My cold case (warning.. LARGE pics)

[Nick_Black]

Edit: I finally got round to fixing the image sizes (sorry) :redface:

hey, after looking at all your cases I was thinking I should post mine,

I built this thing about 3-5 years ago (though I've upgraded it over the years)
I had pictures of it during the build... but I lost them so I hopw you enjoy what I've got

Here's a front view of my case, you can see the dark blue, (which was a creme colour, and the yellow was a yucky see thrue green. and as you can see I also installed handles (you can also seen my pc's been beet up a bit over the years...) (and sorry for the sideway's pic)

http://img147.imageshack.us/img147/3506/88912788zx8.jpg

here you can see the window I cut out (I didn't plan this... I just started kutting, and ended up liking the shape...) you might also beable to see the blue fading to black.

http://img413.imageshack.us/img413/38/67458174yc8.jpg

here you can see one of the lights (yellow), and the bad hook up job for the fan.... it's solderd, but I didn't have electrical tape or heat shrink at the time..

http://img248.imageshack.us/img248/3893/17266314zc0.jpg

here i acidently manged to take a picture of the red light flashing (I could't get the timing right to cach the light while the case side was on... when I wanted it to flash... and yes both light are flashing type... it was an accident at the purchase, but I ended up liking the flashing thing..)

http://img406.imageshack.us/img406/2251/27055375jx6.jpg

here you can see the light between flashes (ok, you can't rele see the light.. it's under the tape.. yes, more of my wonderful taping job.. :p )

http://img244.imageshack.us/img244/4132/37371730ct7.jpg

here you can see some of the terrible cabling mess.. I meen.. here you can see how I painted the insides white, and the lower half of the tray's black..

http://img150.imageshack.us/img150/5153/75374428oz4.jpg

another pic of the messy cableing...

http://img171.imageshack.us/img171/3455/16880189xm7.jpg

and a pic of my messy work station (usually I try keeping it tidy, but I was editing some recordings... so the mess piled up around me...)

http://img441.imageshack.us/img441/4578/13784104xp3.jpg

hope you enjoy'd it.. if you have any questions, don't hesitate to ask.

[Drew]

Man, them pics are mahooooooooooooooosive!

Kinda hard to see whats in 'em.

Really need to resize dude.

[Nick_Black]

I fixed the Image size (sorry for any burnt out graphics cards I might have coused :p ..... :redface:

[Drew]

Now that I can actually make it out....

Like the blue -

Don't like the wires -

Sort your wires out dude!

Welcome to TBCS ^.^

[Nick_Black]

(yay! I'm welcomed :D ) yeah I might organize the cables again.. but I'm gonna be working on a new prod. soon so I'm not gonna bother too much with this case (... cableing is gonna be a pain for this case.. 3 HDD's 2 CD drives, floppy, and the power cables are tape to diffrent parts of the case to suply power to the lights, and there's like 2 Y power splitters... (I never rele planned out this prod. and after years of upgrading, I kinda did what "fits" not nesasaraly in the best way..)

Thanks for the reply!! :D

[Luke122]

What kind of monitor speakers are those? I would really like a good set of monitors, but cant affod the $500-800+ for a good pair.

[Nick_Black]

the monitors are Yorkville's YSM2P's the cost round 500 for a pair (can) though I would advise going for the YSM1P's the will give you a bit more power and also cover the complete 20-20 frequency range.

[Omega]

I want speakers that cover the 20-44k range. That way I can give people headaches within a mile radius.

[mikesmodshop]

@ Omega:
You could take some amps and car speakers and turn on some loud music.
that might bother people (especially the older ones) within a mile radious.

@ Nick:
I like the speakers and background, but I really think you should straigthen out all your wires.