Project: Silver Dragon

[ulysses.cazuquel]

As it had promised I am in return with a new project using as main subject known dragons beyond the painting of 3 effects that will be used

Here this picture of the architecture of the cabinet that I will use where his main quality this in the laterals ones that are totally flat contributing to me not to have any problem to do my cuts

http://img63.imageshack.us/img63/4797/44562116ji1.th.jpg (http://img63.imageshack.us/my.php?image=44562116ji1.jpg)

http://img79.imageshack.us/img79/1300/76278749xz7.th.jpg (http://img79.imageshack.us/my.php?image=76278749xz7.jpg)

http://img127.imageshack.us/img127/8976/83294781gq5.th.jpg (http://img127.imageshack.us/my.php?image=83294781gq5.jpg)

http://img48.imageshack.us/img48/7113/32568546au7.th.jpg (http://img48.imageshack.us/my.php?image=32568546au7.jpg)

http://img48.imageshack.us/img48/4184/10014410wo6.th.jpg (http://img48.imageshack.us/my.php?image=10014410wo6.jpg)

http://img86.imageshack.us/img86/2609/66151755cx4.th.jpg (http://img86.imageshack.us/my.php?image=66151755cx4.jpg)

http://img86.imageshack.us/img86/1554/70566412xr3.th.jpg (http://img86.imageshack.us/my.php?image=70566412xr3.jpg)

http://img133.imageshack.us/img133/3760/47312333fx0.th.jpg (http://img133.imageshack.us/my.php?image=47312333fx0.jpg)

Here this the image of my first cut already printed of the two dragons that I will start cuts it in the next
week

http://img104.imageshack.us/img104/7849/37408755vc7.jpg



http://img442.imageshack.us/img442/7319/minhaassinaturaulysm4.jpg

[Ticien]

nice pattern! Those look like very complicated cuts. What is your technique?

[chaksq]

Good patterns. Should look great once cut. I like the clean lines of the case you are starting with.

[ulysses.cazuquel]

Today it was the day of leaving the lateral ready for the cut tomorrow
I began sanding all lateral ties to be in the metal
Then I made the demarcation to put the drawing of the dragon so that each dragon was perfectly in the same height was very difficult, but obtained success!!
Now it just lacks to remake some lines and to start the cut tomorrow


http://img230.imageshack.us/img230/8680/84721428fy9.th.jpg (http://img230.imageshack.us/my.php?image=84721428fy9.jpg)

http://img128.imageshack.us/img128/9669/97825798vk8.th.jpg (http://img128.imageshack.us/my.php?image=97825798vk8.jpg)

http://img160.imageshack.us/img160/4650/82626286uj4.th.jpg (http://img160.imageshack.us/my.php?image=82626286uj4.jpg)

http://img160.imageshack.us/img160/8703/58112056tv7.th.jpg (http://img160.imageshack.us/my.php?image=58112056tv7.jpg)

http://img502.imageshack.us/img502/5263/30783393tb1.th.jpg (http://img502.imageshack.us/my.php?image=30783393tb1.jpg)

http://img122.imageshack.us/img122/1002/60381530we8.th.jpg (http://img122.imageshack.us/my.php?image=60381530we8.jpg)

[ulysses.cazuquel]

http://img235.imageshack.us/img235/4795/26684430yy9.jpg

[moOmL]

The cuts look really nice and clean! Nice job!!

Are you using a dremel?

[ulysses.cazuquel]

The cuts look really nice and clean! Nice job!!
Are you using a dremel?

making the cuts using dremel and the record of cut 409 of dremel
Thanks

[ulysses.cazuquel]

I finished the cuts today them dragons and with them they had been more than 90 cut record

http://img339.imageshack.us/img339/8417/7silverdragonwy0.jpg

bigger resolution
http://img265.imageshack.us/img265/6977/7silverdragonwd3.th.jpg (http://img265.imageshack.us/my.php?image=7silverdragonwd3.jpg)

[simon275]

Its as if the dremel was part of your body. Great work man those would have to be the most intricate cuts I have seen yet.

+rep

[ulysses.cazuquel]

image effect cut dragon's

http://img255.imageshack.us/img255/1017/1efeitoassinaturaef6.th.jpg (http://img255.imageshack.us/my.php?image=1efeitoassinaturaef6.jpg)

[ulysses.cazuquel]

here an image you to see before and later and seeing the care that I had with the details

http://img412.imageshack.us/img412/5605/errosilverdragonys8.th.jpg (http://img412.imageshack.us/my.php?image=errosilverdragonys8.jpg)

[ulysses.cazuquel]

I today painted the dragons of the black color to protect the cut and also as base for the effect paint that I go to use

http://img456.imageshack.us/img456/9171/corgabinete1rc1.jpg

http://img473.imageshack.us/img473/56/2bll6.th.jpg (http://img473.imageshack.us/my.php?image=2bll6.jpg)

http://img452.imageshack.us/img452/3456/8bdy5.th.jpg (http://img452.imageshack.us/my.php?image=8bdy5.jpg)

http://img452.imageshack.us/img452/7100/7bmw0.th.jpg (http://img452.imageshack.us/my.php?image=7bmw0.jpg)

Here the cut of the name of the project that I made today only lacking to improve a little the cut and later to conclude with a finish that I will do tomorrow

The cut letters have maximum dimensions of 3cm of height for 2,5cm of width and they will be put in the part from above of the dragons

And goes to have a effect using as acrylic base and blue illumination

http://img82.imageshack.us/img82/9526/1lkr0.th.jpg (http://img82.imageshack.us/my.php?image=1lkr0.jpg)

http://img48.imageshack.us/img48/3008/2lff3.th.jpg (http://img48.imageshack.us/my.php?image=2lff3.jpg)

http://img442.imageshack.us/img442/8674/3luj4.th.jpg (http://img442.imageshack.us/my.php?image=3luj4.jpg)

http://img266.imageshack.us/img266/1657/4loo0.th.jpg (http://img266.imageshack.us/my.php?image=4loo0.jpg)



letter with the concluded cuts and with finish

http://img128.imageshack.us/img128/4189/5bll1.th.jpg (http://img128.imageshack.us/my.php?image=5bll1.jpg)

[ulysses.cazuquel]

http://img128.imageshack.us/img128/759/acrilicosj3.th.jpg (http://img128.imageshack.us/my.php?image=acrilicosj3.jpg)

http://img148.imageshack.us/img148/1572/primeiroqb4.jpg

http://img261.imageshack.us/img261/4374/segundolm4.jpg

http://img153.imageshack.us/img153/125/terceirovt6.jpg

http://img166.imageshack.us/img166/2276/quartouy7.jpg

http://img166.imageshack.us/img166/3227/quintoaf9.jpg

[mercerman318]

Thats incredible. I love the windows and fangrill. +rep

[OvRiDe]

Wow.. this is coming along very nicely..

Keep up the great work!

[jdbnsn]

That fan grill is an especially nice touch.

[ulysses.cazuquel]

That fan grill is an especially nice touch.

In my project I want beautiful cuts, beautiful painting and a great illumination and I also want works with acrylic
In two or three days I finish these parts and posting photos
Expansion Slot inserts of Acrylic

http://img266.imageshack.us/img266/6803/umdn4.th.jpg (http://img266.imageshack.us/my.php?image=umdn4.jpg)

http://img481.imageshack.us/img481/4195/doisfx5.th.jpg (http://img481.imageshack.us/my.php?image=doisfx5.jpg)

http://img481.imageshack.us/img481/5254/tressj1.th.jpg (http://img481.imageshack.us/my.php?image=tressj1.jpg)

http://img266.imageshack.us/img266/4512/quatrouk4.th.jpg (http://img266.imageshack.us/my.php?image=quatrouk4.jpg)

[Visionary]

That's amazing!!! I didn't know a dremel could do that. Great work. +rep

[ulysses.cazuquel]

That's amazing!!! I didn't know a dremel could do that. Great work. +rep

Initially this sticker will be placed in each acrylic but it appeared me an idea of using those stickers and another thing.

Later I reveal what will be

http://img259.imageshack.us/img259/9008/23735989ur4.th.jpg (http://img259.imageshack.us/my.php?image=23735989ur4.jpg)

http://img399.imageshack.us/img399/5313/58135173ll0.jpg

http://img523.imageshack.us/img523/8858/26122606za0.jpg

http://img339.imageshack.us/img339/496/10939265ix2.th.jpg (http://img339.imageshack.us/my.php?image=10939265ix2.jpg)

[alphastryk]

very good work!

+rep

[ulysses.cazuquel]

I bought 33 of the stainless steel screws of 3mm and more 15 stainless steel screws of 5mm to be used in the Coolers
But the screw of 5mm was great then will have that to change for of 4mm

http://img526.imageshack.us/img526/5941/parafuso2um8.th.jpg (http://img526.imageshack.us/my.php?image=parafuso2um8.jpg)

http://img503.imageshack.us/img503/2471/parafusosgp5.jpg
Link Great Image (http://img76.imageshack.us/img76/6180/1parafusosdf3.jpg)

[ulysses.cazuquel]

http://img253.imageshack.us/img253/8862/primeiroyc6.th.jpg (http://img253.imageshack.us/my.php?image=primeiroyc6.jpg)

http://img260.imageshack.us/img260/2574/segundoah1.th.jpg (http://img260.imageshack.us/my.php?image=segundoah1.jpg)

http://img405.imageshack.us/img405/6876/primeirory5.th.jpg (http://img405.imageshack.us/my.php?image=primeirory5.jpg)

http://img410.imageshack.us/img410/6449/grilliluminadamw0.th.jpg (http://img410.imageshack.us/my.php?image=grilliluminadamw0.jpg)

http://img174.imageshack.us/img174/9544/lateraliluminadajh3.th.jpg (http://img174.imageshack.us/my.php?image=lateraliluminadajh3.jpg)

http://img237.imageshack.us/img237/7272/umcs7.th.jpg (http://img237.imageshack.us/my.php?image=umcs7.jpg)

http://img237.imageshack.us/img237/7272/umcs7.th.jpg (http://img237.imageshack.us/my.php?image=umcs7.jpg)

http://img230.imageshack.us/img230/8430/tresbd5.th.jpg (http://img230.imageshack.us/my.php?image=tresbd5.jpg)

http://img461.imageshack.us/img461/7371/quatroqb1.th.jpg (http://img461.imageshack.us/my.php?image=quatroqb1.jpg)

http://img400.imageshack.us/img400/7639/cincomr2.th.jpg (http://img400.imageshack.us/my.php?image=cincomr2.jpg)

http://img400.imageshack.us/img400/6894/seisdr1.th.jpg (http://img400.imageshack.us/my.php?image=seisdr1.jpg)

http://img207.imageshack.us/img207/4653/setezk9.th.jpg (http://img207.imageshack.us/my.php?image=setezk9.jpg)

http://img413.imageshack.us/img413/6813/oitoyq6.th.jpg (http://img413.imageshack.us/my.php?image=oitoyq6.jpg)

http://img232.imageshack.us/img232/5800/novezt4.th.jpg (http://img232.imageshack.us/my.php?image=novezt4.jpg)

http://img232.imageshack.us/img232/7088/dezgd0.th.jpg (http://img232.imageshack.us/my.php?image=dezgd0.jpg)

http://img413.imageshack.us/img413/4701/onzepb4.th.jpg (http://img413.imageshack.us/my.php?image=onzepb4.jpg)

[ulysses.cazuquel]

http://img216.imageshack.us/img216/8286/primeirozc3.th.jpg (http://img216.imageshack.us/my.php?image=primeirozc3.jpg)

http://img223.imageshack.us/img223/6718/segundomp9.th.jpg (http://img223.imageshack.us/my.php?image=segundomp9.jpg)

http://img225.imageshack.us/img225/9337/terceiroem0.th.jpg (http://img225.imageshack.us/my.php?image=terceiroem0.jpg)

http://img222.imageshack.us/img222/1568/quartolh0.th.jpg (http://img222.imageshack.us/my.php?image=quartolh0.jpg)

http://img222.imageshack.us/img222/2659/quintoju9.th.jpg (http://img222.imageshack.us/my.php?image=quintoju9.jpg)

http://img233.imageshack.us/img233/6898/sextotu8.th.jpg (http://img233.imageshack.us/my.php?image=sextotu8.jpg)

http://img223.imageshack.us/img223/4436/setimosm5.th.jpg (http://img223.imageshack.us/my.php?image=setimosm5.jpg)

http://img228.imageshack.us/img228/6500/oitavozj4.th.jpg (http://img228.imageshack.us/my.php?image=oitavozj4.jpg)

http://img229.imageshack.us/img229/9062/nonoht2.th.jpg (http://img229.imageshack.us/my.php?image=nonoht2.jpg)

http://img225.imageshack.us/img225/5876/decimoqf0.th.jpg (http://img225.imageshack.us/my.php?image=decimoqf0.jpg)

[ulysses.cazuquel]

http://img132.imageshack.us/img132/2460/primeiroqq4.th.jpg (http://img132.imageshack.us/my.php?image=primeiroqq4.jpg)

http://img132.imageshack.us/img132/2879/segundosn3.th.jpg (http://img132.imageshack.us/my.php?image=segundosn3.jpg)

http://img218.imageshack.us/img218/323/terceirojw0.th.jpg (http://img218.imageshack.us/my.php?image=terceirojw0.jpg)

http://img138.imageshack.us/img138/7693/quartowz1.th.jpg (http://img138.imageshack.us/my.php?image=quartowz1.jpg)

http://img511.imageshack.us/img511/2640/quintomg9.th.jpg (http://img511.imageshack.us/my.php?image=quintomg9.jpg)

http://img511.imageshack.us/img511/4683/sextobk2.th.jpg (http://img511.imageshack.us/my.php?image=sextobk2.jpg)

http://img149.imageshack.us/img149/1676/decimohj2.th.jpg (http://img149.imageshack.us/my.php?image=decimohj2.jpg)

http://img90.imageshack.us/img90/5940/decimoprimeiroez1.th.jpg (http://img90.imageshack.us/my.php?image=decimoprimeiroez1.jpg)

http://img512.imageshack.us/img512/6597/dezcf7.th.jpg (http://img512.imageshack.us/my.php?image=dezcf7.jpg)

http://img137.imageshack.us/img137/876/nonoww0.th.jpg (http://img137.imageshack.us/my.php?image=nonoww0.jpg)

http://img153.imageshack.us/img153/3865/quartozemm1.th.jpg (http://img153.imageshack.us/my.php?image=quartozemm1.jpg)

http://img135.imageshack.us/img135/8817/quinzevl1.th.jpg (http://img135.imageshack.us/my.php?image=quinzevl1.jpg)

[ulysses.cazuquel]

http://img124.imageshack.us/img124/5527/primeiroqc3.th.jpg (http://img124.imageshack.us/my.php?image=primeiroqc3.jpg)

http://img103.imageshack.us/img103/5530/segundoxx6.th.jpg (http://img103.imageshack.us/my.php?image=segundoxx6.jpg)

[Darth Dad]

That is amazing dremel work...

I am usually happy with my dremeling when I finish and I still have 10 fingers! :p

+rep for being the dremel king

[ulysses.cazuquel]

That is amazing dremel work...

I am usually happy with my dremeling when I finish and I still have 10 fingers! :p

+rep for being the dremel king

Thanks darth

I am already thinking about the next cut but not on this project because it has more place :eek:

[FuzzyPlushroom]

Awesome work, UC! +rep for some incredible Dremel work!

One question: Where does the power supply fit in, now?

[jdbnsn]

:eek: You did that with a dremel??? I though it was lazer cut or something, wow that is amazing work!!!

[ulysses.cazuquel]

Awesome work, UC! +rep for some incredible Dremel work!

One question: here does the power supply fit in, now?

connectors mike's for adaptation that I will make in the necessary cabinet because the spower supply able was dislocated for low
http://img63.imageshack.us/img63/7807/conectoresua0.th.jpg (http://img63.imageshack.us/my.php?image=conectoresua0.jpg)

adaptation of finished connectors and plugs

http://img528.imageshack.us/img528/7294/umxj9.th.jpg (http://img528.imageshack.us/my.php?image=umxj9.jpg)

http://img264.imageshack.us/img264/5594/doisof8.th.jpg (http://img264.imageshack.us/my.php?image=doisof8.jpg)

http://img213.imageshack.us/img213/7661/tresdc0.th.jpg (http://img213.imageshack.us/my.php?image=tresdc0.jpg)

http://img515.imageshack.us/img515/7010/quatrons6.th.jpg (http://img515.imageshack.us/my.php?image=quatrons6.jpg)

http://img515.imageshack.us/img515/2839/cincokf7.th.jpg (http://img515.imageshack.us/my.php?image=cincokf7.jpg)

http://img45.imageshack.us/img45/7311/primeiroxt3.th.jpg (http://img45.imageshack.us/my.php?image=primeiroxt3.jpg)

http://img516.imageshack.us/img516/7665/quintovi7.th.jpg (http://img516.imageshack.us/my.php?image=quintovi7.jpg)

http://img129.imageshack.us/img129/2014/sextopb1.th.jpg (http://img129.imageshack.us/my.php?image=sextopb1.jpg)

http://img129.imageshack.us/img129/1133/setimoyh3.th.jpg (http://img129.imageshack.us/my.php?image=setimoyh3.jpg)

[ulysses.cazuquel]

:eek: You did that with a dremel??? I though it was lazer cut or something, wow that is amazing work!!!

Thanks jdbnsn
Cuts made by me using a dremel I was improving each cut
Here a link that posted before of my initial cuts

http://www.thebestcasescenario.com/forum/showthread.php?t=6521

[jdbnsn]

I remember seeing those but I never ealized that those were done with nothing more than a dremel. You are certainly a patient artist and that is some impressive work.

[ulysses.cazuquel]

I remember seeing those but I never ealized that those were done with nothing more than a dremel. You are certainly a patient artist and that is some impressive work.

Thanks jdbnsn,
The very best finishes of the cuts has made the cuts perfect

I in my next project will surely make a video showing my cuts
And certainly I will have the pleasure of posting here

[ulysses.cazuquel]

I made the cover of the box where put the power supply
Being made of a thick metal would be easier to cut each side but I decided shapes and was perfectly embedded In the box
I prefer to use screws on the cover for box

I made a cut to plug the box in case
I have to decide whether to put 1 or 2 coolers and to put a graphic display
I will make an effect using acrylic, metal and leds white
Painting the cover of the box in the same color of the case

http://img90.imageshack.us/img90/7306/primeiroap1.th.jpg (http://img90.imageshack.us/my.php?image=primeiroap1.jpg)

http://img90.imageshack.us/img90/1977/segundomb4.th.jpg (http://img90.imageshack.us/my.php?image=segundomb4.jpg)

http://img510.imageshack.us/img510/2858/terceiroxu3.th.jpg (http://img510.imageshack.us/my.php?image=terceiroxu3.jpg)

http://img221.imageshack.us/img221/160/quartoes0.th.jpg (http://img221.imageshack.us/my.php?image=quartoes0.jpg)

http://img116.imageshack.us/img116/8387/quintoqn4.th.jpg (http://img116.imageshack.us/my.php?image=quintoqn4.jpg)

http://img221.imageshack.us/img221/7199/sextoly5.th.jpg (http://img221.imageshack.us/my.php?image=sextoly5.jpg)

http://img103.imageshack.us/img103/1149/setimono4.th.jpg (http://img103.imageshack.us/my.php?image=setimono4.jpg)

http://img219.imageshack.us/img219/8217/oitavotm3.th.jpg (http://img219.imageshack.us/my.php?image=oitavotm3.jpg)

[|NQ|Squelsh]

Those dragons are simply beautiful! +One more rep from a person who doesn't like tribal stuff at all :)
Dremel work at its best!

[ulysses.cazuquel]

Those dragons are simply beautiful! +One more rep from a person who doesn't like tribal stuff at all :)
Dremel work at its best!

Thanks |NQ|Squelsh,
First adjustment made on the cover of the box
I will use only 1 cooler of 8x8 with leds blue
With the end of the screen in the background of metal
And sendl make this gril dragon customized
This grill that I am using as test was that I cut

http://img91.imageshack.us/img91/3619/primeironq2.th.jpg (http://img91.imageshack.us/my.php?image=primeironq2.jpg)

http://img240.imageshack.us/img240/8586/segundojf6.th.jpg (http://img240.imageshack.us/my.php?image=segundojf6.jpg)

http://img112.imageshack.us/img112/3654/terceirofr9.th.jpg (http://img112.imageshack.us/my.php?image=terceirofr9.jpg)

http://img132.imageshack.us/img132/4198/quartoak5.th.jpg (http://img132.imageshack.us/my.php?image=quartoak5.jpg)

http://img91.imageshack.us/img91/9594/quintowf0.th.jpg (http://img91.imageshack.us/my.php?image=quintowf0.jpg)

http://img408.imageshack.us/img408/7256/silverdragonjt1.th.jpg (http://img408.imageshack.us/my.php?image=silverdragonjt1.jpg)

[ulysses.cazuquel]

The Personalized grill Silver Dragon manufactured by my friend Mr. Shinji's Hardmodding.cl

http://img525.imageshack.us/img525/8587/dscn2071ll9.jpg

[Gun Down]

Amazing work man can with to see when its all done +rep

[ulysses.cazuquel]

Amazing work man can with to see when its all done +rep

Thanks Gun Down,
I made a last finish on the cover of the box
And I am thinking make a base of the acrylic with led to put under the box
and with that improve the ventilation of the power supply

http://img250.imageshack.us/img250/181/primeiroym2.jpg

[jdbnsn]

SgtM published you on the front page! :eek:

[The boy 4rm oz]

Mate, I haven't checked on this for a while. You have made great progress. I love those grills. +rep

[SgtM]

SgtM published you on the front page! :eek:

You deserve it man. Keep up the good work.

[ulysses.cazuquel]

You deserve it man. Keep up the good work.

Thanks SgtM and And friends of thebestcasescenario,
I am working on a new Modification
Next week I start to work on this modification

http://img403.imageshack.us/img403/6915/agaricgreywolffa9.jpg

This cut was an easy because cuts in a metal fine but prejudice in a little to make the finish we begin to do tomorrow

Make the cut in acrylic of the same design And will use leds in the background

http://img126.imageshack.us/img126/9730/umhv0.jpg

I started to do the finishing in cuts that I ends tomorrow


http://img505.imageshack.us/img505/3746/umpt1.jpg

http://img146.imageshack.us/img146/4139/doiskg8.jpg

[The boy 4rm oz]

Very nice metal work.

[cured]

That is amazing!!!!! +rep man.

[ulysses.cazuquel]

Very nice metal work.

Thanks The boy 4rm oz and cured,

First part of the finished cut and Finishing small to finalize
Tomorrow start making the cut in acrylic

http://img137.imageshack.us/img137/7536/s5033763uz1.jpg

[billygoat333]

case looks really good. :) +rep

[ulysses.cazuquel]

case looks really good. :) +rep

http://img469.imageshack.us/img469/3473/umjk4.jpg

[ulysses.cazuquel]

http://img88.imageshack.us/img88/9269/tribalboxzs0.jpg

[The boy 4rm oz]

Looking good mate.

[ulysses.cazuquel]

Looking good mate.


THANKS THE BOY 4RM OZ,

Great friend em3bilko thank you for all your comments and Merry Christmas and Happy Modding to you and all the Modders-inc.
Image to show how I raised in the tribal project
The cap of the box I will paint the same color of the case and tribal paint of a different color
Make the lighting of the tribal with more than 20 leds blue
The display will use that will have a blue background with white letters

http://img137.imageshack.us/img137/2292/quatrois5.jpg

[p0Pe]

that looks great dude!.. +rep for kickass dragons:)

[The boy 4rm oz]

In my opinion this just keeps getting better and better. Can't wait to see the finished product.

[Khuz360]

That is absolutely awesome I cant believe that all that work was done with a dremmel!!! I am really looking forward to seeing the finished product Im sure it will sweet. +rep

[silverdemon]

wow, must've took some time! but it shows! great work

[ulysses.cazuquel]

Thanks very much silverdemon,Khuz360,The boy 4rm oz and p0Pe

After I count how I had the idea of create those grills totally personalized


http://img174.imageshack.us/img174/2374/grillsscb0.jpg

[The boy 4rm oz]

Holy crap, they look bloody fantastic :eek:. +rep

[ulysses.cazuquel]

Thank very much the Danger Den my sponsor because you believed in me and in my project

Here this the first pictures and tomorrow I will take pictures of each product separately to show every detail

I will also explain everything related on watercooler project to my current project of casemodding

http://img165.imageshack.us/img165/3325/oneol6.jpg

http://img183.imageshack.us/img183/5251/twobp3.jpg

http://img183.imageshack.us/img183/5948/threebi7.jpg

http://img150.imageshack.us/img150/1682/fivega6.jpg

[p0Pe]

looks god, but you arent allowed to post sponsors in other posts than the first of your log:)

plz read the rules of the forum and edit it out:P (dont know if you have to edit it out of the pics too?)

http://www.thebestcasescenario.com/forum/showthread.php?t=8337

still cant wait to see what you put into that nice case:D

[Luke122]

Pope is right, please move the sponsor image to the first post, but dont worry about editing it out of the images. :)

Congrats on the sponsorship! The project is looking terriffic, I'm a big fan of your dremel work. :)

[The boy 4rm oz]

Ooooooooooooo, W/C stuff.

[ulysses.cazuquel]

Ooooooooooooo, W/C stuff.

Thanks Friend The boy 4rm oz,

The type of CRON clamp all in stainless steel AISI 304 can be used both in soft and semi-rigid hoses. Due to its design, with the dislocated thread in the band, offers a better radial force.

http://img178.imageshack.us/img178/5496/twoiu1.th.jpg (http://img178.imageshack.us/my.php?image=twoiu1.jpg)

http://img178.imageshack.us/img178/1535/threehw3.th.jpg (http://img178.imageshack.us/my.php?image=threehw3.jpg)

http://img118.imageshack.us/img118/4200/fourfo8.th.jpg (http://img118.imageshack.us/my.php?image=fourfo8.jpg)

[The boy 4rm oz]

I was going to use clamps like that but opted for the complete stainless version of those plastic clamps. We use them a lot in the vineyard and there is no way they are going to snap in my rig lol. The only reason I didn't go for the the clamps you are using is because they cost me about $1-1.5AUD and I need about 20 of them where as I get the stainless steel clamps for free.

[ulysses.cazuquel]

Products from my sponsor Lamptron
2 kits cold cathod Color blue
1 fan crystal ultra silence of 80x80
Remote Control RC3
2 CCFL Extension Cable
A sample of the power of illumination of the cold cathod of Lamptron

http://img239.imageshack.us/img239/4544/s5033946uy5.jpg

http://img152.imageshack.us/img152/1848/onetp5.th.jpg (http://img152.imageshack.us/my.php?image=onetp5.jpg)

http://img184.imageshack.us/img184/5707/twozu2.th.jpg (http://img184.imageshack.us/my.php?image=twozu2.jpg)

http://img156.imageshack.us/img156/6285/threehh0.th.jpg (http://img156.imageshack.us/my.php?image=threehh0.jpg)

http://img262.imageshack.us/img262/2493/fourab2.th.jpg (http://img262.imageshack.us/my.php?image=fourab2.jpg)

http://img205.imageshack.us/img205/6052/fivebs9.th.jpg (http://img205.imageshack.us/my.php?image=fivebs9.jpg)

http://img147.imageshack.us/img147/1553/sixzv2.th.jpg (http://img147.imageshack.us/my.php?image=sixzv2.jpg)

http://img147.imageshack.us/img147/3853/sevenbl9.th.jpg (http://img147.imageshack.us/my.php?image=sevenbl9.jpg)

[The boy 4rm oz]

That lighted pic looks sooo awesome, great work.

[ulysses.cazuquel]

http://img512.imageshack.us/img512/6442/twobl9.jpg


http://img511.imageshack.us/img511/7296/quinzemw8.jpg

http://img142.imageshack.us/img142/2371/dezeseisme8.jpg

http://img219.imageshack.us/img219/3172/dezeseteqr3.jpg

http://img219.imageshack.us/img219/5161/dezeoitotn6.jpg

http://img90.imageshack.us/img90/2658/dezenovext3.jpg

[The boy 4rm oz]

Mate that pic is awesome, now I know why you wanted to know about radiator placement lol.

[Ap1thy]

wow... looks great, such detailed work on the case

[silverdemon]

LOVE IT!, can't wait to see it totally finished, those waterblocks look great!

[ulysses.cazuquel]

Mate that pic is awesome, now I know why you wanted to know about radiator placement lol.

Thanks Friend,
After I put as been the position of my radiator

Thanks ASCStinger
I hope to you continue "looks great" with the novelty of my project

Thanks silverdemon
My project this 40% completed and missing 60% of novelty

http://img503.imageshack.us/img503/5062/tresel8.jpg

[The boy 4rm oz]

Judging by that pic you could mount the radiator on the rear of your case. Have the fittings going through just under the Asian characters, you wouldn't even need a spacer (I needed one because I didn't want to cut the standard grill off the case).

[ulysses.cazuquel]

Thanks very much my friend Gam help me by sending high-quality products to my project
Heatshrink white, Flexo Mylar Chrome and Switches Illuminated
I will change my project in the next months because I am trying to get all the goods before returning to modify
Some products are very difficult and that this caused the delay

http://img297.imageshack.us/img297/9983/pic0041ae3.th.jpg (http://img297.imageshack.us/my.php?image=pic0041ae3.jpg)

http://img86.imageshack.us/img86/189/pic0038nq8.th.jpg (http://img86.imageshack.us/my.php?image=pic0038nq8.jpg)

http://img149.imageshack.us/img149/7994/pic0045uv5.th.jpg (http://img149.imageshack.us/my.php?image=pic0045uv5.jpg)

http://img86.imageshack.us/img86/3332/pic0049tn5.jpg

http://img86.imageshack.us/img86/9854/pic00400xe5.jpg

[ulysses.cazuquel]

Testing the lighting I made in letters using white leds

http://img257.imageshack.us/img257/3909/ummys9.jpg

[The boy 4rm oz]

That pic looks great, the letters are fantastic.

[Frenkie]

Amazing ! such detail! I love it !

What I miss are in-between shots, you know, pictures of you half way the cuts, while you are working on it. Dont you have those?

[ulysses.cazuquel]

Amazing ! such detail! I love it !
What I miss are in-between shots, you know, pictures of you half way the cuts, while you are working on it. Dont you have those?

You talking about this my pictures cutting ? Is this?

Thanks Friend The boy 4rm oz and Frenkie

http://img141.imageshack.us/img141/383/onedw2.jpg

[Tavarin]

Looks great, keep up the good work +rep

[ulysses.cazuquel]

Looks great, keep up the good work +rep

Thanks Tavarin

I will work very much to keep up the good work

http://img218.imageshack.us/img218/7835/trescv3.jpg

[p0Pe]

DAMN that thing is nice:P now just put some hardcore hardware inthere:P

+rep:)

[billygoat333]

wow those pics rock! great job so far, cant wait to see the case filled!

[ulysses.cazuquel]

I am back!!!
Here pictures of more products sent directly from my Sponsor
I am very happy with the quality and beauty products

Case handles of aluminum Silver
SlotProtector-SP1 color Blue
Ultra Silent Fan Kit 120
Kit Cold Cathod Blue Dimension 300mm*4mm and 100mm*4mm CCFL Tube
CCFL Extension Cable


http://img166.imageshack.us/img166/2956/umon7.th.jpg (http://img166.imageshack.us/my.php?image=umon7.jpg)

http://img172.imageshack.us/img172/7343/doistc8.th.jpg (http://img172.imageshack.us/my.php?image=doistc8.jpg)

http://img390.imageshack.us/img390/2748/tresaa2.th.jpg (http://img390.imageshack.us/my.php?image=tresaa2.jpg)

http://img360.imageshack.us/img360/3462/quatrook9.th.jpg (http://img360.imageshack.us/my.php?image=quatrook9.jpg)

http://img166.imageshack.us/img166/4272/cincooe7.th.jpg (http://img166.imageshack.us/my.php?image=cincooe7.jpg)

http://img399.imageshack.us/img399/4417/seisua4.th.jpg (http://img399.imageshack.us/my.php?image=seisua4.jpg)


http://img399.imageshack.us/img399/1685/setezp0.jpg

http://img413.imageshack.us/img413/3503/oitomg3.jpg

http://img129.imageshack.us/img129/8515/novecb0.jpg

http://img129.imageshack.us/img129/249/dezjg8.jpg

[ulysses.cazuquel]

Until seems that these Cases Handles were perfectly made to be used in my project

http://img141.imageshack.us/img141/8619/umit8.jpg

http://img141.imageshack.us/img141/2479/doisfc2.jpg

http://img248.imageshack.us/img248/5184/tresld5.jpg

http://img248.imageshack.us/img248/8915/quatrowy2.jpg

http://img141.imageshack.us/img141/3036/cincopy2.jpg

[Talon]

Mate you have quite the talent with that dremel! Im going to join the band wagon and ask if you will make a tutorial/demonstration as to how you get your cuts so perfect. Fantastic work once again!

[ulysses.cazuquel]

Mate you have quite the talent with that dremel! Im going to join the band wagon and ask if you will make a tutorial/demonstration as to how you get your cuts so perfect. Fantastic work once again!

Thanks you very Much,
Certainly in the future I will make a tutorial or something on my cuts

Deciding change some things And in two or three days I will have new photos

But enjoying the weekend Finished the mould of acrylic I made with the dremel for the mould of metal
Will receive an effect of light with leds

http://img391.imageshack.us/img391/6659/moldemetallc0.jpg

http://img84.imageshack.us/img84/2681/moldeacrilicotq9.jpg

[ulysses.cazuquel]

Pictures new mainly showing the effect of green leds
The result of the effect was beautiful and perfect
The white leds has not the end result expected

http://img167.imageshack.us/img167/9306/umhk5.jpg

http://img237.imageshack.us/img237/3039/doissr3.jpg

http://img257.imageshack.us/img257/8738/tresye7.jpg

http://img120.imageshack.us/img120/4954/quatrozn8.jpg

http://img296.imageshack.us/img296/3706/cincowj8.jpg

http://img441.imageshack.us/img441/9268/seiszb7.jpg

http://img520.imageshack.us/img520/1346/seteen8.jpg

http://img520.imageshack.us/img520/890/oitouz5.jpg

[The boy 4rm oz]

Very very very nice work there.

[KemMotaRD]

Dude, this case is crazy!!! I want it!!!
+rep

[Okele]

Ok I love the case, but that fan cover makes me want to cry. Thats the sweetest fan cover I have ever seen!

[ulysses.cazuquel]

Very very very nice work there.

Thanks very very veery very much my friend The boy 4rm oz, KemMotaRD and Okele

When I had the idea of making my grills with the format round and with letters in borders because I thought make a very beautiful lighting
Need some adjustments to the final lighting be perfect

http://img146.imageshack.us/img146/5010/umor5.jpg

http://img267.imageshack.us/img267/7540/doisip9.jpg

[The boy 4rm oz]

:eek:

That is bloody amazing.

[ulysses.cazuquel]

:eek:

That is bloody amazing.

Thanks Friend,

Now I am happy with the end result of lighting on the letters I made with green leds

http://img247.imageshack.us/img247/8462/grillsp4.jpg

[Okele]

My wife is insane, I'll say it now. She looked at this case and was like "oh thats awesome, you can do that for my case honey". WTF?! ya maybe in like 5 years after Ive lost a couple digits to dremel accidents. No worries Ive already called the authorities to have her committed, cept they have a waiting list a mile long so it will be sometime next year.

Anyway, this case is one of my favorites.

[The boy 4rm oz]

Nice work.

[p0Pe]

that look insane man! the world would be a better place if we could ctrl-c your skillzor:P...
+rep!

[ulysses.cazuquel]

that look insane man! the world would be a better place if we could ctrl-c your skillzor:P...+rep!

Thanks very much p0Pe, The boy 4rm oz and Okele

Test of my next change that I am making
34 green LEDs are installed but found 4 to 6 points lacking in lighting
And also finishing in new mold of acrylic that I am making

http://img301.imageshack.us/img301/1922/luzverdeta5.jpg

[The boy 4rm oz]

As I said earlier. Bloody fantastic work.

[DonT-FeaR]

agreed

omg crtl c his skillz that would be killer

[ulysses.cazuquel]

As I said earlier. Bloody fantastic work.

Thanks very much my friend The boy 4rm oz and DonT-FeaR

New image that shows what dimension will have my project when finalized
Currently it is in 50% completed

http://img510.imageshack.us/img510/1984/fotoumqk0.jpg

http://img166.imageshack.us/img166/1148/unowi5.jpg

[The boy 4rm oz]

50% completed you say? Looks great for only being half done. Keep it up.

[DonT-FeaR]

hate to repeat myself but agreed wow thats *peter grifin voice* 'freakin sweet'

[Drum Thumper]

I've forgotten how hardcore you Brazilians are. Very nice work!

[vastonecat]

I am just amazed at how efficiently you have hidden all the wires for your lights. Other than the back shot I don't think I have seen one wire.
+ rep

[DonT-FeaR]

omg that is so true im gunna say +1 as well it is like finger licking good man

[ulysses.cazuquel]

omg that is so true im gunna say +1 as well it is like finger licking good man

Thanks DonT-FeaR, Friend The boy 4rm oz, vastonecat and DrumThumper

Photos with the new cold cathods of lamptron
I need to make some small adjustments in lighting of the side panel

http://img20.imageshack.us/img20/2340/primeiraxg3.jpg

http://img524.imageshack.us/img524/4113/quartoqi4.jpg

http://img257.imageshack.us/img257/8467/oitowt3.jpg

[The boy 4rm oz]

I really do love how the green and blue goes so well with each other.

[ulysses.cazuquel]

I really do love how the green and blue goes so well with each other.

Thanks Friend,

Remember That all internal lighting will be blue to contrast with the external lighting that is green

Needs small adjustments on the effect of blue cooler with a grill with green leds

http://img241.imageshack.us/img241/9581/tres1ri0.jpg

http://img407.imageshack.us/img407/2279/quatromu6.jpg

[ulysses.cazuquel]

With great pleasure and pride I take my project but a product of high quality "GX Typhoon USB Graphic Display" manufactured by Matrix Orbital

In this image show where "GX Typhoon USB Graphic Display" will be placed in my project

In another image my newest change to my project

http://img520.imageshack.us/img520/6655/doisha7.jpg

http://img145.imageshack.us/img145/6683/letrarx3.jpg

[jdbnsn]

very cool looking plans Ulysses, this mod is mind blowing!

[The boy 4rm oz]

I agree.

[ulysses.cazuquel]

very cool looking plans Ulysses, this mod is mind blowing!

Thanks jdbnsn and The boy 4rm oz

Today I made the finish in letters of metal and tomorrow I will do the Mould of acrylic of the letters

http://img353.imageshack.us/img353/7734/letraacabamentokv2.jpg

[Tarenmor]

Amazing work with a dremel! =o

:D +Rep

[ulysses.cazuquel]

Amazing work with a dremel! =o

:D +Rep

Thanks Tarenmor

The image says more than any words

http://img241.imageshack.us/img241/9986/newmodificationlo2.jpg

Finished the adaptation in lighting the cooler fan of the master which is horrible
Also a photo to show as this will part of my project that lack some changes

http://img181.imageshack.us/img181/3526/boxxd8.jpg

http://img509.imageshack.us/img509/2113/94540622kp7.th.jpg (http://img509.imageshack.us/my.php?image=94540622kp7.jpg)

http://img181.imageshack.us/img181/6450/23188540tu2.th.jpg (http://img181.imageshack.us/my.php?image=23188540tu2.jpg)

http://img509.imageshack.us/img509/8938/11843288jm7.th.jpg (http://img509.imageshack.us/my.php?image=11843288jm7.jpg)

[The boy 4rm oz]

Very cool.

[ulysses.cazuquel]

Today reached my lcd of Matrix Orbital

I have a lot to thank this collaboration of the Matrix Orbital by believing in me and in my project
Next week I start to design the lcd on my Case

GX24064-TC-BBI-MCE
Tri Color display with black aluminum bay insert. MCE remote and 3ft A to B Mini USB included

http://img391.imageshack.us/img391/1755/umpn7.th.jpg (http://img391.imageshack.us/my.php?image=umpn7.jpg)

http://img517.imageshack.us/img517/8913/doisff9.th.jpg (http://img517.imageshack.us/my.php?image=doisff9.jpg)

http://img391.imageshack.us/img391/6024/tresht8.th.jpg (http://img391.imageshack.us/my.php?image=tresht8.jpg)

http://img391.imageshack.us/img391/932/quatrocu9.th.jpg (http://img391.imageshack.us/my.php?image=quatrocu9.jpg)

http://img517.imageshack.us/img517/1772/cincogp1.th.jpg (http://img517.imageshack.us/my.php?image=cincogp1.jpg)

http://img292.imageshack.us/img292/7707/seismz7.th.jpg (http://img292.imageshack.us/my.php?image=seismz7.jpg)

[Okele]

You know, my wife saw this case and said "hey why dont you do something like that?" I told her "because by the time I get good enough with a dremel to do this our child will be sending us to an old folks home, and they dont let you play with power tools".


At any rate, awesome work man. This case is truly a work of art, I for one cant wait to see it finished.

[The boy 4rm oz]

Can't wait to see that LCD powered up mate. Good luck.

[ulysses.cazuquel]

You know, my wife saw this case and said "hey why dont you do something like that?" I told her "because by the time I get good enough with a dremel to do this our child will be sending us to an old folks home, and they dont let you play with power tools".


At any rate, awesome work man. This case is truly a work of art, I for one cant wait to see it finished.

Thanks to you and your wife
Certainly you will to do one day a project equal to or better than the my

Thanks my Friend The boy 4rm oz

I today made the cut in the box to adjust the GX Typhoon USB Graphic Display

The quality of the GX Typhoon MCE by Matrix Orbutal is very nice

Need small adjustments, but I will make in the course of the project

http://img171.imageshack.us/img171/6762/umsq1.jpg

http://img169.imageshack.us/img169/5431/s5035007jv8.jpg

[Fuganater]

wow still going good!

[The boy 4rm oz]

LCD looks good in that position. Good to finally see a motherboard in that awesome case ;).

[ulysses.cazuquel]

LCD looks good in that position. Good to finally see a motherboard in that awesome case ;).

This motherboard is damaged, only to test
Thanks my Friend and Fuganater

http://img181.imageshack.us/img181/6219/imagem1lp7.jpg

http://img147.imageshack.us/img147/373/doissko1.jpg

[ulysses.cazuquel]

I started the installation of the green leds in kanjis and the result has been very good

Still have to install green leds in two more letters that I will finish next week because the leds ended

I need improve the lighting blue in this part of my project

http://img169.imageshack.us/img169/8207/onelp7.jpg

http://img292.imageshack.us/img292/7210/twouv3.jpg

http://img90.imageshack.us/img90/2852/fourlu9.jpg

http://img301.imageshack.us/img301/2751/fiveho0.jpg

[The boy 4rm oz]

Your right, the lighting on the Kanji looks great.

[ulysses.cazuquel]

Your right, the lighting on the Kanji looks great.

Thanks The boy 4rm oz

To improve the blue light of my project this side panel
I decided cuts almost all metal of supports of the motherboard
Only the place where is the Memory ram need more care
The case was left with one aspect of case of acrylic improving its visual

http://img504.imageshack.us/img504/6599/umls7.th.jpg (http://img504.imageshack.us/my.php?image=umls7.jpg)

http://img504.imageshack.us/img504/7753/tresyu7.jpg

http://img504.imageshack.us/img504/9099/cincojb0.jpg

[the__dark]

Hey ulysses =D I'm El_Dark @HM.cl

Your case looks sweet, I forgot to ask you in HM, how do you plan to use that green platform in your case? or is it just to show the cathodes?

btw +rep'ed =P

[TraitorJackKnives]

Your dremel work looks amazing, I really like how all the dragons fit so well together. I'll be watching for more of your great work.

[ulysses.cazuquel]

Your dremel work looks amazing, I really like how all the dragons fit so well together. I'll be watching for more of your great work.

Thanks TraitorJackKnives and the__dark,

decided put all of the changes made in my project of casemod and take pictures to post
To test how everything was put on the case
is much more beautiful pictures but after I will post

http://img329.imageshack.us/img329/9269/s5035415ut0.jpg

[The boy 4rm oz]

That looks fantastic, great work.

[ulysses.cazuquel]

That looks fantastic, great work.

http://img517.imageshack.us/img517/9397/s50mw0.jpg

http://img141.imageshack.us/img141/1964/s503ea7.jpg

http://img148.imageshack.us/img148/5937/86202533ij6.jpg

http://img88.imageshack.us/img88/3006/15676463gb6.jpg

http://img76.imageshack.us/img76/2338/83077644iv4.jpg

http://img213.imageshack.us/img213/2053/s5035456mw8.jpg

http://img88.imageshack.us/img88/6843/s5035458sp4.jpg

http://img178.imageshack.us/img178/4196/47063888mq4.jpg

http://img145.imageshack.us/img145/3983/60108709om7.jpg

http://img512.imageshack.us/img512/1042/58759066ju3.jpg

[The boy 4rm oz]

I would have to say this is one of my favorite mods happening at the moment. Those PCI covers look fantastic. How much work do you think you have left?

[ulysses.cazuquel]

I would have to say this is one of my favorite mods happening at the moment. Those PCI covers look fantastic. How much work do you think you have left?

Thanks The boy 4rm oz

Next week I start to work in front of my project
Only adding a Fan cooler of quality and beauty improved the look of case
I changed the Fan cooler on the basis of acrylic for a place on the basis of aluminium

http://img161.imageshack.us/img161/8697/seishe0.th.jpg (http://img161.imageshack.us/my.php?image=seishe0.jpg)

http://img214.imageshack.us/img214/8902/seteoi7.jpg

[The boy 4rm oz]

Great, I can't wait to see what you have up your sleeve for the front of the case.

[TheMainMan]

I love the PCI covers. It puts an insanely detailed mod over the top! Nice work!

[DonT-FeaR]

i really like the onx or whatever on the back next to the pci covers

[daft-parrot]

Exquisite beautiful awe-inspiring I love this case the workmanship is exquisite you are truly a master

[ulysses.cazuquel]

Some products that I received to use in my project
Evercool that sponsors my project with high quality products

Evercool
http://img391.imageshack.us/img391/1821/evercooldm8.th.jpg (http://img391.imageshack.us/my.php?image=evercooldm8.jpg)

http://img86.imageshack.us/img86/4733/evercool1pg8.th.jpg (http://img86.imageshack.us/my.php?image=evercool1pg8.jpg)

http://img86.imageshack.us/img86/313/evercool2xr6.th.jpg (http://img86.imageshack.us/my.php?image=evercool2xr6.jpg)

[The boy 4rm oz]

A long time since an update mate. Looks great. Nice new gear.

[ulysses.cazuquel]

A long time since an update mate. Looks great. Nice new gear.


Two new pictures to you my friend

The first is the position that should be my radiator
another is the basis of the letter is cut in yellow acrylic flourescente
what your opinion?


http://img73.imageshack.us/img73/4208/s5036032hd0.th.jpg (http://img73.imageshack.us/my.php?image=s5036032hd0.jpg)

Testing the quality of my CRON CLAMP, very good and very beautiful.
Adding more a fan cooler Evercool of 120

[The boy 4rm oz]

Radiator placement looks good. Isn't it a bit far from the case though, looks a bit out of place. Those letters look fantastic.

[ulysses.cazuquel]

http://img214.imageshack.us/img214/8902/seteoi7.jpg

[ulysses.cazuquel]

I am repeating the basis of acrylic but now using acrylic yellow fluorescent

How were made almost manually using sandpaper, took 1 week to be made

I have to make the acrylic base of the letters silver dragon and also the cross ankh

http://img398.imageshack.us/img398/9755/oneqe2.jpg

[The boy 4rm oz]

1 week you say. Geeze you have patience mate.

[ulysses.cazuquel]

1 week you say. Geeze you have patience mate.

Thanks Friend, work small details in acrylic is very difficult :D

I needed make modification to the Tubing for my watercooler
I liked the result of the modification
My great thanks to Evercool

http://img165.imageshack.us/img165/4872/threeqz3.th.jpg (http://img165.imageshack.us/my.php?image=threeqz3.jpg)

[ulysses.cazuquel]

I modified the green acrylic of the Baybus for acrylic yellow fluorescent that I will use all in my project
I like very much the result

Lamptron Hummer 5-Port Military Switch Baybus
Review (http://www.legitreviews.com/article/744/1/)

http://img386.imageshack.us/img386/44/83122239uh0.th.jpg (http://img386.imageshack.us/my.php?image=83122239uh0.jpg)

http://img386.imageshack.us/img386/7734/97309900gm8.th.jpg (http://img386.imageshack.us/my.php?image=97309900gm8.jpg)

http://img383.imageshack.us/img383/8605/51790280zi5.jpg

http://img162.imageshack.us/img162/8361/2awh4.jpg

http://img162.imageshack.us/img162/9953/1asf5.th.jpg (http://img162.imageshack.us/my.php?image=1asf5.jpg)

http://img386.imageshack.us/img386/719/3avk1.th.jpg (http://img386.imageshack.us/my.php?image=3avk1.jpg)

http://img99.imageshack.us/img99/6726/4apy7.th.jpg (http://img99.imageshack.us/my.php?image=4apy7.jpg)

[DonT-FeaR]

thats really cool i like it nice milatary switches

[The boy 4rm oz]

Very nice switch panel mate. Really matches the mod.

[DragonHeart]

WOW!!! This case is simply AWESOME! Cant wait to see the finished project

[ulysses.cazuquel]

Very nice switch panel mate. Really matches the mod.

Thanks friend The boy 4rm oz, DragonHeart and DonT-FeaR

Always I dreamt to have my grills chrome but as my grills are made of aluminum this was almost impossible.
But I found a chromium the basis of painting in Brazil METALCLEAN (http://metalclean.com.br/galeria/index.php)
Here photos from before and after of the chromium

http://img374.imageshack.us/img374/4292/dscn2432bt8.th.jpg (http://img374.imageshack.us/my.php?image=dscn2432bt8.jpg)

http://img365.imageshack.us/img365/1315/grillcromada3fk4.jpg

[The boy 4rm oz]

Now that looks COOL. Looks much better in the chrome.

[ulysses.cazuquel]

Now that looks COOL. Looks much better in the chrome.

Thanks my Friend,

After 3 weeks working in front of my project here is the first picture exclusively to my friends
There is still some modifications to be made
tomorrow I put more photos

http://img255.imageshack.us/img255/3943/s5036537ol7.jpg

[ulysses.cazuquel]

Photo of today but I still have many changes being made, much improving the final result because I want to make the front of my project a work of art

http://img369.imageshack.us/img369/6403/fotopciu7.jpg

Always looking to innovate I imagined a front that the accessories would be in self relief and achieve an result very beautiful

http://img293.imageshack.us/img293/9263/pcfoto2cp7.jpg

I will use more two 5.25" drives bay but I am also thinking of putting an Color 7" LCD Video Module
I have some ideas and I will define next week

http://img411.imageshack.us/img411/3888/foto6on2.jpg

http://img411.imageshack.us/img411/1295/fotopc4id5.jpg

[The boy 4rm oz]

Aork of art indeed it is. I love how you used the plastic under the vandel switches, I may use that.

[ulysses.cazuquel]

Aork of art indeed it is. I love how you used the plastic under the vandel switches, I may use that.

Thanks The boy 4rm oz

Really use the plastic under the vandel switches was a great idea my :D

It was necessary two weeks working in the cuts of artisan form on molds of acrylic the name to silver dragon

I am very happy with the result

http://img258.imageshack.us/img258/936/umpr2.th.jpg (http://img258.imageshack.us/my.php?image=umpr2.jpg)http://img258.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

http://img150.imageshack.us/img150/5232/doisch2.th.jpg (http://img150.imageshack.us/my.php?image=doisch2.jpg)http://img150.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

http://img150.imageshack.us/img150/6041/tresdg3.jpg

http://img524.imageshack.us/img524/7164/quatroqc4.th.jpg (http://img524.imageshack.us/my.php?image=quatroqc4.jpg)http://img524.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

http://img401.imageshack.us/img401/9487/cincocu9.jpg

[DonT-FeaR]

nice work man i like it muchly

[The boy 4rm oz]

What can I say, black and green just goes together lol.

[DonT-FeaR]

rofl.... i agree........ and does black and red..

[AMD Killa]

It took me half an hour to read through all 16 pages of this project. I think it has been the best half an hour I have ever spent at a pc :D. I love your dremal work, and I am in awe with your lighting and fan covers.

You gotta love Microsoft sometimes XD. I just got 5 copies of Windows Home Server for free XD. I know they are only 120 day demos, but 5*120 = over 1 and a half years! By then I would probably have enough spare cash to buy a copy.

[SXRguyinMA]

amazing work, +rep

[ulysses.cazuquel]

It took me half an hour to read through all 16 pages of this project. I think it has been the best half an hour I have ever spent at a pc :D. I love your dremal work, and I am in awe with your lighting and fan covers.

Thanks AMD Killa, DonT-FeaR, SXRguyinMA and The boy 4rm oz

I added in the front of my project a Character LCD Modules 40x2 that was kindly supplied by Lumatronic :D

http://img517.imageshack.us/img517/4880/s5036800rd9.th.jpg (http://img517.imageshack.us/my.php?image=s5036800rd9.jpg)http://img517.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

http://img442.imageshack.us/img442/2913/s5036813yw6.th.jpg (http://img442.imageshack.us/my.php?image=s5036813yw6.jpg)

http://img87.imageshack.us/img87/4338/frente1rn3.jpg

[The boy 4rm oz]

LCD goes perfectly with the rest of the front detail.

[SXRguyinMA]

sure does, looks nice in there :)

[ulysses.cazuquel]

LCD goes perfectly with the rest of the front detail.

Thanks The boy 4rm oz and SXRguyinMA,

My initial idea would be the contrast of the blue to the green but the result with the Character LCD Modules 40x2 Green really finished being better

What is the option of you?

http://img175.imageshack.us/img175/1204/frentev2zw0.jpg

http://img249.imageshack.us/img249/3311/frentev3iu9.jpg

[SXRguyinMA]

I think it looks great!

[The boy 4rm oz]

Yeah the green looks way better than blue.

[DonT-FeaR]

green.... but honestly i didnt even see it to start with lol

love it...

[ulysses.cazuquel]

First of all I must say I am extremely grateful of XSPC be an collaborator to my project

Thanks you very much to my Friend Paul of XSPC

Initially my idea was to build my own reservoir because one of the principles of the casemodding is personalizes to the maximum their Project using their qualities as Modder using the minimum possible of tools and advanced machines, as products manufactured ready for use. "Viva o Casemod Arte"

But in some cases this is unavoidable because nor the best of the Modders are capable of making products so perfect as the XSPC Passive Aluminium Reservoir

The reservoirs XSPC 250 Passive Reservoir Aluminum products are of high quality and very beautiful

XSPC 250 Passive Aluminium Reservoir - "Black"

http://xspc.biz/res250.php

XSPC 250 Passive Aluminium Reservoir - "Blue"

http://xspc.biz/res250.php

http://img225.imageshack.us/img225/3016/onefb5.th.jpg

(http://img225.imageshack.us/my.php?image=onefb5.jpg)http://img225.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

http://img366.imageshack.us/img366/4503/twomg5.th.jpg

(http://img366.imageshack.us/my.php?image=twomg5.jpg)http://img366.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

http://img366.imageshack.us/img366/5783/threefr9.th.jpg

(http://img366.imageshack.us/my.php?image=threefr9.jpg)http://img366.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

http://img232.imageshack.us/img232/2200/fuoruu0.jpg

http://img371.imageshack.us/img371/9324/fiveen2.jpg

http://img135.imageshack.us/img135/4615/sixmm1.jpg

http://img389.imageshack.us/img389/8318/sevenvc2.jpg

[DonT-FeaR]

very cool... glad this project is back... keep working :)

[The boy 4rm oz]

Nice reservoirs, they look great.

[ulysses.cazuquel]

very cool... glad this project is back... keep working :)

Thanks DonT-FeaR and The boy 4rm oz,
My radiator will be also black

I today mount my system of watercooler
I set today my system Watercooler because I need to decide where is which will be the Pump


http://img204.imageshack.us/img204/6690/oneht1.jpg

http://img134.imageshack.us/img134/2580/twocq5.jpg

[Acey]

freakin cool front panel mate... *thumbs* but what are the 5 switches for?

[DonT-FeaR]

very cool... keep it up man.

[The boy 4rm oz]

Get a DDC3 pump with an acrylic top, will go perfectly with your mod.
Laind DDC 3.2:
http://www.gammods.com.au/store/index.php?main_page=product_info&cPath=1_88&products_id=399
DDC Pump Top:
http://www.gammods.com.au/store/index.php?main_page=product_info&cPath=1_88&products_id=515

[DonT-FeaR]

yeah true dat ... they are decent pumps to according to pope..

very cool looking to :)

[The boy 4rm oz]

The best in the business IMO, small and powerful.

[ulysses.cazuquel]

freakin cool front panel mate... *thumbs* but what are the 5 switches for?

Thanks Acey,
for fans of the system by watercooler

The boy 4rm oz
Re: Project: Silver Dragon
Get a DDC3 pump with an acrylic top, will go perfectly with your mod.
Laind DDC 3.2:
http://www.gammods.com.au/store/inde...roducts_id=399
DDC Pump Top:
http://www.gammods.com.au/store/inde...roducts_id=515

I will use Laing DDC-3.2 of Laing
But the idea of acrylic top is very good
Thanks my great friend

DonT-FeaR
Re: Project: Silver Dragon
yeah true dat ... they are decent pumps to according to pope..

very cool looking to :)

Thanks DonT-FeaR
All system will have quality products for the best result possible


http://img120.imageshack.us/img120/7232/pict2380yc1.jpg

[The boy 4rm oz]

I have that same radiator, it cools very well.

[DonT-FeaR]

thats a big radiator...

[ulysses.cazuquel]

I have that same radiator, it cools very well.

Thanks my friends The boy 4rm oz and DonT-FeaR,

But some friends said that I will have problem of effect Galvanic corrosion because of the mixed-metal of anodised aluminium and copper

Here is the Radgrill made by my friend Shinji of the Hardmodding.cl
I had a dream to have one radgrill using this drawing of my dragons
Only problem is the size of radgrill that it is a little bigger

http://img21.imageshack.us/img21/3154/pict2594hc3.jpg

[blueonblack]

The outstanding work continues! +rep

Yeah, The boy 4rm oz can tell you about galvanic corrosion. :)

(Sorry, tb4o, I couldn't resist...)

[The boy 4rm oz]

Yeah thanks blue lol.

As far as I know that radiator is all copper anyway, the only aluminium piece is the fan mounts. I am looking at it now and all the fins, inlet and outlet bays and cappileries appear to be copper. If the radiator really does have mixed metals in it then I have a bigger problem on my hands :(.

As for the rad grill, it looks amazing my friend. Very nice work.

[DonT-FeaR]

wow thats some nice work there... thats sweet top notch work

[ulysses.cazuquel]

Yeah thanks blue lol.

As far as I know that radiator is all copper anyway, the only aluminium piece is the fan mounts. I am looking at it now and all the fins, inlet and outlet bays and cappileries appear to be copper. If the radiator really does have mixed metals in it then I have a bigger problem on my hands :(.

As for the rad grill, it looks amazing my friend. Very nice work.

Thanks The boy 4rm oz, DonT-FeaR and blueonblack
I later change this reservoir for a reservoir made of acrylic
I will post here information about the Reservoir
XSPC 250mm
Passive Aluminium Reservoir
- 250mm Anodized Aluminium Tube
- 260ml Capacity
- Acrylic top and base
- 2x Chromed mounting brackets
- Removable Blue LED (4pin molex)
- G1/4" Thread
- Weight 700g
- Dimensions: 280x70x70mm


http://img212.imageshack.us/img212/6839/fundo3cp4.jpg (http://www.turbotintas.com/produtos.htm)

With great pleasure and satisfaction I will can use products of high quality in my project gentily provided by staff of
Turbo Tintas (http://www.turbotintas.com/contato.htm)

I will use a ink of Color Black super deep

But also use flakes (http://www.turbotintas.com/flakes.htm) blue and silver mixed to give a very pretty effect as final finishing

http://img13.imageshack.us/img13/4553/s5037515.th.jpg (http://img13.imageshack.us/my.php?image=s5037515.jpg)

[The boy 4rm oz]

That res is a much better option.

Sounds like you have got some nice paints there, I can't wait to see how it looks.

[ulysses.cazuquel]

Finally after a few years I'll finish the box that I made to put the Power Supply of my project.
Soon Pictures end and have also the story of this power supply XFX.

http://img340.imageshack.us/img340/3388/16671129.jpg

http://img209.imageshack.us/img209/1230/42041807.jpg

http://img207.imageshack.us/img207/4390/94802826.jpg

http://img251.imageshack.us/img251/3600/25584894.jpg

http://img87.imageshack.us/img87/8070/35362889.jpg

http://img291.imageshack.us/img291/8391/71574040.jpg

[The boy 4rm oz]

I think it was well worth the wait. The box turned out fantastically, very nice work my friend.

[billygoat333]

*drool*

[ulysses.cazuquel]

I think it was well worth the wait. The box turned out fantastically, very nice work my friend.

Thanks my friend.
I have some details to make in the box that I will try to finish next week.


*drool*

Thanks billygoat333

I remake all finishing of my side panel removing all paint, after making finish again using sandpaper disc and sandpaper tube with the my dremel and finishing with sandpaper number 180

http://img340.imageshack.us/img340/9995/sam0066v.jpg

http://img819.imageshack.us/img819/6791/47376983.jpg

http://img291.imageshack.us/img291/4818/37618852.jpg

[msmrx57]

OOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Looking good. :up:

[ulysses.cazuquel]

OOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Looking good. :up:

thanks msmrx57

Here is a photo of as will be my project mounted only missing the front
In the front of my project Silver Black Dragon I will use a 7-inch LCD Module that arrived yesterday on my hands from my sponsor

http://img228.imageshack.us/img228/3243/sam0292l.jpg

http://img594.imageshack.us/img594/421/sam0353.th.jpg (http://img594.imageshack.us/i/sam0353.jpg/)

[billygoat333]

that is seriously a freaking work of art. well done man... well done.

[ulysses.cazuquel]

that is seriously a freaking work of art. well done man... well done.

Thanks billygoat333

To make the best modifications possible for my project I decided to associate my changes with great products and great brands and with great pleasure and satisfaction that I get along with Easy Colors (http://www.easycolors.com.br/contato.html) have the product Cromo 11 (http://www.easycolors.com.br/metalicas.html) of highest quality.

What I report on Chrome 11 (http://www.easycolors.com.br/metalicas.html) after I used is that its effect is very fantastic.

The application of Video Demonstration Chrome 11 (http://www.easycolors.com.br/cromo.wmv) is very easy but I made some errors and not get 100% of the effect then I'll re-paint the pieces with Video Demonstration Chrome 11 (http://www.easycolors.com.br/cromo.wmv)

Here a Video Demonstration Chrome 11 (http://www.easycolors.com.br/cromo.wmv)

http://img256.imageshack.us/img256/644/sam0435v.th.jpg (http://img256.imageshack.us/i/sam0435v.jpg/)

http://img253.imageshack.us/img253/3109/123un.jpg

[ulysses.cazuquel]

Is being a lot of work to finish the front of my project that I am building.

Today I mount the front from my case to see if it needed some adjustments.

Lack some details as the front of the CrystalFontz USB LCD CFA635

http://img827.imageshack.us/img827/8103/sam0767h.jpg

http://img402.imageshack.us/img402/5509/sam0741.jpg

[The boy 4rm oz]

Looks fantastic mate. Well done. +rep

[Munty]

VERY nice, can't go wrong with silver and black and you picked a perfect template for the dragons! Looks beautiful, well done!

[ulysses.cazuquel]

Looks fantastic mate. Well done. +rep

Hi my Friend The boy 4rm oz
How are you?
I am Fine!
I am also very happy with the modifications :banana:



VERY nice, can't go wrong with silver and black and you picked a perfect template for the dragons! Looks beautiful, well done!

Thanks Munty
The effect is really very good

[The boy 4rm oz]

I am very well thanks Ulysses. I'm glad to see your still doing fantastic work :D.

[ulysses.cazuquel]

http://img163.imageshack.us/img163/1904/gigabytelogo.gif (http://br.gigabyte.com/)

With pleasure and pride announce the great cooperation from my New Sponsor Gigabyte for my project that sent me the motherboard GIGABYTE GA-890FXA-UD5 AM3 AMD 890FX + SB850 Chipset
Thanks to Gigabyte Brazil

GIGABYTE GA-890FXA-UD5 (http://br.gigabyte.com/products/product-page.aspx?pid=3519)


Review LegitReviews.com (http://www.legitreviews.com/article/1393/1/)

Review HardwareMX.com (http://www.hardwaremx.com/index.php/Placas-Base-para-AMD/Tarjeta-Madre-Gigabyte-890FXA-UD5.html)

Review thebestcasescenario.com (http://thebestcasescenario.com/?q=Gigabyte+GA-890FXA-UD5+Review)


http://img812.imageshack.us/img812/5969/81840262.th.jpg (http://img812.imageshack.us/i/81840262.jpg/)

http://img690.imageshack.us/img690/9934/49311726.th.jpg (http://img690.imageshack.us/i/49311726.jpg/)

http://img201.imageshack.us/img201/5903/17853156.th.jpg (http://img201.imageshack.us/i/17853156.jpg/)

http://img89.imageshack.us/img89/9730/71998679.th.jpg (http://img89.imageshack.us/i/71998679.jpg/)

http://img137.imageshack.us/img137/6315/78179150.jpg

[The boy 4rm oz]

That's a nice motherboard, congrats mate :D.

[ulysses.cazuquel]

That's a nice motherboard, congrats mate :D.

Thanks my friend The boy 4rm oz
The motherboard is very beautiful

More some pictures of different angles to analyze the details of the project
I'll disassemble the project again before finalizing
The system Watercooler will be with other products

http://img691.imageshack.us/img691/3133/47474664.jpg

http://img716.imageshack.us/img716/1645/10466983.jpg

http://img821.imageshack.us/img821/1768/16351411.jpg

http://img831.imageshack.us/img831/3949/38176761.jpg

[ulysses.cazuquel]

http://www.aquatuning.de/bilder/banner/468x60_eng.gif (http://www.aquatuning.co.uk/)

I'm very happy to announce my new sponsor for Products WaterCooler by Aquatuning
Now I'll have two radiators Phobya G-Changer 280 of extremely high quality in my system WaterCooler


http://www.aquatuning.de/images/product_images/600x400/9269_1.jpg (http://www.aquatuning.co.uk/product_info.php/info/p9269_Phobya-G-Changer-280.html)

Review 1 (http://66.163.168.225/babelfish/translate_url_content?.intl=us&lp=de_en&trurl=http%3a%2f%2f67.90.82.13%2fforums%2fshowpost .php%3fs%3da08efe12ef87782f1e434cbea0990020%26p%3d 4307651%26postcount%3d43)

Review 2 (http://translate.google.com.br/translate?hl=pt-BR&sl=de&tl=en&u=http%3A%2F%2Fwww.pcmasters.de%2Fhardware%2Frevie w%2F280er-radiatoren-im-test%2F8.html)


http://www.aquatuning.de/bilder/banner/phobya_468x60.gif (http://www.aquatuning.co.uk/)

[ulysses.cazuquel]

http://www.dangerden.com/images/ddlogo.png (http://www.dangerden.com/store/)

Again I'll have to the great contribution of my main sponsor Danger Den for have a system of Watercooler with products of the highest quality and performance

I already had some products shipped by Danger Den and decide to make a update for add the same system of Watercooler in my current project

My thanks also to the collaboration of (UN)Designs for my project


http://img850.imageshack.us/img850/9805/sam1463.jpg

http://img850.imageshack.us/img850/1363/sam1476.jpg

http://img846.imageshack.us/img846/4052/sam1497.jpg

http://img850.imageshack.us/img850/7200/sam1518.jpg

New Products

DD-6870 Water Block (http://www.dangerden.com/store/dd-6870-water-block.html)
Clear DD-TFC Tubing 3/8 Inch ID Tubing (http://www.dangerden.com/store/clear-dd-tfc-tubing.html)
Coolant UV GREEN (http://www.dangerden.com/store/feser-one-uv-green-f1-coolant.html)
X Bracket Vertical SSD Mount - Black (UN)Designs (http://www.dangerden.com/store/x-bracket-vertical-ssd-mount-black-un-designs.html)
Infinite Horizontal Pump Mount - Black (UN)Designs (http://www.dangerden.com/store/infinite-horizontal_pump-mount-black-un-designs.html)

Old products

MC-TDX 775 Brass universal Top High Flow (http://www.dangerden.com/store/mc-tdx-for-intel-775-cpu-boards.html)
1 CHP-311 MPC-Universal Chipset Block (http://www.dangerden.com/store/mpc-universal-chipset-block.html)
1 PUM-A100 DDC Acrylic Pump Top (http://www.dangerden.com/store/ddc-acrylic_pump-top.html)
DDC 12v Pump (http://www.dangerden.com/store/dd-laing-ddc-12v-18-watt-version-3.2.html)

Review

Danger Den MC-TDX Multi-core CPU Block Review martinsliquidlab Review (http://martinsliquidlab.i4memory.com/DangerDen-MC-TDX.html)
Danger Den MC-TDX Waterblock techpowerup Review (http://www.techpowerup.com/reviews/DangerDen/MC-TDX/6.html)
Danger Den MC-TDX Waterblock ocmodshop Review (http://www.ocmodshop.com/ocmodshop.aspx?a=1051)
Danger Den MC-TDX Waterblock virtual-hideout Review (http://www.virtual-hideout.net/reviews/DangerDen_M5_MC-TDX_Waterblocks/index3.shtml)
Danger Den MPC-Universal Chipset Block Review martinsliquidlab Review (http://martinsliquidlab.i4memory.com/DangerDen-MPC-Universal.html)


http://img858.imageshack.us/img858/5212/unlogo.jpg (http://www.undesignsbrackets.com/)

[ulysses.cazuquel]

Here is the last piece made​for my project

http://img855.imageshack.us/img855/1922/sam1761.jpg

http://img863.imageshack.us/img863/1791/sam1773.jpg

[ulysses.cazuquel]

Coming Soon!
http://img853.imageshack.us/img853/3289/sam1551.jpg

[ulysses.cazuquel]

Finally finished to paint the last piece on my project after of adding the front of the display.
I liked it very much.

http://img852.imageshack.us/img852/4140/sam1814x.th.jpg (http://img852.imageshack.us/i/sam1814x.jpg/)

[ulysses.cazuquel]

Result of the display in front of my project, it was very good.
http://img8.imageshack.us/img8/1916/sam1910.jpg

[ulysses.cazuquel]

I'm waiting arrive Two XFX Radeon HD 6870 and also the latest products Aquatunning to my system from WaterCooler
Here are pictures of my Case to the finished structure more in need of a cleaning

http://img101.imageshack.us/img101/9070/sam1937.jpg (http://img101.imageshack.us/i/sam1937.jpg/)

http://img62.imageshack.us/img62/5497/sam1954.jpg (http://img62.imageshack.us/i/sam1954.jpg/)

[The boy 4rm oz]

The assembled case looks fantastic my friend, I can't wait to see it all assembled.

[ulysses.cazuquel]

http://img853.imageshack.us/img853/2014/xfxlogo10.jpg (http://www.xfxforce.com/)

ReviewS testseek (http://www.testseek.com/computers/graphic_cards/pci-express/xfx_radeon_hd_6870_1gb_gddr5_pcie_hd-687a-znfc-p-b915c181-8174-3b55-21c4-6e15bff8239b.html)

http://img535.imageshack.us/img535/5134/dsc02867bj.th.jpg (http://img535.imageshack.us/i/dsc02867bj.jpg/)

http://img851.imageshack.us/img851/4269/dsc02880.th.jpg (http://img851.imageshack.us/i/dsc02880.jpg/)

http://img59.imageshack.us/img59/448/dsc02911r.th.jpg (http://img59.imageshack.us/i/dsc02911r.jpg/)

http://img717.imageshack.us/img717/1568/dsc02944v.jpg (http://img717.imageshack.us/i/dsc02944v.jpg/)

http://img819.imageshack.us/img819/5195/dsc02955n.jpg (http://img819.imageshack.us/i/dsc02955n.jpg/)

[ulysses.cazuquel]

The assembled case looks fantastic my friend, I can't wait to see it all assembled.

Thanks my friend!
I'm with a great problem in the Brazilian customs to release the products of Aquatunning but want to finish this project in a maximum of 2 weeks

http://img845.imageshack.us/img845/3856/dsc03132oe.jpg (http://img845.imageshack.us/i/dsc03132oe.jpg/)

http://img140.imageshack.us/img140/9900/dsc03141o.jpg (http://img140.imageshack.us/i/dsc03141o.jpg/)

[SXRguyinMA]

lookin good!

[ulysses.cazuquel]

http://www.aquatuning.de/bilder/banner/468x60_eng.gif (http://www.aquatuning.co.uk/)

Finally, my products Aquatunning was released by the Brazilian Customs.
Estimated time for final pictures of my project in the 10 days

Qty (2) G-Changer 280 (http://www.aquatuning.co.uk/product_info.php/info/p9269_G-Changer-280.html)
Phobya Balancer 250 silver nickel (http://www.aquatuning.co.uk/product_info.php/info/p11240_Balancer-250-silver-nickel.html)
Phobya Laing DDC top - silver nickel Edition Brass (http://www.aquatuning.co.uk/product_info.php/info/p9312_Laing-DDC-top----silver-nickel-Edition-Brass.html)
Phobya ZuperZero UV Yellow 1000ml (http://www.aquatuning.co.uk/product_info.php/info/p10653_ZuperZero-UV-Yellow-1000ml.html)
Phobya Molex Extractor Kit (Sleeving tool) (http://www.aquatuning.co.uk/product_info.php/info/p6628_Molex-Extractor-Kit--Sleeving-tool-.html)
Qty (3) Yate Loon D80SL-12+4UB UV Blue with blue LEDs with plug (2000rpm) ( 80x80x25mm ) (http://www.aquatuning.co.uk/product_info.php/info/p5167_Yate-Loon-D80SL-12-4UB-UV-Blue-with-blue-LEDs-with-plug--2000rpm----80x80x25mm--.html)
Qty (3) Yate Loon D12SL-124UB UV-Blue with blue LEDs & plug (1350rpm) ( 120x120x25mm ) (http://www.aquatuning.co.uk/product_info.php/info/p4137_Yate-Loon-D12SL-124UB-UV-Blue-with-blue-LEDs---plug--1350rpm----120x120x25mm--.html)
Qty (6) Yate Loon D14SL-124UB UV-Blue with blue LEDs & plug (1000rpm) ( 140x140x25mm ) (http://www.aquatuning.co.uk/product_info.php/info/p4144_Yate-Loon-D14SL-124UB-UV-Blue-with-blue-LEDs---plug--1000rpm----140x140x25mm--.html)

Review 1 (http://66.163.168.225/babelfish/translate_url_content?.intl=us&lp=de_en&trurl=http%3a%2f%2f67.90.82.13%2fforums%2fshowpost .php%3fs%3da08efe12ef87782f1e434cbea0990020%26p%3d 4307651%26postcount%3d43)
Review 2 (http://translate.google.com.br/translate?hl=pt-BR&sl=de&tl=en&u=http%3A%2F%2Fwww.pcmasters.de%2Fhardware%2Frevie w%2F280er-radiatoren-im-test%2F8.html)

http://img821.imageshack.us/img821/1959/45807520.th.jpg (http://img821.imageshack.us/i/45807520.jpg/)

http://img405.imageshack.us/img405/3171/28377933.th.jpg (http://img405.imageshack.us/i/28377933.jpg/)

http://img64.imageshack.us/img64/6650/14564672.th.jpg (http://img64.imageshack.us/i/14564672.jpg/)

http://img9.imageshack.us/img9/4755/83342476.th.jpg (http://img9.imageshack.us/i/83342476.jpg/)


http://www.aquatuning.de/bilder/banner/phobya_468x60.gif (http://www.aquatuning.co.uk/)

[Fuganater]

Glad to see this coming together. I've been watching this since 07 and it is truly a beautiful mod.

[ulysses.cazuquel]

lookin good!

Thanks SXRguyinMA


Glad to see this coming together. I've been watching this since 07 and it is truly a beautiful mod.

Thanks Fuganater
Now I'll finish!
Now a picture of today with the dual radiator Phobya G-Changer 280
What is the opinion of you?

http://img580.imageshack.us/img580/6627/sam2090m.jpg

[diluzio91]

that looks like you need some extra support on there. i also wonder how effective it will be with just 2 fans. btw. BEAUTIFUL mod...

[Fuganater]

I agree with diluzio. You need more fans on the rad.

[ulysses.cazuquel]

that looks like you need some extra support on there. i also wonder how effective it will be with just 2 fans. btw. BEAUTIFUL mod...


I agree with diluzio. You need more fans on the rad.


Thanks diluzio91 and Fuganater!

I will use 4 great fan coolers Yate Loon
I created a adaptation for my UV green acrylic shroud and the result is very good.
With these adaptation, I can put my radiator in any position that is very important for my project.
Also today I created a adaptation to keep the radiators in vertically perfectly aligned with the back of the case and I will use when I mount my project

http://img820.imageshack.us/img820/4062/35918283.jpg

http://img856.imageshack.us/img856/4612/38901464.jpg

[ulysses.cazuquel]

This my project not was made ​​to use a system WaterCooler, then any accessory to adapt my system Watercooler is very difficult
In Box that I did to power supply not have space for my radiators
The news today is that I painted my Water Block GPU of black
It's pretty good because now has the contrast Water Block GPU of black with the chrome Bitspower Compression Fitting and the Phobya ZuperZero UV Yellow
Anyone have pictures of other blocks painted in the internally part ??

http://img197.imageshack.us/img197/9842/sam2254.jpg

[ulysses.cazuquel]

http://img9.imageshack.us/img9/3530/1228929085593.png (http://www.bitspower.com.tw/)

link video

http://youtu.be/OR0oErO0PtI?hd=1

<object width="640" height="390"><param name="movie" value="http://www.youtube.com/v/OR0oErO0PtI&hl=en_US&feature=player_embedded&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="http://www.youtube.com/v/OR0oErO0PtI&hl=en_US&feature=player_embedded&version=3" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="640" height="390"></embed></object>

http://img847.imageshack.us/img847/3551/foto1xc.jpg (http://imageshack.us/photo/my-images/847/foto1xc.jpg/)

http://img684.imageshack.us/img684/4016/foto2ceh.jpg (http://imageshack.us/photo/my-images/684/foto2ceh.jpg/)

http://img851.imageshack.us/img851/3174/foto5qj.jpg (http://imageshack.us/photo/my-images/851/foto5qj.jpg/)

http://img841.imageshack.us/img841/9012/foto11c.jpg (http://imageshack.us/photo/my-images/841/foto11c.jpg/)

[ulysses.cazuquel]

Tomorrow I'll post another video of my project
More Two pictures from today

http://img542.imageshack.us/img542/1585/72472055.jpg

http://img846.imageshack.us/img846/7076/64509058.jpg

[ulysses.cazuquel]

I am a great Modder more a bad Cameraman

<object width="640" height="390"><param name="movie" value="http://www.youtube.com/v/OR0oErO0PtI&hl=en_US&feature=player_embedded&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="http://www.youtube.com/v/OR0oErO0PtI&hl=en_US&feature=player_embedded&version=3" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="640" height="390"></embed></object>

[ulysses.cazuquel]

More some photos of my project.
I'm analyzing to change some few details of the front of my project


http://img651.imageshack.us/img651/9485/81774339.th.jpg
(http://imageshack.us/photo/my-images/651/81774339.jpg/)
http://img585.imageshack.us/img585/1470/56958154.th.jpg
(http://imageshack.us/photo/my-images/585/56958154.jpg/)
http://img26.imageshack.us/img26/8076/72652128.th.jpg
(http://imageshack.us/photo/my-images/26/72652128.jpg/)

[The boy 4rm oz]

That looks absolutely stunning my friend, phenominal work. +rep

[OvRiDe]

This just keeps evolving. Awesome work!

[ulysses.cazuquel]

That looks absolutely stunning my friend, phenominal work. +rep

Thanks my friend The boy 4rm oz.
There were many modifications in my project and now I'll have to unite all


This just keeps evolving. Awesome work!

Thanks OvRiDe
Final evolution of my work

[ulysses.cazuquel]

http://img215.imageshack.us/img215/9670/corsairlogo.jpg (http://www.corsair.com/)

With pleasure and satisfaction to advertise a great partnership with the Corsair, the largest and best manufacturer of Memory and SSD in the world market.

Corsair Dominator GT 8GB (2x 4GB) ultra-high performance kit for AMD and Intel Dual Channel Processors, 1866MHz, 9-10-9-27, 1.50V, with Intel XMP.

Corsair CMT8GX3M2A1866C9 Dominator GT Desktop Memory Kit is an 8GB (2x 4GB) ultra-high performance kit for AMD and Intel® Dual Channel Processors, 1866MHz, 9-10-9-27, 1.50V, with Intel XMP.
The Corsair CMT8GX3M2A1866C9 Dominator GT Desktop Memory Kit is the ultimate performance memory solution. Limited to only extremely high memory speeds, the CORSAIR DOMINATOR® GT only uses highly screened IC's to guarantee performance and over-clockability. Using ultra efficient Dual-path Heat Xchange (DHX) cooling technology.

Force Series™ 3 120GB SATA 3 6Gb/s Solid-State Hard Drive. SKU# CSSD-F120GB3-BK SN: 112400303 (http://www.corsair.com/ssd/force-series-3/force-series-3-120gb-sata-3-6gbps-solid-state-hard-drive.html)

vr-zone (http://vr-zone.com/articles/corsair-force-3-120gb-ssd-drive-review/13104.html)

tweaktown (http://www.tweaktown.com/reviews/4179/corsair_force_3_120gb_solid_state_drive_review/index.html)

kitguru (http://www.kitguru.net/components/ssd-drives/zardon/corsair-force-3-120gb-ssd-review/)

http://img810.imageshack.us/img810/2283/35428714.jpg

http://img220.imageshack.us/img220/3605/24266357.th.jpg (http://imageshack.us/photo/my-images/220/24266357.jpg/)

http://img28.imageshack.us/img28/4653/61452858.th.jpg (http://imageshack.us/photo/my-images/28/61452858.jpg/)

http://img829.imageshack.us/img829/4958/51316455.th.jpg (http://imageshack.us/photo/my-images/829/51316455.jpg/)

http://img16.imageshack.us/img16/9346/62669027.th.jpg (http://imageshack.us/photo/my-images/16/62669027.jpg/)

http://img3.imageshack.us/img3/9755/80269557.th.jpg (http://imageshack.us/photo/my-images/3/80269557.jpg/)

http://img853.imageshack.us/img853/2988/84943691.th.jpg (http://imageshack.us/photo/my-images/853/84943691.jpg/)

http://img535.imageshack.us/img535/502/96272001.th.jpg (http://imageshack.us/photo/my-images/535/96272001.jpg/)

[ulysses.cazuquel]

An question, Front controller Fan in Black or Silver?

http://img804.imageshack.us/img804/790/sam0741e.th.jpg (http://imageshack.us/photo/my-images/804/sam0741e.jpg/)

http://img23.imageshack.us/img23/1085/42608513.th.jpg (http://imageshack.us/photo/my-images/23/42608513.jpg/)

[msmrx57]

First of all this thing is AWESOME!!!! :banana: Great work and attention to detail. :up:
Second I like the fan controller in black personally.

[The boy 4rm oz]

I also think the black fan controller looks better. Makes you focus on the fantastic fan grill below it :D.

[ulysses.cazuquel]

The result of my WaterBlocks DangerDen with nickel are incredibly very well made, look like they were chrome.
I think the great secret was the finish before applying nickel as well as the quality of the product used.
I did not have to do the polishing because they are perfect.
Now lets go the pictures of WaterBlocks DangerDen as also of my system watercooler with the pump between the video cards.

http://img28.imageshack.us/img28/3359/26729747.jpg

http://img690.imageshack.us/img690/8816/53245736.jpg

http://img8.imageshack.us/img8/8558/48856676.jpg

http://img810.imageshack.us/img810/9904/17675721.jpg

http://img26.imageshack.us/img26/9641/54725164.jpg

http://img836.imageshack.us/img836/1580/32450693.jpg

http://img267.imageshack.us/img267/7357/35839947.jpg

http://img687.imageshack.us/img687/5736/31107529.jpg

[The boy 4rm oz]

Those nickel plated DangerDen blocks look fantastic my friend.

[ulysses.cazuquel]

First of all this thing is AWESOME!!!! :banana: Great work and attention to detail. :up:
Second I like the fan controller in black personally.

thanks msmrx57
the details that make a project is good or not
the fan controller in black is the best choice


I also think the black fan controller looks better. Makes you focus on the fantastic fan grill below it :D.


Those nickel plated DangerDen blocks look fantastic my friend.

thanks The boy 4rm oz
my great friend ,correct about focus on the my fantastic fan grill dragon
really the blocks that I sent nickel were very good
Photo here today

http://img534.imageshack.us/img534/8429/dsc01501qz.jpg

[ulysses.cazuquel]

The AMD sent me the Bulldozer processor FX-6200 and now I can finally finish my project Silver Dragon.
And after of talking to Bill Owen, I got excited to finish the project in 2 or 3 weeks.
First part of my project finished with the test box that I made for my power supply and almost everything to be perfect.
Do I need only to make new cables to the power supply

Link youtube
http://www.youtube.com/watch?v=XAPv_vHlwJw

http://img339.imageshack.us/img339/9738/dsc03772pq.jpg

http://img403.imageshack.us/img403/2434/dsc03776sj.jpg

http://img171.imageshack.us/img171/262/dsc03788mz.jpg

http://img341.imageshack.us/img341/4366/dsc03801h.jpg

http://img41.imageshack.us/img41/2663/dsc03810a.jpg

http://img52.imageshack.us/img52/2914/dsc03803kr.jpg

[The boy 4rm oz]

Always stunning work my friend, congrats on the new CPU as well, very ncie kit.

[ulysses.cazuquel]

Always stunning work my friend, congrats on the new CPU as well, very ncie kit.

Hi The boy 4rm oz

How are you?
I am fine!

Now I wait to finish my project :D

[The boy 4rm oz]

I am very well my friend, good to see you still working away. I haven't touched my Dremel in over 12 months :(.

[ulysses.cazuquel]

Finally finished my project and now only connect all cables

http://img18.imageshack.us/img18/300/dsc02025y.jpg

http://img707.imageshack.us/img707/4361/dsc02085g.jpg

[d_stilgar]

Wow. Looking good.

[Fuganater]

An insane amount of work went into this mod.

[ulysses.cazuquel]

Wow. Looking good.

Thanks d_stilgar


An insane amount of work went into this mod.

Thanks Fuganater
Really many modifications in only 1 project casemod
It can be good or bad

http://img33.imageshack.us/img33/1077/dsc02192lw.jpg

[The boy 4rm oz]

As always Ulysses, beautiful work. I can't wait for the final shots.

[ulysses.cazuquel]

As always Ulysses, beautiful work. I can't wait for the final shots.

Thanks The boy 4rm oz

Now some pictures of my system WaterCooler
The position of my reservoir was very good

http://img16.imageshack.us/img16/5059/dsc02256dd.jpg

My system watercooler mounted and tested. Perfect! :rock:

http://img827.imageshack.us/img827/4253/dsc02306f.jpg

[The boy 4rm oz]

Very tidy loop, looks very nice.

[ulysses.cazuquel]

Very tidy loop, looks very nice.

Thanks The boy 4rm oz!
I'll have to improve the ventilation system of my radiator for better perfomance

[ulysses.cazuquel]

A video without much quality of my finished project

Casemod Silver Dragon - YouTube (http://www.youtube.com/watch?v=_5b2YPELDf0)


https://www.youtube.com/watch?v=_5b2YPELDf0

Matrix Orbital GX/Typhoon

Casemod Silver Dragon - Matrix Orbital GX/Typhoon (http://www.youtube.com/watch?v=rd395OHDkT4)


https://www.youtube.com/watch?v=rd395OHDkT4

[ulysses.cazuquel]

Project Dragon City Sponsored By Corsair

I'M COMING BACK


https://www.youtube.com/watch?v=dNJrPc4ONbM

http://imagizer.imageshack.us/v2/640x480q90/673/PkbEYy.jpg (http://imageshack.com/f/ipPkbEYyj)

[OvRiDe]

Wow!

[ulysses.cazuquel]

http://i44.photobucket.com/albums/f30/Cazuquel/1_zps5szatmmr.png

http://i44.photobucket.com/albums/f30/Cazuquel/2_zpsjpwka56p.png

http://i44.photobucket.com/albums/f30/Cazuquel/3_zpsfcgsm99x.png

http://i44.photobucket.com/albums/f30/Cazuquel/4_zpsxvmflmrd.png

http://i44.photobucket.com/albums/f30/Cazuquel/5_zpsfdapnk5y.png

[Airbozo]

Nice!

Love the handle design.