Project:Dragzon Case

[sherren]

Hi,i just joined TBCS today would like to share my case project.
started in 2005
:blush: Juz planned to start a case project,as a hobby
Welcome To My Worklog Project!!
cut into half
http://img379.imageshack.us/img379/3238/img11743yg.jpg
Finally started this project:P
Took off everything from my old i cute case and transfered to a temporary [enlight]case
which im gonna use for the project also[i cute case]
http://img379.imageshack.us/img379/3096/img11754oy.jpg
Drilling Out The Rivets
http://img379.imageshack.us/img379/6824/img11771rk.jpg
All the sections are dismantled.
http://img379.imageshack.us/img379/329/img11780ot.jpg

Just bought CM Centurion 5 from Gadget Zone :drool:
http://img328.imageshack.us/img328/5905/img12585wl.jpg
http://img328.imageshack.us/img328/1585/img12598nc.jpg
http://img328.imageshack.us/img328/6575/img12607li.jpg
more updates after my final exam around november
:unsure:
The theme of this case will be in flames[still thinking] and custom fan grills etc more plans coming

[sherren]

went to hardware shop to get some wires,led,switch
http://img280.imageshack.us/img280/7936/thyehuat7uo.jpg
decided to start the psu mod :thumbs:
http://img280.imageshack.us/img280/7506/17fc1.jpg
opened the psu and cut off the stock fans
http://img280.imageshack.us/img280/5210/23nv.jpg
fixed blue led fan
http://img280.imageshack.us/img280/66/34tq.jpg
fixed cm uv fan
http://img280.imageshack.us/img280/5296/45io1.jpg
screwing cm uv fan on the Sunbeam Psu Uv reactive Case
http://img387.imageshack.us/img387/118/59dj.jpg
Double sided tape the sunbeam psu uv reactive case.
http://img387.imageshack.us/img387/517/75vq.jpg
Finally Is Done!
http://img387.imageshack.us/img387/4478/62vu.jpg
note: the crack on the sunbeam psu case is not by me,someone else............... :w

PSU Under UV light
http://img288.imageshack.us/img288/8039/85zv.jpg
[img]http://img288.imageshack.us/img288/7750/96ov.jpg[/img

[sherren]

Time to cut a window :P
http://img429.imageshack.us/img429/1074/05ar.jpg
Halfway cutting through
http://img429.imageshack.us/img429/4669/17md.jpg
Separating the cd rom bay and the fdd&hdd bay[not using]
http://img429.imageshack.us/img429/4213/20nn.jpg
Finally Done,and just riveting the bar for the cd rom bay
http://img441.imageshack.us/img441/252/30hl.jpg
still need to file and sand paper tommorow continue,
http://img430.imageshack.us/img430/824/43vt.jpg
:thumbs:

Another Update for today :drool:
cut it into half
http://img293.imageshack.us/img293/4490/19mv1.jpg
Taking off the part that i dont need
http://img293.imageshack.us/img293/2076/27re1.jpg
Riveting it
http://img293.imageshack.us/img293/6505/32oi.jpg
Finally Done,needs a respray
http://img293.imageshack.us/img293/4357/43ob1.jpg
http://img293.imageshack.us/img293/3733/58eo.jpg
http://img293.imageshack.us/img293/8697/66ue.jpg
http://img293.imageshack.us/img293/5708/78ex.jpg
http://img293.imageshack.us/img293/2962/89le.jpg

the case gonna plan for future use water cooling

[sherren]

Took a pic of the case got nth to do :o
http://img489.imageshack.us/img489/9904/13pw.jpg
http://img489.imageshack.us/img489/6025/22ht.jpg
http://img489.imageshack.us/img489/1415/35sq.jpg
http://img489.imageshack.us/img489/306/42an.jpg
due to my rotary tool[unknown brand] died.

anyway since i cant do any cutting work :cry: ,so i decide to do this strip off some stuffs ,since 1 week break do some mods :flex:
gonna spray int[black]and see what i can do
http://img461.imageshack.us/img461/8297/10cc1.jpg
http://img461.imageshack.us/img461/3171/28rk.jpg

Done A Little mod for today:D
fixed the rubber legs from cm5 so there is a space for the ccfl,took off the ccfl from the CM ccfl tube and transfer it to a Rubber Tube as shown in the pic
http://img217.imageshack.us/img217/3090/20nm1.jpg
Testing wether the ccfl is smash i guess,juz fit nicely :thumbs:
http://img357.imageshack.us/img357/5804/18uv.jpg
thats all for today, need to get 3/8 barbs,5 Black Spray Cans,silicon,epoxy glue :o $$$ :sweat:

[sherren]

Did a little mod Drilled holes for rivets,testing the rivets wether they fit:P
http://img498.imageshack.us/img498/5433/11co.jpg
http://img476.imageshack.us/img476/1500/28xa.jpg
:thumbs: :flex:

juz cut off the honeycombs so better air flow
http://img360.imageshack.us/img360/3583/12cd1.jpg
http://img360.imageshack.us/img360/4606/21sd.jpg
sry my cutting is not so perfect due using a drill :blush:

Finally got Rtx1 and Work Bench, and some stuffs :P
http://img300.imageshack.us/img300/5014/cimg11229zw.jpg

[YoungBlood]

Well done mate... Starting to look nice.... I like the case =D(Btw... Why didnt u just buy a smaller case :P)

[meticoeus]

why buy something new when you can recycle something you already have (as long as it still costs less).

[sherren]

http://img270.imageshack.us/img270/5530/85ty.jpg
cut a hole so psu wires can go through

Received Some stuffs
http://img530.imageshack.us/img530/5299/img0390medium8xb.jpg
Sleeving The Psu wires,Not Finished Sleeving yet
http://img471.imageshack.us/img471/9113/img0439medium4wh.jpg
http://img530.imageshack.us/img530/7780/img0432medium8nn.jpg
http://img530.imageshack.us/img530/8333/img0440medium0ka.jpg
http://img471.imageshack.us/img471/2946/img0445medium6xa.jpg

took off the top case part need to cut to make it as long as the centurion 5,noticed is longer abit the top case
http://img306.imageshack.us/img306/8906/img0528medium4jk.jpg
http://img467.imageshack.us/img467/7159/img0529medium8bo.jpg


Taking Off the top case
http://img300.imageshack.us/img300/9103/img0534medium6oc.jpg
http://img300.imageshack.us/img300/5527/img0535medium2ga.jpg
Cutting out the piece need to be cut
http://img300.imageshack.us/img300/8814/img0547medium2nx.jpg
http://img157.imageshack.us/img157/6874/img0536medium0zp.jpg
http://img157.imageshack.us/img157/5791/img0539medium0lx.jpg]

http://img157.imageshack.us/img157/4729/img0550medium7wl.jpg
http://img300.imageshack.us/img300/8932/img0551medium5pv.jpg
http://img484.imageshack.us/img484/8264/img0552medium8xv.jpg
Very satisfied with my work today :D
really need a respray, still gotta find a way to rivet the Top Casing.

[sherren]

http://img117.imageshack.us/img117/6633/img0555medium6tn.jpg
http://img117.imageshack.us/img117/7823/img0556medium3ge.jpg
http://img226.imageshack.us/img226/631/img0564medium6md.jpg
http://img117.imageshack.us/img117/8534/img0565medium9fg.jpg

fixed cm 120mm fan behind:P
http://img106.imageshack.us/img106/3226/img0569medium8zg.jpg
http://img106.imageshack.us/img106/4581/img0572medium3oz.jpg
Planning to make the front panel
http://img106.imageshack.us/img106/6351/img0573medium0kv.jpg
http://img106.imageshack.us/img106/1438/img0579medium6rt.jpg
Took out the c5 badge from the centurion 5 front panel:p
http://img152.imageshack.us/img152/4002/img0582medium3mb.jpg
Measuring the front panel:P
http://img152.imageshack.us/img152/4369/img0583medium7gv.jpg

Continued
Doin some sleeving
http://img106.imageshack.us/img106/9467/img0584medium5lx.jpg
http://img106.imageshack.us/img106/3744/img0585medium7oo.jpg
http://img152.imageshack.us/img152/1585/img0586medium7jx.jpg
Having Hard Time to cut 3mm arcylic :blink: ,halfway done
http://img149.imageshack.us/img149/9239/img0588medium6um.jpg
http://img106.imageshack.us/img106/1117/img0589medium0do.jpg

[sherren]

Cutted those bezels out
http://img69.imageshack.us/img69/486/img0592medium7lj.jpg
http://img331.imageshack.us/img331/6467/img0593medium0ds.jpg
Done cutting the front panel bezel's file + wet sanding edges
http://img69.imageshack.us/img69/1592/img0595medium5ye.jpg
Use epoxy glue to glue those sides
http://img331.imageshack.us/img331/7716/img0598medium4km.jpg
http://img69.imageshack.us/img69/7836/img0599medium7fe.jpg
http://img69.imageshack.us/img69/4858/img0600medium4ld.jpg
top panel glued, i know u can see fingerprints tomorow i will cleaned it off
http://img331.imageshack.us/img331/2513/img0601medium8km.jpg
Tested Fit
http://img69.imageshack.us/img69/528/img0602medium7do.jpg
http://img345.imageshack.us/img345/7613/img0603medium2sy.jpg
http://img331.imageshack.us/img331/9281/img0604medium7we.jpg

Update,fixin the electronic key hole
http://img138.imageshack.us/img138/860/img0605medium5hd.jpg
http://img138.imageshack.us/img138/5918/img0607medium3wu.jpg
http://img138.imageshack.us/img138/419/img0608medium5lc.jpg
http://img91.imageshack.us/img91/3231/img0609medium0hg.jpg
sprayed the inner part of the front panel
http://img138.imageshack.us/img138/3295/img0610medium3ev.jpg
heres the finish product of the Front panel:P :drool:
http://img91.imageshack.us/img91/3180/img0614medium5pt.jpg
can u see the reflections of the tiles? :thumbs: :drool:
http://img138.imageshack.us/img138/829/img0615medium4tl.jpg

[sherren]

anyway thanks,heres a close up of the front panel
http://img149.imageshack.us/img149/5161/img0618medium3nz.jpg
http://img87.imageshack.us/img87/5323/img0623medium1oy.jpg
sry for poor quality pics

fixed the top part arcylic,anyway gonna have a top blowhole for it and some designs later on,
http://img153.imageshack.us/img153/929/img0624medium6tn.jpg
http://img153.imageshack.us/img153/9572/img0625medium9kj.jpg

close up wit better lighting
http://img148.imageshack.us/img148/172/img0626medium8yj.jpg
as u can see i sprayed the inner part black colour
http://img153.imageshack.us/img153/5886/img0627medium0yh.jpg
more updates tomorow

Nothing just teaser's pics
just received
Vantec spec uv Led blue-green
2 fan grills
2mm 1ft x1ft arcylic
sidepanel.
http://img153.imageshack.us/img153/887/img0632medium2kr.jpg
:drool:
http://img153.imageshack.us/img153/4641/img0634medium9ke.jpg
http://img105.imageshack.us/img105/1672/img0636medium0gz.jpg
http://img371.imageshack.us/img371/4489/img0633medium9nh.jpg

[sherren]

http://img518.imageshack.us/img518/4126/img0643medium6ur.jpg
http://img518.imageshack.us/img518/6567/img0644medium3cc.jpg
http://img518.imageshack.us/img518/723/img0645medium6th.jpg
http://img518.imageshack.us/img518/6834/img0646medium4ss.jpg
http://img65.imageshack.us/img65/5825/img0647medium4yc.jpg
http://img65.imageshack.us/img65/5782/img0653medium0zo.jpg
http://img518.imageshack.us/img518/4961/img0654medium1nw.jpg
back under night,sry for blur pics
http://img518.imageshack.us/img518/5100/img0656medium6hh.jpg
http://img65.imageshack.us/img65/4144/img0662medium8hz.jpg
Still not satisfied with my top back panel.gonna redo again

Update For Today, note Tons Of pics today!

Bought some stuffs today,paint,the saw is for my project for KH [school project]
http://img501.imageshack.us/img501/1774/img0668medium4aa.jpg


ok have a look at this pic,see the red circle i drawed,theres a gap,so im not satisfied.and i threw away the back panel arcylic!
http://img127.imageshack.us/img127/8379/before8bi.jpg

heres what i did today redo the back panel
http://img501.imageshack.us/img501/3176/img0666medium4rt.jpg
http://img501.imageshack.us/img501/1829/img0667medium8fo.jpg
http://img127.imageshack.us/img127/89/img0671medium6mm.jpg
[img]http://img501.imageshack.us/img501/9510/img0672medium6sc.jpg[/img

[sherren]

Continued

redid
http://img501.imageshack.us/img501/9403/img0675medium5ka.jpg
http://img127.imageshack.us/img127/9122/img0678medium3tn.jpg
http://img501.imageshack.us/img501/4875/img0680medium7zg.jpg
http://img501.imageshack.us/img501/3205/img0681medium9yu.jpg

for the base of the casing interior
http://img127.imageshack.us/img127/3902/img0682medium9qt.jpg
http://img501.imageshack.us/img501/1656/img0683medium5ii.jpg
http://img130.imageshack.us/img130/166/img0685medium8pm.jpg
http://img527.imageshack.us/img527/4369/img0689medium8to.jpg
http://img501.imageshack.us/img501/5070/img0690medium9tv.jpg

sry for late updates,i was resting, and playing Live For Speed :drool: Drifting...
heres what i did today while waiting for some new stuffs to arrive,nothing much
earlier on the epoxy wasn't even with the case, so what i did i sanded it down
http://img68.imageshack.us/img68/1752/img0693medium5vj.jpg
This Time I Didnt Dirty The Grass :P
http://img68.imageshack.us/img68/9064/img0694medium2xz.jpg
not soo perfect :blush:
[img]http://img68.imageshack.us/img68/2444/img0695medium8mj.jpg[/img

[sherren]

here what i got ,which i ordered from my friend

20 Char x 4 Line (blue screen)
http://img349.imageshack.us/img349/6735/img0716medium9ve.jpg

Heres an update on the lcd module :drool: :hyper: :idea: :idea:
I took an old printer port wire ,open up the rubber tube which wires in it ;)
http://img96.imageshack.us/img96/456/img0797medium1qv.jpg
http://img161.imageshack.us/img161/6506/img0798medium9ts.jpg
Tube taken off
http://img161.imageshack.us/img161/3527/img0799medium3lb.jpg
time to cut off those unnecessary wires that we dont need.
http://img96.imageshack.us/img96/619/img0801medium3uj.jpg
http://img224.imageshack.us/img224/5267/img0802medium7ao.jpg
http://img96.imageshack.us/img96/2628/img0800medium3fs.jpg
Wiring done,too lazy to sleeve
http://img238.imageshack.us/img238/4314/img0803medium5og.jpg
Testing this 2 lines shows that the lcd is still good in condition :peace:
http://img114.imageshack.us/img114/1860/img0807medium8tx.jpg
winamp Display
http://img238.imageshack.us/img238/5341/img0809medium8fg.jpg
bleh
http://img224.imageshack.us/img224/1356/img0810medium8in.jpg
I know some pics are blur especially the lcd pics,becoz hand shake lol.
anyway i try to take a better pic of the lcd once i fix it to the bezel :peace:

Current[2006]
http://img170.imageshack.us/img170/3998/casedr9.jpg
been sleeping for a long time,collecting dust.i be continuein my mod after 2 weeks[final exam comin]

and also i have to refile to make it nice and neat...
sorry for my work is not that neat...im a newbie modder. which i started when i was 14 years old[2005].. now i gain some skills i might do better after my 2 weeks exam.. more updates to come

[dgrmkrp]

nice case project :) as long as you keep details at bay, it's gonna be sick! :)
also, color-wise.. why do you have blue, orange and green fans? and red sleeving? u planned it this way? ;) or you planned it this way?
good luck!

[YoungBlood]

Thats gonna be one noisy pooter xD.. O wait... i have like... 8 fans in my computer... 6 8cm and 2 12cm o.O FOrget i said that xD

[Acey]

Ahhh the lil kid is finally in TBCS... *claps claps*

[YoungBlood]

lmao Whos the youngest in TBCS? Im 15 ... 16 in january(the 29th if any1 wants to send me a Zalman Watercooling kit ^^)

[Acey]

Welp he's the same age as you. Young but good at wielding tools!

[sherren]

cool ur 15 too?,lol so young blood so u hav any mods?

[Acey]

Sherren, make sure you dont make us wait another 10 months.. lmao

[YoungBlood]

Yer.... Been planning on building a computer for about a year now... only just raised the confidence to break into a computer and smash it to bits ^^

You guys got msn? We can build together :)

[Acey]

We're of many different parts of the world, dude. Lol. He's 3 hours' trip from me, and you probably are 12 hours' trip away from me

[YoungBlood]

Im from the UK =) hehe

[sherren]

dont worry acey it will be finished end of dis year or earlier.and start a new project.yea i have msn...
im not good in welding... only good in using rotary tools:D ,etc

[YoungBlood]

kwl add me g.anderson2k6@gmail.com ^^

[tybrenis]

I'm only 14. Never held me back, I've got my own site and plenty of mods under my belt.

Great job with this mod, btw, it's coming along great!

[Acey]

Ty, u gotta be kidding me. You're 14?

[aericdavens]

Very nice looking mode you got going on here, I like :D

[nzcubey]

acey, i think youll find hes telling the truth, :D

[sherren]

Got some new screws today, cost me rm 25

http://img182.imageshack.us/img182/7484/cimg1069kn8.jpg

http://img178.imageshack.us/img178/9613/cimg1070ev6.jpg

http://img140.imageshack.us/img140/757/cimg1074bk9.jpg]

updates tomorow

[sherren]

Well today ,not that much though, Just file to make it even straightly, u can try to look at the older updates to compare.

http://img143.imageshack.us/img143/2167/cimg1106nt3.jpg

http://img100.imageshack.us/img100/4969/cimg1107qf9.jpg

Halfway Done
http://img100.imageshack.us/img100/6711/cimg1083pc6.jpg

Almost:p
http://img140.imageshack.us/img140/8129/cimg1105sh7.jpg

Finally Done :clap:
http://img143.imageshack.us/img143/9954/cimg1100be9.jpg

[YoungBlood]

Nice flip flops xD na nice work... makes me jelous that a fellow 15 year old can do that ;)

[nzcubey]

lol cool screws, love that blue, a case fully in that blue with silver or black would be prettttyyy

[sherren]

Any Ideas what can i do wtih this?
http://img152.imageshack.us/img152/6416/cimg1119pe9.jpg

I was Thinking removing this[see da red coloured lines]then place an arcylic piece on top , what do u think?
http://img135.imageshack.us/img135/8672/cimg1121hv3.jpg

and remove that legs
http://img183.imageshack.us/img183/7786/cimg1123oa7.jpg

[sherren]

Heres The Update :) :P
I was Taking Off The Top part of the case,It was Kinda Super hard to drill out those big rivets,and it dented my case abit :shock: ,sigh i will use some paty to cover up 6 holes,and im not going to use Rivets any more,give me a hard time,i will use Screws ,which is easier for next time and future. :)
http://img157.imageshack.us/img157/6501/cimg1138im0.jpg

see the dents
http://img208.imageshack.us/img208/851/cimg1139wn0.jpg

Next, i got this from an I-Cute Case
http://img147.imageshack.us/img147/7539/cimg1132nj9.jpg

Cutting it Shorter
http://img157.imageshack.us/img157/6787/cimg1133op5.jpg

Done Cutting
http://img157.imageshack.us/img157/9744/cimg1134op2.jpg

Test Fit on CM 80mm UV fan[Blue]
http://img100.imageshack.us/img100/1645/cimg1135qt7.jpg
http://img100.imageshack.us/img100/4956/cimg1136in2.jpg
http://img157.imageshack.us/img157/700/cimg1137mt9.jpg

[sherren]

Its Time to Cut a blowhole on the Top Panel of The C5 Case
http://img100.imageshack.us/img100/7219/cimg1142rj1.jpg

Done Cutting
http://img100.imageshack.us/img100/521/cimg1145ln7.jpg
http://img157.imageshack.us/img157/1913/cimg1146lc5.jpg
http://img157.imageshack.us/img157/7829/cimg1147ac4.jpg
http://img100.imageshack.us/img100/8344/cimg1148wg2.jpg

By the way the hole is not properly filed,tomorow i will file it properly

[sherren]

Just some pic's
http://img144.imageshack.us/img144/1555/cimg1150cx7.jpg
http://img155.imageshack.us/img155/329/cimg1151pj8.jpg
http://img100.imageshack.us/img100/8459/cimg1152lz7.jpg
More updates tomorow

[TheMovement4]

Wow very nice man! I was wondering, and this to anyone, but I like your LCD where did you get it? Sorry if it was said earlyer. I have a project coming up soon and may look into that. Does it display like say computer temps?

[sherren]

yea ,u can ,im using Crystal Control program for the lcd, well the lcd i get it from a friend of mine who did a bulk which he orders from China

[TheMovement4]

Ah, ok ill keep that in mine. Do you know of other places that sell those?

EDIT: nvm, I looked on your pictures and got the model number, then went onto ebay. I have one picked out, but now I got to transfer money to my PayPal. Thanks again.

[sherren]

17 Oct Update :clap: :clap: :peace:
Filed The blowhole which i left out yesterday which i didnt file it properly
http://img83.imageshack.us/img83/4476/cimg1173ic3.jpg
:P
http://img83.imageshack.us/img83/3429/cimg1174ua7.jpg

Well its time to cut another hole on the 2nd case
http://img183.imageshack.us/img183/8101/cimg1181lb4.jpg

http://img139.imageshack.us/img139/6646/cimg1183gj1.jpg

Stay tune for next update[ASAP]

[sherren]

Here Comes the Next Update

Cutting through the lines
http://img149.imageshack.us/img149/3851/cimg1185yu4.jpg

RTX 1 Has to take a rest,fan blowing and enjoying the cushion[my gloves]LOL
http://img150.imageshack.us/img150/6991/cimg1187sy1.jpg

Very Dusty....
http://img170.imageshack.us/img170/5428/cimg1188qu3.jpg

Done The 2nd Case Blowhole
http://img152.imageshack.us/img152/6900/cimg1189oy2.jpg

Close up, I Noticed I improved alot way then last time
http://img170.imageshack.us/img170/6296/cimg1191yy8.jpg

the two case blowhole
http://img170.imageshack.us/img170/78/cimg1193ao8.jpg

Little close up,air duct attached
http://img156.imageshack.us/img156/4731/cimg1194hm2.jpg

LOL
http://img170.imageshack.us/img170/6065/cimg1198wa5.jpg

Next update coming

[sherren]

:drool: Last update For Today :clap:

A Test Fit wit both case Attached
http://img247.imageshack.us/img247/1951/cimg1201xa3.jpg

Next Mod i was thinking of what can i do wtih this,strip off those which i wanted to remove.I need some ideas for this

http://img247.imageshack.us/img247/5/cimg1202fn0.jpg

being removed
http://img170.imageshack.us/img170/5222/cimg1203bm1.jpg

http://img95.imageshack.us/img95/5757/cimg1208nf0.jpg

attached the Alu sides
http://img144.imageshack.us/img144/5442/cimg1211ks2.jpg

back view
http://img156.imageshack.us/img156/8335/cimg1212ja1.jpg

top view
http://img144.imageshack.us/img144/973/cimg1214iv2.jpg

http://img149.imageshack.us/img149/2506/cimg1215vo6.jpg

[sherren]

Upcoming plans for Project Dragzon Case once i get my
soldering tools and etc:

DIY>
-Molex Hub
-Fan controller
-Lighting
-Bezel[arcylic] to fit the 20x4 LCD module
-Switchs bay
-etc might be more

Lastly Cable Management :drool:

[Chel]

I have the same CM case..very nice. For the top you could just put like 3 120cm fans up behind the mesh air filter thingers.. Just an idea..

[sherren]

good idea, i be planning to add 2x 120mm :D

[sherren]

LCD Update :clap:

Creating an arcylic bezel for it,measuring

http://img126.imageshack.us/img126/8599/cimg1307le7.jpg

measured done
http://img46.imageshack.us/img46/9195/cimg1309dj5.jpg

Time to cut B]

http://img125.imageshack.us/img125/4872/cimg1312ga9.jpg

[sherren]

Continued

Cutted out the piece
http://img184.imageshack.us/img184/5702/cimg1314yb4.jpg

and we are done here
http://img153.imageshack.us/img153/1856/cimg1315rj6.jpg

screwed for testing

http://img95.imageshack.us/img95/8108/cimg1316ze4.jpg

http://img73.imageshack.us/img73/2615/cimg1318py3.jpg

[GT40_GearHead]

how much did you paid for it

[sherren]

Ringgit Malaysia 48 , u have to use a currency converter to change it to ur curreny

[GT40_GearHead]

thanks dude

[sherren]

Today's Update

ok here is the back panel which is damaged..
http://img307.imageshack.us/img307/1001/cimg1421ks3.jpg

this steel i found in the stor room,which I can replace the back panel holder
http://img341.imageshack.us/img341/8418/cimg1423yr1.jpg

http://img307.imageshack.us/img307/6065/cimg1424fo6.jpg

http://img341.imageshack.us/img341/1883/cimg1426po7.jpg

drilling holes on the steel
http://img347.imageshack.us/img347/4398/cimg1427tk7.jpg

Done and sanded ,
http://img307.imageshack.us/img307/2548/cimg1428gk5.jpg


More updates will be coming

[Omega]

I saw "PrettyRicky" on that matrix orbital a few pages back -- you wouldn't happen to be the same PrettyRicky on the Burning Blade Alliance side in WoW? Something like a 50 paladin, dwarf?


Anywho, the mod looks great, keep it up! =D

[sherren]

Today's Update :thumbs: ,Well Back into Modding Mood

well heres the same aloy piece, trimmed it

http://img89.imageshack.us/img89/663/cimg1430sn6.jpg

http://img242.imageshack.us/img242/5836/cimg1432yp5.jpg

As u can see in the picture i added something on top which is screwed

http://img89.imageshack.us/img89/6399/cimg1434xy5.jpg

http://img243.imageshack.us/img243/3807/cimg1437bu2.jpg

http://img243.imageshack.us/img243/2439/cimg1439st4.jpg

http://img170.imageshack.us/img170/1234/cimg1440qb9.jpg

Ok heres a pic wit the rubber legs

http://img291.imageshack.us/img291/408/cimg1441kp7.jpg

I would to know some opinions should i use the rubber legs or just leave it close like this pic
http://img89.imageshack.us/img89/6399/cimg1434xy5.jpg

More Updates will be coming :peace:

[sherren]

Not an update today,have to wait for stuffs to arrive, coming soon.
by the way here are some close shots of the top case.Ignore the back plate [alu] gonna replace it wil L shaped Alu poles.

http://img133.imageshack.us/img133/2789/cimg1442co7.jpg

http://img100.imageshack.us/img100/1992/cimg1444eh5.jpg

[sherren]

Today's Update, sorry for delay... Feel so Lazy to mod, because played on9 games till late.. :o

Ok heres a pic of the front , i was thinking to replace the front 80mm to 120mm since that the front 80mm fan was not providing enough airflow, as well as adding the noise factor :blink:

http://img100.imageshack.us/img100/5486/cimg1446yj1.jpg

strip off the hdd/floppy bay

http://img243.imageshack.us/img243/373/cimg1447ee6.jpg

Time to Measure 120mm hole to be cut

http://img100.imageshack.us/img100/9472/cimg1451zb5.jpg

Markings has been made out,time to chop off
http://img100.imageshack.us/img100/3629/cimg1453li5.jpg

Cut and filed
http://img179.imageshack.us/img179/4341/cimg1457ze7.jpg

Test Fit 120mm fan
http://img100.imageshack.us/img100/6155/cimg1458ve9.jpg

http://img439.imageshack.us/img439/8338/cimg1460cd1.jpg

Next Have to chop off some parts on the hdd/floppy bay,will update after my supper B]

[sherren]

Just Had my Supper.

ok chopped out 1 part,sorry i didnt take a pic when the 2 parts are already chopped

http://img506.imageshack.us/img506/5185/cimg1462nl2.jpg

front view

http://img78.imageshack.us/img78/2443/cimg1463gi2.jpg

side view

http://img78.imageshack.us/img78/6586/cimg1465np0.jpg

inside view

http://img171.imageshack.us/img171/5006/cimg1466im1.jpg

Tomorow i should have my stuffs arrived :clap: :hyper:

[TOXIC]

nice job man

[sherren]

@Toxic thanks

nth much for today

just trimed so be able to fit in the 120mm fan without removing the hdd cage

http://img481.imageshack.us/img481/5333/cimg1478hz7.jpg

Finally Got My Stuffs From a forumer:hyper: :thumbs:

http://img481.imageshack.us/img481/8159/cimg1484ae3.jpg

http://img481.imageshack.us/img481/6886/cimg1487os7.jpg
Alot Of Stuffs :flex:

[GT40_GearHead]

wooow, that a lot of stuff, the soldering iron looks nice, what did you payd for it ?

[sherren]

the soldering tools is Hakko braND[Green] Ringgit Malaysia 24 :up:
total spend on that stuffs on the pic is about ringgit malaysia 235

[sherren]

Well well what do we have here :D :P the case almost to be completion a few weeks times :hyper: very excited today got the Mood To Mod .

Ok heres the arcylic need to be cut for the side panels
http://img82.imageshack.us/img82/8956/cimg1496ui5.jpg

http://img98.imageshack.us/img98/1967/cimg1497bi8.jpg
dont look at that phone is super old and suxs

:P :P tested fits very NIcely
http://img82.imageshack.us/img82/8283/cimg1500hu3.jpg

The Backside
http://img82.imageshack.us/img82/3324/cimg1501fx0.jpg

heres a piece of arcylic for the top case side panel
http://img82.imageshack.us/img82/4540/cimg1502fe1.jpg

Sorry no more :D but there will be more coming after My Dinner, and Supper B]

Note: All The Arcylics i cut is with a plastic cutter :thumbs:

[sherren]

heres comes next juz had my dinner

the top case side panel is done
http://img384.imageshack.us/img384/2467/cimg1503qd0.jpg

http://img150.imageshack.us/img150/32/cimg1504ey5.jpg

http://img144.imageshack.us/img144/6334/cimg1505un7.jpg

http://img144.imageshack.us/img144/1504/cimg1506tr6.jpg

next have to do the top panel :idea:

still thinking for a design for the sidepanel

updates after my supper

[sherren]

juz had supper

some shots arcylic for the top panel
http://img394.imageshack.us/img394/9769/cimg1507yo8.jpg

http://img468.imageshack.us/img468/9865/cimg1508zj6.jpg

Drilled Holes
http://img468.imageshack.us/img468/918/cimg1514yv5.jpg

http://img468.imageshack.us/img468/3972/cimg1515rw7.jpg

http://img468.imageshack.us/img468/4255/cimg1516xt0.jpg

test fit

http://img394.imageshack.us/img394/8458/cimg1518uo1.jpg

More updates tomorow

[GT40_GearHead]

how are you planing to fix the panels to the case

[sherren]

u see it soon :banana:

[sirkillalot617]

loving the case so far coolermaster all the way

[GT40_GearHead]

you are making me curious
:banana:

[sherren]

update :P

heres the plan to fit the usb thingie on top here

http://img120.imageshack.us/img120/4817/cimg1526zk1.jpg

have to cut off abit to be able the wires to go through
http://img179.imageshack.us/img179/3531/cimg1529hd3.jpg

drilled holes
http://img120.imageshack.us/img120/2518/cimg1530fa1.jpg

just a test fit
http://img179.imageshack.us/img179/6149/cimg1531on2.jpg

http://img120.imageshack.us/img120/4084/cimg1532xr1.jpg

next to cut a 120mm on the arcylic

[sherren]

heres the 120mm gonna be cut

http://img445.imageshack.us/img445/6792/cimg1548jc9.jpg


http://img445.imageshack.us/img445/439/cimg1549hr2.jpg

test fit
http://img445.imageshack.us/img445/1594/cimg1551hm5.jpg

http://img421.imageshack.us/img421/8048/cimg1552wm5.jpg

[sherren]

Update For Today..

heres the plan gonna be like Ah lian Look ,done markings

http://img100.imageshack.us/img100/2681/cimg1578oc5.jpg

Ready To Be Cut, Modding in My room[gonna be dusty] so more got air cond :rolleyes: becoz outside very hot
http://img145.imageshack.us/img145/4462/cimg1579ag4.jpg

Finish cutting

http://img145.imageshack.us/img145/3352/cimg1580cb1.jpg

test fit into the casing

http://img172.imageshack.us/img172/1103/cimg1581al1.jpg

now planning for the sidepanel what deisgn? square? or etc no idea.....,hmm was thinkin square...

http://img295.imageshack.us/img295/1927/cimg1584hr6.jpg

[sherren]

Little update, spending alot of time after dinner on measuring properly , i hate doing mistakes :furious:

http://img300.imageshack.us/img300/720/cimg1586pl7.jpg

I used this to make marking curve's on the arcylic

http://img174.imageshack.us/img174/2521/cimg1587we4.jpg

Ready to be Cut
http://img467.imageshack.us/img467/9927/cimg1588ls3.jpg

Brb cutting now its so late :shock: :P

[sherren]

Heres da update :hyper:

Workplace in my room

http://img82.imageshack.us/img82/3188/cimg1591gj3.jpg

the sidepanel has been cut

http://img82.imageshack.us/img82/6589/cimg1592ml4.jpg

http://img82.imageshack.us/img82/9948/cimg1593ty7.jpg

:shock: :stars: look at how dusty lol after cutting so much
http://img87.imageshack.us/img87/8291/cimg1595vf0.jpg

the top side panel has been cut 2 pcs done pic shown 1 pc.

http://img82.imageshack.us/img82/4531/cimg1596oy9.jpg

Note :The arcylic which u see in the pics are not been filed and sanded yet .
brb gotta go have a cup of coffee ,early breakfast 6am.

[sherren]

Done for the big sidepanel :clap: Filed .. soon have to sand with 1000 grit on the sides

Today Hectic Day Mod since earlier 9pm Sat to 6am Sun. then 8am to 10am
Dam Tired like **** :o :o

http://img95.imageshack.us/img95/1298/cimg1600cu4.jpg

http://img95.imageshack.us/img95/8042/cimg1602sq1.jpg

:w :w

goin out now get some sand paper ,etc

[tybrenis]

Looking great! This is coming along very well.

[sherren]

heres the top side panel

http://img299.imageshack.us/img299/3425/cimg1612ue0.jpg

cant take it anymore,Need to sleep now,more updates tomorow :thumbs: :thumbs:

[jdbnsn]

I love it, you make your round corners just like I do...grab the nearest round thing-a-ma-jig and trace! Awesome, panels are looking good too.

[GT40_GearHead]

dude i love your garden, it looks great :D

ouuu the panels... they too (j/k nice job on the panels, you must have a stady hand :D)

[sherren]

Heh Thanks GT 40 ,yea i filed slowly till achieve that8)

Little Update

http://img169.imageshack.us/img169/7615/cimg1613zv2.jpg

http://img169.imageshack.us/img169/9463/cimg1618ln5.jpg

[sherren]

Update 13 Nov! :clap:

Decided to strip off everythin
http://img197.imageshack.us/img197/5364/cimg1622di7.jpg

will strip off the paint tomorow,see i have time

:blink: i screwed up the right pane[arcylic]l ,so i guess i have to use back the metal side panel i dont know ,will it match?

http://img145.imageshack.us/img145/635/cimg1626he3.jpg

http://img145.imageshack.us/img145/7334/cimg1625gk5.jpg

I guess , i should go get another piece of arcylic



Some Teaser pics

close up on the top

http://img145.imageshack.us/img145/6606/cimg1632mf9.jpg

http://img197.imageshack.us/img197/875/cimg1633zc0.jpg

http://img197.imageshack.us/img197/788/cimg1634df4.jpg

http://img145.imageshack.us/img145/3593/cimg1636gj6.jpg

[sherren]

heres some updates for today

ready to be sanded
http://img142.imageshack.us/img142/6127/cimg1638wg5.jpg

added 4 more screw holes
http://img296.imageshack.us/img296/9413/cimg1639tr6.jpg

This is not me,my friend came over,he helped me sand while i was doing other stufs :P
http://img296.imageshack.us/img296/5692/cimg1640zu8.jpg

the arcylic side panel one side sprayed black
http://img296.imageshack.us/img296/2240/cimg1644du2.jpg

Lucky No FLies!!! or moisqutoes :clap: :flex: they must be scared of Dragzon
http://img170.imageshack.us/img170/6357/cimg1645vy6.jpg

B] B] :w
http://img296.imageshack.us/img296/8510/cimg1650ow6.jpg

http://img170.imageshack.us/img170/1512/cimg1652ht5.jpg

http://img296.imageshack.us/img296/3586/cimg1653iy3.jpg

There are some stuffs i still need to resand and redo :o

[sherren]

Done wit the top side panels,only thing left is spray black at the back

http://img141.imageshack.us/img141/8924/cimg1659sr3.jpg

More updates tomorow

[sherren]

15 Nov update,sorry now only update,yesterday too tired i received L shaped Alu from someone Thank you so much for providing this F.O.C

http://img136.imageshack.us/img136/2214/cimg1662hy4.jpg

Its time to saw it up

http://img136.imageshack.us/img136/1462/cimg1664gw4.jpg

cut and filed

http://img136.imageshack.us/img136/1474/cimg1665ct4.jpg

wala now its fits,steady and rigid

http://img136.imageshack.us/img136/4279/cimg1666ez9.jpg

[sherren]

here some pics for the right panel arcylic yesterday receive from a forumer :thumbs: Thanks!!

http://img377.imageshack.us/img377/696/cimg1702zh4.jpg

http://img120.imageshack.us/img120/605/cimg1701rj3.jpg

[sherren]

23rd Nov Update yesterday's

this few days havent got the mood to mod,finally today i had the mood :P

I decided to add this arcylic strip between the both case

http://img300.imageshack.us/img300/6938/cimg1816sc2.jpg

http://img300.imageshack.us/img300/6831/cimg1813ca5.jpg

http://img368.imageshack.us/img368/3603/cimg1815py1.jpg

and Today's

The top case side panel,this is my 3rd piece of arcylic :shock: ,sigh wasted :shakehead: becaused i made few mistakes earlier

http://img300.imageshack.us/img300/2782/cimg1850hr7.jpg

Watch out for the next update soon , let me go get my case :lol:

[sherren]

Here are some pics :P

You guys noticed the top case left panel, i havent cut a window for it yet.

http://img300.imageshack.us/img300/2407/cimg1851vd9.jpg

http://img300.imageshack.us/img300/446/cimg1852xc2.jpg

http://img300.imageshack.us/img300/2307/cimg1854lh7.jpg

http://img392.imageshack.us/img392/7449/cimg1853ln4.jpg

and lastly

http://img452.imageshack.us/img452/8958/cimg1855jy1.jpg

[sherren]

did a test on a piece of LED

http://img172.imageshack.us/img172/4397/cimg1859et9.jpg

with a piece of led inside

http://img172.imageshack.us/img172/3500/cimg1865zj6.jpg

http://img172.imageshack.us/img172/3450/cimg1867wo8.jpg

i guess i need to add some led's

[sherren]

Update for Today 16 Dec, sorry for the long long delays :shock: ,alot of people asking me when im gonna finish it :rolleyes: ,well i wanna finish as soon as posible before christmas, it should be finished by sun, or mon or tues.

ok heres the top partition, i fixed a ledge so it can be opened like a bonnet :P ,just have to take off two screws from the back

http://img398.imageshack.us/img398/1163/cimg2043fy0.jpg

sprayed

http://img526.imageshack.us/img526/2271/cimg2045ez6.jpg

ok here are the casing parts,gonna do operation on Dragzon :hmm:

http://img526.imageshack.us/img526/6043/cimg2049bg2.jpg

slowy and slowly Dragzon will be formed back again

http://img526.imageshack.us/img526/4949/cimg2050lr6.jpg

http://img398.imageshack.us/img398/8436/cimg2056ue1.jpg

http://img216.imageshack.us/img216/5472/cimg2058eu3.jpg

to be continued

[sherren]

Continued

Dragzon operation is almost done :) ,time to join both case together

http://img216.imageshack.us/img216/3495/cimg2060st8.jpg

.....Operation Successfull :P

he was outside getting some fresh air after a long hours of operation

http://img216.imageshack.us/img216/2614/cimg2065wr6.jpg

http://img139.imageshack.us/img139/9132/cimg2067tq5.jpg

ok now we are going to the front panel,still planning

http://img156.imageshack.us/img156/2282/cimg2073oa2.jpg

the top panel, ignore the one the left:P did some mistake :blink:

http://img381.imageshack.us/img381/7982/cimg2082on3.jpg

and finally my dad bought me a CM 430w :lol: ,wanted an ACBEL :P i guess i just use it 1st,then later :hmm: :P

http://img483.imageshack.us/img483/8839/cimg2084rb4.jpg

more updates coming soon

[naspc]

nice add on to the top.

[simon275]

Noice.

I love what you did with the LED's it looks really cool.

[sherren]

Noice.

I love what you did with the LED's it looks really cool.

thanks


Ok update, :D
heres the back plate

http://img85.imageshack.us/img85/5905/cimg2086ug4.jpg

http://img151.imageshack.us/img151/579/cimg2089vu7.jpg

cut out 120mm blowhole

http://img85.imageshack.us/img85/2840/cimg2087nl5.jpg

this is the top partition top window arcylic which i redid

http://img85.imageshack.us/img85/5424/cimg2092ax0.jpg

http://img85.imageshack.us/img85/7366/cimg2094mb3.jpg


so far front panel left to be done,etc

http://img85.imageshack.us/img85/598/cimg2095qq6.jpg

[sherren]

;) Update for today, close to final

making some outline for the front panels

http://img279.imageshack.us/img279/3589/cimg2101bc7.jpg

drill holes for the screws

http://img299.imageshack.us/img299/8141/cimg2102kg1.jpg

i know it looks funny abit because the screws is not evenly same as the below case,who cares bout it :P

ok since its late i cant cut the front panel arcylic,decide to fix those fans 1st

http://img299.imageshack.us/img299/6928/cimg2108os9.jpg

fitted those fans :lol:

http://img299.imageshack.us/img299/5197/cimg2109na7.jpg

little close up on the front 120mm fan
http://img526.imageshack.us/img526/9850/cimg2113pe0.jpg

thats all for today

[simon275]

Funky semitransparent fans. :up: Good to see you are getting everything measured up.

As the saying goes Measure twice cut once and not the other way round.

[sherren]

not much update sry, been busy

http://img147.imageshack.us/img147/9956/cimg2114vd2.jpg

http://img81.imageshack.us/img81/2541/cimg2116pt9.jpg

http://img247.imageshack.us/img247/9163/cimg2120om1.jpg

[DRece]

It makes me want to get back on my project, which I haven't done for a while. Great work, keep it up!!!:up: :up: :up:

[sherren]

thanks.. what is ur project? got any link?

little update on the front panel

http://img147.imageshack.us/img147/60/cimg2122yg2.jpg

test fit front panel,still need to file so more :)

http://img187.imageshack.us/img187/7748/cimg2128om2.jpg

http://img149.imageshack.us/img149/1091/cimg2130uq2.jpg

[ChadB]

That is looking sweet, can't wait to see it finished.

[sherren]

heres what i did today

sprayed the covers of the pci slots to orange,sorry its to bright due to the flash

http://img296.imageshack.us/img296/9889/cimg2140bb9.jpg

http://img187.imageshack.us/img187/2484/cimg2143gp5.jpg

heres the front panel,u see what will it be tomorow

http://img268.imageshack.us/img268/7333/cimg2147qq1.jpg

[zitwep10]

This looks off the hook, I really like the idea and I can't wait for the end product.

[Omega]

Man, your acrylic work is really cool. Makes me wish I had the money (and weather, **** man, it's been raining too much to do anything other than basic metal/dremel work in the garage) to be able to play around with acrylics and get good at them.

The case looks awesome, I love the contrast of the orange to the black, looks nice.

Reading all this makes me really want to go work on my mod... I think I might do some filing after I clean off my workbench and surrounding areas.. I have the remains of a computer case that I used for it's mounts all over my workbench and the floor, not to mention the books on my bench (none of which are the modding bible) and all the dust from the dremel disks and metal before =/


But yeah, looks great! Keep up the wonderful job.

[sherren]

That's Cool, bad news my front arcylic broke:dead:

[Omega]

That's Cool, bad news my front arcylic broke:dead:

Ouch. How did that happen?

[sherren]

@ Omega

well maybe i treat it to harshly and broke it since i was rushing like mad

:) today went to a hardware shop
and I got myself U shaped Alu 3 metre costs me RM 27

http://img182.imageshack.us/img182/7309/cimg4835ig5.jpg

was thinking and found out maybe i could use this for my front panel

http://img409.imageshack.us/img409/1296/cimg4837hw9.jpg

did a test ,added the sunbeam fan controller just to alignment the two U alu's

http://img440.imageshack.us/img440/8015/cimg4848fs4.jpg

http://img113.imageshack.us/img113/5948/cimg4849uc7.jpg

gotta find a way how im gonna mount the two U alu's

[Commando]

Wow, looks awesome. I like all the acrylic work.

[sherren]

thanks, wish i would have a jigsaw much more easier for straight cuts,
so far i left the front panel, gotta find a way to mount that two alu's , my idea was using L bracket. The front reminds me of the CM Stacker:rolleyes:

[sherren]

ok i just found out that ,those lian li slot covers can be bought, i might wanna get 9 pcs of Black , + the front panel side's are silver, so it be matching black and silver,
at the 1st place i was thinking to use arcylic as the bezel's , it was troublesome when i think about it,since the lian li slot covers ur able to screw.

:D :thumbs:

[yakyb]

very commited work i like it

you seem to be going forward very nicely always chacking your measurements which is great cant wait to see this thing finished with some internals

what are you planning on filling it with

by the way love your garden looks like a very relaxing place to mod, i have a nice garden also but its forever raining in the UK.

[sherren]

from a long awaited i was too busy and now i AM BACk kickin:banana:
so now the plans that im not using the top case on top as is gonna be down now , as planning stage for the upcoming lan party over my country:banana:

[sherren]

ok so this was a long update which i posted on the forums few months earlier, as i was very busy i only can be updating one site at a time . but now im free again:up:

Here they are,Check out The Results :) it may not be good as perfect, still need to sandpaper the sides:D took me half an hour to file all the sides nicely,Pictures are better quality now taken with Canon A710 IS :thumbs:

http://img144.imageshack.us/img144/8803/img0248vx6.jpg

http://img402.imageshack.us/img402/9240/img0252ui1.jpg

http://img243.imageshack.us/img243/4382/img0253dn8.jpg

more pics of the side panels

http://img402.imageshack.us/img402/9494/img0260nf9.jpg

http://img243.imageshack.us/img243/1686/img0263gh9.jpg

http://img402.imageshack.us/img402/7193/img0266oh4.jpg

[sherren]

Top Panel Ready to be Cut

http://img162.imageshack.us/img162/9011/img0318bv1.jpg

My Work Place

http://img162.imageshack.us/img162/9967/img0330ek6.jpg

Halfway Cutting
http://img217.imageshack.us/img217/1772/img0334oj9.jpg

__________________________________________________ __________________


Finished Cut Off

http://img162.imageshack.us/img162/2624/img0336kh0.jpg

Filed, sanded off the epoxy resin which i covered the old holes which i drilled last time.

http://img231.imageshack.us/img231/1953/img0341nm8.jpg

Here Are The Side Panels need to be sandpapered and needs a respray together as the top window top only.Which Im gonna do tomorow.

http://img158.imageshack.us/img158/5707/img0319yh2.jpg

as you can see the right 2 bezel's i put there
http://img337.imageshack.us/img337/5189/img0461va3.jpg

as the alu u can see 4 pointers i had to file abit so the screw can screw in thru properly

http://img337.imageshack.us/img337/5623/img0466lf0.jpg

screwed nicely

http://img134.imageshack.us/img134/8750/img0470wv9.jpg

i just bought Two lian li rom slot cover's

http://img134.imageshack.us/img134/4042/img0471mo0.jpg

heres the top part drillled and screwed

http://img337.imageshack.us/img337/5227/img0478jt9.jpg

to do list,

Cut arcylic for the side panel window, top panel, Front Panel
Custom Front Panel
Sanding side panels , respray.
and etc

[sherren]

Heres The Alu i want to use for the front panel, so it match with the top roof,and give it an ALU look :D

http://img339.imageshack.us/img339/3158/img0494fm3.jpg

Drilled and screwed on with nuts,sorry didnt take pics of the process of drilling,

http://img58.imageshack.us/img58/2449/img0524pp1.jpg

Heres the Front Panel Arcylic , measured and made markings

http://img391.imageshack.us/img391/9659/img0526rb4.jpg

I havent cut the Front panel arcylic yet , it was late already, plus i havent sanded the side panels yet , i do it by tomorow.

Heres some Pics with the roof,sidepanel, halfway done front panel :blush:
assembling the top roof

http://img339.imageshack.us/img339/2906/img0531ys3.jpg

http://img339.imageshack.us/img339/9220/img0533dm1.jpg

http://img339.imageshack.us/img339/59/img0536ci1.jpg

heres the arcylic top roof arcylic with 120mm blowhole :P

http://img341.imageshack.us/img341/5230/cimg5398kj9.jpg

:thumbs:

http://img169.imageshack.us/img169/4527/cimg5403oy7.jpg

heres the test fit

http://img341.imageshack.us/img341/5701/cimg5423ta9.jpg

still gotta do some filing :D

http://img169.imageshack.us/img169/1058/cimg5425ak3.jpg

Heres the Front panel sprayed, and glued

http://img88.imageshack.us/img88/5320/cimg5441lh0.jpg

More pics of the front panel :hehe: :thumbs: B]

http://img214.imageshack.us/img214/4555/cimg5445uu6.jpg

http://img214.imageshack.us/img214/7159/cimg5447tg9.jpg

http://img88.imageshack.us/img88/727/cimg5448qf9.jpg

Left Side panel, to be sanded, respray :thumbs: ,

by now i can start doing the electronics :peace:

Heres the switch fitted

http://img407.imageshack.us/img407/9121/cimg5452fj5.jpg

[sherren]

added the side panel window and two eye's[80mm fan]
+ repsrayed side panels

http://img103.imageshack.us/img103/9998/img3138ju3.jpg

left panel
http://img103.imageshack.us/img103/286/img3143md3.jpg

right panel
http://img103.imageshack.us/img103/2925/img3146ig8.jpg

whole case
http://img103.imageshack.us/img103/6422/img3152gv6.jpg

and i got a new stuffs for Dragzon
specs

Amd Athlon 64 X2 5200+
Abit AN52 S
Kingston 1GB x2 DDR2 667
Gigabyte 8500GT Turbo Force Ultra Edition

http://img407.imageshack.us/img407/4898/img4233kg7.jpg
Please Ignore the Asus Motherboard and the Geforce 7200gs that was borrowed from my dad :P to run for while.

Thermaltake Ruby Orb and Abit AN52S, got a nice bag indeed
http://img159.imageshack.us/img159/2267/img4313fm1.jpg

man i love this mobo orange colour board :clap:

http://img329.imageshack.us/img329/2406/img4300vb2.jpg

The mounting fittings for Ruby Orb

http://img514.imageshack.us/img514/1237/img4320ao7.jpg

Man, This thing is HUGE
:shock:

http://img329.imageshack.us/img329/4583/img4323ss3.jpg


the overall look

http://img514.imageshack.us/img514/5756/img4326ng6.jpg

http://img329.imageshack.us/img329/9131/img4329fh8.jpg



some night shots

http://img329.imageshack.us/img329/8549/img4336zb4.jpg

http://img178.imageshack.us/img178/4219/img4337ap2.jpg

[sherren]

and this is the graphic card

http://img135.imageshack.us/img135/2428/img4441lf1.jpg

The Card, Cd's , hand book, a connector hub:eh:
http://img207.imageshack.us/img207/1852/img4444oj1.jpg

Close Up:thumb: :thumb: :drool: :drool: :drool:

http://img135.imageshack.us/img135/1692/img4451jc8.jpg

ok there will be an Upcoming Lan party will be held in Penang,Malaysia which where i live is around Nov/Dec 07, i be participating for the case modification,
planning my case for the upcoming lan party penang 2007 case modding compettion :ph34r: :ph34r:

[yazeed1906]

Nice!!!!!!