my march break LC prodj.

[Nick_Black]

ok, this is my first mod in a while, basicly, what I'm gonna do is, seal up the case, and fill it with water...TAP water.... or maby distilled if I feel like it.
this computer actually belongs to a friend of mine, I was suposto make it look cool...and yeah, we both kinda forgot about it, but I found it, and now I'm gonna play with it. :twisted:

this is what has already been done by me:
http://img260.imageshack.us/img260/1430/caseopen1id1.jpg
http://img366.imageshack.us/img366/3865/frontpanel1qg4.jpg
http://img369.imageshack.us/img369/2833/sidepanel01ch6.jpg

well I'm off to buy some silocone, and some new cutting disks, and a few other toy's.

(I'm not to worried about messing this thing up... it's ANCIENT! the pwr suply is 145W and dosn't even have a fan. and I forget what preocessor it's running, and I believe it's about a 6 Gig HDD..

[tybrenis]

Wait, I don't get it. Do you expect the computer to still run when you're though with it?! If so, you'll need to use a non conductive fluid, like an oil. Do a Google search for oil mod or something similar, there've been a lot of vegetable oil mods in the past.

[Nick_Black]

aye, that's what alot of prodjects use, oil, (yes I've read up on this) but, since it's such an old PC, but I'm thinking af maby putting some fish in there... i'm not too woried about heat, so I'm (basicly) going to slather the whole thing in silocone, with the heat sink sticking out, make water tight boxes around the HDD, cd drive, floppy drive and PSU, all the wireing is going to be put thrue tubing, and yeah, if all goe's well, nothing electrical should be touching water.

EDIT: oh, and I also have an Idea to generate a curent, without the use of a fan...

[DaveW]

Wait...what? You're not serious, are you? Silicone over your parts, leaving some exposed, fill it with water, then use it as a fishtank? That somewhat borderlines on cruelty.

-Dave

[Nick_Black]

:twisted: :twisted: :twisted: :twisted:

or maby

:dead: :dead: :dead: :dead:

we will see :p

edit: no, sorry, I'm not leaving ANYTHING exposed except for the fins of the CPU...

[Nick_Black]

yes, that was my concern too, but (I believe) it's 200Mhz processor, I'm not too worried, plus, If I keep the water cool, it should keep the silocone hard on the surface preventing leaks. (hopefully)

[LiTHiUM0XiD3]

***waits for sparx to fly and the smell of cooked fish to fill the air*** :P
all the power to ur idea dude
just....... test it out b4 u even think about puttin the fishies in lolz

[d_stilgar]

I had an idea to do a fishtank PC like this a while back. I hope you do it so I don't have to pend my time trying and possibly failing.

[Nick_Black]

just....... test it out b4 u even think about puttin the fishies in lolz

I dunno, my mom like's eating fried fish... :p

I got my parts, gona start building now, hopfully I'll get some more pics in before the end of today...

[Zephik]

Hey! I love fishsticks! Can I have some??

You know, what you could do is make the side panel or something like that into a fish tank. It doesn't even have to be very big. I have a gold fish in basically a suspended jar type thing. It's probably about 10 cups worth of water and he seems pretty happy. lol probably because every 10 seconds he thinks he is in a new place...

Pretty decent cuts by the way. :up:

[Drew]

Interesting idea... this is gonna be worth watching.

[Nick_Black]

ok, I was hoping for seethrue silocon... but oh well (oh, and I've decided, when I try to run it, I will have a video camara running... :D)

first I checked to see if the computer still works.... yep

then I checked to see if my silicone was cunductuve, which, thankfully it was not.

so, next step: see if there is a fuse in the Power supply:
http://img254.imageshack.us/img254/760/fusexc2.jpg
yes there is (oh yeah, there was a fan in it... sorry)

remove the CPU fan.. I won't need it anymore (hopfully)
http://img339.imageshack.us/img339/153/fanxw2.jpg
done

install a modem... who knows... I might wanna network this thing with some P1's I have lying around...
http://img475.imageshack.us/img475/2551/modemgp3.jpg
(oh my god, it take's one of those old black thingie's... I don't even know what there called anymore.

now. my mobo is ready for some silocone:
http://img410.imageshack.us/img410/1345/step1sj3.jpg
all innocent looking:twisted:

cover some of the vital holes:
http://img410.imageshack.us/img410/2189/step2jy4.jpg
I feel like I'm in kindergarten again...

a bit more
http://img238.imageshack.us/img238/3941/step3hg9.jpg
man this stuff is sticky...

a bit more still :D
http://img467.imageshack.us/img467/3631/step4pd2.jpg
Mmmm... looks like whipcream.. yum

now I'm waiting for it to dry before filling in more hole's

[ozzmossis66]

This is so nutty its cool.

Im pretty sure the long brown slots are ISA's or EISA's. old 486's used to have an addition in line with them which was a lighter brown color. Those were for the VesaLB's if my memory serves me correctly.


Shane

[Spawn-Inc]

well its to late now, but do you know if that silicone is safe for fish?!?!? you have to use fish friendly silicone. something like this...
http://www.amazon.com/Aquascape-Black-Fish-Silicone-Sealant/dp/B00069UDBG

but that is a very cool idea. plus the heat from the cpu can act like a water heater

+rep for trying this... and good luck finding all the leaks..

[Nick_Black]

thanks evryone so far! but I will have to wait till tommorow before working on it much more (it's a thick coat... so it'll take a while to be workable dry.)

and as for "fish safe silocon" crud.... oh well... maby I'll add a layer of fish safe stuff to it or something...

[armadilloben]

water in a computer hmmmmmmmmm......................



know what else is fun? playing baseball in the middle of a very large field with a rusty steel bat in a thunder storm lol

ps i will give u a ****load of +rep if this actually works

im sure you have alot of positive reinforcement about this whole idea but i do wish u the best of luck on such an endevour i would vote your case for mod of the year if this does work dont let me down man:D

ben

[Nick_Black]

OOooh bonus, I love reps.. and if not... well It'll be a nice fireworks show... :D

anyway this is what I've got done for today:

started cutting:
http://img293.imageshack.us/img293/2548/compcase001ms9.png

done the cuts (though there not the greatest....) :
http://img162.imageshack.us/img162/1420/compcase002qc3.png

file's a bit and cleened up a bit:
http://img162.imageshack.us/img162/6906/compcase003zr6.png

this is not the best job I've done... but It'll do for this prodject (I'm not gonna put too much effort or money into this, untill I'm shure it'll work...)

that's going to be it for today!

goodnight!

[Crimson Sky]

This is not gonna boot ;)

[Nick_Black]

This is not gonna boot ;)

logicly... it shouldn't... but if you have ever watched junkyard wars... they've made some stuff work that SHOULDN't possibly work...

(btw, I'm honoured to have Crimson_Sky look at my work :up: )

[BerticusPryme]

man of all the crazy things I have seen this by far is one of them. I wish you the best of luck on this project. If this works it's so gonna rock...:banana:

[Zephik]

Lmao, my god... this is the best mod ever. I haven't laughed that hard in a while, when I saw all that silicone... I just busted out laughing.

Now I'm curious as hell, I can't wait to see if it boots or not.

Good luck and thanks for the laugh!

[chaksq]

I give you props for something different! Can't wait to see if it will actually work. I like mods using junk components, people take more risks as they don't care if they break them.

[Drew]

Absolutely brilliant.


You


Are


Totally


Mental.


Have some bananas... you deserve them for putting up with the voices...

:banana: :banana: :banana: :banana: :banana:

(the only way I can express my chucklyness at this mod)

:edit: You have remembered to silicone the backside too, haven't you? And interjection from my wife: 'What you gonna do if you need to fix it? You'll never get all that silicone off...

:edit 2: For clarification, it's against the rules for animated .gifs in sigs, but OK in posts?

[rendermandan]

Interesting Idea you have there. Have you considered the weight of the water that you will be adding. Hope you don't ever want to move the case as you will need some hefty handles on the top! Also, how are you going to seal the case door shut?

[Nick_Black]

BerticusPryme:
Thanks :D I'll take that as a complement :D:D

SnowFire
making people laugh make's it all worthwile :)

chaksq
egg sackly I would never have done this with a new boeard :D:D

Drew
first I was crazy..now I'm mental... AWSOME!!! (yay! I love bannana's :D)
and I won't need silocon on the back becouse I'm gonna seal it up around my mobo so no water will get to the back. and as for your wife: she's perfectly correct. in fact I made a booboo, the conector for the power button... I forgot to plug in... oh well, I'll just soder it on via the back...

and I think there afraid of people having verry intense animations in thier sigs..

rendermandan
this slow of a computer? nah, I don't see why I would ever need to move it...



Picture's of progress should be up soon!

[Nick_Black]

ok, I'm not as far as I thought I would be... (I cant find any ruddy solder...)

but anyway, I know the side's are going to be closed, so I had to open the top:
http://img113.imageshack.us/img113/1417/image1od0.jpg
http://img113.imageshack.us/img113/4403/image2tiffgz3.jpg
http://img113.imageshack.us/img113/341/image3tiffns4.jpg
it is not too neet, but I'll probably throw some fiberglass around the edges...

and becouse I messed up on the power button, I'm gonna have to soder it via the bottem... and to make it look cool (and hopfully a bit more water tight) I'm feeding it thrue a tube.
http://img341.imageshack.us/img341/1856/image4tiffkw6.jpg

and I was origianally planning to cover evrything in my case (including the case itself) with fiberglass (well... more specifacly fiber paper... but none the less)
it turns out I was too poor to buy the epoxy. but I found this stuff for dirt cheep:
http://img131.imageshack.us/img131/212/image5tiffbk2.jpg
I tried it on some cardboard, and it seems to do the trick.

so now it looks like my case will be paved with asphalt :D
(this stuff is sparkally too :D:D:D )

[Spawn-Inc]

how do you plan on covering up the back of the mobo?! and then once its covered how to you plan on attaching the mobo to the tray? i'm trying to pull for ya but i forsee ALOT of problems.

[Nick_Black]

the thing is... I'm NOT covering up the back of th mobo...

what I'm planning to do is this:

This is the side (cutaway) view of the original mobo and the case.
http://img479.imageshack.us/img479/9153/side1iq9.gif

and this is where I am now (mobo is coverd in silocone)
http://img337.imageshack.us/img337/7263/side2eu0.gif

then I fill the gap between the mobo and the case:
http://img259.imageshack.us/img259/8013/side3ln7.gif

then EVRYTHING gets a layer of asphalt (I don't want the case too rust..)
http://img259.imageshack.us/img259/908/side4zl8.gif

and than, simply fill it with water:
http://img115.imageshack.us/img115/5055/side5th8.gif

and VOILA!

now I'll leave you guy's (and girls) in awe at my AMAXING (yes.. with an X) fireworks skills!

[XFOX]

that is CRAZY but it will be a really cool mode "updated please":up: :D

[chaksq]

Can't wait to see if you can pull it off.

[tybrenis]

Keep in mind that silicon like that takes about 2 weeks to set up. While it might be cool to the touch at first, you might end up with a mess of goo if you fill her up too soon.

EDIT: I found you this article:
http://forums2.gardenweb.com/forums/load/hypertufa/msg1217385422593.html

The problem you might have is that silicon will form a skin on the top and bottom and those will cure while the middle is still gooey and uncured. As soon as you break that skin and get water inside the goopy part, you're going to have a mess. This guy recomends using a bit of actrylic paint and glycerin to add moisture to the mixture to allow to to cure within a day or so. Otherwise it might never cure in layers over 1/4" thick.

[Nick_Black]

!^%#@%!@!$%!@ I could have used that info yesterday... I was wondering why it was taking so long 2 dry... the bottle never said how long it would take to dry.... crud oh well

XFOX: here's your update.

chaksq: I hope I CAN pull it off....

ok... update time.

since I couldn't find any solder I had to scrape some off an old project of mine (a simple 1.5W tube amp thingy I made 3 years ago or so...)
http://img474.imageshack.us/img474/8675/soderqx7.jpg

i used some hot glue too keep it in place:
http://img155.imageshack.us/img155/5240/hotglueit7.jpg

I put the mobo in the case and added more silocone
http://img139.imageshack.us/img139/3502/moresiloconwb3.jpg

and I'm starting to hate working this stuff.. it's sticking to evrything..
http://img367.imageshack.us/img367/8747/stickyfz2.jpg

and to prove I've TOTALLY lost my mind, cardboard and ductape, yup can't have a good mod without ductape :D
http://img143.imageshack.us/img143/7936/ducttapeda7.jpg

that's it for today, stay tuned for another update tommorow (hopfully)

Edit: oh yeah... as you can probably tell neetness is not egsactly my primary concern...

[tybrenis]

Wow. That will never dry, lol. Maybe some heat will help it along. Well, I know heat will help it along. But you might need a lot, I don't know how much exposure it will take. Perhaps a heat gun is your best bet.

[squilliam]

Overclock it! :D
Good luck man!

[Nick_Black]

Overclock it! :D
Good luck man!

I was plannig to, but this is an old board... I would need to change some jumpers... which I can't anymore, but maby I'll run it a bit without water in it, than light a fire in it, before I put water in it (no, suprisingly I'm not gonna light it on fire, I was bieng sarcastic there)

but hopfully the asphalt will give it a good enough shell....

well, cya tommorow!

[Nick_Black]

Oops, I lied, i do have another update 4 you

IT'S ALIVE!!!! I just quickly hooked it up and IT BOOT'S! (oh yeah, it's a faster comp than I thought, it's a 333Mhz...)
anyway I booted all the way to windows! (than I turned it off...)

but I'm suprised it's made it this far...

oh yeah, I forgot to mention, It won't have a floppydrive becouse i forgot to install it when I was putting in the silocone... oh well less wire's to worry about.

[squilliam]

What about CD? How will you format? How do you eat your fish sticks? Oh the wonders of the world...:rolleyes:

[simon275]

IT BOOTS :eek:

Wow!

Um ok.

Question wont the north bridge overheat and fizzle out as it is covered in silicon and has no airflow.

So are you gonna have the water circulating through a radiator or just a big tank of water with a PC in it?

By the way the cardboard is gonna go soggy.

+rep as this rocks.

[Drew]

Hahaahahahahaaaaa...

Hehehehehehehheeheee....

Mwahahahhaaaaaaaa......

Silicone, duct tape, cardboard....just keeps getting better. Need some cable ties though, it'll never work without some cable ties.

Absolute mental crazy genius - in the same league as Defyant and Crison IMO - but for completely different reasons.

Fair play for sticking to your guns when loads of people said it'd never work.

And if the northbridge does go 'fzzzzzzzzzt....' you'll know what to do with fish tank mod part 2 wont you.

More bananas because you crack me up.

:banana: :banana: :banana: :banana: :banana: :banana: :banana:

[Nick_Black]

By the way the cardboard is gonna go soggy.



do'n worry, I've got a few moew tricks up my sleeve;) , thought i might end up cheating a bit (well, cheeting in my eye's at leat)

should get some more pics in this afternoon. (or earler, depending on woh things go.

oh, and Drew, I'll see if I can work in some cable ties :D

and thanks for the bannana's!!!

lol

[Nick_Black]

ok, a small imbetween update:

I got the rest of the cardboard put in:
http://img237.imageshack.us/img237/2378/image1tiffch3.jpg

jusk a quick sneek peview of how it;ll look with the door closed:
http://img259.imageshack.us/img259/9804/image2tifffj4.jpg

What's this!?? a measuring tape?? that almost seems reasonable!
http://img375.imageshack.us/img375/6898/image3tiffwa0.jpg

what? plactic? like a pool lining? thats almost LOGICAL!
http://img172.imageshack.us/img172/5883/image4tiffyl4.jpg

yes, I'm planning to make a lining for this (becouse I ran out of silocone, and didn't wan't to wait 2+ weeks for it too dry...)

but don't worry, I'll leave the CPU and the southbridge exposed. :D
I haven't gone completly sane...

[LiTHiUM0XiD3]

altho i admire ur ideas.... i cant see this going very far... have a fire extinguisher near by when u fire it up .... and a hope ur feet aint wet either.... could get very painful...... ur insanity inspires me...... im gunna design a duct tape water cooling system...... when i pull my laptop outa the freezer (long story) :P

[mellojoe]

Agreed.

I think this is a great idea.... but just don't be too dissappointed if it goes boom. Your insanity is a bit contagious though. :D

[chaksq]

My only concern with the pool liner plastic stuff is that is will melt on the heatsink. Continued good luck.

[Drew]

:( I liked it without the plastic bag :(

And there's still no cable ties ;)

[Nick_Black]

quote of the day (from the magic school bus): "take chances, make mistakes and get messy!"

CHIMAERA: I'll be looking forward to seeing that :D (and I would love to hear how your laptop got in the fridge... :D:D) and no worries, I'll have a fire extinguisher ready. :P

mellojoe: me? insane? no way...

chaksq: I'm too cheep to use real lining, so this is just a plastic bag from some water-softener salt.

Drew: I agree, plus I feel like I'm cheeting using it, but since I ran out of silocoe, this is the best I could come up with...

I'm trying my best to find a place for them (well, it already has some on the power cables... but I'm planning to use some twist ties, couse I can't find any cable ties)

this thing (hopfully) should be ready to hold water tommorow, or the day after.. though don't hold me to that.

[Nick_Black]

ok, another mini update... I GOT DUCTTAPE HAPPY!! :D:D:D:D:D:p

I ried bieng neet and cut out neet pieces of plastic, and glueing them neetly... than I said "F@#$ it" and pulled out the duct tape:
http://img158.imageshack.us/img158/8746/image1tiffqj6.jpg

and a bit more..
http://img338.imageshack.us/img338/3083/image2tiffdh5.jpg

and to see if it still runs (I switched the cable's from the computer beside it.)
http://img68.imageshack.us/img68/3281/image3tiffzl7.jpg

hope you enjoy it so far (and as a precoution... if you have a bomb shelter, you might wanna kip in there tommorow night...)

[Maz]

are you running it without that fan?
IYA i wouldn't worry about heat

and btw, the Heatsink must get hot past the point of boiling water in order to melt the bag...

[Luke122]

Haha.. leave it to a musician to come up with something like this. Hahahaha
:D :D

[Nick_Black]

Maz: I'm not worried about heet :D thanks for the reply!

Lukifer122: glad to see your still alive man! (I'm waitning on pics to see how you managed to cram that ninja in there...) and of course a musician would do this, "we gotta broaden people's mind man!" lol :p

and a special thanks to Drew who made me this AWSOME sig!
I think I might just write you a song :p

(btw, if anyone knows the coding to make a pic a href (link), please tell me...)

I love these guy's:
:bunny: :bunny: :bunny: :bunny: :bunny: :bunny:

[Nick_Black]

he he, I wrote a quick song (this one's 4 you drew (and anyone else who wan'ts to heer it, becouse I find it convay's a good message)
the song's called Drew (http://www.soundclick.com/bands/pagemusic.cfm?bandID=637533) (apropiatly enough..)
oh, and I know I suck at singing, and the instroment are done sloppily, cinda (hopfully) give it more of a "crazy" theme to it... hope you enjoy :D )

I'll have more pics up tommorow.

Edit: god @%$@ the hi-fi is messed up agin.. oh well, the low-fi works fine.

[LiTHiUM0XiD3]

lolz well i had to give the POS emachine a shake down.... reformat and all.... and seeing as i cant run the damn thing without overheating unless i severly underclock it.... (amd 2400+ 1.8Ghz down to 533Mhz) and i couldnt adjust the system clock outside of windows..... i had to stick it in the freezer to do so lolz....
god shall damn emachine....
but meh... laptop was free ($1100USD value) so im not rly complainin lolz....... im thinkin of some way to route water thro the stock lappy heatsink to cool it... so crazy.... it just might work... :P :D

[DaJe]

Maybe you should make it so things like an air pump and such can be controlled from the computer.

[LiTHiUM0XiD3]

not hijacking th thread but.... air aint got nuff heat removal ability for this... unless rly frigid air....

[DaJe]

Are you directing that towards me? If so, I mean a pump to pump bubbles for the fish.

[Drew]

awwwwwwww...

He wrote me a song.

I think he must love me :D

Can't listen to it 'cos apparently linux is anti mp3..... but Iiiiiii'm sooooo flattered :D

[Nick_Black]

CHIMAERA: that's odd that it overheats so fast? sounds to me like the thermal paste is not put on right (happend to me once..) and hehe:D I've done a similar thing once, just used an old heetsink and made it into a watercooling block... I'll be watching you, I'm curios how your planning to pull it off :D:D

DaJe: first I'm going to see if this thing will run before I put in any fish :D

Drew: I LOVE YOU MAN!! lmao! :p thats odd though that linux won't run mp3's.. when I had SUSE it ran them just fine... hmmm, maby I'll send you a Wav file or so... if you want.



anyway: Mini update time:

I got more ductape happy:
http://img402.imageshack.us/img402/1803/image1tiffrz5.jpg
evrything has about 3 layers of ducttape :D:D (give or take a few layers)
though I decided not to cover captain crunch, he's soo cool! 8) and who know's, maby the'll sponser me next time :D

ohwell, so much for showing captain crunch's face...
here's the first layer of asphalt
http://img142.imageshack.us/img142/2000/image2tiffzy0.jpg

I know, it take's away from the coolness of the ducttape... but oh well...

[Luke122]

Drew: Install VLC Player to listen to MP3's. It's in the Ubuntu add/remove. :)

Nick: Sorry for the delay on the pics, work is crazy, and I'm not sleeping much atm. I'll grab pics at lunch today.. 2.5 hrs to go!

Chimaera: Is it an E-Machines laptop by any chance? I had one do the same thing.. constant overheat. The problem is that the heatsink sucks, and the fins are so tight, that ANY amount of dust will block. The answer is to remove the keyboard, then the cpu fan, and blow it out from the inside.

Maybe Nick and I should do I TBCS theme song? :D

[Nick_Black]

(I'm waiting for the second coat to dry now, and I found another little booboo I made... but nothing a bit of epoxy can't fix..)

MintyMadness: I think I missed your most about the PSU you made a while back, I wasn't too concernd about it at first... but now I'm thinking of doing something about it.. Thanks!

Lukifer122: actually, that dosn't sound like a bad Idea... PM me your e-mail and we'll talk (wheather the admin's like it or not...)

and no worries about the pics, I don't blame you for wanting to get some sleep.

[Reyer]

you are a nut job, but i like it

[Drew]

Cheers lukifer, I'll look into it.

:edit:

Lukifer +rep VLC works.

Nick +rep for being a bit **** hot with a guitar.

[Nick_Black]

Reyer: you like nut-jobs to? :D

Drew: glad to hear you liked my guitar :D thanks :bunny:

but, unfortunatly, I have no picture's for today, all i did was filling some hole's (which isn't to interesting for pics, cuz it's barely noticible)
I disn't rele have much time for anything else today (I had a denticed appointment and had to get 2 hole's filled... yipy:neutral: )
and yeah... hopfully I'll get some update's tommorow :D


edit: oh, btw drew, I love your new sig :D

[chaksq]

Maybe Nick and I should do I TBCS theme song? :D

That would be awsome. Also good to see some progress being made.

[LiTHiUM0XiD3]

its not the thermal paste..... i replaced the orig crap with AS+5...... and its seated properly...... its just pathetic design..... simpley said.... emachine..... search google for reports on the emachine m5312 .... u shall see... hinge issues.... heat issues.... ram issues.... HD hook up issues... u name it... its a peice of ****.....

[Luke122]

Yup.. sounds familiar.

http://i128.photobucket.com/albums/p176/lukifer122/deadlaptop2.jpg
http://i128.photobucket.com/albums/p176/lukifer122/m5312heatsink.jpg
http://i128.photobucket.com/albums/p176/lukifer122/deadlaptop1.jpg

Yup.. except mine was given to me by the previous owner AFTER the damage was already done. As I mentioned.. if you take it apart and blow out the heatsink from inside, it apparently helps (according to numerous resources online that hate this thing). :D

[Drew]

(I had a denticed appointment and had to get 2 hole's filled... yipy :neutral: )


Just got back from dentists... 3 shots of Lidocaine and 2 manky molars dug out = fuzzy face and a stitch in my gum. not a good day.



edit: oh, btw drew, I love your new sig :D

Which one? I've been through a few this week.... can't make up my mind...

[Nick_Black]

Whoa.. I've been dead for a while. and look, it's down to the 3rd page already.

Question, should I finish this prodjest? (I havent worked on it since my last post)

[tybrenis]

I want to see this thing finished, as ridiculous as it is. I think everyone is waiting for the outcome.

What are you waiting for? Get to it!

=D

[Bucko]

Whether it works or not I need a laugh and want to see this PC full of water!

[Nick_Black]

yeah so do I.. damn, my brother has my camara. so no updates till tomorow or monday. srry :neutral:

[Eclecticos]

A+ For Effort. For Sure. Is this what you trying to do? Found it on another site.
Its not Water! Its a Dielectric Fluid called Midel 7131

[Omega]

Your duct-tape covered interior made me literally say "What the ****?!"

Keep it up, man. I can't wait to see more of this.

[Drew]

Update!

Update!

Update!

[Bucko]

Update!

Update!

Update!

What's that boy? Are you trying to tell us something? Is Timmy stuck down the well?

[Drew]

NOOOOOO!

Little Annie is trapped in a mineshaft... she needs help.

Send help now!

Don't you speak the lingo?

Gawd.

[XcOM]

A+ For Effort. For Sure. Is this what you trying to do? Found it on another site.
Its not Water! Its a Dielectric Fluid called Midel 7131

http://img393.imageshack.us/img393/5160/side5x4wx5.jpg

where did you find that?

[Eclecticos]

Get your Google on HomeBoy! Type: Submersed PC . . see Images

Curious To see where your going with this MOD Nick!
What ya doin' with the laptop?

[smoking_pig]

You sir are insane.

Then again alot of the geniuses of the world were :P

[azminisk8r]

dude you completely and totally stole my idea, but i was going to seal it all up with ducttape then use a layer of silicone and make the whole window plexi

you know if my school will"donate" a couple of their old computers ill do this, but ill probably use expanding foam, less expensive, less sticky, but still have to apply in layers. then cover in caulk

[PiGMaN]

I would love to be a fly on the wall when the fishies go BOOMMMMMMMM...

[dfigravity]

+rep for the sheer balls it takes to even think of a crazy idea like this...you rock.

[Nick_Black]

Lmao, 3rd page again, oh well I HAVE PICTURES!! yes A REAL UPDATE :D:D:D

first I filled up some of the last hole's:
http://img266.imageshack.us/img266/6172/gluecardboardrh6.png

some of the tape was somming off.. oh well, I should have enough layer's to be safe...
http://img253.imageshack.us/img253/6231/gluecommingoffho7.png

A picture of the laxan I'm using for the window:
http://img412.imageshack.us/img412/9029/looselexanwo8.png

Glue'd:
http://img412.imageshack.us/img412/4926/glueslexanwn1.png

books stacked to keep pressure:
http://img341.imageshack.us/img341/9294/booksre3.png

and this is a little side prodject for a friend..I might start a new thread for it.. or I might not...
http://img263.imageshack.us/img263/7418/sideprodjectij3.png

lol, and I'll try to finish it till the end this time :D:D:D

:banana: :banana: :banana:

[chaksq]

I still can't wait to see how this turns out. Interesting other project you have going on there. Would like to see where that is going.

[Drum Thumper]

How the hell did I miss this?

Man, you better be filming when you fire that baby up. I wanna see the explosion lol.

Craziest damn thing I've seen in a looooong time. And it boots up as well!

[ghoul]

well a great idea o hope it works out im tihnking it might.

i saw this mod once where they took out all the computer compontines in a pelxi case and filled it with vegtable cooking oil then put the mobo graphics, etc back in and it worked, was quite cooler to, id just hate that case if you wouldnt to take it to a lan lol all the oil spills everywhere

[LiQuid-V2]

Holy **** this is the most insane mod I have ever heard or seen about. Haha props to you man this is absolutely crazy.