Bulldozer - Military D9: A Repaint

[TheGreatSatan]

The Mustang case at work doesn't as good as anymore. It's really showing it's age and frankly looks boring next to the Steampunk Level 10 case.

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/cookie1.jpg

So, I decided that we should replace it with something cooler, but I really don't want to do a whole new project just for a work case. After all, this would all be out of my pocket. I thought about possibly using a case I already had in my modding area and the Ark to did come to mind, but I don't think it would fit.

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/.pond/p1090691.jpg.w300h400.jpg

Then I remembered Bulldozer, but it's an AMD theme case and components going in it are Intel.

Then I thought, what about a repaint?

I looked online at other types of Bulldozers and found the military's D9. A green Dozer!

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/d9_cat.jpg

First I start with the intake mesh

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110902.jpg

Then the panels. I'm using an Olive color from Krylon

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110900.jpg

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110907.jpg

Then it was time to blast all of the rest

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110912.jpg

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110913.jpg

Once it all dried I starting putting it all back together

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110916.jpg

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110917.jpg

I was going to use a single 200mm fan, but didn't have one thin enough to fit here, so I went went with two 120's instead

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110918.jpg

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110921.jpg

The right panel is done so I put it back on

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110923.jpg

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110924.jpg

And I put the window back on the panel, but it's really hard to tell it's even there

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110925.jpg

[TheGreatSatan]

I finished the repaint of the bay covers and the DVD drive

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110927.jpg

And the slot covers are finished too. Two are empty for the video card going inside

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110930.jpg

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110932.jpg

More to come!

[Fuganater]

Some of the yellow looks like it is bleeding through.

[AmEv]

Some of the yellow looks like it is bleeding through.

I can see it, too. Mainly in the 90-degree crevices.

[TheGreatSatan]

I added the "D9" to represent the version of Bulldozer this is

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110934.jpg

Then I personalized it with the company name and the department where I work "Build Your Own PC"

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110935.jpg

http://www.pcmodhouse.com/sitebuildercontent/sitebuilderpictures/p1110936.jpg

[Stonerboy779]

I thought that was "Bring Your Own PC" haha

[xr4man]

nice