Project: DOOM - ZenModz

[Zenator]

http://i.imgur.com/0WQbQR3.jpg




Hello again.


A build based on the new DOOM game.

This Build will be entered in the Cooler Master world series Case mod.

Intro:

With this build I'm not going to try and better or match any other past doom builds,

I'm just going to give my own style of the new Doom game how I see it and the only way I know how, And that is to mod the crap out of it. I hope you enjoy the ride. This build only has a 8 week life span as it must be done before the last day for entering the Cooler master world series. So I have a real lot of work to do to get it done in time.

Before we get started I would like to thank all my new sponsors for believing in me, And for all your support you have given for this new build,. It means a lot to me.

To start off here is some of the coolest gear from Cooler Master.
Pun intended. :D




http://i.imgur.com/15buNbq.jpg





The Master Pro 5 case that will be used in this build, as well as the CM 850 PSU,
CM Silencio FP 120 PWM fans, And to top it off I will be painting a CM STORM MECH Keyboard to match the Master Pro 5 case.

I will go into more detail for each item as the build moves along.

To start of some photo, of the work I have done so far over the last week.

MR creepy well that what I call him. and for some strange reason no one I know like the look of him. not sure why.


He started off as two blocks of sign foam and glued together with a thin layer of body filler. and a rough drawing of where I think things go.




The entire build will be done all by hand or hand tools. no 3d printing or any cnc used.

http://i.imgur.com/gQ0FzAs.jpg


Next the dremel come out to play. and some 120 grit sand paper.

http://i.imgur.com/gyHYGDj.jpg


http://i.imgur.com/zxU7BwL.jpg


http://i.imgur.com/b0GKb6l.jpg

http://i.imgur.com/F01fJli.jpg

http://i.imgur.com/ezUK9DR.jpg

http://i.imgur.com/jky2urt.jpg

So far so good. ?


Next is the Clay. Oh god now what, I'm thinking to my self! where to start ? Let me just say this is the first time I have tried doing some thing like this so it took some thinking before adding the clay.

I used ping pong balls for the eyes as they looked close to the eyes so thats what i used.

http://i.imgur.com/ja70xvH.jpg

http://i.imgur.com/tiOaR30.jpg

I have also started adding the space for the teeth which after doing all the top ones, i found that they where all to wide so later one I re-did them.

http://i.imgur.com/J48SD9V.jpg

[Zenator]

And here are some more photos.


Started adding some pins for the teeth. as well as the center bones for the eye brows

http://i.imgur.com/BwyWFQL.jpg



And here the inside of the bottom jaw.

Now the holes for the teeth on the bottom jaw.



http://i.imgur.com/pkAKsCA.jpg



Here I have cut the bottom jaw out to make it easier to work on.

http://i.imgur.com/7x1VJ8F.jpg




More pins, And look his first tooth how cute.

http://i.imgur.com/5xbzAPg.jpg

That soon changed. :Paranoid:

http://i.imgur.com/uJZXx6r.jpg


And then there where more.

http://i.imgur.com/EQqVDSv.jpg

[Zenator]

http://i.imgur.com/hbZPVLX.jpg

Remember what I was saying about the top teeth holes fix now.

http://i.imgur.com/VzsV5I7.jpg

http://i.imgur.com/CHuoVY2.jpg

http://i.imgur.com/VUkLuoG.jpg

http://i.imgur.com/gbYw0bc.jpg

http://i.imgur.com/Nwhw45q.jpg

http://i.imgur.com/6ENKXBx.jpg

http://i.imgur.com/9CFDqj9.jpg

http://i.imgur.com/i2Gw2b7.jpg



starting to add more detail now. and have fitted the bottom teeth back.

http://i.imgur.com/pFgAtli.jpg




Here I'm adding the gums hanging off. Should look good when painted.

http://i.imgur.com/UONxawA.jpg

http://i.imgur.com/l8Xh9Yd.jpg

http://i.imgur.com/8Q64ijh.jpg

http://i.imgur.com/Ptahq4u.jpg

http://i.imgur.com/3XbmKBu.jpg

[Zenator]

Case Striped down to be painted.

http://i.imgur.com/vKQAJr5.jpg

http://i.imgur.com/q9JqPAE.jpg

http://i.imgur.com/6RoKFMf.jpg

http://i.imgur.com/tSxvbjk.jpg

http://i.imgur.com/BPeeJC1.jpg

http://i.imgur.com/VpMKj48.jpg

http://i.imgur.com/64iv1dE.jpg




And back into shape.

http://i.imgur.com/Wd7b6zs.jpg

http://i.imgur.com/IbBdgqo.jpg

That all for now more again real soon.


Thanks for stopping by.

[Zenator]

Keeping it going.*

Some mesh for the hand that I'm going to start making.
http://i.imgur.com/zIVVtL7.jpg

Starting to cover the mesh and added the wire for the fingers.*
http://i.imgur.com/RZl6VtT.jpg

Added the bends for the fingers.*
http://i.imgur.com/ZBAO2Ag.jpg*
http://i.imgur.com/qcHGfoo.jpg

More on that later on for now back to the skull.*
I added *a drip what should look like blood dripping once painted.
http://i.imgur.com/BjWSEIZ.jpg
http://i.imgur.com/iM3DAIT.jpg

What I have done next is sprayed the skull in some high-fill 2K primmer when dry I will sand with 600 grit paper. and then I will paint the skull Bone white.
http://i.imgur.com/bWBWwwn.jpg
http://i.imgur.com/OGt1v0B.jpg
http://i.imgur.com/H6fREnY.jpg
http://i.imgur.com/eEZyaNG.jpg
Now dry enough for sanding.*
http://i.imgur.com/s5ooK6I.jpg*

http://i.imgur.com/ltp8WDy.jpg


Thanks again for stopping by.
More again soon.

[Zenator]

If I only know how much fun this was before. I would have been doing this years ago. Hope you all like it so far.


http://i.imgur.com/voqmzHG.jpg


Thanks for stopping by!

[OvRiDe]

That is insane! Very nice work, looking forward to seeing how this turns out.

[msmrx57]

HOLY CARP!!!!!! That skull!!! :bowdown: This is going to be EPIC!!

[Zenator]

Cheers Guys :)

[Oneslowz28]

It's been a very long time since a Doom project of this caliber graced this forum, and so far I can say that I am highly impressed! I will be checking back regularly. Awesome work!

[Zenator]

It's been a very long time since a Doom project of this caliber graced this forum, and so far I can say that I am highly impressed! I will be checking back regularly. Awesome work!


Thank you Oneslowz28, Wow your the Chief. :bowdown: I hope you like the next photos.


The hand is all most done, then just needs painting.

http://i.imgur.com/qNYRN84.jpg

http://i.imgur.com/uIcInKz.jpg



Thanks again for stopping by.

[Zenator]

Hi

Got some of the painting done today mostly the skin and nails on the hand.
and will do the rest in the morning.

http://i.imgur.com/ePzswM7.jpg


Thanks again for stopping by.

[OvRiDe]

SHUT THE FRONT DOOR... No no no no .. just stop.. I can't take it....

[Zenator]

Hand is done.

http://i.imgur.com/lYvwdzm.jpg

http://i.imgur.com/mR20vLb.jpg

http://i.imgur.com/MNoX5t5.jpg



Now back to the skull.


Thanks for stopping by.

[Zenator]

Don't look if your skittish around blood.

http://i.imgur.com/pMjmO45.jpg

http://i.imgur.com/QeuGYlA.jpg

http://i.imgur.com/6DQ2Zxy.jpg

http://i.imgur.com/1ZcHXlV.jpg


That's all for now,



Thanks for stopping by.

[TheMainMan]

Glad I looked at this before lunch! The detail on these pieces is quite convincing and definitely captures the right feeling for Doom. Well done!

[Zenator]

Glad I looked at this before lunch! The detail on these pieces is quite convincing and definitely captures the right feeling for Doom. Well done!


Thank you much appreciated :)

[Zenator]

Hello again.


Not giving to much away on the case ATM. But it is well under way.

http://i.imgur.com/VqBu2pi.jpg

if anyone wants to know how the can it still be opened I'm making it so all the panels can still be removed.

http://i.imgur.com/JAo23n7.jpg


To start the ball rolling here is the Mobo process.

The Mother Board going into the Doom build is the ASUS Sabertooth X99 2011-3

The link can be found here : https://www.asus.com/au/Motherboards/SABERTOOTH_X99/

I think a very cool looking Mobo to start with for the Doom case. and should work well with the theme with it's armor plate cover.

http://i.imgur.com/YozNCwp.jpg


What I like most about this Mobo is all the extra bits that come with it like the PCI-e covers and a plug for every thing plus a fan that can be add to the Mobo for some better cooling that I'm going to be using.

http://i.imgur.com/1Mv90pB.jpg


Plus you get 4 ram bank fillers to hide the empty ram slots. as well as 3 thermal sensors that plug into the Mobo.

So to start off I have removed the Armor to get it ready for it to be painted in silver.

http://i.imgur.com/2Ir89r0.jpg


Ok here come all the PC goodness so I wont do much more talking as I know most of you will just look at the pretty photo's


All Silver. :)

http://i.imgur.com/pdgqoMl.jpg

http://i.imgur.com/LJcVrmP.jpg




Adding a small amount of yellow. more yellow will be added to the inside of the case later.

http://i.imgur.com/9FMC8EB.jpg







Here I also repainted the text onto the hole mobo. to make it all stand out.

http://i.imgur.com/wS1c3OR.jpg



For the next photo's I have done a small amount of weathering on the Mobo.



http://i.imgur.com/ecNahDy.jpg

http://i.imgur.com/7FcWa89.jpg

http://i.imgur.com/hnI7rG2.jpg

http://i.imgur.com/EZRM8vT.jpg






Thanks to Cooler Master and AVEXIR I get to use some sweet looking BLITZ Series AVEXIR Ram. You just have to love how good there ram looks.:D

http://i.imgur.com/NE14cYv.jpg


But I'm still going to mod it just a bit. to work in with the look of the Mobo.

Black.

http://i.imgur.com/ekXMjYe.jpg

Now silver.

http://i.imgur.com/7WjLQ00.jpg


And now even sexier then before.

http://i.imgur.com/SldCxKr.jpg

http://i.imgur.com/hAQU7fA.jpg

http://i.imgur.com/k2Qtn8K.jpg

http://i.imgur.com/AuAo8ee.jpg


Here is the Mobo completed :P


http://i.imgur.com/vzUA4Kc.jpg

http://i.imgur.com/qbbc0wm.jpg

http://i.imgur.com/7UxdNRz.jpg

http://i.imgur.com/vUUECwo.jpg

http://i.imgur.com/WnMGYrL.jpg

http://i.imgur.com/WkNflOM.jpg


That it for now, As always thanks for stopping by.

[Zenator]

Hello again.



First off for this week Cooler Master sent me some A cool t-shirt and a drink container for being part the the Cooler Master World Series. Thank you CM I will wear it with pride, :thumbup:

http://i.imgur.com/KcTNG4v.jpg






Sadly Ive been told I look bad in photos. What do you think ? I was Home Alone at the time. and was a bit scared when the flash went off :D


http://i.imgur.com/M5IO3aM.jpg


So the build is still moving along, I started off making a airlock door. and some rails for the inside and some other parts, then moved on to the case again.


http://i.imgur.com/O06oqDv.jpg

http://i.imgur.com/xRo7ike.jpg



The Rails relay suck to make. just my 2 sense worth. And yes I need to make more! :upset:

http://i.imgur.com/ZypcbF6.jpg

All of this build is hand made, cut out mostly with a sharp blade and other hand tools.

http://i.imgur.com/d5Ft7rQ.jpg

http://i.imgur.com/TMApLD4.jpg

http://i.imgur.com/Ikl1ZNO.jpg





Still adding to the look of the case as I go. Below is where I'm up to so far.

http://i.imgur.com/51aszJd.jpg

http://i.imgur.com/ZihK0tZ.jpg

http://i.imgur.com/96Att8K.jpg


Some parts are being shaped with sign foam to make it a bit quicker.

http://i.imgur.com/KdpZQwu.jpg

http://i.imgur.com/gLAw1Q5.jpg

http://i.imgur.com/NUaWgGc.jpg

http://i.imgur.com/jEmwn40.jpg

That's about it for now. I'm waiting for the water cooling gear from Bitspower to arrive then I can start getting the inside up and going as well. :D

But for now I'm trying to get the outside all done, Not all that much more to go on the outside. just lots of small bits.


Again thanks for stopping by.

[Zenator]

Hello again.

Here are some more photos again hope you like them. :)

http://i.imgur.com/d0peCha.jpg

http://i.imgur.com/biBrDUD.jpg


elevator door.

http://i.imgur.com/Rz0chqN.jpg

http://i.imgur.com/DmIJWtx.jpg

elevator power box. and will light up.

http://i.imgur.com/9kYAz53.jpg

More elevator parts. this is the top cover.
http://i.imgur.com/Pl34KQI.jpg

http://i.imgur.com/Xz73MJ0.jpg

http://i.imgur.com/PTjZiSD.jpg

http://i.imgur.com/esHayod.jpg

And for the rest. Hope you like them :)

http://i.imgur.com/lyRvjFS.jpg

http://i.imgur.com/CRJMqF5.jpg

http://i.imgur.com/0voKhkB.jpg

http://i.imgur.com/FgP6xOY.jpg

http://i.imgur.com/rcnChKQ.jpg

http://i.imgur.com/wNVpN0q.jpg

http://i.imgur.com/jWslywl.jpg

http://i.imgur.com/wXzRejH.jpg

http://i.imgur.com/95oI0e6.jpg

http://i.imgur.com/YVaNWim.jpg


Still looking to add a vent here.
http://i.imgur.com/Y2TcO2o.jpg

http://i.imgur.com/fVAyI2t.jpg

http://i.imgur.com/IimbV68.jpg

http://i.imgur.com/Hos1O0n.jpg

http://i.imgur.com/tmX3WCG.jpg

http://i.imgur.com/pUQ6h1Q.jpg

Still lots more to do. and more to add to it as well, I hope you all like how it's coming together let me know what you think all feed back is welcome :)

Thanks again for stopping by. :)

[Zenator]

Hi everyone.

One update till Sunday.

http://i.imgur.com/kJHgZ7x.jpg


Thanks for stopping by.

[Airbozo]

Love it!

The power button needs something though. Maybe a bloody fingerprint or some rust, but something.

Outstanding work!

[Zenator]

Love it!

The power button needs something though. Maybe a bloody fingerprint or some rust, but something.

Outstanding work!

Thanks Airbozo, it will look better soon. :)



Doom PC still going strong,


Received some Very sweet looking cables from modGuru and made some small changes to them to match the inside of the build.

http://i.imgur.com/rDtYM4g.jpg

Added a grill the the top of the case.


http://i.imgur.com/hmKtTPY.jpg

http://i.imgur.com/LQCjijX.jpg

Now painted :)

http://i.imgur.com/9rtkoCm.jpg


I have also finished off the back side panel to help make it blend into the case.

http://i.imgur.com/yDhBYyi.jpg

http://i.imgur.com/EXAp4c8.jpg

http://i.imgur.com/dIhkKHB.jpg

http://i.imgur.com/RQAvB3e.jpg



After adding some more weathering to the side panel I think it now just works with the rest of the case.

http://i.imgur.com/qm08fHQ.jpg


Thanks Again for stopping by.

[Zenator]

Hi, It update time again and I'm sure some of you are keen to know what the inside of the Doom case is starting to look like, So say no more!

ASUS 970 GTX Being changed over to water. Thanks to Bitspower :)

http://i.imgur.com/LjviUtb.jpg

http://i.imgur.com/zdiXxYs.jpg

http://i.imgur.com/Oyo1YAC.jpg

Ok here is the photo's you been waiting for.

Tubing and floor plates for the case and GPU.I will still be adding more to the plates.

http://i.imgur.com/knOZkxU.jpg

2x140 Coolermaster fans get a new look for the top 280 rad.

http://i.imgur.com/tsFa4Ni.jpg

This should give you some idea as to the look of the inside of the Doom case. And before someone asks why there is one the tubes running across the center, When the side panel in on the pipe can be seen sitting just above the two top windows from the outside of the case. will add some photos of that tomorrow.



http://i.imgur.com/mIDjaEJ.jpg

http://i.imgur.com/UD2yaBS.jpg

http://i.imgur.com/QmojJHo.jpg

http://i.imgur.com/9GsD2Jn.jpg


Hope you all like it. Thanks again for stopping by.

[Airbozo]

Great update!

[Zenator]

Great update!

Thanks Airbozo. :)

[Zenator]

Hi Main Doom door, It's small for a door and need a bit more detailing but It's a Door. :) Plus I finished off part of the lift. and the side windows show some of the cooling inside.

http://i.imgur.com/KWXVtdc.jpg

http://i.imgur.com/ZCqx0jC.jpg

http://i.imgur.com/ZRIOMDh.jpg

http://i.imgur.com/XTV3E10.jpg

http://i.imgur.com/8l1z7IS.jpg




Thanks again for stopping by and having a look.

[msmrx57]

Wow!! This is really something special!! The attention to detail is incredible. :bowdown:

[Zenator]

Thanks msmrx57. :D

[Zenator]

Hi every one,


The Doom build is just about done, Just some small details to go.

Sadly there will be no cooling fluid added to the build for some time to come as I don't have a CPU for the build yet.

http://i.imgur.com/JyIRwBC.jpg

http://i.imgur.com/aRPQsy5.jpg

http://i.imgur.com/2eBRbp5.jpg

http://i.imgur.com/Dz1ep1C.jpg

http://i.imgur.com/di1Eiad.jpg

http://i.imgur.com/gblr1GR.jpg

http://i.imgur.com/XqSwQeb.jpg

http://i.imgur.com/VteBzYv.jpg

http://i.imgur.com/WBy9Le8.jpg

http://i.imgur.com/ZXVRbIF.jpg

Thanks again for stopping by.

[Zenator]

The DOOM Gore is set on extra High. 18+ only. Or if you have a weak stomach.:sick:;)


http://i.imgur.com/ftRMBog.jpg

http://i.imgur.com/GsmJeQV.jpg

http://i.imgur.com/1DRGy5K.jpg

http://i.imgur.com/BGYKTo7.jpg

http://i.imgur.com/rAGpYH8.jpg

http://i.imgur.com/i2h31uN.jpg

http://i.imgur.com/bLcV5XW.jpg

http://i.imgur.com/KqZiw0R.jpg

Only got till Sunday to have the rest of the build done. now I'm feeling :sick:

Thanks again for stopping by.

[Airbozo]

Nice touch.
A body part would look good sticking out of that last door... Crushed in the mechanism so to speak.

[Zenator]

Thanks Airbozo. :) working on something to that you might like.

[Airbozo]

Loving the detail. This project makes me want to break out my airbrush (never used it since I got it ten years ago...) and learn how to use it.

[Zenator]

Loving the detail. This project makes me want to break out my airbrush (never used it since I got it ten years ago...) and learn how to use it.


Thank you :) the build will be done soon, Just waiting for the CPU to arrive now so I can add the coolant to the loop. Then I can take some photos.

And get that airbrush out and start using it, You went and got one with some intent to use it. now's a good time. :)

[Zenator]

Hello

DOOM is done!

http://i.imgur.com/P1ivLST.jpg

http://i.imgur.com/VsIiGV0.jpg

http://i.imgur.com/s3ixBh0.jpg

http://i.imgur.com/Xn8l5ch.jpg

http://i.imgur.com/I4nLNPe.jpg

http://i.imgur.com/A60LBwh.jpg

http://i.imgur.com/lXeZ5mR.jpg

http://i.imgur.com/MyZKP0l.jpg

http://i.imgur.com/POP06vM.jpg

http://i.imgur.com/9znwi3Q.jpg

http://i.imgur.com/kBKoyFT.jpg

http://i.imgur.com/ZTgNdZf.jpg

http://i.imgur.com/anX3lDX.jpg

http://i.imgur.com/H6ch6BL.jpg

http://i.imgur.com/sjDPgH6.jpg

http://i.imgur.com/AB2DdTv.jpg

http://i.imgur.com/kN1wCPK.jpg

http://i.imgur.com/3BnbPvY.jpg

http://i.imgur.com/MqExqQd.jpg

http://i.imgur.com/w1Cb0I9.jpg

http://i.imgur.com/yohkmWW.jpg

http://i.imgur.com/Pf7q85h.jpg

http://i.imgur.com/GeILp3o.jpg

http://i.imgur.com/XYaPEaC.jpg

http://i.imgur.com/VkhGMDR.jpg

http://i.imgur.com/ebnSOO8.jpg

http://i.imgur.com/t8V7Z2U.jpg

http://i.imgur.com/7s98FwX.jpg

http://i.imgur.com/nj3yCYw.jpg

http://i.imgur.com/UNtnOp3.jpg

http://i.imgur.com/LDE5PSI.jpg

http://i.imgur.com/aP5KwlZ.jpg

http://i.imgur.com/kDqbGHS.jpg

http://i.imgur.com/kQSmURF.jpg

http://i.imgur.com/RsBniZY.jpg

http://i.imgur.com/TMfh0aw.jpg

http://i.imgur.com/ZnjQieA.jpg

http://i.imgur.com/F9f5ZN8.jpg

Hope some of you enjoyed the build, for me it was a lot of fun.

[Airbozo]

Outstanding!

I love the little details you have added. Great work!

[Zenator]

Outstanding!

I love the little details you have added. Great work!

Thank you very much Airbozo :) sorry for my late reply.

[Zenator]

Voting is up so please head on over and Vote for your favorite Case mod or Scratch build, links can be seen below.


http://i.imgur.com/J5jjFMF.jpg


Cooler Master Australia/New Zealand
Yesterday at 9:40am ·

Case Mod World Series "People's Choice" Voting Starts Now! Vote for a chance to win Cooler Master gear. Click the links to see the prizes. Ends June 24.

Click here to vote:
TOWER MOD: http://bit.ly/TowerMod2016
SCRATCH BUILD: http://bit.ly/ScratchBuild2016

‪#‎CaseModWorldSeries‬ ‪#‎ANZEdition‬
http://mod.coolermaster.com/en-us/infohub/103