polishing?

[Elum!nal]

could anyone tell me how can i polish aluminium ? What do I need for it ?

[Drew]

Here in the UK, G3 cutting compound followed by a heavy T-Cut should do the trick, but in Estonia?

Pass.

Drew

[Aero]

You need a cloth polishing wheel. Cotton is the best. Then you will need polishing compound, and sand paper. 220,400,800,1400,2000 rit is usually good I think. Then when done with the 2000 grit run over it with the polishing compound and the cotton wheel on a grinder of dremel. I think thats probably the best way.

[CanaBalistic]

A dremel is good but very slow on big projects. If you have a bench grinder you can buy cotton wheels for it. Start it up and put your compound on it and go to work. Big pieces will be done in minutes compared to hours with a dremel.