View Full Version : CaseLabs MAGNUM M8K
Today the start of a new build with a super case: the CaseLabs Magnum M8 Labs
Sponsored by...... CaseLabs, Lamptron, Highflow, Coolermaster and EKWB
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ekwb.png (http://www.ekwb.com/)
First my thanks goes out to Jim (CaseLabs) for providing this beautiful case
Received this beautiful gift on my birthday
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06851.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06850.jpg
Offcourse unwrapping it right away
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06852.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06855.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06854.jpg
Once out of the box
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06856.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06858.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06872.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06873.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06874.jpg
One of the finest cases I've ever seen, quality is superb
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06867.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06868.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06870.jpg
And with an XL window on the right side
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06876.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06877.jpg
And also on the left side
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06878.jpg
After admiring the outside for some time, the inside
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06859.jpg
With 3 HDD cages
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06864.jpg
Attached with screws and rubbers
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06961.jpg
Pins to hold everything in place
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06964.jpg
With two vertical accessory mounts
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06860.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06861.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06862.jpg
Once everything is removed there is a lot of space for a nice WC setup
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06900.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06901.jpg
Other side also perfect quality
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06879.jpg
Place at the bottom for a 360 radiator
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06881.jpg
Passages for tubes and / or wiring
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06882.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06890.jpg
8 Slots is enough
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06885.jpg
And enough space for various purposes
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06884.jpg
Also with a Horizontal Accessory Mount
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06887.jpg
And included 2x Lamptron switches which also perfectly finished
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06883.jpg
Already sleeved
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06960.jpg
The windows also very nice and simple mounted
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06905.jpg
Nothing pasted or with bent strips, but with nuts
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06907.jpg
So always easy to exchange if necessary. After damage or any other acrylic color replacing. Clamping mechanism is also well thought
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06908.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06912.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06910.jpg
This is also applied to the front and top panel, which is also removable
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06914.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06897.jpg
Space for 3x 120mm fans
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06896.jpg
But that's not all. There was another package
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06917.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06847.jpg
Quickly unwrapping it again
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06918.jpg
And it is the extended pedestal, for all your radiators and other stuff
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06920.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06924.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06920.jpg
At the back holes for 2x 140mm fan
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06926.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06931.jpg
So much space inside, but I choose for a bracket for 2x 360 radiator
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06928.jpg
The front also has a removable panel. Always nice to mod
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06929.jpg
So the extended pedastal. Lots of extra space, a real nice addition
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06932.jpg
Once installed everything, I was shocked
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06935.jpg
Really big
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06946.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06938.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06950.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06953.jpg
Some more pictures of the beautiful extra addition
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06939.jpg
So a new build with a superb case from:
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/DSC06944.jpg
Fuganater
03-18-2012, 07:03 AM
can't wait!
...show-off....:whistler:
can't wait!
Thanks mate ;)
...show-off....:whistler:
:D
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
Before we even get to modding, an overview of all the accessories
One Standard HDD Cage (http://www.caselabs-store.com/standard-hdd-cage-assy/) is coming with the case
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06965.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06970.jpg
Ordered two more
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06967.jpg
As I mentioned earlier comes with rubber bands for installing at the front with screws
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06969.jpg
With gaskets and mounting bolts for the HDDs
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06995.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06999.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06998.jpg
The SSD Mounting Kit (http://www.caselabs-store.com/ssd-mounting-kit/)
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC07006.jpg
Two Vertical Accessory Mount (http://www.caselabs-store.com/vertical-accessory-mount/)
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06972.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06975.jpg
And the Horizontal Accessory Mount (http://www.caselabs-store.com/horizontal-accessory-mount/)
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06977.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06974.jpg
These will be very useful
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06978.jpg
A PSU Support Bracket (http://www.caselabs-store.com/psu-support-bracket/) For heavy powersupplies
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06990.jpg
A lot of Flex-Bay Device Mount (http://www.caselabs-store.com/flex-bay-device-mount-adjustable/)
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06993.jpg
Two x 360 Radiator Side Mount (http://www.caselabs-store.com/360-radiator-side-mount/) For in the pedestal
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC07008.jpg
And a Bottom Accessory Mount (http://www.caselabs-store.com/bottom-accessory-mount/)
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06985.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06988.jpg
To replace the standard bottom covers, consists of three sizes (picture is the longest)
A few HDD Opening Cover Plates (http://www.caselabs-store.com/hdd-opening-cover-plate/) Replacement cover plates for the HDD openings on the PSU side
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC07000.jpg
A Large Attachment Plate (http://www.caselabs-store.com/large-attachment-plate/) for various purposes such as installing reservoirs or miscellaneous
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06980.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06981.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC06982.jpg
And finally, all the spare parts comes with the case
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC07003.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC07001.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC07002.jpg
Of course I also had time to do some modding. A little teaser ;)
http://i759.photobucket.com/albums/xx233/kier1976/case1/DSC07033.jpg
TLHarrell
03-18-2012, 05:12 PM
This is a really nice case. Can't wait to see what you do with it. Care to give us some hints on the overall design?
Fuganater
03-18-2012, 06:18 PM
Hes cutting it up.... Makes me want to cry ;(
TLHarrell
03-18-2012, 08:33 PM
It's all for the better, I'm sure.
This is a really nice case. Can't wait to see what you do with it. Care to give us some hints on the overall design?
Sorry dont know yet :D Always modding without planning
Hes cutting it up.... Makes me want to cry ;(
Lol...sorry :twisted:
It's all for the better, I'm sure.
:up: Yes ...I hope so lol
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
Update!!!
Ok, my friends Its modding time :)
Beneath the top cover there are holes for 120mm fans, which I dont need.
These will disappear, because I want a good view from all sides
So taped and marked
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07010.jpg
Always an exciting moment...the first cut-out
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07013.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07017.jpg
I also slightly modified the recesses in the bottom of the case. There were also holes for 120mm fans (3x) on both sides
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07015.jpg
Between the pedestal and the case I have inserted an acrylic plate, which makes the separation between the two
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07018.jpg
Later i am gonna use fill ports for the tubes and/ or acrylic pipes
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07020.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07022.jpg
In the top cover I also made openings with the same size as the recesses underneath
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07023.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07025.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07028.jpg
Piece of acrylic for the top window
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07030.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07031.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07033.jpg
For the front I also did some cutting, but first marking
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07037.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07038.jpg
The same dimensions as the 5.25 bays
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07039.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07041.jpg
Piece of acrylic behind
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07043.jpg
Going to use the exciting fanholes because of the 360 rad behind it later
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07044.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07061.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07046.jpg
To keep the color combination (black / silver) I have cut a piece of aluminum with the fanholes. And a hole for the switch. This is further extended to the right with displays, and more switches in the middle.
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07062.jpg
What's going to look like this
http://i759.photobucket.com/albums/xx233/kier1976/case2/DSC07054.jpg
More to come ;)
Aldersan
03-22-2012, 04:18 PM
Gunna look great!
diluzio91
03-23-2012, 10:33 AM
Subbed!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ekwb.png (http://www.ekwb.com/)
The story continues......With some nice hardware and more;)
The hardware is a nice Gigabyte mobo: The Z68X-UD4-B3
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07494.jpg
And a great CPU: The i7-2600K
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07493.jpg
I've changed my mind regarding the front. For this I made the aluminum front again
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07698.jpg
The opening above is for 2 HDD coolers. Always fun to see how the flow is
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07697.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07696.jpg
Made it black
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07700.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07706.jpg
In order to be able to make this happen, there where some adjustments necessary
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07716.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07718.jpg
After some dremel cutting and filing
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07720.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07719.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07721.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07723.jpg
So I've slightly modified the existing hdd cages and placed it
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07748.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07747.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07744.jpg
And this is how the front looks for now. There also are coming two Lamptrons touch controllers in it
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07728.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07741.jpg
I also want to thank Cooler Master for providing theTurbine Master Mach 1.8 fans (http://www.coolermaster.nl/product.php?product_id=6695)
And...a beautiful M2 Silent pro 1500W (http://www.coolermaster.nl/category.php?category_id=22)
He's big....really big :)
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07750.jpg
Nice sticker, not unimportant lol
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07755.jpg
After placing the PSU I've been playing with the space. And to fill this space I've cut a piece of aluminum and bent it.
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07763.jpg
Cut a piece of 5mm black acrylic
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07764.jpg
This will be the bottom
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07762.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07766.jpg
On this I will place two reservoirs, not the 150mm but 250mm
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07768.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07769.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07772.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07773.jpg
Left here and there some space for some ideas
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07771.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07775.jpg
And at the back I've made a fanhole for a nice small 80mm fan
http://i759.photobucket.com/albums/xx233/kier1976/case3/DSC07777.jpg
More to come ;)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
Sponsor update:
Lamptron is also helping me with this build, So special thanks to Maurizio
Received the first touch controllers (http://www.lamptron.com/products/view/Fan_Controller_Touch). I asked for aluminum version (which is convenient for future builds) but for this build I'm adjusting these.
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07779.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07781.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07795.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07797.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07802.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07803.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07805.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07810.jpg
Specificaties:
Dimension：148.5mm X 42.5mm X 64.5mm (5.25inch bay)
Screen Dimension：118mm X 31.5mm
Power Output：Up to 30W per channel
Control Channels：6
Included cables:
6x Temp sensors
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07784.jpg
6x Sleeved fan cables
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07790.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07788.jpg
And a manual, jumper and molex cable
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07791.jpg
A very nice sleeve kit...The Modding tool kit (http://www.lamptron.com/products/view/Modding_Tool_kit)
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07812.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07813.jpg
A great set for the disassembly your 4 and 8 pin EPS (12V), ATX Connectors, PCI-E connectors and more!!!
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07816.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07815.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07814.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07817.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07819.jpg
Perfect kit
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07824.jpg
I also received some switches including 3x 19mm white dot momentary (http://www.lamptron.com/products/view/Black_Polycarbonate_Vandal_Resistant_Illuminated)
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07825.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07828.jpg
And 2x 19mm white dot latching (http://www.lamptron.com/products/view/Black_Polycarbonate_Vandal_Resistant_Illuminated)
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07829.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07830.jpg
Maybe a bit lazy but also ordered
5x connection cables (http://www.lamptron.com/products/view/Vandal_Resistant_Illuminated_Switch_Connection_C)
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07831.jpg
Nicely finished and sleeved
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07832.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07833.jpg
Couldn't resist to intall the switches
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07836.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07838.jpg
And with acrylic in front of it. Still need to cut the holes and raise the switches a little bit
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07839.jpg
And just one final pic to show the quality of the beautiful finished aluminum faceplate
http://i759.photobucket.com/albums/xx233/kier1976/case4/DSC07842.jpg
Fuganater
05-22-2012, 02:08 PM
Gonna be cool to be able to see the coolant!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
Sponsor update
I also want to welcome a great sponsor for this build .... Highflow (http://www.highflow.nl/)
Given the great choice of products, I have choosen some nice stuff.
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07843.jpg
Always nice to a Highflow package, Thank you Freddy!!!
First two beautifull reservoirs. The EK-Multioption RES X2 - 250 Advanced (http://highflow.nl/reservoirs/tube-reservoirs/ek-multioption-res-x2-250-advanced.html)
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07846.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07847.jpg
Some Tygon R3603 - HighFlow - 1/2 ID - 3/4 OD - Clear (http://highflow.nl/slangen/1-2-slangen-13mm-id/tygon-r3603-highflow-1-2-id-3-4-od-clear.html) tube
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07852.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07853.jpg
And nine great NorthQ 120MM 3711RL Silent Tornado (http://highflow.nl/fans/ventilatoren/northq/northq-120mm-3711rl-silent-tornado.html) fans
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07858.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07906.jpg
Also a small 80MM NorthQ 3709RL Silent Tornado (http://highflow.nl/fans/ventilatoren/northq/80mm-northq-3709rl-silent-tornado.html)
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07901.jpg
Playing with the fans ;)
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07886.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07874.jpg
I'm very satisfied with the fans, They will look perfect in this build
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07890.jpg
And last 2x Acryl Paneel - UV Rood / Transparant - 500x500mm (http://highflow.nl/modding/panelen/acryl-paneel-uv-rood-transparant-500x500mm.html)
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07910.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07912.jpg
Once everything unpacked, it's modding time. Cut a piece of red acrylic and cut a hole in it for a tube
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07932.jpg
In the black acrylic I have cut 2 holes with the size of the reservoirs cut to keep them in place
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07934.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07931.jpg
And cut a little piece for a fillport
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07937.jpg
Two fillports for the hdd cooler with a little touch of red
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07935.jpg
Playing with the tubes and of course placed the fans
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07914.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07916.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07922.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07924.jpg
Also placed the reservoirs with some BP links (these will be black)
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07928.jpg
After a bit of measuring and other small things, made the aluminum plate black
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07940.jpg
And placed everything back
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07941.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07943.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07948.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07953.jpg
Again connected the tubes
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07955.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07958.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07961.jpg
And two pics how one side stands now .... on to the next ;)
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07966.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case5/DSC07963.jpg
mDust
06-03-2012, 02:18 PM
:eek: I thought I felt Earth's center of gravity shift in March...now I know.
Filling the Hummer of cases might be as challenging as improving on it's design. It looks like you're well on your way to doing both. Nice work so far!
:eek: I thought I felt Earth's center of gravity shift in March...now I know.
Filling the Hummer of cases might be as challenging as improving on it's design. It looks like you're well on your way to doing both. Nice work so far!
Lol...thanks ;)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
So after some thinking and some urging of fellow modders I decided to do everything straight. It's more work ... but I'm in no hurry;)
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC07984.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC07985.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC07987.jpg
Also a nice idea I have seen in another build is the tilted mobo. Made the back plate again with 2mm aluminum, and marked the shape of the backtray
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC07975.jpg
Sawing, drilling and Filing
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC07976.jpg
Placed the original mobo tray, pasted black vinyl again to get it black. Maybe a bit lazy but this is so easy, quick, scratch resistant, inexpensive and just the right color.
The tilted mobo
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC07988.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC07992.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC07993.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08000.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08003.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08004.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08006.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08008.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08013.jpg
Missing something ... red I think. therefore entirely dismantled the backplate and cut a red plate
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08041.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08042.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08043.jpg
And everything reassembled, this time with countersunk m3 bolts. Rivets are unfortunately too short now
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08044.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08045.jpg
Nice touch... inside is red now :)
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08047.jpg
And placed it. Now with some daylight pics
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08049.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08052.jpg
Placed NorthQ fans in front instead of the Turbine masters
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08026.jpg
And received some nice red hardware
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08030.jpg
An made an additional air outlet. Will place mesh later.
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08055.jpg
Furthermore beeing busy with the acrylic pipe, to get this as straight as possible. Just like the other side, cut a piece of aluminum with fanhole
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08054.jpg
Made it black and cut and placed a piece of red acrylic. Placed a loose tube for size and see if it's straight
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08056.jpg
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08062.jpg
And fits nicely along the mobo tray
http://i759.photobucket.com/albums/xx233/kier1976/case6/DSC08067.jpg
And the weekend is over ... unfortunately. More Next week ;)
d_stilgar
06-03-2012, 06:46 PM
This is looking so good!
Angled motherboards... Something rarely seen...
This is looking so good!
thanks ;)
Angled motherboards... Something rarely seen...
thought it was a nice touch
licenseless
06-06-2012, 06:27 PM
so i was looking at your build... and i thought to my self "what is this weird sensation i am feeling" :eek:
i have never felt this way before... so i tried to describe it to my self.
But nothing i could say would explain it well enough... so i decided to create a whole new word to add to the dictionary so that i could properly explain how i feel about your build...
so here it goes... the new word
Jealous
what... you dont like that word ... how about
envious
pissed off...
disappointed in ones self
hatefull...
oh i dont know... the list on goes...
god damn this is a nicely thought out and so far well executed build...
i hate your faces
:up:
hahahahahahahaah :D
Best comment I ever had....thanks bro ;) But please don't hate me :D
licenseless
06-08-2012, 10:00 AM
Best comment I ever had....thanks bro ;) But please don't hate me :D
No worries hahahahahahahah
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ekwb.png (http://www.ekwb.com/)
EKWB (http://www.ekwb.com) Sponsor update!!!
Received this week a great package from EKWB. Again my thanks to Gregor and everyone from EKWB that makes this possible. All beautiful products for CaseLabs build
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08210.jpg
The EK-Supremacy - Nickel (http://www.ekwb.com/shop/ek-supremacy-nickel.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08272.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08213.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08219.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08220.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08222.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08225.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08216.jpg
The EK-FC680 GTX Backplate - Black CSQ (http://www.ekwb.com/shop/ek-fc680-gtx-backplate-black-csq.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08227.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08229.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08230.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08232.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08233.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08234.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08239.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08240.jpg
EK-FC680 GTX - Acetal + Nickel CSQ (http://www.ekwb.com/shop/ek-fc680-gtx-acetal-nickel-csq.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08292.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08293.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08294.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08295.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08297.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08299.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08304.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08305.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08306.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08307.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08308.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08309.jpg
EK-Multioption RES X2 - 250 Advanced (http://www.ekwb.com/shop/ek-multioption-res-x2-250-advanced.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08241.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08271.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08245.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08247.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08250.jpg
2x EK-CoolStream RAD XT (360) (http://www.ekwb.com/shop/ek-coolstream-rad-xt-360.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08251.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08270.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08253.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08255.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08256.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08258.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08259.jpg
2x EK-CoolStream RAD XT (240) (http://www.ekwb.com/shop/ek-coolstream-rad-xt-240.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08268.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08269.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08263.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08265.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08267.jpg
A EK-DDC Dual TOP V.2 G1/4 - Black Acetal (http://www.ekwb.com/shop/ek-ddc-dual-top-v-2-g1-4-black-acetal.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08274.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08273.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08277.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08278.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08275.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08280.jpg
Some beautiful EK-PSC Fitting 13mm - G1/4 Black (http://www.ekwb.com/shop/ek-psc-fitting-13mm-g1-4-black.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08281.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08284.jpg
And some EK-PSC Adapter 90° G1/4 Black (http://www.ekwb.com/shop/ek-psc-adapter-90-g1-4-black.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08287.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08288.jpg
And EK-PSC Adapter 45° G1/4 Black (http://www.ekwb.com/shop/ek-psc-adapter-45-g1-4-black.html)
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08289.jpg
http://i759.photobucket.com/albums/xx233/kier1976/Caselabs%20Magnum%20M8K/Update1/DSC08291.jpg
msmrx57
07-22-2012, 10:48 AM
Nice looking hardware you've got there. :up: I really love the look of the video card piece.
Fuganater
07-22-2012, 12:34 PM
I'm digging the new EK gear.
Stonerboy779
07-22-2012, 10:29 PM
I'm digging the new EK gear.
Really? I am not really a fan of their new design for things don't like the circles one bit.
TLHarrell
07-23-2012, 01:17 AM
I think the circles would look cool in my TRON build... sadly sitting in the corner gathering dust as I don't have money for it right now...
Wouldn't be perfect for other projects though. I'd rather see it dead flat. You could have it engraved. Heck, I'd love to be able to laser engrave some back plates. That'd be fun.
SXRguyinMA
07-23-2012, 08:45 AM
Yea I'm not a huge fan of the circles either. They'd need to be part of the mod somehow for me to put their circle-filled backplate all in it lol
I really like the new design, but I can imagine that the design for some builds/ themes
will not fit. But hopefully this build will change the negative thoughts about it
Update!!!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ekwb.png (http://www.ekwb.com/)
It has been a while, but here a big big update
First a thank you note for Sicomputers (http://www.sicomputers.nl). The GPUs (GTX680) were not available, but thanks to the good and fast service from Sicomputers I got 2 beautiful cards.
And as promised an honorable mention with banner ;)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Project3-2.jpg
2 beautiful GTX cards
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08108.jpg
First tested on air
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08107.jpg
Time to give the cards a transformation
EK-FC680 GTX - Acetal + Nickel CSQ (http://www.ekwb.com/shop/ek-fc680-gtx-acetal-nickel-csq.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08355.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08359.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08365.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08354.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08369.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08368.jpg
And the great EK-FC680 GTX Backplate - Black CSQ (http://www.ekwb.com/shop/ek-fc680-gtx-backplate-black-csq.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08367.jpg
Also placed the EK-Supremacy - Nickel (http://www.ekwb.com/shop/ek-supremacy-nickel.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08374.jpg
One GPU placed
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08372.jpg
For now with multi link, but will not use these in this build.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08376.jpg
Really like the backplate.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08380.jpg
Placed 2e GPU
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08383.jpg
Allready installed the radiators with theNorthQ (http://highflow.nl/fans/ventilatoren/northq/northq-120mm-3711rl-silent-tornado.html) fans
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08493.jpg
With the EK-CoolStream 360 RAD XT (http://www.ekwb.com/shop/ek-coolstream-rad-xt-360.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08500.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08505.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08485.jpg
And then I received a great package from....van Freddy.... Highflow (http://highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08509.jpg
With (hope so) the latest products that I need for this build.
Offcourse with some Fillports (http://highflow.nl/reservoirs/fillports/bitspower-2xg1-4-fillport-matt-black-bp-mbwp-c04.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08511.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08512.jpg
And 15mm extenders (http://highflow.nl/aansluitingen/fittingen/bitspower/bitspower-g1-4-matt-black-ig1-4-extender-15mm-bp-mbwp-c60.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08513.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08514.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08515.jpg
90 degrees adapters (http://highflow.nl/aansluitingen/fittingen/bitspower/matt-black/bitspower-g1-4-matt-black-90-degree-id-1-4-adapter-bp-mbwp-c39.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08516.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08517.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08520.jpg
Smaller extenders (http://highflow.nl/aansluitingen/fittingen/bitspower/bitspower-g1-4-matt-black-ig1-4-extender.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08521.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08522.jpg
Because I've made the angle in the mobo tray, the 45 degrees rotery's will not fit. Therefore I've ordered some 30 degrees rotery's (http://highflow.nl/aansluitingen/fittingen/bitspower/bitspower-g1-4-matt-black-rotary-30-degree-ig1-4-adapter-bp-mb30r.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08523.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08524.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08525.jpg
and offcourse my favorite adapter, the multi link adapter (http://highflow.nl/aansluitingen/fittingen/sli-crossfire/bitspower-multi-link-sli-cf-adapter-bp-mbwp-c47-matt-black.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08527.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08528.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08529.jpg
I still have some other ideas for the Case labs case, but for this I'll need some more acrylic. Therefore 3mm transparent (http://highflow.nl/modding/panelen/acryl-paneel-transparant-500x500mm.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08532.jpg
And UV red acrylic (http://highflow.nl/modding/panelen/acryl-paneel-uv-rood-transparant-500x500mm.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08533.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08535.jpg
Freddy/ Highflow (http://highflow.nl/) thank you again for the quick service and good products and ... have a great holiday.
Now the explanation why this order has taken place. I'll will make this setup with the solid tubes
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08452.jpg
From the CPU, 2 pipes going up. Because there's an angle in the mobo I can not use the 45 degree fitting to connect on a fillport
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08536.jpg
That's why I'm using the 30 degrees rotery (http://highflow.nl/aansluitingen/fittingen/bitspower/bitspower-g1-4-matt-black-rotary-30-degree-ig1-4-adapter-bp-mb30r.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08539.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08540.jpg
Ordered the extenders (http://highflow.nl/aansluitingen/fittingen/bitspower/bitspower-g1-4-matt-black-ig1-4-extender.html) to lower the in- and outlet.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08542.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08543.jpg
To create a corner with the acrylic tubes I use the 15mm extender (http://highflow.nl/aansluitingen/fittingen/bitspower/bitspower-g1-4-matt-black-ig1-4-extender-15mm-bp-mbwp-c60.html), 2x multi link (http://highflow.nl/aansluitingen/fittingen/sli-crossfire/bitspower-multi-link-sli-cf-adapter-bp-mbwp-c47-matt-black.html) and the 90 graden adapter (http://highflow.nl/aansluitingen/fittingen/bitspower/matt-black/bitspower-g1-4-matt-black-90-degree-id-1-4-adapter-bp-mbwp-c39.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08574.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08583.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08578.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08575.jpg
Now only a multi link, later there will be added a fillport (http://highflow.nl/reservoirs/fillports/bitspower-2xg1-4-fillport-matt-black-bp-mbwp-c04.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08576.jpg
More multi links
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08584.jpg
And connected everything
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08581.jpg
Chapter red acrylic :)
Previously I had a 5mm thick transparent plate between the case and the pedestal. But I want the red lines run entirely in this build, therefore changed the middle part.
The red acryl (http://highflow.nl/modding/panelen/acryl-paneel-uv-rood-transparant-500x500mm.html).
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08554.jpg
Cut it.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08555.jpg
After this cut the 3 mm transparent transparant acryl (acrylic
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08556.jpg
Placed like this.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08558.jpg
Removed the plastic.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08559.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08560.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08565.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08569.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08570.jpg
The plate is transparent to get a free sight what happens in the pedestal.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08563.jpg
I was not very happy with the front, just didn't like it. Therefore I've sawn a new piece of red acrylic
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08594.jpg
With the sizes of the detachable front.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08595.jpg
Used some spacers.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08596.jpg
Also sawn a new plate with the fanholes and the holes for the Lamptron switches (http://www.lamptron.com/products/view/Black_Polycarbonate_Vandal_Resistant_Illuminated)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08597.jpg
With illuminated edges
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08589.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08592.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08591.jpg
The 2 spaces above the HDD coolers are for the Lamptron controllers (http://www.lamptron.com/products/view/Fan_Controller_Touch)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08598.jpg
The last thing i've did is sleeving the Coolermaster 1500w Silent pro M2 (http://www.cmstore.eu/silent-pro-m2/)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08446.jpg
Finished
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08547.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08548.jpg
24 pins
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08549.jpg
CPU cables
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08550.jpg
And some GPU cables
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08551.jpg
Connected everything to see how it looks.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08483.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08482.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M1/DSC08479.jpg
That's it for now...Grtz.
Fuganater
08-06-2012, 02:01 PM
Awesome!
Update!!!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ekwb.png (http://www.ekwb.com/)
Hmm...vacation is almost over and spent the last few days modding the M8. After some brainstorming about the red line across the case, I have made this update. Started again with a lot of red acrylic
For the sides (pedestal) I first sawn the transparant acrylic and endorsed the fanholes
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08679.jpg
Drilled holes for the fretsaw
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08680.jpg
Also marked the red acrylic
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08678.jpg
And drilled holes
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08681.jpg
Again some sawing. The red result :)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08697.jpg
On the corners I also drilled holes for the standoff's
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08700.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08701.jpg
Placed some standoff's on existing thread
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08704.jpg
And placed the orginal back
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08705.jpg
Transparent acrylic also sawn
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08698.jpg
Placed on the red acrylic.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08708.jpg
And made the transparent acrylic black
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08716.jpg
Marked/ sawn the orginal cover
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08714.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08715.jpg
Because I used the standoff's on the covers, I also needed to adjust to the originals from the frame.
Before:
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08710.jpg
Standoff's
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08713.jpg
After:
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08712.jpg
Placed everything back
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08635.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08637.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08634.jpg
Btw. the aluminium edges will be painted black;)
I also want the red line in the front of the pedestal ... with a slot for the Blu-ray.
Orginal cover marked and sawn.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08602.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08603.jpg
Made this the same way as the side panels
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08605.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08610.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08616.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08617.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08609.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08613.jpg
Total shot
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08638.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08639.jpg
Sawn a transparent acrylic plate for the bottom of the pedestal
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08652.jpg
Where a red glow underneath the case comes from later on.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08656.jpg
After a good tip from my friends from TFoM I've also changed something in the front. The HDD coolers were to shiny, so I applied some black transparent acrylic.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08693.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08694.jpg
Better like this...only need some leds :)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08687.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08691.jpg
Need to look what kind of leds I'm gonna use.
Last but not least the back, lol, yes the back is also important. Target is just to mod as much as possible, but nevertheless that the M8 is still recognizable. So sawn a new piece of red acrylic and marked more holes and squares.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08640.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08641.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08642.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08644.jpg
Made the same shape transparent acrylic
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08646.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08648.jpg
And it's black again
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08651.jpg
For the 5 air outlets I have used the Caselabs mesh (acrylic edges will be polished)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08677.jpg
Adjusted the original 140 mm fanholes.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08658.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08660.jpg
Again with red, black and mesh.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08668.jpg
Total shot
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08664.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08673.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M3/DSC08671.jpg
Hope you like this update so far, maybe this weekend more updates about the internal ;)
Update!!!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ekwb.png (http://www.ekwb.com/)
Target is as good as reached this holiday. Connecting all solid acrylic tubing.
Have taken some extra pics t, so a lot of pictures and little words;)
To begin, I made a aluminum plate to support the angled mobo tray containing a slot for cables etc.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08721.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08723.jpg
Marked 2 holes above the mobo for the in\ outlet CPU.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08718.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08719.jpg
Cut a plate red acrylic with 2 holes in it
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08720.jpg
Fitting.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08725.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08724.jpg
And cut the right sizes acrylic tubes.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08763.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08768.jpg
Also connected all other tubes.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08769.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08771.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08775.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08776.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08777.jpg
240 rad placed and marked the holes downwards.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08774.jpg
Made the link to the other side.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08784.jpg
CPU outlet goes into the reservoir.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08761.jpg
Inlet CPU comes from below the pedestal, in which a solid tube in the center of the 2 reservoirs is running.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08726.jpg
From the left reservoir is a tube running to the pumps (2x MCP355 with EK-DCC Dual top V.2)
Attach the pump to the HDD cage.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08728.jpg
Inlet pump
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08736.jpg
Outlet goes down to.....
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08728.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08747.jpg
The 240 radiator
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08748.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08745.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08737.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08740.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08744.jpg
Outlet rad goes down again.
From the HDD there is also going a tube downwards. Using later on a fill port through the acrylic midplate
Adjusted the piece horizontal red acrylic with the hole in it.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08756.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08750.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08751.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08754.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08758.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M4/DSC08757.jpg
That's it ;)
Stonerboy779
09-02-2012, 04:55 PM
The neatness of this make it look so bloody wonderful
Update!!!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ekwb.png (http://www.ekwb.com/)
Where were we .... the acrylic tubes where almost finished, now it's time to make some covers.
First the CPU first connection, this is becoming exactly in the center of the two reservoirs
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08870.jpg
The midplate, Here I have created the holes for the tubes and fill-ports.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08789.jpg
For the left 240 rad I have bent an aluminum cover and made it black.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08852.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08851.jpg
Cut a piece of red acrylic cut to the dimensions of the radiator. And past this black vinyl
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08853.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08850.jpg
Besides the radiator there is a nice space for all wiring but I don't want to see the wires. Therefore a cover. Cut, bent and made it black.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08849.jpg
To hide the HDDs and a nice black background for the tubes, I cut a piece of aluminum and again made it black, also made a nice red acrylic roof.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08794.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08797.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08798.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08800.jpg
The earlier made red acrylic placed on the radiator.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08813.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08814.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08815.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08848.jpg
The cover for the wiring.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08845.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08847.jpg
One side complete.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08950_zps7f335245.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08949_zps9d1e1f26.jpg
Gonna make both sides almost the same. So cut another piece of aluminum for the HDD cover.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08934_zpsa61d5d93.jpg
Made it black
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08936_zpsec970c27.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08938_zps26d7841b.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08939_zps6d90de91.jpg
Again, a piece of red acrylic for the other radiator
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08946_zps802941db.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08941_zps2459b19c.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08944_zpsb0469cd0.jpg
Then suddenly a package from.......Coolermaster (http://www.coolermaster.nl/index.php)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08931_zpsa449dbc9.jpg
With a box full of game gear in the colors of the Case Labs build.. Thank you Cooler Master Marco, Ruud and everyone who made this possible.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08874_zps5aad5638.jpg
The CM Storm Trigger Keyboard (http://www.coolermaster.nl/product.php?product_id=6793):
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08889_zpsba2999dd.jpg
•High durability gold-plated Cherry switches rated for over 50 million key strokes
•Multi-media control keys for convenient sound control
•5 macro keys with profile management
•18K gold plated ultra low latency USB plugs
•Anti-ghosting 6 key rollover
•64KB on-board memory for profile storage
•Storm tactics key for deactivation of Windows key
•1000Hz driverless polling / 1ms response time
•Two port enhanced USB 2.0 hub
•Detachable wrist rest
•Braided cable for durability
•Non-slip rubber coating
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08876_zps5fa85ca6.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08878_zps8677c672.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08882_zps9d29cbe9.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08880_zps0a4f11ee.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08885_zps8bef44ba.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08886_zpsf93fb052.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08888_zpsea8d391b.jpg
The CM Storm Sentinel Advance II (http://www.coolermaster.nl/product.php?category_id=3577&product_id=6794):
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08890_zps9fa32dbd.jpg
•200 - 8200 DPI tracking resolution
•128 KB Sentinel-X TM Memory for profiles and macros
•On the fly DPI adjustments (+/- 200 DPI)
•As little as 1.5 mm lift-off distance
•Up to 150 IPS – 3.8 m/s
•125 Hz – 1000 Hz USB rate fine-tuning
•5 profiles with 4 DPI setting each
•8 programmable buttons
•9 virtual buttons via button combinations
•Right-hand Ergonomic Design
•Customizable OLED logo
•Customizable multi color LED light system
•5 x 4.5g weight fine-tuning system
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08893_zps3340b7e9.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08894_zpsf03dad71.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08895_zps60cbbb14.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08896_zps39ba6889.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08897_zpsfafedd2a.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08899_zpsdaaad6d0.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08901_zps953e2e6a.jpg
The CM Storm Speed-RX (http://www.coolermaster.nl/product.php?category_id=3578&product_id=6795):
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08903_zps73929d1e.jpg
•Microscopic Synthetic Mesh for optimum precision
•Smooth nano fibers for reduced drag and better comfort
•Extra thick (5mm) soft rubber center piece for better ergonomics and endurance
•Triple Layer heat bonding process for improved durability and prevent peeling
•Grip coating on bottom side to keep the mousepad in place
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08905_zpsf4f997fc.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08904_zps317702c1.jpg
And last but not least, the CM Storm Sirus 5.1 gaming headset (http://www.coolermaster.nl/product.php?product_id=6709):
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08909_zps0e3d59e9.jpg
•True 5.1 Surround Sound (4 high quality speakers on each side)
•On-The-Fly Rear, Center, & Front speaker control for maximum sound customization (in USB mode only)
•Interchangeable ear-cups, micro weave for breathable audio and leatherette for improved noise insulation
•Dual gold-plated USB Connectors for improved signal quality
•Extra long durable and flexible microphone arm with LED mute indicator
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08906_zps9d03406c.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08914_zps3b78fa26.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08916_zps58cc2129.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08917_zps64d04f20.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08920_zps03077ba5.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08922_zps357b3e44.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08926_zps67063a2f.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/CM/DSC08929_zps8eb21a31.jpg
So the ultimate gaming kit. Thanks again and complete review follows when everything is plugged in.
I got a lot of questions about the acrylic tubes, how I make them fit.
The acrylic tube is unfortunately with a tolerance, and unfortunately I rarely got the 12mm.
The tube that I most of the time get is generally 12.23 mm. Unfortunately, this does not fit into a multi link (http://www.highflow.nl/aansluitingen/fittingen/sli-crossfire/bitspower-multi-link-sli-cf-adapter-bp-mbwp-c47-matt-black.html)
Specs of the multilink C47 has no internal dimensions, therefore the C71
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/BP-CBWP-C71--600X400-3.jpg
Step by step how I do this
Tube with the tolerance
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08861.jpg
Marked the tube and cut it with a junior saw.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08855.jpg
Both ends file straight.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08856.jpg
Removed a thin layer internally with a sharp knife
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08857.jpg
My dremel extention tool, set to 8mm
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08860.jpg
And this a few times around the tube. After some filing and measuring the right size
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08863.jpg
Now you have a sharp edge on the side which is not very good for your o-rings in the multilink.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08866.jpg
The original BP links also have a slanted edge, so made this also. File a slanted edge with a small file.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08867.jpg
And ready is your custom made crystal link.
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08868.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M5/DSC08870.jpg
To end this update a small teaser :D
http://i759.photobucket.com/albums/xx233/kier1976/DSC09016_zpsd9b88b11.jpg
Fuganater
09-23-2012, 04:08 PM
Nice tutorial! I wish I could get 12mm stuff in the states.
Another Update!!!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ekwb.png (http://www.ekwb.com/)
Ok, can't resist posting the pics of a filled M8;)
After adding 2.5 liter EK-Ekoolant blood red (http://www.ekwb.com/shop/accessories/water-additives-coolants/ek-ekoolant-blood-red-premix-1000ml.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC09016_zps28170397.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC09013_zpsd12f6614.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC09010_zps1eb37d31.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC09012_zps7f110d68.jpg
Still some air in the front
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC09007_zps7edf40ef.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC09006_zps4fcc7d5f.jpg
Picture with some leds, but don't know if i keep these
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08981_zpsb37b827c.jpg
Other side a bit more careful so just in case everything is covered
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08960_zps7290ee10.jpg
And again a build without leaks, maybe because this time I used EKWB rotery's ;)
After some hours :thumb:
The beautiful EK-FC680 GTX - Acetal + Nickel CSQ (http://www.ekwb.com/shop/ek-fc680-gtx-acetal-nickel-csq.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC09002_zps3194c9f7.jpg
And the EK-Supremacy - Nickel (http://www.ekwb.com/shop/ek-supremacy-nickel.html)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08999_zps6b3d9ba7.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08996_zpsc304b4ca.jpg
All tubes filled
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08994_zps6087a6c0.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08993_zps638d4f96.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08992_zps234b04e6.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08984_zps9583ff02.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08989_zps691b5dcf.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08986_zpsea3fc659.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M6/DSC08987_zpscbc77d76.jpg
Update!!!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/Caselabs.jpg (http://www.caselabs-store.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/hhead1_main_jpg.jpg (http://www.lamptron.com/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/header.png (http://www.highflow.nl/)
http://i759.photobucket.com/albums/xx233/kier1976/Banner/logo_cm-1.jpg (http://www.coolermaster.com/)
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Alienware/Banner/EKWB.jpg (http://www.ekwb.com/)
It took a while, but here is on of the latest updates of the CaseLabs M8 build
Because of some problems related to shipping and other stuff it took a little longer before i received the second Lamptron touch controller.
Thanks to Highflow (http://www.highflow.nl) I received it so that I could continue
The 2e Lamptron touch controller (http://www.highflow.nl/fans/controllers/5.25-bay/lamptron-fct-fan-controller-6x-30w-channels-touchscreen-black.html)
Not long after this I got the controller from Lamptron :) thanks Lamptron (http://www.lamptron.com/) !!!
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09545.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09542.jpg
Installed and tested. Works perfectly!!!
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09552.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09557-1.jpg
Looking good i think
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09657.jpg
Time to connect the cables
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09880.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09882.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09887.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09018.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09020.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09022.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09021.jpg
Before the power goes on some detail shots
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09888.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09894.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09897.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09899.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09900.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09901.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09908.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09912.jpg
I also have applied some SMD LED strips, which are made available by a good friend of mine from lumenledverlichting (https://www.lumenledverlichting.nl/). Clenn Thanks!!!
http://i759.photobucket.com/albums/xx233/kier1976/Banner/ledlogo2.png (https://www.lumenledverlichting.nl/)
Above a white LED strip and underneath 2 red LED strips, and this on both sides
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09564.jpg
And on top of the HDD coolers also a LED strip instead of a single LEDs
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09628.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09630.jpg
Something wrong with this picture above ;)
Not anymore now!!
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09636.jpg
Looks good with the lights and fans
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC096.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09666.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09670.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09671.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09673.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09675.jpg
Up and running!!!
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09677.jpg
http://i759.photobucket.com/albums/xx233/kier1976/NEW/Caselabs/M7/DSC09679.jpg
Soon the final photoshoot ;)
d_stilgar
12-01-2012, 06:18 PM
Looks great. That's a lot of nice kit in that machine. Are you going to be doing any big mods to the keyboard/mouse to fit the theme?
Scottie Daddy
12-02-2012, 08:31 PM
I agree. Looks awesome... easily one of my favorite mode on this site.
Lets see some of that modding to the keyboard and mouse now :)
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.