Short Modder
10-06-2014, 05:05 PM
Hey guys I haven't posted here in a while. Though really have no computer mods off my own, I have done a few mods to my 1995 Ford Bronco, so I'll show you the one I'm most proud of.
I decided that since I don't have the funds to upgrade the 10 year old stereo in my truck, I'd do a bit of tinkering with what I have. I've got an after market Pioneer head unit that the previous owner had installed. It has a few extra gimmicks like an auxiliary port on the BACK, sub/pre-amp outputs, as well as a plug in Bluetooth adapter for hands-free calls. Since the BT adapter was so antiquated (only handled calls, no other media), I had originally run a 6ft cable from the back of the radio out under the dash which worked like a charm. But it got old. I got tired of it hanging out from under the dash making it look messy. Plus if a potential burglar looked in and saw that, they might think I have an tablet or phone stashed in the truck somewhere.
To clean things up, I had to figure out how to somehow fix it to the dash so I could use a 3.5mm aux. cable to plug a device in and throw it in the center counsel when not in use. I did some exploring and found out that the PO had cut the wires to the cigarette lighter. No big deal since I have no use for it and there's always another working 12v power point if I need to use one.
I thought, "hey, why not mount the jack in the ashtray?" I chose to put the jack where the 12v cigarette lighter socket was as it was no longer functioning and I had no intention of repairing it. I tore it apart and thought about what I had on hand. I used the little metal beauty ring from the socket and put a plastic insert in it and mount the jack through that. Nothing too permanent and no holes on the dash. Plus it also keeps the jack out of sight when not in use.
Enough blabbering, here are some pictures (pardon the messy desk, multiple projects packed in a tiny room):
First, was to take the ashtray outta the dash. Easy enough.
http://www.supermotors.net/getfile/832520/fullsize/traymod_1.jpg
Here's the PO's handiwork (I swear that's spelled correctly)
http://www.supermotors.net/getfile/832521/fullsize/traymod_2.jpg
Stripped down.
http://www.supermotors.net/getfile/832522/fullsize/traymod_3.jpg
Here we have two types of plastic. Styrene and something I pulled from a laptop bag (used to stiffen the bottom). The styrene is thicker than the black stuff and is smooth, but the black is textured and looks like something an OEM would use. Also shown is the metal ring off of the socket as well as a cheap Radio Shack stereo jack from an unfinished project.
http://www.supermotors.net/getfile/832523/fullsize/traymod_4.jpg
Test fitting. Looks good front and back.
http://www.supermotors.net/getfile/832524/fullsize/traymod_5.jpg
http://www.supermotors.net/getfile/832525/fullsize/traymod_6.jpg
Stuck in the tray for looks. I wonder what it looks like in black?
http://www.supermotors.net/getfile/832526/fullsize/traymod_7.jpg
Textured plastic.
http://www.supermotors.net/getfile/832527/fullsize/traymod_8.jpg
http://www.supermotors.net/getfile/832528/fullsize/traymod_9.jpg
Put together.
http://www.supermotors.net/getfile/832529/fullsize/traymod_10.jpg
In place.
http://www.supermotors.net/getfile/832530/fullsize/traymod_11.jpg
I epoxied everything together so it wouldn't pull out when the cable was tugged or unplugged.
http://www.supermotors.net/getfile/832531/fullsize/traymod_12.jpg
It works! Time to put it in the truck.
http://www.supermotors.net/getfile/832532/fullsize/traymod_13.jpg
Here's a quick pic of my head unit. Nothing fancy, it does what I need.
http://www.supermotors.net/getfile/832569/fullsize/traymod_14.jpg
And my under dash rigging. I reused this bit by cutting the end off and soldering it to the the 3.5mm stereo jack in the tray.
http://www.supermotors.net/getfile/832570/fullsize/traymod_15.jpg
The auxiliary cables
http://www.supermotors.net/getfile/836762/fullsize/traymod_16.jpg
Here's the ashtray reinstalled.
http://www.supermotors.net/getfile/836763/fullsize/traymod_17.jpg
The excess wires are zip-tied together.
http://www.supermotors.net/getfile/836764/fullsize/traymod_18.jpg
And here is my PSP plugged in (yes I still use one of these things!) and playing through the truck's speakers.
http://www.supermotors.net/getfile/836768/fullsize/traymod_19.jpg
It was a fun little project to do. It was cheap and fairly easy. Thanks for looking!
I decided that since I don't have the funds to upgrade the 10 year old stereo in my truck, I'd do a bit of tinkering with what I have. I've got an after market Pioneer head unit that the previous owner had installed. It has a few extra gimmicks like an auxiliary port on the BACK, sub/pre-amp outputs, as well as a plug in Bluetooth adapter for hands-free calls. Since the BT adapter was so antiquated (only handled calls, no other media), I had originally run a 6ft cable from the back of the radio out under the dash which worked like a charm. But it got old. I got tired of it hanging out from under the dash making it look messy. Plus if a potential burglar looked in and saw that, they might think I have an tablet or phone stashed in the truck somewhere.
To clean things up, I had to figure out how to somehow fix it to the dash so I could use a 3.5mm aux. cable to plug a device in and throw it in the center counsel when not in use. I did some exploring and found out that the PO had cut the wires to the cigarette lighter. No big deal since I have no use for it and there's always another working 12v power point if I need to use one.
I thought, "hey, why not mount the jack in the ashtray?" I chose to put the jack where the 12v cigarette lighter socket was as it was no longer functioning and I had no intention of repairing it. I tore it apart and thought about what I had on hand. I used the little metal beauty ring from the socket and put a plastic insert in it and mount the jack through that. Nothing too permanent and no holes on the dash. Plus it also keeps the jack out of sight when not in use.
Enough blabbering, here are some pictures (pardon the messy desk, multiple projects packed in a tiny room):
First, was to take the ashtray outta the dash. Easy enough.
http://www.supermotors.net/getfile/832520/fullsize/traymod_1.jpg
Here's the PO's handiwork (I swear that's spelled correctly)
http://www.supermotors.net/getfile/832521/fullsize/traymod_2.jpg
Stripped down.
http://www.supermotors.net/getfile/832522/fullsize/traymod_3.jpg
Here we have two types of plastic. Styrene and something I pulled from a laptop bag (used to stiffen the bottom). The styrene is thicker than the black stuff and is smooth, but the black is textured and looks like something an OEM would use. Also shown is the metal ring off of the socket as well as a cheap Radio Shack stereo jack from an unfinished project.
http://www.supermotors.net/getfile/832523/fullsize/traymod_4.jpg
Test fitting. Looks good front and back.
http://www.supermotors.net/getfile/832524/fullsize/traymod_5.jpg
http://www.supermotors.net/getfile/832525/fullsize/traymod_6.jpg
Stuck in the tray for looks. I wonder what it looks like in black?
http://www.supermotors.net/getfile/832526/fullsize/traymod_7.jpg
Textured plastic.
http://www.supermotors.net/getfile/832527/fullsize/traymod_8.jpg
http://www.supermotors.net/getfile/832528/fullsize/traymod_9.jpg
Put together.
http://www.supermotors.net/getfile/832529/fullsize/traymod_10.jpg
In place.
http://www.supermotors.net/getfile/832530/fullsize/traymod_11.jpg
I epoxied everything together so it wouldn't pull out when the cable was tugged or unplugged.
http://www.supermotors.net/getfile/832531/fullsize/traymod_12.jpg
It works! Time to put it in the truck.
http://www.supermotors.net/getfile/832532/fullsize/traymod_13.jpg
Here's a quick pic of my head unit. Nothing fancy, it does what I need.
http://www.supermotors.net/getfile/832569/fullsize/traymod_14.jpg
And my under dash rigging. I reused this bit by cutting the end off and soldering it to the the 3.5mm stereo jack in the tray.
http://www.supermotors.net/getfile/832570/fullsize/traymod_15.jpg
The auxiliary cables
http://www.supermotors.net/getfile/836762/fullsize/traymod_16.jpg
Here's the ashtray reinstalled.
http://www.supermotors.net/getfile/836763/fullsize/traymod_17.jpg
The excess wires are zip-tied together.
http://www.supermotors.net/getfile/836764/fullsize/traymod_18.jpg
And here is my PSP plugged in (yes I still use one of these things!) and playing through the truck's speakers.
http://www.supermotors.net/getfile/836768/fullsize/traymod_19.jpg
It was a fun little project to do. It was cheap and fairly easy. Thanks for looking!