ut2k7

[fir3b4ll]

http://img294.imageshack.us/img294/2968/ut2k73drenderbo9.jpg (http://www.planetfireball.de.vu/)

check
http://www.planetfireball.de.vu/

my homepage of the new unreal tournament 2007 casemod, its not english but the pics should show you enough

you have to klick on the navigation button "aktueller mod"
comments are welcome

have fun

[simon275]

Noice.

[DaveW]

Not bad, not bad at all! I remember your last mod too, that was really good. Building up quite a portfolio! :)

-Dave

[fir3b4ll]

Not bad, not bad at all! I remember your last mod too, that was really good. Building up quite a portfolio! :)

-Dave

thx, i will make a log tomorrow and post it here ;)

[fir3b4ll]

i wanna start with some concept arts and a 3d render

http://img174.imageshack.us/img174/7554/200702020749422h50m47sfj9.jpg
http://img503.imageshack.us/img503/2470/19ng6.jpg
http://img268.imageshack.us/img268/2275/20vs3.jpg
http://img220.imageshack.us/img220/1773/andereseite3copyes5.jpg
http://img248.imageshack.us/img248/310/34pq8.jpg


the next pics are from the shock rifle i build, here are the first steps, modeling the rifle with wood, polyurethane foam and spackle

http://img427.imageshack.us/img427/149/36fl3.jpg
http://img367.imageshack.us/img367/773/21fo2.jpg
http://img254.imageshack.us/img254/7430/22ak7.jpg

and the next step ;-)
http://img274.imageshack.us/img274/2584/47xy0.jpg
http://img327.imageshack.us/img327/984/42qn4.jpg
http://img100.imageshack.us/img100/9403/43pq2.jpg
http://img226.imageshack.us/img226/4563/44zn1.jpg
http://img327.imageshack.us/img327/6763/45zi1.jpg
http://img19.imageshack.us/img19/5707/46gl2.jpg

on this pics you see the front rough modelled
http://img328.imageshack.us/img328/6489/38zv0.jpg
http://img256.imageshack.us/img256/71/39sh9.jpg
http://img254.imageshack.us/img254/6117/40pk1.jpg
http://img219.imageshack.us/img219/277/41xs4.jpg
http://img331.imageshack.us/img331/8366/62og9.jpg
http://img283.imageshack.us/img283/2361/59ki1.jpg
http://img304.imageshack.us/img304/2619/58ed5.jpg
http://img204.imageshack.us/img204/7079/63dw6.jpg
http://img290.imageshack.us/img290/2706/66tc1.jpg
http://img272.imageshack.us/img272/2921/64xh1.jpg

[fir3b4ll]

i cut the side panel, to mount the shock rifle in it, ....
http://img221.imageshack.us/img221/6480/48sl9.jpg
http://img224.imageshack.us/img224/1281/49bu7.jpg

and now i build the UT2k7 logo for the right sidepanel
http://img320.imageshack.us/img320/1761/27vv2.jpg
http://img184.imageshack.us/img184/1091/51lr5.jpg
http://img272.imageshack.us/img272/3769/53zx4.jpg
http://img99.imageshack.us/img99/6079/54io9.jpg
http://img227.imageshack.us/img227/6590/55ow5.jpg

and some pics of the whole case ....

http://img347.imageshack.us/img347/871/56kg0.jpg
http://img522.imageshack.us/img522/4545/65ov6.jpg
http://img187.imageshack.us/img187/2593/63jx1.jpg
http://img282.imageshack.us/img282/526/61uo9.jpg
http://img186.imageshack.us/img186/3962/60ga7.jpg
http://img221.imageshack.us/img221/1088/57dd3.jpg

[simon275]

Great work. Your modding skills are top notch.

[NocturnaL]

Very nice man, your modeling skills alone impress me by far. The work on it so far looks great, i always love a good PC-Game Themed case. The Doom3D case turned out great, lets see how this one goes :)

[Drac998]

Dude I'm more in love with your pulse rifle model then anything. Awesome stuff.

[fir3b4ll]

@Drac998 :eek:
and thx a lot

[fir3b4ll]

here comes some new stuff, a smal movie of my 3d model

http://rapidshare.com/files/7825742/ut2k7.avi.html

have fun ;)

[simon275]

Man thats a good mock up. Good work :up:

[fir3b4ll]

this is a smal xmas update of the shock rilfe, i prepared it for the paintjob i will start at this weekend

http://img177.imageshack.us/img177/1824/shockrifle977ja5.jpg
http://img170.imageshack.us/img170/6751/shockrifle978rp8.jpg
http://img170.imageshack.us/img170/4429/shockrifle979tc2.jpg
http://img177.imageshack.us/img177/6894/shockrifle980km3.jpg
http://img170.imageshack.us/img170/3645/shockrifle981aq5.jpg
http://img50.imageshack.us/img50/7095/shockrifle982tg5.jpg

hope u enjoy this pics :merry x-mas :eek:

[fir3b4ll]

now it's nerly 100% dry and i masked it,
i will start tomorrow with the paintjob

http://img164.imageshack.us/img164/964/cimg0988resizeresizefd8.jpg

[fir3b4ll]

hi there

i have painted it, then i wiped it off serveral times
to get this effekt ;-)

1st paint
http://img524.imageshack.us/img524/9313/cimg1016resizese3.jpg
1st wiped off
http://img179.imageshack.us/img179/3199/cimg1024resizefh8.jpg
last wiped off ....
http://img105.imageshack.us/img105/3537/cimg1029resizebg0.jpg

hope u like it

[simon275]

Its coming along nicely good stuff. :up:

[DaveW]

Good worklog, nice pics. Double + rep.

-Dave

[EPYK]

looks real nice... i wish i had the time and money to get my various projects started, let alone make a worklog and all that.. props to you...

[NocturnaL]

nice man, the paint job looks sick

[slytherock]

Really nice. Nice painting job :up:
Can't wait to see more of it

[jdbnsn]

Looks great so far. Maybe I missed this but I see a wire connected to that thing. What's it gonna do?

[fir3b4ll]

Maybe I missed this but I see a wire connected to that thing. What's it gonna do?

it's the wiring from the ccfl in the front to the inverter

should look like this ...
http://img412.imageshack.us/img412/3857/lightwk9.jpg :eek:

[jdbnsn]

oh that is gonna be so cool!

[fir3b4ll]

oh that is gonna be so cool!

thanks i hope so :D

[fir3b4ll]

i have painted the shock rifle

u can see the intermediate result here in

a smal video
http://rapidshare.com/files/9391010/shockrifle.avi.html

and here in some pics
http://img147.imageshack.us/img147/3265/cimg1034pd3.jpg
http://img147.imageshack.us/img147/2821/cimg1035av1.jpg
http://img403.imageshack.us/img403/1369/cimg1036ib2.jpg
http://img402.imageshack.us/img402/9391/cimg1037je5.jpg
http://img184.imageshack.us/img184/5339/cimg1038ys5.jpg
http://img149.imageshack.us/img149/7577/cimg1039bo6.jpg
http://img72.imageshack.us/img72/6652/cimg1040zy9.jpg
http://img99.imageshack.us/img99/8526/cimg1041em8.jpg

have fun and a happy new year

[fir3b4ll]

today i decided to repaint the cloudy textured surface

so here are the pics
http://img171.imageshack.us/img171/8145/cimg1043ba8.jpg
http://img166.imageshack.us/img166/9240/cimg1046gm8.jpg
http://img402.imageshack.us/img402/8811/cimg1047ih7.jpg

:dremel:

[jdbnsn]

That came out great! Nice job dude!

[fir3b4ll]

i sew a smal pice of fly screen around the ccfl and painted it with some uv paint

thats the result :dremel:

http://img58.imageshack.us/img58/6109/cimg1062or4.jpg
http://img101.imageshack.us/img101/9572/cimg1063zs2.jpg
http://img169.imageshack.us/img169/2540/cimg1065bg6.jpg
http://img179.imageshack.us/img179/5438/cimg1066xw6.jpg

happy new year

[NocturnaL]

Haha thats bad ass man. I like the light on the end. Happy new years to yourself. Cheers...

[Drac998]

Dude, thats fraking sweet. Using that reinforced piping tube to cover the ccfl is genious. It's electrifying.

[|wm|]

really nice work. You really know what you're doing. The light is the gun rifle is a great detail.

[fir3b4ll]

the rifle is nearly finished now

here are the pics

http://img296.imageshack.us/img296/4717/cimg1075sy7.jpg
http://img510.imageshack.us/img510/8999/cimg1078gp2.jpg
http://img398.imageshack.us/img398/7952/cimg1079kj8.jpg

:rolleyes:

[d_stilgar]

Very nice. Keep up the good work.

[slytherock]

I'm without words... :up:

[fir3b4ll]

the front assume shape

http://img222.imageshack.us/img222/2629/cimg1052bx0.jpghttp://img248.imageshack.us/img248/310/34pq8.jpg

[DaveW]

+Rep for fir3ball!

Keep it up!

-Dave

[GT40_GearHead]

wtf man ! what kind of work do you do ? because you shure have skills !!!


+rep

[sirkillalot617]

Really like your work your very skilled at molding dont surpose you would consider giving me a few tips

[fir3b4ll]

thx at all ;)



Really like your work your very skilled at molding dont surpose you would consider giving me a few tips

just ask what exactly you wanna know and i help you, if i can :D

[sirkillalot617]

well id like some tips on how to make it look like a rocky

[fir3b4ll]

for a rocky surface
i would use some polyurethane foam and then a sharp knife to form the foam
i have used some spackle to fill the rought surface of the cutted foam in one of my mods, and it works well

http://img312.imageshack.us/img312/5903/cimg0009rk9.jpg
http://img376.imageshack.us/img376/9946/cimg0013ji8.jpg
http://img161.imageshack.us/img161/7256/cimg0014vi9.jpg

now i would use different colors in a paint technique

-> accentuate
- ground with a dark paint
- slightly paint highlights with a bright color and few paint on the pencil
- finish with some clear varnish


have fun .... :D

[sirkillalot617]

thank you thats helped me a lot now i just have to find some of that foam

+REP

[armadilloben]

work of art dude +rep

DAVE I DEMAND THIS BE FEATURED! lol

[jdbnsn]

DAVE I DEMAND THIS BE FEATURED! lol

Making demands of DaveW? My Lord, are you crazy? He'll destroy us all! I would put it like; Ahhem...uh...Dave? Excuse me sir, are you busy cause I can come back if you are, no? Ok. Well it's just that...I mean there's this...well you should really see...how should I put this...THIS BOMB-ASS MOD WITH LAZER BLASTERS AND ALIEN ARMOUR AND, AND, AND, OH MY LORD IT'S TOTALLY FEATURE MATERIAL MAN! Whew, sorry I seem to have lost myself for a moment. Must have been the lazer gun...

[fir3b4ll]

@sirkillalot617

i bought it here in germany in a run-of-the-mill building centre

;)

[sirkillalot617]

kk i have a look on the industrial estate thanks

[DaveW]

It's a great mod, but it's not quite featured worklog material yet-remember, the quality of your mod isn't that important in getting a featured worklog. To get into featured, this worklog needs more work-in-progress photos, more information on how it was built, painted, how the lighting was wired up, techniques, etc.

At the moment, it's too heavy on 'today's progress' shots, if you know what i mean. Sorry if i sound harsh here, but I'm being honest in the hope that it helps you improve!

I'll agree it's a good looking mod though, and I'm following it closely.

-Dave

[crazybillybob]

Nice looking mod. I'd really like to see how you did the carving of the Shock Rifle, and How you laid it out. Is it done by hand (knives) or by machine (dremel, saw,etc). The Foam your using does it come in sheets or a can? What is spackle?? (auto body filler, drywall compound, plaster??). The Paint job is great! Do you use Rattle cans (spray paint), is it all Airbrushed, or hand brushed?
Sorry to be prying I'm just looking at my next mod and have some very detailed peices planed and what to find out how others are doing it.

Thanks,
CrazyBillyBob

[NocturnaL]

very very nice work, i know i wouldnt wonna get shot with that rifle! lawl

[armadilloben]

It's a great mod, but it's not quite featured worklog material yet-remember, the quality of your mod isn't that important in getting a featured worklog. To get into featured, this worklog needs more work-in-progress photos, more information on how it was built, painted, how the lighting was wired up, techniques, etc.

At the moment, it's too heavy on 'today's progress' shots, if you know what i mean. Sorry if i sound harsh here, but I'm being honest in the hope that it helps you improve!

I'll agree it's a good looking mod though, and I'm following it closely.

-Dave

okie dokie dave i get watchya mean more info is always good and i love pics sometimes ill go through magazines (my dad probably hasnt seen any of his pc mags for the past 2 years) and me reading the article normally depends on if i like the pics (im very visual as u can see)
oh btw do u have the thread suscribed?

[fir3b4ll]

here are some pics of my equipment

1 are a selection of my demel tools
2 some brushed from revell for the paintjob with email color
3 more brushes, i use normaly with watercolor
4 my collection of revell email color
5 water color
6 eddings in different sizes (0.5mm - 2mm) and colors (black, white, and red)
7 some masking tape
8 a jig
9 my uv nailpaint (transparent without light ;))
10 superglue, one the left a noname and one the right one from pattex
11 the polyurethane foam
12 auto body filler

http://img224.imageshack.us/img224/2383/cimg1085df0.jpg

http://img172.imageshack.us/img172/2857/cimg1086ii0.jpg

1 a mini led lamp to test come light ;)
2 the revell brushes
http://img69.imageshack.us/img69/3928/cimg1087jy5.jpg

the glue, foam and the filler with accelerator
http://img241.imageshack.us/img241/9301/cimg1088cu8.jpg

http://img443.imageshack.us/img443/4571/cimg1089ck2.jpg

and the dremel tools
http://img224.imageshack.us/img224/8526/cimg1090hz9.jpg

here u can find some spackle http://www.molto.de/detail_info.html?pid=7

so now i go to have lunch
cul

[fir3b4ll]

@crazybillybob

the rifle is done by both,
-the body (wood) is cut by a saw, shaped by a dremel clone and a rasp / file
-i put some polyurethane foam on it and cut it by knife
-to make the shape plain i used the auto body filler
-now i made the holes for the iron and the ccfl (with my dremel and a milling cutter tool) i mount it and fix it with some auto body filler
-paint preparing with wood primer i paint by brush

paintjob (done by brush)
-after preparing, i masked with the black tape (real insulating tape but it worked for me)
-i paint it with some watercolor but it doen't work well the paint become crack and so i tryed the clear the color with a wet towel (the cloudy pics are the result)...
-so i decided to paint over with my email color
-after demasking, i paint the masked area
-now some finetuning with my eddings and this jig
http://www.rumold-stuttgart.de/images/2916.jpg (http://www.rumold-stuttgart.de)
but the jig was to big to use it, i could only exert it for the black dots on the top side

hope u catch it

[dgrmkrp]

nice assortment of colors and brushes... wish i had a collection as big as you :)
if i'm not too indiscreet, what do you do in real life? designer? architect? :) cause you have some cool tools :)

also, the project is coming along nicely.

[crazybillybob]

Thanks, that helps.
For help in the future Clear coat fogs if there is to much moisture in it. With all that spackle and then using water colors you'll have to wait for days for it to dry out enough not to fog.

What techniques do you use when painting? (dry brush, washes, etc) can you give us some examples of where you used them, and how to do it (this way we can learn how to give our mods that little extra that make them look really good!)

The pic of the tools and paints helped clear up some questions. Keep up the good work.

CrazyBillyBob

[fir3b4ll]

@crazybillybob

i will post some expressions maybe next weekend
the last 3 days i was in the hospital and now i have to rest at home

cu soon

[crazybillybob]

Fireball,
Rest up buddy!!! Get your strength back then mod. We can wait :)

CrazyBillyBob

[GT40_GearHead]

histpotal.....?!

what for???

[fir3b4ll]

i had a venous thrombosis,
it must be resect, That hurts!

..... :(

[slytherock]

Ouch, that's hard stuff (www.nlm.nih.gov/medlineplus/ency/article/000156.htm), hope everything will go fine. Keep watching us in here, we'll keep you entertained :)

[fir3b4ll]

u can see here 2 pics of details i painted on the shock rifle

i prepainted with my white edding and highlighted it with a textmarker ;)
http://img247.imageshack.us/img247/3940/cimg1094fu7.jpg
http://img141.imageshack.us/img141/5681/cimg1093qw0.jpg

and 2 of the progress from the front
i polished it with my demel
http://img444.imageshack.us/img444/9026/cimg1081oz7.jpg
http://img172.imageshack.us/img172/593/cimg1083ss3.jpg

furthermore a nice vid of the shock rilfe, highlighted by my little ledlamp (uv)
Shock Rifle Lighted ... (http://rapidshare.com/files/11357545/shockrifle2.rar.html)

:D

[fir3b4ll]

so thats the starting position
http://img440.imageshack.us/img440/4389/cimg1105ip4.jpg

i wanna describe howto modelling, at the following pic you see 3 areas
http://img150.imageshack.us/img150/497/cimg1105markiertfe9.jpg
i want to sand the red area
i want to make some structure on the leaves (green area)
i want to create another interesting structure on area blue


i used some sandpaper and put it around a pice of lumber

http://img150.imageshack.us/img150/1560/cimg1106fi7.jpg
and removed careful layer for layer ....
http://img299.imageshack.us/img299/3568/cimg1107ne5.jpg
a few holes remain...
http://img407.imageshack.us/img407/7475/cimg1109if4.jpg
so i decided so fill with the spackle
http://img181.imageshack.us/img181/9048/cimg1112uo8.jpg

http://img143.imageshack.us/img143/8809/cimg1110dc9.jpg
http://img407.imageshack.us/img407/7039/cimg1111hx3.jpg

i found a drinking straw with a hinge :eek: and decided to use the hinge to make the structure of the leaves
http://img246.imageshack.us/img246/9874/cimg1113wc0.jpg

i put some spackle sausages on the place a want, waited a few minutes (to hardening) and then i put carefully the hinge on the sausages
http://img179.imageshack.us/img179/6721/cimg1116go1.jpg
you can see on left side the drinking straw done but on the right side not
http://img155.imageshack.us/img155/7987/cimg1117qx5.jpg
http://img288.imageshack.us/img288/2347/cimg1118ed4.jpg
http://img49.imageshack.us/img49/7760/cimg1119hz4.jpg

i used a old chiller to groove the blue area
now i put some spackle on it and pulled the chiller in the direction i want over it
http://img134.imageshack.us/img134/967/cimg1115dk2.jpg
http://img147.imageshack.us/img147/9468/cimg1121rw0.jpg
http://img411.imageshack.us/img411/9200/cimg1122rp0.jpg
now are both sides done
http://img181.imageshack.us/img181/2176/cimg1123ys4.jpg
http://img180.imageshack.us/img180/3323/cimg1124ek9.jpg

the whole front and u can see the filling (red area is done), the leaves and the blue area is structured

http://img49.imageshack.us/img49/820/cimg1126zy9.jpg
http://img285.imageshack.us/img285/6852/cimg1128od3.jpg

.... Stay tuned! ....

[slytherock]

Nice worklog, really interesting. Still good work and fun to see.

+rep for the worklog :)

[fir3b4ll]

after the front prepairing was finished we had this
http://img295.imageshack.us/img295/707/cimg1136md4.jpg
http://img143.imageshack.us/img143/6127/cimg1137gk7.jpg
http://img181.imageshack.us/img181/5416/cimg1138yb3.jpg
http://img64.imageshack.us/img64/7200/cimg1139xc2.jpg

and we want this paintjob ...
http://img248.imageshack.us/img248/310/34pq8.jpg

i paint all the dark colors (except at the green middle) on there place the have a base coat (used watercolor at all)
http://img295.imageshack.us/img295/2268/cimg1144ch3.jpg
http://img136.imageshack.us/img136/9933/cimg1145nw5.jpg
http://img247.imageshack.us/img247/3508/cimg1146tj8.jpg

the grounding is finished and i add some effects and highlights now
http://img181.imageshack.us/img181/5931/cimg1147dp2.jpg
http://img292.imageshack.us/img292/6185/cimg1148lk9.jpg
http://img442.imageshack.us/img442/4728/cimg1149ka0.jpg

i did some highlights at the red area
http://img72.imageshack.us/img72/3550/cimg1152maskedpq0.jpg

i made a movie of the highlight process at the side
http://rapidshare.com/files/11976068/frontpaintjob.rar.html (Paintjob)
at this technique u have to make sure, that you have a dry brush with only a least color on it

thats the result
http://img101.imageshack.us/img101/8212/cimg1156er5.jpg
http://img143.imageshack.us/img143/5349/cimg1157hr9.jpg
http://img413.imageshack.us/img413/2816/cimg1159hg4.jpg
http://img175.imageshack.us/img175/1073/cimg1161yw0.jpg
http://img101.imageshack.us/img101/2241/cimg1162sg8.jpg
http://img244.imageshack.us/img244/1985/cimg1167xf9.jpg

i painted some effects on the leaves and the middle stripe (i used my white edding)
http://img413.imageshack.us/img413/49/cimg1180dg8.jpg

i put some details on the technical thing in the middle
http://img442.imageshack.us/img442/5930/cimg1176sq4.jpg
http://img406.imageshack.us/img406/9673/cimg1177tg8.jpg
http://img136.imageshack.us/img136/2921/cimg1178vb4.jpg

afterwards i highlighted the hump on the buttom and the big humps at the head (black and white edding used)
http://img178.imageshack.us/img178/6290/cimg1174ur9.jpg
http://img403.imageshack.us/img403/5518/cimg1175ds6.jpg

[fir3b4ll]

final pics .... for now
http://img440.imageshack.us/img440/7447/cimg1182rc0.jpg
http://img143.imageshack.us/img143/4787/cimg1183up7.jpg
http://img136.imageshack.us/img136/4217/cimg1184hn8.jpg
http://img405.imageshack.us/img405/2011/cimg1185vn8.jpg
http://img404.imageshack.us/img404/7266/cimg1186zi1.jpg




have fun with the pic's :)

[JRSCAcura]

I'm guessing this is modeled on a game? What is the thing you painted supossed to be?

[GT40_GearHead]

I'm guessing this is modeled on a game?

ut2k7=unreal tourament 2007

concentrate man!

[fir3b4ll]

lol, thanks GT40_GearHead for explaning my abbreviation ;)

[GT40_GearHead]

the pleasure was all mine...

ouu, and a +rep to for a grea update


ps: I see some differances starting to apear betwin the render and the front cover....
there where like two spinal coard betwin the two large donut things

[fir3b4ll]

ps: I see some differances starting to apear betwin the render and the front cover....
there where like two spinal coard betwin the two large donut things

i know,
as i noticed that between the donuts (you called) was not enough for my design ... i pimped it with a piece of an superstar destroyer model, i bought a long time ago and so it does not 100% match

hope u like it even so :)

[GT40_GearHead]

its great if I do say so myself

I was just making shure my eyes are not fouling me

[fir3b4ll]

i added some detail to the shock rilfe, composed of a cable clip (uv aktive) and smal pieces of my superstar destroyer

some pics of the details ...

http://img180.imageshack.us/img180/232/cimg11954eo.jpg
http://img334.imageshack.us/img334/1470/cimg12009hl.jpg


the final pics
http://img306.imageshack.us/img306/9238/shockrifle64ms.th.jpg (http://img306.imageshack.us/my.php?image=shockrifle64ms.jpg)
http://img227.imageshack.us/img227/6413/shockrifle28nq.th.jpg (http://img227.imageshack.us/my.php?image=shockrifle28nq.jpg)


:eek:

[DaveW]

That looks pretty damn neat. +Rep.

-Dave

[b4i7]

looking very nice.....keep up the awesom work!

[Drac998]

Man it's gonna be hard for you to resist pulling that thing out of your case and holding it.

[fir3b4ll]

@all
thanks a lot for the great feedback

@Drac998
i try to control myself :twisted:

[GT40_GearHead]

why not a buy a paintball gun and stealth it, to look like that!

imagine going to a LAN, and someone starts be a dick, just imagine....:devious: ...:dead: .....:p .....:banana:

[Scotty]

This is soo cool. It should be a featured Worklog!

*'Chants' Feature It! Feature It!*

+Rep Dude its awesome.

[fir3b4ll]

midway renamed the game Unreal Tournament 2007 into Unreal Tournament III
and they changed the logo into
this
http://img183.imageshack.us/img183/5356/ut3logolp3.jpg (http://www.unrealtournament2007.com/)

so i have to redo my,

http://img320.imageshack.us/img320/1761/27vv2.jpg


damn that suxx .... memo to me -> before you do a themed logo, wait until the game is released and it's name is fixed .... !

[GT40_GearHead]

damn that sucks man!

[Produkt]

:( sorry about that man, you can still keep your logo. Unno... it would make a cool 3d poster!

[Drac998]

well at least you can hang that up on your wall as a trophy.

fir3b4ll whats the actual scale of your pulse rifle?

[fir3b4ll]

@Drac998
i wanna try to change only the 2007 into the III

the shock rilfe is about 44cm ~ 17.3 inch
-> it's sized to fit the sidepanel

:D

[fir3b4ll]

i started with modelling some acryl shapes
now i drilled some holes and put pieces of wire into the holes

http://img254.imageshack.us/img254/7605/cimg1259kv2.jpg

this takes a lot of time, (i drilled 73 holes into one corner :) )
a little spackle later ....

http://img260.imageshack.us/img260/5647/cimg1258du5.jpg
http://img444.imageshack.us/img444/9614/cimg1257pf3.jpg

one corner done and the second started
http://img166.imageshack.us/img166/1835/cimg1260bm9.jpg

now i tried to put anything together
http://img299.imageshack.us/img299/7205/cimg1264by5.jpg
http://img256.imageshack.us/img256/9080/cimg1265up2.jpg

Stay tuned! 8)

[progbuddy]

wow. Your like the master of organic shapes. Awesome job on the front and the rifle. Now just add something crazy. +rep

[luciusad2004]

TOP NOTCH work. This is awesome. Ive never played unreal but this is such a great and unique design. +rep.

[Doomfest]

OH- in case you don't have these already, I just got these kickass new screens of UT3. A trailer, too. Trust me, you'll like these:

http://beyondunreal.com/daedalus/singlepost.php?id=10184

Source: beyondunreal

[fir3b4ll]

@all thx again 4 the responses ...

@doomfest: yes i know this vid, :D

[fir3b4ll]

have fun with my new artwork ;)

http://img174.imageshack.us/img174/7554/200702020749422h50m47sfj9.jpg

[fir3b4ll]

the 2 corners with the cables are done

http://img175.imageshack.us/img175/9553/cimg1312pk6.jpg

closer
http://img226.imageshack.us/img226/544/cimg1315hb3.jpg
http://img152.imageshack.us/img152/6009/cimg1317bg0.jpg

here can you see the back of the sidepannel, in the middle of the pannel is the strong holder for the shock rifle, it will screwed on there
http://img249.imageshack.us/img249/9733/cimg1319df6.jpg

on the corner you can see the bended cables (copper wire)
http://img127.imageshack.us/img127/8605/cimg1320ll9.jpg

i bended those by a flat pliers
http://img226.imageshack.us/img226/4285/cimg1321ar5.jpg


more tomorrow, final pics of the front pannel ;)

[fir3b4ll]

1st i did paint some clear varnish over the water color

http://img406.imageshack.us/img406/5858/cimg1284fq3.jpg
http://img484.imageshack.us/img484/7637/cimg1289yq3.jpg

the result wasn't satisfying at all, so i painted the big two humps at the top and the hump down with my email color (revell)

http://img476.imageshack.us/img476/6884/cimg1299ds2.jpg

therefore i had to repaint the highlight there again, on the down hump i did today (pics come tomorrow)

thats the pics for now :D

http://img178.imageshack.us/img178/7120/cimg1324ua4.jpg
http://img117.imageshack.us/img117/4782/cimg1325le4.jpg
http://img443.imageshack.us/img443/9338/cimg1326zk3.jpg
http://img297.imageshack.us/img297/6606/cimg1327js7.jpg
http://img176.imageshack.us/img176/8419/cimg1328yf0.jpg
http://img252.imageshack.us/img252/2812/cimg1329ga4.jpg
http://img250.imageshack.us/img250/2626/cimg1330ri1.jpg
http://img411.imageshack.us/img411/4600/cimg1331tr0.jpg
http://img125.imageshack.us/img125/4632/cimg1332pk0.jpg
http://img144.imageshack.us/img144/2101/cimg1333la7.jpg
http://img408.imageshack.us/img408/627/cimg1334ea6.jpg
http://img117.imageshack.us/img117/9231/cimg1335oc6.jpg
http://img363.imageshack.us/img363/1184/cimg1336wb0.jpg

[Ichbin]

All those bent wires look lik playdo coming out of a shape or somethin.

Sehr gut!

Keep up the fantastic work!

[fir3b4ll]

sorry for the downtime, i had serveral things to do at work, at home ....
so i had no much time to write here and make pics

but i'm back again and here are the pics for now


i have drilled serveral things for the side panel, e.g. some circles for the corner and the motor in the middle ...

furthermore i filled the gap bitween the shock rifle and the panel with acryl

http://img89.imageshack.us/img89/904/cimg1391bl9.jpg
http://img89.imageshack.us/img89/8279/cimg1392qa8.jpg
http://img89.imageshack.us/img89/2926/cimg1393ep0.jpg
http://img89.imageshack.us/img89/4753/cimg1395zi4.jpg
http://img149.imageshack.us/img149/5853/cimg1396nh7.jpg
http://img180.imageshack.us/img180/3241/cimg1397td4.jpg
http://img149.imageshack.us/img149/663/cimg1398uz7.jpg
http://img149.imageshack.us/img149/7529/cimg1399fq1.jpg
http://img89.imageshack.us/img89/81/cimg1400lp4.jpg
http://img89.imageshack.us/img89/2574/cimg1401wl2.jpg
http://img242.imageshack.us/img242/3624/cimg1402wl2.jpg
http://img149.imageshack.us/img149/7576/cimg1403sf3.jpg
http://img149.imageshack.us/img149/7669/cimg1404uj2.jpg
http://img242.imageshack.us/img242/8932/cimg1405li2.jpg
http://img89.imageshack.us/img89/8523/cimg1406td9.jpg
http://img89.imageshack.us/img89/4026/cimg1407ak1.jpg

stay tuned

[Drac998]

awesome work man, the sculpting on the filler are those details that make this look more like a sculpture then a pc case. +rep

[sirkillalot617]

As always brillent work this should be In the featured section me thinks

[fir3b4ll]

i made a short video of the sidepanel
if i buy new black watercolor and paintcleaner today, i will start painting by the end of this week

here is the promised video
http://rapidshare.com/files/18670751/sidepanel1.1.avi.html

cu :D

[Slatter]

unreal dude...

[DaveW]

Coming along great, and your worklog quality has vastly improved as well. Keep up the good work!

-Dave

[NocturnaL]

Wow, thank you for an update :) looks great so far man, I'm still getting over that gun. It looks great +rep

[fir3b4ll]

the last 3 days i spent time 4 the paintjob

here are the resulting pics, till now ....


i did the basepaint again with the watercolor in 2 layers, black and magenta
i tryed to cover all the white gaps
http://img50.imageshack.us/img50/8418/66665010rt1.jpg
http://img249.imageshack.us/img249/5965/19133875xb1.jpg
http://img176.imageshack.us/img176/462/46742674zq4.jpg
http://img177.imageshack.us/img177/1176/60517284id3.jpg
http://img140.imageshack.us/img140/293/73096524wb5.jpg
http://img413.imageshack.us/img413/9043/94628078ec5.jpg
http://img441.imageshack.us/img441/8198/23791436wn5.jpg
http://img263.imageshack.us/img263/7904/73071549cd4.jpg
http://img177.imageshack.us/img177/3992/10ms4.jpg
http://img413.imageshack.us/img413/7828/11nm9.jpg
http://img170.imageshack.us/img170/1035/12rb0.jpg

i paint the acryl with my revell email color (black and silver on this corner)
http://img170.imageshack.us/img170/270/14mo6.jpg
at this corner i paint the area between the wires with the revell silver color
http://img180.imageshack.us/img180/6582/15yb0.jpg
http://img250.imageshack.us/img250/2604/16jh6.jpg

the accentuating is done by the watercolor in white and a bit of magenta
http://img175.imageshack.us/img175/9718/17rf6.jpg
painting the wires and the gaps between the wires
http://img238.imageshack.us/img238/8198/18xi3.jpg
http://img440.imageshack.us/img440/6684/19pw0.jpg
http://img50.imageshack.us/img50/8632/20ds8.jpg
http://img144.imageshack.us/img144/6708/21ks5.jpg
http://img410.imageshack.us/img410/6641/22oc7.jpg
http://img291.imageshack.us/img291/1149/23yu2.jpg
http://img413.imageshack.us/img413/8492/24ki6.jpg
http://img518.imageshack.us/img518/9353/25zp5.jpg

[fir3b4ll]

some macro impressions

have fun ;)

http://img144.imageshack.us/img144/1628/26ic4.jpg
http://img337.imageshack.us/img337/501/27lv4.jpg
http://img126.imageshack.us/img126/7007/28eb2.jpg
http://img442.imageshack.us/img442/3992/29nc5.jpg
http://img176.imageshack.us/img176/5222/30mu8.jpg

[fir3b4ll]

i added some details to the sidepanel, with my white and black eddings

http://img295.imageshack.us/img295/5093/cimg1486co7.jpg
http://img295.imageshack.us/img295/8784/cimg1483gs2.jpg
http://img139.imageshack.us/img139/8020/cimg1487km8.jpg
http://img87.imageshack.us/img87/8703/cimg1488sw4.jpg
http://img295.imageshack.us/img295/1611/cimg1489qo0.jpg

:D

[Ichbin]

Bravo man, Braaaavo. This should definitally go under featured.

[fir3b4ll]

hi

this week i put clear varnish(revell email clear) on the sidepanel
i did it 2 time with a smal brush, to cover all the ups and downs of my structure
http://img153.imageshack.us/img153/6840/cimg1491ki7.jpg
http://img221.imageshack.us/img221/6355/cimg1492hw7.jpg
http://img225.imageshack.us/img225/6198/cimg1493ik9.jpg
http://img85.imageshack.us/img85/8581/cimg1494ez4.jpg
http://img149.imageshack.us/img149/7829/cimg1495tw8.jpg
http://img184.imageshack.us/img184/9862/cimg1496ve8.jpg
http://img410.imageshack.us/img410/1559/cimg1497nh8.jpg

after the drying, i made a mount test with the shock rifle
http://img177.imageshack.us/img177/1079/cimg1502du8.jpg
http://img179.imageshack.us/img179/413/cimg1503ap4.jpg
http://img410.imageshack.us/img410/3092/cimg1504go9.jpg
http://img171.imageshack.us/img171/3995/cimg1506nk2.jpg
http://img221.imageshack.us/img221/9586/cimg1507ya7.jpg

test in the darkness, with the shock rifle light ...
http://img163.imageshack.us/img163/4919/cimg1518ii6.jpg
http://img220.imageshack.us/img220/4309/cimg1519lx5.jpg
http://img153.imageshack.us/img153/7128/cimg1521gg5.jpg
http://img176.imageshack.us/img176/2013/cimg1523mo7.jpg
http://img221.imageshack.us/img221/4003/cimg1524if3.jpg
http://img153.imageshack.us/img153/7553/cimg1528rd3.jpg

hope u enjoy :)

[Ichbin]

Wow man...That shock rifle...just ...wooow...+rep for all that man. Great work

[M!ST!CX]

exelent work,you deserve more than one +rep,but i cant give you more that one,you know that, so from me +rep;)

[jdbnsn]

That is looking sweet!

[NocturnaL]

Definitely looks great man. I cant wait to see the PC put together, cheerz :)

[fir3b4ll]

these are the final pics of the left panel
i added the last details on the corners

remember the drawing ;)
http://img268.imageshack.us/img268/2275/20vs3.jpg
i think it's not so bad
http://img89.imageshack.us/img89/9669/cimg1530qu1.jpg

the signs on the up right and down left corner are done by an blue edding Permanent Marker 3000, a steady hand and many patience
http://img489.imageshack.us/img489/9076/cimg1534oo9.jpg
http://img442.imageshack.us/img442/4489/cimg1537tz3.jpg

i added some more structure under the cables
http://img395.imageshack.us/img395/6731/cimg1535lo6.jpg
http://img132.imageshack.us/img132/9797/cimg1539fx4.jpg

final wallpaper ;)
http://img474.imageshack.us/img474/7937/cimg1543rw8.th.jpg (http://img474.imageshack.us/my.php?image=cimg1543rw8.jpg)
http://img474.imageshack.us/img474/4285/cimg1542oj9.th.jpg (http://img474.imageshack.us/my.php?image=cimg1542oj9.jpg)

have fun and enjoy :D

[xRyokenx]

Oh, man, this case is sweet. Hey Crimson, it looks like someone has thrown down the gauntlet when it comes to the position of "best" modder here.














Just kidding :D I say you're both about equal in skill, and this and the Doom 3 case are equal, but incomparable, this one is quite organic, curvy,and has a sweet gun; Doom 3 is metallic, machine-ey, and has moving parts.

Many kudos to you fir3b4ll.

EDIT: You should make the plasma rifle from Halo next, that would be awesome. After seeing that shock rifle, the plasma rifle should be quite easy.

[fir3b4ll]

hi

last week i made holidays
but this week i did the logo and the paintjob of the other sidepanel


i cut the "3" for the logo, this is the 1st fitting test
http://img164.imageshack.us/img164/7104/cimg1549zp5.jpg
http://img258.imageshack.us/img258/1949/cimg1550mn7.jpg

now i sanded the acryl, in order that the color stick
http://img259.imageshack.us/img259/4280/cimg1551ta7.jpg

and painted the acryl with my email color in red and black
http://img252.imageshack.us/img252/5822/cimg1553uq8.jpg
http://img67.imageshack.us/img67/2228/cimg1555yr4.jpg

during drying the color, i cut the "U" of the logo -> the new version is bigger than the old one
http://img252.imageshack.us/img252/5737/cimg1558ep5.jpg
http://img294.imageshack.us/img294/1073/cimg1560oy5.jpg

now it fits
http://img131.imageshack.us/img131/2605/cimg1561th3.jpg

i also cut and mount the half-circles of the sidepanel
http://img394.imageshack.us/img394/3285/cimg1576vx0.jpg

this is my superglue
http://img164.imageshack.us/img164/8572/cimg1579it6.jpg

the mounting ...
http://img442.imageshack.us/img442/8515/cimg1580zh8.jpg
http://img380.imageshack.us/img380/6883/cimg1584sk9.jpg

it's done ;)
http://img126.imageshack.us/img126/1716/cimg1585zc0.jpg

so, the color was well dried
http://img488.imageshack.us/img488/8044/cimg1589lf0.jpg

after painting the sidepanel analog to the other, i put the logo together,
replaced the old smal "U" with the big one and made the first test
http://img341.imageshack.us/img341/8287/cimg1703kb4.jpg
http://img452.imageshack.us/img452/2446/cimg1704ar0.jpg
http://img67.imageshack.us/img67/9791/cimg1705yj5.jpg
http://img127.imageshack.us/img127/9407/cimg1706zz1.jpg
http://img258.imageshack.us/img258/130/cimg1708cq1.jpg
http://img113.imageshack.us/img113/8655/cimg1709ay2.jpg
http://img339.imageshack.us/img339/2092/cimg1710ta6.jpg
http://img410.imageshack.us/img410/356/cimg1711lp2.jpg
http://img67.imageshack.us/img67/707/cimg1712at4.jpg

So far, so good.
cu ;)

[Drew]

Really starting to come together. +reps for you.

[fir3b4ll]

thx guys ;)

here u can see a few pictures and a short video of alle coming together

pictures:
http://img162.imageshack.us/img162/765/cimg1724hc8.th.jpg (http://img162.imageshack.us/my.php?image=cimg1724hc8.jpg)
http://img300.imageshack.us/img300/3655/cimg1725fk1.th.jpg (http://img300.imageshack.us/my.php?image=cimg1725fk1.jpg)
http://img526.imageshack.us/img526/9657/cimg1733wq9.th.jpg (http://img526.imageshack.us/my.php?image=cimg1733wq9.jpg)
http://img390.imageshack.us/img390/1184/cimg1731gp8.th.jpg (http://img390.imageshack.us/my.php?image=cimg1731gp8.jpg)
http://img292.imageshack.us/img292/1940/cimg1727je5.th.jpg (http://img292.imageshack.us/my.php?image=cimg1727je5.jpg)
http://img249.imageshack.us/img249/687/cimg1728pk5.th.jpg (http://img249.imageshack.us/my.php?image=cimg1728pk5.jpg)
http://img241.imageshack.us/img241/1418/cimg1730mb5.th.jpg (http://img241.imageshack.us/my.php?image=cimg1730mb5.jpg)
http://img396.imageshack.us/img396/3785/cimg1732vh1.th.jpg (http://img396.imageshack.us/my.php?image=cimg1732vh1.jpg)

and the video:

here
Oh1PxzM-oNE
or
@youtube
UT3 Casemod (http://youtube.com/watch?v=Oh1PxzM-oNE)
and higher quality
@rapidshare
ut3 Casemod (http://rapidshare.com/files/23777061/ut3case.rar.html)

left to do
- shaping the top i try like this updated render ....
http://img248.imageshack.us/img248/299/ut3topjg2.th.jpg (http://img248.imageshack.us/my.php?image=ut3topjg2.jpg)

- painting the case inside
i don't know which color, red to make a contrast or blue to fit the theme .... any suggestions ?

- painting the case behind the front "door"
i prefer black .... what about you ?

- and some things i have forgotten

[DaveW]

Nice dude! You know we have youTube tags on the forums now, you can embed your youTube videos directly into your post!

-Dave

[fir3b4ll]

Nice dude! You know we have youTube tags on the forums now, you can embed your youTube videos directly into your post!

-Dave

thx dave,
new tags? ohh great, i try it, thanks for the hint ;)

[Drac998]

Insane Skillz bro, it looks like your concept art. +rep

[Ichbin]

My suggestion would to make it a darker UV blue, and possibly put in a black light. Thatd might make it look cool.

[fir3b4ll]

i decided to add a typ of alien styled head (skull) on top of the case in the hollow

i bought one a long time ago

but it's not as perfect as i want
http://img244.imageshack.us/img244/6893/cimg1739on4.jpg
http://img442.imageshack.us/img442/5582/cimg1738uo8.jpg

so i decided to cut the underjaw and add some filler :naughty:
here you see how it looks like till now

xyUFkOgS7lc

now i have to find some eyes :D

[fir3b4ll]

i'm back

sorry guys i was 2 weeks in a it-boot-camp ;) (mircosoft certification)

i already did 2 things, i shaped the top and i painted one layer of the base color
for the inside of my case

i shaped the cave with polyurethane foam, to get a basic form
i put some cable on the foam to make it crazy ;)
now i used a old pantyhose -> pulled it over the foam and put some polyester resin molding material over it

http://img517.imageshack.us/img517/9665/cimg1829jw5.jpg
http://img513.imageshack.us/img513/3350/cimg1830eh5.jpg
http://img353.imageshack.us/img353/1059/cimg1831qd6.jpg
http://img169.imageshack.us/img169/9468/cimg1835yx9.jpg
http://img440.imageshack.us/img440/412/cimg1836zy9.jpg

the holding for the tubes will be some pices of my lego collection :)
http://img515.imageshack.us/img515/503/cimg1832zs1.jpg

i decided to use 2 color for the inside of my case, black and a uv blue
i put the black on the back, the front (behind the door) and on the right side behind the
mainboard mounting

http://img513.imageshack.us/img513/631/cimg1827yj1.jpg
http://img291.imageshack.us/img291/1308/cimg1833zn7.jpg

the uv blue i would use at the inside, the opacity not as desired and unfortunately the color was empty before i cover the
entire interior once, damn ... so i have to order more, much more and do it again ;)
http://img174.imageshack.us/img174/4281/cimg1834dw9.jpg

thats all, till now

[Cagedconnerman]

welcome back :) looks great along with the rest of it :)

[fir3b4ll]

2 hours of wiring, mounting and combining and the skull has yellow eye's
i made the first functional check see it here

MrKoKHbwIrA

[Drew]

Them eyeballs is freaky.

+reps for freakiness.

[fir3b4ll]

hi there
damn that suxx, i had my sd broken and 30 worklog pic's missing

last weekend i got at last a new sd card, furthermore the hardware for the ut3 mod has arrived

i try to resume what happend on the missing pics :(

http://img515.imageshack.us/img515/503/cimg1832zs1.jpg
first i use the lego ufo to make a little mountain in the front of the top
the i put some filler on the surface of the top
so i could fix the tubes between the cave and the lego ufo


now the painting starts, again i used the water color to ground the surface
i used 3 main color on top, the theme color black mixed with magenta and some blue on the legoufo
http://img294.imageshack.us/img294/4248/cimg1927dm6.th.jpg (http://img294.imageshack.us/my.php?image=cimg1927dm6.jpg)
http://img296.imageshack.us/img296/7370/cimg1928oa3.th.jpg (http://img296.imageshack.us/my.php?image=cimg1928oa3.jpg)
http://img259.imageshack.us/img259/9716/cimg1929ua6.th.jpg (http://img259.imageshack.us/my.php?image=cimg1929ua6.jpg)

now the accentuate starts with some white watercolor and for some special effects with an white edding
now the clear varnish painted and the top is nearly done

i painted the tubes with my email color in black and silver (it's empty, have 2 buy new one this week)
-> thats why it's not finished 100%

http://img524.imageshack.us/img524/1818/cimg1930cb5.th.jpg (http://img524.imageshack.us/my.php?image=cimg1930cb5.jpg)
http://img517.imageshack.us/img517/2867/cimg1932ps9.th.jpg (http://img517.imageshack.us/my.php?image=cimg1932ps9.jpg)
http://img503.imageshack.us/img503/8956/cimg1933ap1.th.jpg (http://img503.imageshack.us/my.php?image=cimg1933ap1.jpg)
http://img170.imageshack.us/img170/3589/cimg1934rj1.th.jpg (http://img170.imageshack.us/my.php?image=cimg1934rj1.jpg)
http://img508.imageshack.us/img508/1412/cimg1935pc6.th.jpg (http://img508.imageshack.us/my.php?image=cimg1935pc6.jpg)
http://img512.imageshack.us/img512/119/cimg1936xw4.th.jpg (http://img512.imageshack.us/my.php?image=cimg1936xw4.jpg)
http://img518.imageshack.us/img518/6716/cimg1937kg9.th.jpg (http://img518.imageshack.us/my.php?image=cimg1937kg9.jpg)
http://img512.imageshack.us/img512/1599/cimg1938ni9.th.jpg (http://img512.imageshack.us/my.php?image=cimg1938ni9.jpg)
http://img512.imageshack.us/img512/8830/cimg1941jb4.th.jpg (http://img512.imageshack.us/my.php?image=cimg1941jb4.jpg)
http://img521.imageshack.us/img521/8720/cimg1942ey9.th.jpg (http://img521.imageshack.us/my.php?image=cimg1942ey9.jpg)
http://img259.imageshack.us/img259/5677/cimg1943pa0.th.jpg (http://img259.imageshack.us/my.php?image=cimg1943pa0.jpg)
http://img516.imageshack.us/img516/6774/cimg1944xw1.th.jpg (http://img516.imageshack.us/my.php?image=cimg1944xw1.jpg)


i put something together and installed the hardware
i use a core2duo e6420 OC @3,2 Ghz with 2 GB RAM on a new asus p5k deluxe
--> it's stable but i'm still testing ;)

http://img294.imageshack.us/img294/1434/cimg1946lc9.th.jpg (http://img294.imageshack.us/my.php?image=cimg1946lc9.jpg)
http://img259.imageshack.us/img259/9026/cimg1949lj0.th.jpg (http://img259.imageshack.us/my.php?image=cimg1949lj0.jpg)
http://img512.imageshack.us/img512/1421/cimg1950ho2.th.jpg (http://img512.imageshack.us/my.php?image=cimg1950ho2.jpg)
http://img511.imageshack.us/img511/730/cimg1951hp1.th.jpg (http://img511.imageshack.us/my.php?image=cimg1951hp1.jpg)
http://img178.imageshack.us/img178/1381/cimg1953oq4.th.jpg (http://img178.imageshack.us/my.php?image=cimg1953oq4.jpg)
http://img294.imageshack.us/img294/9726/cimg1955ob5.th.jpg (http://img294.imageshack.us/my.php?image=cimg1955ob5.jpg)
http://img294.imageshack.us/img294/9726/cimg1955ob5.th.jpg (http://img294.imageshack.us/my.php?image=cimg1955ob5.jpg)


SmgMX3VKkk8

final pic soooooooooooooon

[fir3b4ll]

hi there it's done

the ut3 casemod has finshed
and here are the final pics

in 640x320 or 1280x1024

the inside design changed a little bit, because the uv blau wouldn't stick, so i decided to make it black inside


http://img118.imageshack.us/img118/9905/cimg1995wu1.jpg (http://img524.imageshack.us/my.php?image=cimg1995sz9.jpg)
http://img528.imageshack.us/img528/7696/cimg1999ho9.jpg (http://img504.imageshack.us/my.php?image=cimg1999lq5.jpg)
http://img118.imageshack.us/img118/9468/cimg2001ul6.jpg (http://img526.imageshack.us/my.php?image=cimg2001jf5.jpg)

http://img463.imageshack.us/img463/9928/cimg2008kl6.jpg (http://img504.imageshack.us/my.php?image=cimg2008sj9.jpg)
http://img525.imageshack.us/img525/5617/cimg2010ha4.jpg (http://img528.imageshack.us/my.php?image=cimg2010fi1.jpg)
http://img525.imageshack.us/img525/9792/cimg2012im2.jpg (http://img505.imageshack.us/my.php?image=cimg2012hc1.jpg)
http://img118.imageshack.us/img118/9258/cimg2013cl6.jpg (http://img102.imageshack.us/my.php?image=cimg2013zh6.jpg)
http://img515.imageshack.us/img515/3733/cimg2014wh0.jpg (http://img514.imageshack.us/my.php?image=cimg2014nn8.jpg)
http://img509.imageshack.us/img509/6852/cimg2015yc4.jpg (http://img529.imageshack.us/my.php?image=cimg2015ta9.jpg)
http://img525.imageshack.us/img525/3668/cimg2017aw2.jpg (http://img162.imageshack.us/my.php?image=cimg2017di9.jpg)
http://img48.imageshack.us/img48/8710/cimg2018fu0.jpg (http://img364.imageshack.us/my.php?image=cimg2018yh9.jpg)
http://img505.imageshack.us/img505/2779/cimg2019di3.jpg (http://img524.imageshack.us/my.php?image=cimg2019yt3.jpg)
http://img296.imageshack.us/img296/209/cimg2020yd2.jpg (http://img106.imageshack.us/my.php?image=cimg2020ds5.jpg)
http://img505.imageshack.us/img505/1561/cimg2021hv3.jpg (http://img528.imageshack.us/my.php?image=cimg2021fv8.jpg)
http://img124.imageshack.us/img124/3493/cimg2022ge7.jpg (http://img49.imageshack.us/my.php?image=cimg2022mr8.jpg)
http://img339.imageshack.us/img339/3589/cimg2023ex0.jpg (http://img169.imageshack.us/my.php?image=cimg2023mf2.jpg)
http://img130.imageshack.us/img130/3382/cimg2025pr8.jpg (http://img505.imageshack.us/my.php?image=cimg2025bk2.jpg)
http://img528.imageshack.us/img528/3754/cimg2026kz9.jpg (http://img501.imageshack.us/my.php?image=cimg2026sg6.jpg)
http://img516.imageshack.us/img516/3883/cimg2027mo9.jpg (http://img265.imageshack.us/my.php?image=cimg2027sw6.jpg)
http://img470.imageshack.us/img470/1838/cimg2028mk5.jpg (http://img505.imageshack.us/my.php?image=cimg2028ji1.jpg)
http://img510.imageshack.us/img510/8559/cimg2029ka2.jpg (http://img102.imageshack.us/my.php?image=cimg2029tj5.jpg)
http://img470.imageshack.us/img470/1848/cimg2030zf5.jpg (http://img501.imageshack.us/my.php?image=cimg2030vg3.jpg)
http://img408.imageshack.us/img408/3201/cimg2031vp0.jpg (http://img102.imageshack.us/my.php?image=cimg2031ai2.jpg)
http://img339.imageshack.us/img339/8728/cimg2032sr6.jpg (http://img364.imageshack.us/my.php?image=cimg2032kb7.jpg)
http://img503.imageshack.us/img503/3134/cimg2033pf6.jpg (http://img503.imageshack.us/my.php?image=cimg2033pf6.jpg)

[fir3b4ll]

http://img511.imageshack.us/img511/9355/cimg2037js3.jpg (http://img505.imageshack.us/my.php?image=cimg2037cj6.jpg)
http://img505.imageshack.us/img505/77/cimg2038wz9.jpg (http://img502.imageshack.us/my.php?image=cimg2038hb8.jpg)
http://img515.imageshack.us/img515/1331/cimg2040uj9.jpg (http://img526.imageshack.us/my.php?image=cimg2040yv4.jpg)
http://img48.imageshack.us/img48/3526/cimg2042vj9.jpg (http://img460.imageshack.us/my.php?image=cimg2042wj8.jpg)
http://img515.imageshack.us/img515/6052/cimg2051ba4.jpg (http://img102.imageshack.us/my.php?image=cimg2051ju7.jpg)
http://img118.imageshack.us/img118/6459/cimg2052gt7.jpg (http://img526.imageshack.us/my.php?image=cimg2052wi2.jpg)
http://img76.imageshack.us/img76/2157/cimg2053py9.jpg (http://img503.imageshack.us/my.php?image=cimg2053jg9.jpg)
http://img501.imageshack.us/img501/1718/cimg2054dp7.jpg (http://img528.imageshack.us/my.php?image=cimg2054qh8.jpg)
http://img102.imageshack.us/img102/6743/cimg2055we9.jpg (http://img504.imageshack.us/my.php?image=cimg2055hd8.jpg)
http://img411.imageshack.us/img411/4425/cimg2056bo1.jpg (http://img524.imageshack.us/my.php?image=cimg2056no2.jpg)
http://img513.imageshack.us/img513/1264/cimg2057hk3.jpg (http://img504.imageshack.us/my.php?image=cimg2057fd4.jpg)
http://img111.imageshack.us/img111/7583/cimg2058gi4.jpg (http://img390.imageshack.us/my.php?image=cimg2058pt0.jpg)



CTNSTv5PxTQ


comments welcome ;)

--> stay tuned, i'm planning the next mod :)

[slytherock]

wow, that's deserve a lot of reps :up:

[xRyokenx]

That UT2k7 case is unreal it looks so awesome.

Yeah yeah, I rolled Corniness +52.

Kickass case though.

[jdbnsn]

Great job man! I copied a shortened version of this worklog to our gallery and I'll move this thread out of "works in progress" and into "your mods"

[fir3b4ll]

thx a lot ;)

i hope my worklog will be found here as well :rolleyes: