New Comp=New Case. Need input?

[Mister Bojangles]

I'm gradually acquiring parts for a new computer. Since this is going to be a powerhouse of a computer (Intel QUAD core Q6700 and two 8800GTX's) I was thinking of doing a "sleeper," mod. A relatively simple mod that gives no hint as to what's inside, and then the computer grabs you by the genitalia. I haven't really committed to anything, or fleshed out any ideas, so I'm open to input, but here's what I was thinking: Possibly a matte gray or black, and no window in the case, I know *gasp*. LED fans, and possibly lights of some sort in the front bezel of the case to give it a subtle glow. Either that, or something incredibly high-gloss, to give it that "sleek" look. Again, like I've said, I haven't really finalized anything, so any input would be appreciated.

[Hightechman89]

Those parts are very good, but your heat output is probably gonna be high as ever. So you should probably consider putting in a waterblock inside to help cool down the parts, along with the led fans in the back end. As for the paint, I would definitely go with a gloss, maybe flame red gloss paint. Get back to me if you want email me and i can draw you up something...

[Mister Bojangles]

Yeah. Heat is something to consider. I was thinking a decently large fan in the side instead of a window, to maybe suck the hot air out. I'd prefer not to watercool the system, because I'm going to be moving it around a lot(LAN's) and because it's expensive.

[Hightechman89]

LMAO, Yeah, thats a good idea, very spy type stuff. But definitely make sure you keep that system cool. Did you buy a closed case? Or are you still in that process ???

[Redundant]

If you are going to have a window, I suggest having a somewhat tinted one and, when you turn on the internal lights, you'll be able to see what's inside. Uh, Intel Inside. ;)

If you want it sleek, don't put a fan on the side as that kind of ruins the look. You could put a blowhole on top maybe and use 120mm fans for the front and back.

[Ichbin]

do what squilliam is doing and put it in a mac case (ooo burn)

[Mister Bojangles]

If you want it sleek, don't put a fan on the side as that kind of ruins the look. You could put a blowhole on top maybe and use 120mm fans for the front and back.
Yeah. Good point. A blowhole on top would look much better. Does anyone have a recommended case for this? Obviously something with good airflow.

[Crimson Sky]

If you can afford the paper, drop some cash on a good ($150 +) Lian Li. They are very good regarding design and cooling. Respected too in the modding/DIY community.

[Zephik]

If you can afford the paper, drop some cash on a good ($150 +) Lian Li. They are very good regarding design and cooling. Respected too in the modding/DIY community.

Yea, just check out Alumaxx (http://www.acryan.com/gallery/alumaxx2006/index.shtml)! Definitely one of my favorite lian li mods out there. Franklin, u da bomb.

[Mister Bojangles]

Lian Li's are great. My current PC is in a Lian Li(unmodded unfortunately). I may go with this (http://www.lian-li.com/product/product06.php?pr_index=14&cl_index=1&sc_index=1&ss_index=4&type=b) case. Simple, but a "blank canvas" with which to mod. I appreciate all the input from everyone as well. It's nice to hear some second opinions.

[Zephik]

Lian Li's are great. My current PC is in a Lian Li(unmodded unfortunately). I may go with this (http://www.lian-li.com/product/product06.php?pr_index=14&cl_index=1&sc_index=1&ss_index=4&type=b) case. Simple, but a "blank canvas" with which to mod. I appreciate all the input from everyone as well. It's nice to hear some second opinions.

I like that one. It's cheap, its Lian Li, its all aluminum, and it has a very nice and simple design.

It's pretty cheap on Newegg.com too. Lian Li G50B (http://www.newegg.com/Product/Product.aspx?Item=N82E16811112104)