas/SP45.jpg (http://argosmod.com/Mimod/SP45.jpg)
http://argosmod.com/Miniaturas/SP46.jpg (http://argosmod.com/Mimod/SP46.jpg)

Then I continued with the creation of the chimney
http://argosmod.com/Miniaturas/SP49.jpg (http://argosmod.com/Mimod/SP49.jpg)
http://argosmod.com/Miniaturas/SP50.jpg (http://argosmod.com/Mimod/SP50.jpg)
http://argosmod.com/Miniaturas/SP53.jpg (http://argosmod.com/Mimod/SP53.jpg)

I joined the bays of the front and place a wood to where the fan.
http://argosmod.com/Miniaturas/SP57.jpg (http://argosmod.com/Mimod/SP57.jpg)
http://argosmod.com/Miniaturas/SP58.jpg (http://argosmod.com/Mimod/SP58.jpg)
http://argosmod.com/Miniaturas/SP55.jpg (http://argosmod.com/Mimod/SP55.jpg)

and finally paint the brass .
http://argosmod.com/Miniaturas/SP59.jpg (http://argosmod.com/Mimod/SP59.jpg)

It's all for now, is not much but each piece takes many hours of work, thanks.:up:

[ArgOs]

I continue with the side, which was painted after the repair and followed with the design of the logo, which is placed behind an acrylic and decorative screws, as also painting the frame and gears, the poster of the asupiciantes, which was drawn with fire, the shield of ArgOs, which is composed of 5 pieces, and is more than 90% over the side.
http://argosmod.com/Miniaturas/SP47.jpg (http://argosmod.com/Mimod/SP47.jpg)

Poster sponsors
http://argosmod.com/Miniaturas/SP61.jpg (http://argosmod.com/Mimod/SP61.jpg)
http://argosmod.com/Miniaturas/SP62.jpg (http://argosmod.com/Mimod/SP62.jpg)

Shield of ArgOs
http://argosmod.com/Miniaturas/SP71.jpg (http://argosmod.com/Mimod/SP71.jpg)
http://argosmod.com/Miniaturas/SP72.jpg (http://argosmod.com/Mimod/SP72.jpg)
http://argosmod.com/Miniaturas/SP73.jpg (http://argosmod.com/Mimod/SP73.jpg)
http://argosmod.com/Miniaturas/SP74.jpg (http://argosmod.com/Mimod/SP74.jpg)

Full side (so far) I paint it black the acrylic and before you ask, why I cut it and then I put a acrylic paint it black and its not as if I had done nothing, after so much work?, simple, it will be illuminated from behind.

http://argosmod.com/Miniaturas/SP65.jpg (http://argosmod.com/Mimod/SP65.jpg)

[ArgOs]

In this time I spend to the front, the logo of Sentey transorfm chrome to bronze, because chrome is not used in the Steam (usually), as to the buttons on the reader and digital commands were painted copper .
http://argosmod.com/Miniaturas/SP63.jpg (http://argosmod.com/Mimod/SP63.jpg)

http://argosmod.com/Miniaturas/SP64.jpg (http://argosmod.com/Mimod/SP64.jpg)

I began cover some parts of the front with wood and I painted bronze bottom.

http://argosmod.com/Miniaturas/SP67.jpg (http://argosmod.com/Mimod/SP67.jpg)

http://argosmod.com/Miniaturas/SP69.jpg (http://argosmod.com/Mimod/SP69.jpg)

http://argosmod.com/Miniaturas/SP70.jpg (http://argosmod.com/Mimod/SP70.jpg)

Thank you very much, this weekend there will be more progress.

[ArgOs]

One side is practically finished, but I can not get small gears for the world logo
http://argosmod.com/Miniaturas/SP87.jpg (http://argosmod.com/Mimod/SP87.jpg)

Like the front with almost every detail, I put the screws and some decorations as the design.

http://argosmod.com/Miniaturas/SP75.jpg (http://argosmod.com/Mimod/SP75.jpg)
http://argosmod.com/Miniaturas/SP76.jpg (http://argosmod.com/Mimod/SP76.jpg)
http://argosmod.com/Miniaturas/SP77.jpg (http://argosmod.com/Mimod/SP77.jpg)
http://argosmod.com/Miniaturas/SP78.jpg (http://argosmod.com/Mimod/SP78.jpg)

soon the other side and the inside

[TheGreatSatan]

Like the wood

[ArgOs]

thanks
Now some new details, fan controller, power and reset button.
http://argosmod.com/Miniaturas/SP60.jpg (http://argosmod.com/Mimod/SP60.jpg)
http://argosmod.com/Miniaturas/SP85.jpg (http://argosmod.com/Mimod/SP85.jpg)
front fan
http://argosmod.com/Miniaturas/SP79.jpg (http://argosmod.com/Mimod/SP79.jpg)
http://argosmod.com/Miniaturas/SP82.jpg (http://argosmod.com/Mimod/SP82.jpg)
http://argosmod.com/Miniaturas/SP83.jpg (http://argosmod.com/Mimod/SP83.jpg)

[AmEv]

http://argosmod.com/Miniaturas/SP82.jpg (http://argosmod.com/Mimod/SP82.jpg)


Bringing new meaning to "having an Easter egg in your case" :whistler:

[ArgOs]

Bringing new meaning to "having an Easter egg in your case" :whistler:
ha ha ha ha here is the finished Easter egg.
the fan is now ready to place it front and I'll put a little rubber to isolate any vibration.
http://argosmod.com/Miniaturas/SP89.jpg (http://argosmod.com/Mimod/SP89.jpg)
I also made the protective grille with copper wire.
http://argosmod.com/Miniaturas/SP86.jpg (http://argosmod.com/Mimod/SP86.jpg)
http://argosmod.com/Miniaturas/SP91.jpg (http://argosmod.com/Mimod/SP91.jpg)
http://argosmod.com/Miniaturas/SP94.jpg (http://argosmod.com/Mimod/SP94.jpg)
Some details in the union of the bays.
http://argosmod.com/Miniaturas/SP93.jpg (http://argosmod.com/Mimod/SP93.jpg)
http://argosmod.com/Miniaturas/SP92.jpg (http://argosmod.com/Mimod/SP92.jpg)
So far is
http://argosmod.com/Miniaturas/SP96.jpg (http://argosmod.com/Mimod/SP96.jpg)
Thank you very much.

[xr4man]

ok, this whole thing is cool, but that fan grille just put it all over the top!

[ArgOs]

yes, the fan sends air directly to CPU and memory.

[msmrx57]

ok, this whole thing is cool, but that fan grille just put it all over the top!

Absolutely agree. :up: I thought the knobs were great, then saw that fan guard. I love the feel of this.

[d_stilgar]

This is going really well. I always have to stand back and wait whenever I see a steampunk mod because it could either be awesome, or just a bunch of gears glued onto things. This is on the awesome side, especially the brazed fan grill.

[ArgOs]

thank you msmrx57

This is going really well. I always have to stand back and wait whenever I see a steampunk mod because it could either be awesome, or just a bunch of gears glued onto things. This is on the awesome side, especially the brazed fan grill.
thank you very much, I hope that you continue liking the updates and the final work.

[ArgOs]

Thanks guys: D
Now I'll show you how is the top, where the chimneys are almost ready.
First I painted the brass parts
http://argosmod.com/Miniaturas/SP100.jpg (http://argosmod.com/Mimod/SP100.jpg)
I made ​​the frame for supporting the chimneys.

http://argosmod.com/Miniaturas/SP101.jpg (http://argosmod.com/Mimod/SP101.jpg)
http://argosmod.com/Miniaturas/SP102.jpg (http://argosmod.com/Mimod/SP102.jpg)
http://argosmod.com/Miniaturas/SP103.jpg (http://argosmod.com/Mimod/SP103.jpg)

After painting part of the chimney of black, pipes were connected.
http://argosmod.com/Miniaturas/SP104.jpg (http://argosmod.com/Mimod/SP104.jpg)
http://argosmod.com/Miniaturas/SP105.jpg (http://argosmod.com/Mimod/SP105.jpg)
http://argosmod.com/Miniaturas/SP106.jpg (http://argosmod.com/Mimod/SP106.jpg)

soon the another side

[xr4man]

simply awesome!

[jdbnsn]

This mod has great style, love the way you designed the accents.

[ArgOs]

thanks guys for supporting:up:
Now, the other side, there were some air intakes covered with metal mesh, also you can see the inside of the door frame.
http://argosmod.com/Miniaturas/SP108.jpg (http://argosmod.com/Mimod/SP108.jpg)

More pieces were constructed according to the thematic.
http://argosmod.com/Miniaturas/SP97.jpg (http://argosmod.com/Mimod/SP97.jpg)
http://argosmod.com/Miniaturas/SP107.jpg (http://argosmod.com/Mimod/SP107.jpg)

I put everything in place, test only, the side will be sanded and painted.
http://argosmod.com/Miniaturas/SP98.jpg (http://argosmod.com/Mimod/SP98.jpg)
http://argosmod.com/Miniaturas/SP99.jpg (http://argosmod.com/Mimod/SP99.jpg)

Barriers separate and sanded, then painted.
http://argosmod.com/Miniaturas/SP05.jpg (http://argosmod.com/Mimod/SP05.jpg)
http://argosmod.com/Miniaturas/SP116.jpg (http://argosmod.com/Mimod/SP116.jpg)
http://argosmod.com/Miniaturas/SP117.jpg (http://argosmod.com/Mimod/SP117.jpg)

The brackets I made ​​with metal mesh, I gave him a white background then painted bronze.
http://argosmod.com/Miniaturas/SP109.jpg (http://argosmod.com/Mimod/SP109.jpg)
http://argosmod.com/Miniaturas/SP110.jpg (http://argosmod.com/Mimod/SP110.jpg)
http://argosmod.com/Miniaturas/SP111.jpg (http://argosmod.com/Mimod/SP111.jpg)

The end, to compare.
http://argosmod.com/Miniaturas/SP112.jpg (http://argosmod.com/Mimod/SP112.jpg)
Thanks

[d_stilgar]

This is looking better and better every time I see it. I also saw that this is in the running on bit-tech for mod of the month. Congrats!

[ArgOs]

thank you very much, the bit-tech MOTM I see it very difficult, the first takes me big difference.

[ArgOs]

Some details, before the final photos.
process of creating the supports for the dome.
http://argosmod.com/Miniaturas/SP130.jpg (http://argosmod.com/Mimod/SP130.jpg)

The liquid level
http://argosmod.com/Miniaturas/SP113.jpg (http://argosmod.com/Mimod/SP113.jpg)
http://argosmod.com/Miniaturas/SP118.jpg (http://argosmod.com/Mimod/SP118.jpg)

modify a bracket screws
http://argosmod.com/Miniaturas/SP123.jpg (http://argosmod.com/Mimod/SP123.jpg)
http://argosmod.com/Miniaturas/SP120.jpg (http://argosmod.com/Mimod/SP120.jpg)

the tube was made with a plastic bottle and the liquid mixture of glue and coolant.
http://argosmod.com/Miniaturas/SP114.jpg (http://argosmod.com/Mimod/SP114.jpg)
http://argosmod.com/Miniaturas/SP129.jpg (http://argosmod.com/Mimod/SP129.jpg)
voila.
http://argosmod.com/Miniaturas/SP121.jpg (http://argosmod.com/Mimod/SP121.jpg)

The door lock
http://argosmod.com/Miniaturas/SP124.jpg (http://argosmod.com/Mimod/SP124.jpg)
http://argosmod.com/Miniaturas/SP125.jpg (http://argosmod.com/Mimod/SP125.jpg)
http://argosmod.com/Miniaturas/SP126.jpg (http://argosmod.com/Mimod/SP126.jpg)

detailed work then welded to the lock
http://argosmod.com/Miniaturas/SP127.jpg (http://argosmod.com/Mimod/SP127.jpg)
http://argosmod.com/Miniaturas/SP128.jpg (http://argosmod.com/Mimod/SP128.jpg)

Change the PSU and make some changes to this more in keeping with the modding
http://argosmod.com/Miniaturas/SP132.jpg (http://argosmod.com/Mimod/SP132.jpg)
http://argosmod.com/Miniaturas/SP133.jpg (http://argosmod.com/Mimod/SP133.jpg)

http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP362Custom.jpg
Thanks!!!

[AmEv]

Where's the eyeball reinstallation kit???

[ArgOs]

some pictures nearly the end

http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP406Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP405Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP399Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP396Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP389Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP386Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP383Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP379Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP375Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP370Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP369Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP366Custom.jpg
http://i1123.photobucket.com/albums/l541/ArgOsMod/Steampunk/SP363Custom.jpg
this is old school modding is not buying :P
Thank you very much everyone.

[Fuganater]

Awesome job!

[ArgOs]

Awesome job!

Thank you Fuganater:up:
Some updates, I put the handles were missing, and I think a pressure gauge to control the vapor pressure, where it says RPM, PSI should read, I was reading something else when I create it :lol:.
http://argosmod.com/Miniaturas/SP134.jpg (http://argosmod.com/Mimod/SP134.jpg)
http://argosmod.com/Miniaturas/SP136.jpg (http://argosmod.com/Mimod/SP136.jpg)
http://argosmod.com/Miniaturas/SP137.jpg (http://argosmod.com/Mimod/SP137.jpg)

detail of how the dome is placed
http://argosmod.com/Miniaturas/SP138.jpg (http://argosmod.com/Mimod/SP138.jpg)
http://argosmod.com/Miniaturas/SP139.jpg (http://argosmod.com/Mimod/SP139.jpg)

and so ended.
http://argosmod.com/Miniaturas/SP141.jpg (http://argosmod.com/Mimod/SP141.jpg)

I covered the back with a metal mesh that was open.
http://argosmod.com/Miniaturas/SP146.jpg (http://argosmod.com/Mimod/SP146.jpg)

I decided to extend the front buttons to be more practical to use.
http://argosmod.com/Miniaturas/SP142.jpg (http://argosmod.com/Mimod/SP142.jpg)
http://argosmod.com/Miniaturas/SP143.jpg (http://argosmod.com/Mimod/SP143.jpg)
As you will see are just little things that go unnoticed but that make the detail of a complete work, thanks.:D

[licenseless]

i actually liked it... i thought at first, oh no steam punk is getting way to over done... but this is nice man

for reals... kudos man

[ArgOs]

i actually liked it... i thought at first, oh no steam punk is getting way to over done... but this is nice man

for reals... kudos man
Thanks, I'm glad that you liked to you,:up:
finally, the final photos. :D

http://argosmod.com/Miniaturas/SP152.jpg (http://argosmod.com/Mimod/SP152.jpg)
http://argosmod.com/Miniaturas/SP159.jpg (http://argosmod.com/Mimod/SP159.jpg)
http://argosmod.com/Miniaturas/SP164.jpg (http://argosmod.com/Mimod/SP164.jpg)
http://argosmod.com/Miniaturas/SP180.jpg (http://argosmod.com/Mimod/SP180.jpg)
http://argosmod.com/Miniaturas/SP157.jpg (http://argosmod.com/Mimod/SP157.jpg)
http://argosmod.com/Miniaturas/SP156.jpg (http://argosmod.com/Mimod/SP156.jpg)
http://argosmod.com/Miniaturas/SP160.jpg (http://argosmod.com/Mimod/SP160.jpg)
http://argosmod.com/Miniaturas/SP162.jpg (http://argosmod.com/Mimod/SP162.jpg)
http://argosmod.com/Miniaturas/SP161.jpg (http://argosmod.com/Mimod/SP161.jpg)
http://argosmod.com/Miniaturas/SP168.jpg (http://argosmod.com/Mimod/SP168.jpg)

I hope that you liked the modding or at least appreciate the work done.
Total Thanks!!:banana:

[TLHarrell]

Love it. Great style and well executed.

[ArgOs]

Love it. Great style and well executed.

thank you very much :up:

[ArgOs]

thanks for the award :up:
http://www.thebestcasescenario.com/forum/images/medals/completedlarge.gif

[mDust]

I don't like most steampunk mods but this is pretty cool.

Not to be too picky, but there's a sticker on the PSU fan. If you were to remove or cover it, this would be absolutely perfect!

Great job on this one

[ArgOs]

I don't like most steampunk mods but this is pretty cool.

Not to be too picky, but there's a sticker on the PSU fan. If you were to remove or cover it, this would be absolutely perfect!

Great job on this one

you're right, I agree with you, when I can, take it off.
Thanks

[diluzio91]

After being away for a while... i feel like i have to say "well that escalated quickly" Looks beautiful!!

[ArgOs]

After being away for a while... i feel like i have to say "well that escalated quickly" Looks beautiful!!

thank you very much, more updates soon.

[DynamoNED]

Been off the forums for a while, but wow, this looks sweet! Steampunk tends to get a bit overwrought sometimes, but this is classy. Great work!

[Cale_Hagan]

Been off the forums for a while, but wow, this looks sweet! Steampunk tends to get a bit overwrought sometimes, but this is classy. Great work!

Welcome back! :banana:

[ArgOs]

Thank you very much, Unfortunately I have not got much time this year I am dedicating to study. You get ready for 2013.:up:

[Twigsoffury]

Pulled the rabbit out of the hat again carl, your attention to detail is always superb and something i envy a little more with each mod.

+1 dude...+1 all day