little help with water chillers

[sirkillalot617]

Ye im looking for something that is small and compact enough to fit inside an old server case. That will help cool my cpu down by a few more degrees iv found these guides but i cant really understand whats going on any help is appreciated

Sir k

http://guides.pcapex.com/water_cooling/efficient_water_chiller.php

http://guides.pcapex.com/special_projects/direct_die_cooling.php

[Redundant]

In the first link:
What he does is sticks the radiator on the outside of the case and then adds a water block which he attaches the cold side of a peltier and adds a HSF to the other (hot) side. This way he cools the water down with the peltier and has a HSF sticking out the back of the case in addition to the radiator.

EDIT: I think in the second one the guy made a waterblock with no bottom an he glued it to the CPU (hence the "Direct" part)

[sirkillalot617]

what i really want to know is the pelter inside his case or not in the first one

[Redundant]

It's on the outside. (http://guides.pcapex.com/water_cooling/image.php?url=ip-chiller20.jpg)

He actually cut a hole for the waterblock (http://guides.pcapex.com/water_cooling/image.php?url=ip-inside5.jpg) to fit into so the peltier is only about 1cm away from the back panel...

EDIT: I suggest you don't try that because the peltier HSF & Waterblock are not secured very well so it may pull the hoses off.

[sirkillalot617]

well im gona give it a try using copper pipe so how big is the pelter and where could i get one from also my case is massive

[sirkillalot617]

bump im still tryin to ifnd were they sell the chiller the guy used