POWER CELL (Scratch Build cylinder PC)

[Zenator]

http://i.imgur.com/9J7lIDC.jpg


Proudly Sponsored By ASUS.



PC Build Specs:

Height up to 700mm.
Width: up to 400mm.
Case Shape: cylinder. One base, One top, 3 Pillars, 3 clear windows. Being build ATM.
Case Colour: Grayish/white, with some black & red.
MoBo: Asus H97I-PLUS Mini ITX LGA1150 Motherboard That will mounted to the bottom and the case.
GPU: ASUS TURBO GEFORCE GTX 960 OC Edition 2GB-GDDR5. Staying air cooled, This will be mounted to one of the 3 case pillars.
Running on a PCIe cable. The TURBO GTX 960 with the exhaust out the bottom of the case,
And the intake for the TURBO GTX 960 will come from the pillar it is mounted to.
CPU: 4690k
RAM: ?
PSU: Still needed, Will be mounted in the base.
Water Cooling, One custom 60mm x 400mm res. (3x 120 slim rads, CPU block, 1x Pump, fittings.) ( 6x90mm W 20x20mm H,D clear blocks running 9x5mm Round 500mm L tubing.
that will be on the out side of the case as part of the loop. being built ATM)
Lighting: Black Light, and some white LED's.
Fluid: Green.
Loop fittings:






To start off with im doing the out side water blocks/res there will be 6 in all three at the top and three at the bottom. All 6 will be part of the cooling loop.

They will be fitted to the out side of the case, The three on top will be linked the one's on the bottom. So one top one will link to one bottom one, with 3x 5mm clear tubes and so on. on the back of each block will be one fitting that go's to a stand 1/2 mantel bent loop. back to one of the other blocks and keeps going. Lets just call the outer blocks (Loop rails.)

So below I have started a quick step by step.
for the blocks, after ill be adding the 3x 5mm tubes to the 2x blocks to make one (Loop Rail.) and this will be done 3 times.

http://i.imgur.com/NvcSAfu.jpg

http://i.imgur.com/8dgv1Qw.jpg

http://i.imgur.com/BtC7nqF.jpg

http://i.imgur.com/HvdI2qI.jpg

http://i.imgur.com/vs7dRSf.jpg

Working on the Motherboard armor and the back plate IO shield that will lock onto the Motherboard armor, Still need to make a hole for the CPU. but still not sure what CPU block will be used.


http://i.imgur.com/ALm4Biw.jpg

http://i.imgur.com/H4lWRm7.jpg

http://i.imgur.com/oEiGobF.jpg

http://i.imgur.com/x1tYwps.jpg
http://i.imgur.com/UNrGAwJ.jpg

http://i.imgur.com/TQnAZ7l.jpg
http://i.imgur.com/2ngjOPx.jpg

http://i.imgur.com/R4YX16z.jpg

here I have started working on the center res mount. So far I have made the casing, added some blue LED's, put some steel mesh around it. Still need to add a small electric motor to turn the black cover at the bottom. to create a rotation of light in side the case. Once that is done i will starting working on the rest of the res mount. And then add the rest of the trimmings.

http://i.imgur.com/LEAfDMH.jpg

http://i.imgur.com/JdCZhO5.jpg

http://i.imgur.com/Synl8IV.jpg

http://i.imgur.com/KCyZt2N.jpg

Sorry about playing info catch up. I post the photos now and fill in the "blank"s soon.

http://i.imgur.com/eueKSfj.jpg

"blank"

http://i.imgur.com/i0Cj3Dk.jpg

"blank"

http://i.imgur.com/DOmZD1y.jpg

"blank"

http://i.imgur.com/u0SEVjO.jpg

http://i.imgur.com/jgiOV8O.jpg

http://i.imgur.com/ceWCMRS.jpg

"blank"

http://i.imgur.com/Ycm8nqa.jpg

http://i.imgur.com/xIrULoY.jpg

http://i.imgur.com/n3ar1M3.jpg

http://i.imgur.com/x89v9xV.jpg

"blank"

http://i.imgur.com/n3jN3nh.jpg

http://i.imgur.com/XgXgGN9.jpg

http://i.imgur.com/aWvimPf.jpg

http://i.imgur.com/zyQaTGV.jpg

http://i.imgur.com/OR9iG5e.jpg

"blank"

http://i.imgur.com/x98zkQt.jpg

http://i.imgur.com/fIkQMzG.jpg

Thanks for stopping by.

Cheers, Ken.

[OvRiDe]

I have a feeling I am going to really like this.

[Airbozo]

Great start Ken!

[Zenator]

As always, Thanks for your support Guys, :)

[Zenator]

Hi here are some more Photo's, Will have some more again in a day or so.

Outer Loop tubing.
http://i.imgur.com/W5l88Il.jpg

GPU from the out side of the case, will have mesh over the face. and a filter that slides in from the side.
http://i.imgur.com/wm5DQ8e.jpg
http://i.imgur.com/nMQzc6c.jpg

Inside the case,
http://i.imgur.com/CXg9aFi.jpg
http://i.imgur.com/M30HpN7.jpg

I have made 3 mounts to hold the center Res Light, And to strengthen up the case a bit more. One of then needed to be change to work with the GPU space.
http://i.imgur.com/Shq3tb8.jpg
http://i.imgur.com/lmB8Zw4.jpg

My work shop or should I say my Wife's dining table. She loves ME! :)
http://i.imgur.com/dZzY7TF.jpg

The bottom of the case with PSU filter.
http://i.imgur.com/gbYTH6u.jpg
http://i.imgur.com/oxFLdIF.jpg

Again thank you for stopping by. more again soon.

Cheers, Ken.

[OvRiDe]

Yep.. I DEFINITELY like this!! You had me a remote mounted video card!

Beautiful work.

[Zenator]

Thanks OvRiDe. Now I have you hooked, I just need to reel you in with the rest of the build, ;)

[Zenator]

Hello again.

Today I fitted a flow indicator into one of the back pillars so it cans be seen from the inside of the case, I also added 2 micro switchers to the bottom front of the case, One switch has a green LED, and the other is blue, One switch will be for the power and the other will be the reset, the blue LED will be the HDD drive light, and the green will be the power light.

http://i.imgur.com/uHi0fg1.jpg


http://i.imgur.com/SAImWGM.jpg


Thanks again for stopping by and following the build. :)

[Zenator]

Hi All

The I-beam has been test fitted, here are some photo's of where they are going.

http://i.imgur.com/ONZiRgC.jpg
http://i.imgur.com/X7hobTZ.jpg
http://i.imgur.com/0f8yNsX.jpg


What do you think ?

Thanks for stopping by. :)

Cheers, Ken.

[Zenator]

Hello again everyone, Just a small update I have made a dust filter for the GPU as well, That slides out for the side of the pillar for cleaning. And added the mesh. I have done more to the GPU mount. But will have some updates on the weekend.

I have also change the logo it needed redoing the old one was bugging the crap out of me, and the new logo can now be easily made on a CNC or laser cutter if need be.:)

http://i280.photobucket.com/albums/kk174/Zenator_art/20151029_180403_zpsbg4bflrx.jpg (http://s280.photobucket.com/user/Zenator_art/media/20151029_180403_zpsbg4bflrx.jpg.html)

http://i280.photobucket.com/albums/kk174/Zenator_art/20151029_180428_zpsdc3sdrek.jpg (http://s280.photobucket.com/user/Zenator_art/media/20151029_180428_zpsdc3sdrek.jpg.html)

http://i280.photobucket.com/albums/kk174/Zenator_art/20151029_180333_zpsycxdlgfo.jpg (http://s280.photobucket.com/user/Zenator_art/media/20151029_180333_zpsycxdlgfo.jpg.html)

http://i280.photobucket.com/albums/kk174/Zenator_art/20151029_180323_zpsf3xcsoda.jpg (http://s280.photobucket.com/user/Zenator_art/media/20151029_180323_zpsf3xcsoda.jpg.html)


Thanks for stopping by.

[OvRiDe]

Awesome! nuff said!

[Zenator]

Awesome! nuff said!

Cheers, :D

[Zenator]

Hello Again,

Still progressing on the Power Cell. I have been adding more details to the outer rims of the case, Still a lot more to do there. I have now also added the lower I-beam arms. As well as the outlet for the GPU. I will be doing all the side covers for the top and bottom base over the next week. Getting much closer to having it ready for paint.

http://i.imgur.com/DoO46YQ.jpg

http://i.imgur.com/UOxVu1k.jpg

http://i.imgur.com/lpMNmSe.jpg

http://i.imgur.com/j1ZZUvO.jpg

http://i.imgur.com/dKeLshL.jpg

http://i.imgur.com/PGf6Jhu.jpg

Thanks again for stopping by.

[Zenator]

Hello again.

Starting to add some lighting to parts of the case. before I start looking at the painting things I need to make sure it's all working and fits. And once all the painting is done. I will fit all the light FX to it again.

This bit is for any one that likes playing with electronics. I have not done this for some time my self. But it's time to do some soldering again. The top dish of the case will have a ring around the outside edge. The plastic around the outside is a translucent white. So the light can be seen the rest of the case is made of a solid white, and will be backed with black paint. This part of the case will pulsate with light behind it.

http://i280.photobucket.com/albums/kk174/Zenator_art/Mobile%20Uploads/20151106_191958_zpsshzvtgbe.jpg (http://s280.photobucket.com/user/Zenator_art/media/Mobile%20Uploads/20151106_191958_zpsshzvtgbe.jpg.html)

LED string,
http://i280.photobucket.com/albums/kk174/Zenator_art/Mobile%20Uploads/20151106_192015_zps04yqed3s.jpg (http://s280.photobucket.com/user/Zenator_art/media/Mobile%20Uploads/20151106_192015_zps04yqed3s.jpg.html)

Jaycar kit.
http://i280.photobucket.com/albums/kk174/Zenator_art/Mobile%20Uploads/20151106_192048_zpspeeu29sy.jpg (http://s280.photobucket.com/user/Zenator_art/media/Mobile%20Uploads/20151106_192048_zpspeeu29sy.jpg.html)

http://i280.photobucket.com/albums/kk174/Zenator_art/Mobile%20Uploads/20151106_192123_zps8r8z8gff.jpg (http://s280.photobucket.com/user/Zenator_art/media/Mobile%20Uploads/20151106_192123_zps8r8z8gff.jpg.html)


Thanks again for stopping by.

[OvRiDe]

Interesting kit. Looks pretty straight forward, with Arduino Nano and Pro Mini's going so cheap on eBay, I am used to seeing people use them for these kind of projects. Looking forward to seeing how this works out.

Very nice work as usual.

[Zenator]

Interesting kit. Looks pretty straight forward, with Arduino Nano and Pro Mini's going so cheap on eBay, I am used to seeing people use them for these kind of projects. Looking forward to seeing how this works out.

Very nice work as usual.


Hi OvRiDe I'm still old school, I'm so old I did not even know about the Arduino Nano, But thanks to you I do now. My wife is going to hate me.


looks like I'm not going to be using the Jay-car kit after all. Being that I'm real old and way out of date. Arduino Nano looks better for what i want to do. and with some work. can run lots of light. doing all kinds of things. So I guess all be trying that instead. something new for me to work out. I have to do some how to research on how it all work now, I do have some normal LED strips that I might use instead to make it more even. Thanks OvRiDe.

[OvRiDe]

Welcome to the world of Arduino! There is so much that you can do with just a little electronics knowledge and a little coding knowledge. From controlling LEDs, Servos, Relays to measuring sensors such as voltage, temperature, humidity, it is truly a versatile bit of kit. You might look into the WS2811 and WS2812 LED strips/modules (aka Neopixels) as well. Individually addressable and RGB strips, sticks, pixels, etc etc... Here is an example of what I built for Halloween with a Arduino Pro Mini, 2 8 LED pixel sticks, and a USB 5V charger...


https://www.youtube.com/watch?v=0-h1FVmlkYM

[Zenator]

Power Cell Light test.


https://youtu.be/6Dz2klZAq3o

[Zenator]

Welcome to the world of Arduino! There is so much that you can do with just a little electronics knowledge and a little coding knowledge. From controlling LEDs, Servos, Relays to measuring sensors such as voltage, temperature, humidity, it is truly a versatile bit of kit. You might look into the WS2811 and WS2812 LED strips/modules (aka Neopixels) as well. Individually addressable and RGB strips, sticks, pixels, etc etc... Here is an example of what I built for Halloween with a Arduino Pro Mini, 2 8 LED pixel sticks, and a USB 5V charger...


Nice work that looks cool. :up:

[OvRiDe]

Power Cell Light test.


https://youtu.be/6Dz2klZAq3o

Must have more information! :) Is that using an Arduino?


Nice work that looks cool. :up:

Thank you.

[Zenator]

Must have more information! :) Is that using an Arduino?



Thank you.



No just using a normal RGB LED kit. Because of the time frame I have on the build I had to find a quick fix. But im still looking into the Arduino Kits, There is just so much that can be done with them, I just don't have the time to learn how to just yet. But I do plan to have a go. The Shop just down the road from me sells lots and lots of the Arduino kits and add-on's. Now I know about it I will give it a try. and see what I can do with it. Im very keen to learn about the Arduino stuff now.

[OvRiDe]

I thought that was a pretty fast switch! It looks fantastic, very nice touch!

[Zenator]

I thought that was a pretty fast switch! It looks fantastic, very nice touch!


Thanks, OvRiDe. :)

[Zenator]

Hello again time for a new update,

Below is the curving process I used to get the sides done, I placed the inside a thin sheet of alloy that will hold the curve that's needed and heat it up with a heat gun till it forms the same shape then let it cool. After this I have cut a window out and added mesh to it. Still work in progress.

http://i.imgur.com/oAPbZmo.jpg

http://i.imgur.com/p3TYYkr.jpg

http://i.imgur.com/Mdp94x4.jpg

http://i.imgur.com/mi4gAu5.jpg

http://i.imgur.com/pAmVDHV.jpg




I have also fitted a HX1000i PSU.

http://i.imgur.com/TeYnxtU.jpg

http://i.imgur.com/3poUc8g.jpg

Finished the front Start/reset.

http://i.imgur.com/IS7pev0.jpg


The MoBo armor cover is now done as well.

http://i.imgur.com/jrcMHv7.jpg
http://i.imgur.com/W1J1HnU.jpg
http://i.imgur.com/EaXprYg.jpg


Hear is the Colour theme I'm going to be doing on the out side of the case.

http://i.imgur.com/YtWnQsh.jpg


Thanks again for stopping by. :)

[Zenator]

Hello again everyone.

Time again for some more photo's :)

The outside of the case is almost done. just need to make the side panels and add some more details to the top disk as well as the pillars and then paint it all. then wire it all up. And start on the inner loop.

http://i.imgur.com/wuiNDsN.jpg

http://i.imgur.com/TcDokqj.jpg




I have added a water temp gauge below as well as a mount to see it better. It could just be me and this was by no means what it had intended my son told me it looks a bit like a storm trooper face.I don't think so my self so ill let you decide on that one.
http://i.imgur.com/MXJ8ATN.jpg


Here I have added some black light LED's 5mm ones,

I have added some 3mm Black light LED's to the CPU block as well.

http://i.imgur.com/fPvQseL.jpg




I have also been working on a cover to the center res, that will let me hide some more black lights.
http://i.imgur.com/ajFoGRd.jpg

http://i.imgur.com/JxZxpSf.jpg





One big change is going to be the center res, I'm changing the it around to show it more as part of the loop.. And it has nothing to do with the fact that it will work better this way. with out adding a second res to the loop.

http://i.imgur.com/y18hhfc.jpg


Any ways this is where I'm up to at the moment. Hope you are all still as eager as I am to see it all completed.

As always thanks for stopping by. :D

[Zenator]

Hello again.

Mid week update, My first ever I think.

I have been working on the GPU, making a way for the heat to be removed to the outside of the case. As well as making a way to to trap the heat from entering the inside of the case. and still have a way to connect a monitor to the GPU with out letting the heat in. So what I have done is make a cover that will do both, and then I will make one more to cover the monitor cable plug to hide it as well.

http://i.imgur.com/jQuBn0t.jpg

http://i.imgur.com/xDoDw90.jpg

I will also be making a cover to hide the PCI-e cable on the GPU.



So this is what will be going on behind the GPU to get the Hot air out. this will also stop the PCI-e cable from getting in the way as well. that will run from the top down into the bottom of the case and back up to the MoBo.

Then the pillar face cover will go back over the top. so non of it will be seen.


http://i.imgur.com/pu3hAgq.jpg
Also in the last photo. you can see just a small notch in the center that's where the hdmi will run into the bottom of the case and out the back near the IO port. did not think to say anything about it. as It was the quickest thing to fit. :P


Thanks for stopping by.

[OvRiDe]

Magnificent!

[Zenator]

Magnificent!


Cheers, But wait there is more.


Hello again.


Today I painted the Cover for the GPU that I made. Now it looks like it belongs to the GPU cover.




All the gaps have been filled, then primed in a single pack.
http://i.imgur.com/XJGQvKu.jpg




I then painted it in a white acrylic single pack then sanded with 600 wet&dry paper.
I then added the red line. And then painted it in a 2 pack clear coat.



http://i.imgur.com/WYVlRxe.jpg

http://i.imgur.com/VtWNLll.jpg

http://i.imgur.com/yRx3CBJ.jpg




This photo is out of focus but not on the fan and light above. Nice and flat and Shiny.
http://i.imgur.com/F62wwv0.jpg

Thanks for stopping by.

[Zenator]

Hello again,

Over the last day or so I have been putting the outside loop and blocks together,

http://i.imgur.com/LJEcjof.jpg

http://i.imgur.com/vJyXPYR.jpg

http://i.imgur.com/Binpmwl.jpg



I glued then from the inside & out.
And there are no leeks from any of the tubing, Happy days.



http://i.imgur.com/1In4itu.jpg

http://i.imgur.com/o2Uqxsw.jpg

http://i.imgur.com/AuaI2wU.jpg

http://i.imgur.com/E5xGuJk.jpg



Leek testing, and this one had one. I filled then all up with water. added a plug to one end, added some air pressure to the other end to make sure they will work.



http://i.imgur.com/uWJ1CaG.jpg

I modded the SSD as well I know its been done before but it still looks cool. and I have never tried it before so I just had to give it a go,

The PCB had to be flipped over for the ram to be seen. and I put some 1mm clear behind the window.

http://i.imgur.com/RtdINPX.jpg

http://i.imgur.com/sNWXoKm.jpg

http://i.imgur.com/ZXLbh7z.jpg


http://i.imgur.com/gePMRz4.jpg

Thanks again for stopping by.

[TheMainMan]

Love the way this is coming together, this is one slick build!

[Zenator]

Love the way this is coming together, this is one slick build!

Cheers, mate. :D

[Zenator]

Hello Again, The painting process is under way. Enjoy!

http://i.imgur.com/uKOPanF.jpg

http://i.imgur.com/jztSdkp.jpg

http://i.imgur.com/JhesFFc.jpg

http://i.imgur.com/kcgqasa.jpg

http://i.imgur.com/uGYyFUj.jpg

http://i.imgur.com/NOhDr7x.jpg

Thanks for stopping by. :D

[msmrx57]

Really coming together nicely. :up:

[Zenator]

Really coming together nicely. :up:

Thanks msmrx57, :)

[Zenator]

Small update!

http://i.imgur.com/IBvFWYi.jpg


Thanks for stopping by.

[Zenator]

Hello again,


Progress has been slow but I have fitting the rads a fans, GPU, Mobo, PSU, and are now there to stay. I have added the same shapes to the inside of the pillars that can be seen on the outside but the ones on the inside will glow white when lit with black light. and the white of the pillars wont.
Have to get more soft tube as well don't have enough to the bottom of the loop. Going to start the inside loop over the next week. And I'm still painting the case as I go.

In this photo on the right you will see the clear cover that will be going over the 3x3 loops that will be running up and down the outside of the case. A the ASUS logo that has been sprayed on all 3 sides.

http://i.imgur.com/b9nKEtc.jpg
http://i.imgur.com/2Cp5XQx.jpg

Here is a front shot of the clear cover.
http://i.imgur.com/tr5Rwbw.jpg
http://i.imgur.com/Yr9zkfM.jpg


Here you can see the tiles that will glow white under black light this is done on the inside of all 3 pillars and the bottom.
http://i.imgur.com/I6OUBOv.jpg
http://i.imgur.com/NCgrFkj.jpg

GPU is now all done PCI-e extender or riser is now fitted as well.

http://i.imgur.com/wpFOiGV.jpg
http://i.imgur.com/KpfW3lS.jpg
http://i.imgur.com/thDqSUq.jpg



Here I have made a cover to hide the PCI-e extender.
http://i.imgur.com/aeFtTpN.jpg
http://i.imgur.com/7fDVQlM.jpg
http://i.imgur.com/shLUhVd.jpg

I run the HDMI and Display feed out the back of the case, And can still removed, but for now will be staying for testing later.
http://i.imgur.com/gHrRCBC.jpg



Not a lot of work space here and the nest inside will need some work.
http://i.imgur.com/0EKdrtI.jpg


SSD is now fitted as well.
http://i.imgur.com/vU6GRFt.jpg
I will keep the updates coming as the painting starts to change the look. Most of the painting I have left will be done with the airbrush. and paintbrush.


Once again that's all for now, Thanks again for stopping by.

Cheers, Ken.

[Zenator]

Last update till completed.

http://i.imgur.com/hHJsjCT.jpg

http://i.imgur.com/cUEgheK.jpg

http://i.imgur.com/uk5JVbN.jpg

Thanks for stopping by.

[Zenator]

Hi All, One last small update till completed.

http://i.imgur.com/BSaLUHo.jpg

http://i.imgur.com/8RYAWJf.jpg




Thanks again for stopping by, More Soon.

[Zenator]

Some better pic's this time. The camera on my phone makes things look to have too much colour. The pic's below are true to the look of the case.

Hope you all like.

http://i.imgur.com/Av2nHTJ.jpg

http://i.imgur.com/GFy3cqE.jpg

http://i.imgur.com/znl7led.jpg

http://i.imgur.com/9OG5474.jpg

http://i.imgur.com/9TH4VVs.jpg

http://i.imgur.com/oJIo8Wd.jpg

http://i.imgur.com/eJigUcs.jpg

Thanks again for stopping by. will post finale photos as soon as I can.

Cheers Ken.

[OvRiDe]

Awesome work. This looks amazing. Love all the details, the textures, and the form. Just overall a very cool build, and looking forward to the final pictures.

[msmrx57]

:stupid: The weathering/aging is amazing. I love the form and openness of the build overall.

[Zenator]

Cheers Guys. :D

[Zenator]

Temp tests all stock settings. Over clock results soon.

http://i.imgur.com/NOt3fny.jpg

Link: http://i.imgur.com/NOt3fny.jpg

http://i.imgur.com/9LP1dA8.jpg

Link: http://i.imgur.com/9LP1dA8.jpg

Room temp 25c

@ idle
Loop temp 26c
MoBo temp 26c
GPU temp 27c

Max GPU temp under load 49c
CPU max test ? still to come.

Cheers, Ken.

[Zenator]

CPU temp testing done.

3dmark CPU overclocked to 4.299. from 3.500. I"m not a over-clocker so not sure how much better that score is. In fact this is the fist time Ive relay tried to do a proper over clock.

http://i.imgur.com/lwF6SkW.jpg

Link: http://i.imgur.com/lwF6SkW.jpg

http://i.imgur.com/oU4exMg.jpg

Link: http://i.imgur.com/oU4exMg.jpg

CPU temps. at Max running Maxload.

Room temp at the time was 29c
Loop temp was 29c
Max CPU temp 36c
MoBo Temp 31c
If any one know of a better CPU test please let me know.

http://i.imgur.com/o9duPWR.jpg

Link: http://i.imgur.com/o9duPWR.jpg


Auto set for Fallout 4 below.

http://i.imgur.com/Gdgrnfm.jpg

Running Fraps.

http://i.imgur.com/xRt0ziD.png

http://i.imgur.com/M7u7w5j.png

http://i.imgur.com/dkNJLqB.png


Hope you all like the temps. As I sad not sure if there any good, Still all very new to me.

Still working on getting finale photos, waiting on a friend with a good camera to take pic's.

Thanks again for stopping by. :)

[M!ST!CX]

This is so sick, amazing job :)

[Zenator]

Hello again. Here are the final photo's could not get someone to take photo's for me so had a go my self enjoy. :)

http://i.imgur.com/If98XIn.jpg


http://i.imgur.com/1PVeNki.jpg


http://i.imgur.com/iQ9qxAp.jpg


http://i.imgur.com/kOq9bTH.jpg


http://i.imgur.com/NMgYcGu.jpg


http://i.imgur.com/RypGleA.jpg


http://i.imgur.com/ZeDCFBz.jpg


http://i.imgur.com/zGvp3wW.jpg


http://i.imgur.com/VulmMn8.jpg


http://i.imgur.com/lI0qqq0.jpg


http://i.imgur.com/rUt6EFa.jpg


http://i.imgur.com/mhjsgMK.jpg


http://i.imgur.com/rJX1tIv.jpg


http://i.imgur.com/QTULRQu.jpg


http://i.imgur.com/Lp4Bek5.jpg


http://i.imgur.com/QXSSR8C.jpg


http://i.imgur.com/qf4SJnI.jpg


http://i.imgur.com/3MYym2g.jpg


http://i.imgur.com/7FBHrWo.jpg


http://i.imgur.com/wqXCYK3.jpg

And one in the dark. With pretty colors. that did not work out so well.
http://i.imgur.com/L6hH1yR.jpg


Thanks again for following this build and for all your feed back.

Cheers, Ken.

[Zenator]

One last photo's of the build.

http://i.imgur.com/o0HZGYh.jpg

http://i.imgur.com/xUvvbip.jpg



Thanks for stopping by. :)

[OvRiDe]

Beautiful work! At first I thought the green fluid didn't look right, but the more I look at the photos, it really makes it pop. I really like the last photos, very cool.

Congrats on another very nice build!

[Zenator]

Beautiful work! At first I thought the green fluid didn't look right, but the more I look at the photos, it really makes it pop. I really like the last photos, very cool.

Congrats on another very nice build!


Thanks again OvRiDe, :D I hope my next one will live up to the last two builds. :)

[crenn]

Damn that's a nice build! Also, another aussie detected :P

[Zenator]

Damn that's a nice build! Also, another aussie detected :P

Cheers, Crenn. Oh yes all Aussie. :blivnk:

[msmrx57]

Absolutely AWESOME!!! I've got nothing else to say. :bowdown:

[Zenator]

Thanks so much msmrx57, :D

[Zenator]

ASUS Australia 2016 PC Water Cooling Event in Sydney.
Fallout 4 and the Power Cell shown in video as well as mods from Simple Modz / GGF Lan Party / Oz Modz, From the AUS ASUS modding team.


https://www.facebook.com/ZenModz-1602842656630513/


https://www.youtube.com/watch?v=7k1cFs3QksQ