Water Cooling Setup

[sirkillalot617]

What do you think of my water cooling setup. I was originaly going to make everything myself but I figured this way was cheaper and would offer better performance.

RADIATORS

4x140mm heatercore or Air conditioning radiator

And this dual 120 fan rad

http://www.watercoolingshop.com/catalog/product_info.php?cPath=27&products_id=467

CPU BLOCK

http://www.vadim.co.uk/Innovatek+G-Flow+CPU+Block+Socket+AM2

GPU BLOCK

http://www.watercoolingshop.com/catalog/product_info.php?cPath=26_50&products_id=422

NORTHBRIDGE BLOCK

http://www.vadim.co.uk/Swiftech+MCW30+universal+chipset+block

VRM BLOCK

http://www.thecoolingshop.com/product_info.php/cPath/33_195/products_id/1740

HARDDRIVE BLOCKS

http://www.thecoolingshop.com/product_info.php/cPath/33_65/products_id/2514

PUMPSx2

http://www.thecoolingshop.com/product_info.php/cPath/33_57/products_id/2290

RESERVOIR

Homemade and

http://www.thecoolingshop.com/product_info.php/cPath/33_61/products_id/2528

The Rest

4x140mm fans
http://www.thecoolingshop.com/product_info.php/cPath/98_1_16/products_id/2049

2x120mm fans
http://www.scan.co.uk/Products/ProductInfo.asp?WebProductID=373995

Tubing
http://www.vadim.co.uk/Tygon+3603+tubes+1-s_2-q_+ID+-oq_1ft-bq_

Fluid
http://www.vadim.co.uk/Innovatek+Protect+IP

What do you think if you can see any problems please tell me thanks.

Sir K

aka mark

[Silenced_Coyote]

How about the Laing D5 (http://www.thecoolingshop.com/product_info.php/products_id/2291) pump instead of the D4 you picked?

I would skip watercooling the hard drive for sure. Probably the VRMs too.

I think that 4x140 heatercore is enough. I doubt the extra 2x120 radiator would help much.

When looking for fans for radiators. You want to find ones that are rated for high static pressure because of the tightly packed fins. This is more important than CFM. I'm not sure if this is a good analogy but think of 2 cars. The sports car is the high CFM fan. A truck is the high static pressure fan. Now put a giant trailer/boat (radiator) on both. You would want the truck.

[sirkillalot617]

right thats the pumps changed

I chose the fans because they are quiet and I can get them cheap but what do you suggest I should get. The dual rad is for the graphics cards the heatercore is for the rest iv got my case cut for those so I aint changing it and that means I dont have to have fast spining noise fans.

[Silenced_Coyote]

You probably know this, but just in case. Here is a page out of a watercooling article about heater cores. It's got a few good bits of info.
http://www.techarp.com/showarticle.aspx?artno=376&pgno=4

How about this Panaflo fan?
http://www.sidewindercomputers.com/pa12ulqu.html

[sirkillalot617]

Ye I know bout Heatercores my cousins a van mechanic so I told me most I need to know

Iv already got some off those fans they shift a ton of air but there make alot of nosie in my opinion

Thanks Anyway so thiers no problem with the blocks Iv chosen

[Silenced_Coyote]

You could always slow those fans down.

The blocks you chose are fine.

EDIT:
Actually, I would recommend the Swiftech Apogee GT CPU block.

[sirkillalot617]

MMM ah well Thats the block I actualy wanted It was just labled wrong when I put the link to the site.