Project: Hellcat

[prosser13]

Introduction

I've been on the forums for a while now, so most of you will know me - to those who don't know me or I don't know, hello and nice to meet you :) To be honest, I've been wanting to do a case mod for a while though; my first thoughts on when were about a year ago when I saw Crimson Sky's work on TheBestCaseScenario, and I spent a few weeks planning it all out (the idea was a test bed style display case, maybe a future mod?) but I never got round to work on it due to lack of funds. However, after reading the amateur worklogs on a number of forums (CPCFF and Overclock.net being the main two) and having a bit of encouragement from masters like Mashie and other people who have done their own mods, I've decided to embark on my first case mod adventure! So, thanks for reading and I hope there will be more pictures from here on in (I love the pictures too) :)

Mods that have inspired me

Thought I'd make a list (ever expanding).

Monolith - craigr1982 - CPCFF
Goby's TT Armor LCS Build - gobygoby - Overclock.net
Extreme - 3xtr3m3 - Overclock.net
RelatiV Mod - D3DAiMtwo
Skull's First Mod (Irridescent paint job) - Skull_fcuk - CPCFF
All of Cyberdruid's mods (and no, I'm not listing them) :roll: - Overclock.net
BGAIOC - CrazyModder - Overclock.net
All of Mashie's work logs - Mashie.org
High Roller - Stu King
All of TheModNation guy's mods (especially the Harley Davidson and Pink Floyd mods!) - The Mod Nation
T2's Spinner Case - THRASHER2 - The Mod Nation
Dream - 3lfk1ng - The Mod Nation

As I said, the list is ever expanding, so I'll add mods as I remember/see them :)

Plans

My plan is to mod a partially modded Chieftec Scorpio (see pics here (http://s5.photobucket.com/albums/y189/prosser13/Chieftec%20Scorpio/)) into a sleek, elegant but large case. I'm going to adapt and mod the existing fan mounts to take 120mm fans for the majority of the case, and a 140mm for the top of the case. My colour scheme will be red and chrome with a black interior and blue/UV lighting. I plan to relocate the hard drives above the PSU (don't forget its a full tower case) and completely replace the front with a aluminium sheet (I have plans for this, don't worry!) - I'm guessing replacing the front will be one of the hardest bits. The large shelf across the middle of the case will be removed and replacing with crossbracing, as I feels this gets in the way. Other mods include a top blowhole and window, a new side window, and a PSOne LCD :)

My planning thread can be found here: http://www.overclock.net/case-mods-general-discussion/176694-designs-my-mod-un-named.html

As I do each mod I'll post pics and detailed plans.

PC Specs

The components which will go inside the case are (as of the current time):

AMD Athlon 64 3700+ with Scythe Ninja (in the post, still waiting!)
DFI RDX200CF-DR
2GB G.Skill HZ PC4000 (2x1GB)
Sapphire X1900GT (again, if it ever turns up in the post, if not Leadtek 6600GT or a better card)
Tagan 480W PSU (lots of wires!)
Pioneer DVD burner
PSOne LCD
Zalman 5.25" fan controller (4 channels)
Creative Soundblaster Value! Live (can't get my onboard sound working)
3mm LEDs (blue and UV)
80GB Samsung Spinpoint and Seagate Barracuda 200GB (latter may be replaced with second 80GB for RAID0 or 1)

Painting

As I've seen in many mods, a good paint job can easily make a good mod great or, on the other hand, a good mod much worse. Because of this, before I even went anywhere with my mod I chose a colour - red. I love red :D Its not seen on too many cases (like blue), and goes well with black or silver, or even white. After a search on the Internet for different car paint colours and a trip to the local Halfords (an automotive shop which stocks lots of car paints) I picked up a 500ml spraycan of white primer and a 300ml spraycan of Peugeot Diablo Red Pearlescent Spray Paint. The lid of the paint can actually looks nothing like the paint (typical Halfords :roll: ) but after reading up on line I was pretty confident that it was the colour I wanted.

To test it, I sprayed the removeable back of an old CD-RW drive with a single coat, just to see what it looks like. Some pics:

Dim light:

http://i5.photobucket.com/albums/y189/prosser13/Painting/DSC01453.jpg

Brighter light:

http://i5.photobucket.com/albums/y189/prosser13/Painting/DSC01471-1.jpg

Medium light:

http://i5.photobucket.com/albums/y189/prosser13/Painting/DSC01458.jpg

I was blown away TBH :o Seriously, I'm really annoyed I can't pick up accurate colours - the paint is pearlescent and in bright light the pearls are nicely visible and glint, while the colour is a proper bright "red", and shiney, but not too red.

Larger pics can be found here: http://s5.photobucket.com/albums/y189/prosser13/Painting/

I plan on doing several coats of both the white primer and the red paint, along with a couple of coats of clear coat (the single coat scratches very easily, so I think this will be vital)

Lighting

After seeing the RelatiV Mod, I decided to definitely go for LED strips - instead of his method though, I plan to use two different colours - blue and UV, with the LEDs in groups of two. More info coming soon, but I've got the blue LED and resistors and they look sweet. I plan to switch between the two colours, and switch the lighting on and off, using two switches ;)

PSOne LCD

The PSOne LCD has already been modded and setup, so incorporating into my mod will simply involve a new bezel to put it on the front of the case (I'm surprised at how good the viewing angles actually are).

More to come, so keep an eye out!

[moOmL]

Sounds like a solid plan. I really like that red color. Keep us updated!

[Fear.Sin]

I look forwarding to watching Hellcat come to life. Sounds like you have put a lot of thought into it and I am sure that it will turn out great!

:bunny: <---- Don't know why...

[prosser13]

Sounds like a solid plan. I really like that red color. Keep us updated!

Cheers :) If I had a sentence to describe it, without the camera, I'd say its a sparkly, shiney candy apple style red ;) (But cheaper :D )


I look forwarding to watching Hellcat come to life. Sounds like you have put a lot of thought into it and I am sure that it will turn out great!

:bunny: <---- Don't know why...

I was actually planning this mod to be started in June, after my exams, but you know how things 'turn out' so I'm going to start now 8)

In response to bunny: :banana:

[prosser13]

Fan Grills - Primer

A while back I picked up 6 silver fan grills on eBay for £6 delivered - new as well :o I was well pleased ;)

A picture of the fan grill:

http://i5.photobucket.com/albums/y189/prosser13/overview.jpg

Full details can be found here:

http://www.kustompcs.co.uk/acatalog/info_2702.html

Anyway, I decided that, while the standard finish is nice, I wanted something to be a bit more unique ;) So, I decided to paint them :)

First of all, I taped up the whole mesh area (it took a while, but ah well)

http://i5.photobucket.com/albums/y189/prosser13/Painting/DSC01478.jpg

I then scuffed it lightly with 800-grit sandpaper, and sanded the whole thing down with some very fine, micron-rated paper (from my lapping kit
:rolleyes: )

I spray paint in the garden, as we've not got a workshop, and then take it up to the house to dry. However, moving it after the first coat:

http://i5.photobucket.com/albums/y189/prosser13/Painting/DSC01479.jpg

(Bottom left) Whoops! Nearly dropped it and touched it, pulling the paint off.

So I waited 15 minutes, sanded it down with a light micron, and did another coat:

http://i5.photobucket.com/albums/y189/prosser13/Painting/DSC01480.jpg

Its impossible to tell in that picture, but in the bottom left there were definite bumps. Heres a better pic, its hard to tell again that there was THAT much wrong but it was pretty obvious (thats the problem with white paint!):

http://i5.photobucket.com/albums/y189/prosser13/Painting/bumps.jpg

So, I waited another 15 minutes for the coat to dry, and whipped out the 800 grit sandpaper, and sanding right back down (sorry for the bad pic!)

http://i5.photobucket.com/albums/y189/prosser13/Painting/DSC01481.jpg

Finally, I sprayed a 3rd coat of primer on:

http://i5.photobucket.com/albums/y189/prosser13/Painting/DSC01484.jpg

Which finally I am happy with :)

Gotta wait 23 hours (been an hour since I did it) before I can sand it down lightly and start with the metallic red!

Thats all for now :)

[Fear.Sin]

So you had to paint the grill white before applying the red you have?

I am new to TBCS community although I have been reading worklogs for quite a while. So that means I will being asking some noob questions to get an idea of why you are doing some things 8) .

I have a good understanding of most of what is going on so don't get me wrong but everyone cannot be proficient in every area so..... :bunny: :bunny:

[moOmL]

The white paint was a primer coat. The primer will ensure that the red paint will look nice.

Nice start prosser. :up:

[XcOM]

So you had to paint the grill white before applying the red you have?
......... :bunny: :bunny:

Yea, standard procedure, always sand and prime anything you intend to paint, Priming just allows the paint to stick better and get a smoother finish. Also use a light primer for light colours and dark primer for dark colours, (Although you can use light primer for dark colours, its recommended to follow the rule)

Ask your n00bish questions, rem, we where all n00bs at one stage of our life, we only learn my asking questions,


(Oh and having accedents and slicing you finger in half. OUCH THAT HURT, stil got scar)

[Fear.Sin]

Okay so if I have it straight, a primer is just a base coat of paint that is applied to help the color you actually want to paint the object stick and stand out better.

For instance if I want to paint say a fan grill a light green then I would first sand and clean (I am guessing sanding is the cleaning process?) the grill. Apply a lighter coat as a primer such as the white Prosser is using then after the primer dries apply the coats of green I want for the grill color.

How many coats do you need for the primer stage? Do you have to match the number of primer coats with the actual color you intend on painting the grill?

[moOmL]

You are correct. Sanding something before you primer or paint it helps the paint stick better. After you sand it, you want to clean it so that you aren't painting over any particles left over from sanding.

Personally i use about 2 to 3 coats of primer, but i've had as many as 5 coats. You'll know when to stop applying coats once the entire surface looks smooth and equal.

No you don't HAVE to match coats, but generally (for me at least) I have about the same amount of primer coats as I do final coats.

[prosser13]

So you had to paint the grill white before applying the red you have?

Nope - any colour primer will do. Primer just gives a better surface for the paint :) I've got some red primer too, not sure whether to use white primer or red primer for the case (one of the side panel has had a bit of red primer test sprayed on it, but I could always remove that)


The white paint was a primer coat. The primer will ensure that the red paint will look nice.

Nice start prosser. :up:

Cheers, did some more work last night, pics coming soon ;)


Yea, standard procedure, always sand and prime anything you intend to paint, Priming just allows the paint to stick better and get a smoother finish. Also use a light primer for light colours and dark primer for dark colours, (Although you can use light primer for dark colours, its recommended to follow the rule)

I'm considering using white primer for the black and red primer for the red - cos I've already bought 500ml of white primer and I'm tight :D Can start sanding the fan grills down in about 2 hours :)


Okay so if I have it straight, a primer is just a base coat of paint that is applied to help the color you actually want to paint the object stick and stand out better.

For instance if I want to paint say a fan grill a light green then I would first sand and clean (I am guessing sanding is the cleaning process?) the grill. Apply a lighter coat as a primer such as the white Prosser is using then after the primer dries apply the coats of green I want for the grill color.

How many coats do you need for the primer stage? Do you have to match the number of primer coats with the actual color you intend on painting the grill?

What I did was:

Scuff with P800
Clean
Primer
Sand lightly with fine paper
Primer
Sand lightly with fine paper
(Primer
Sand lightly with fine paper) <-- optional :)

And what I'm going to do:

Sand lightly to get a nice, flat surface
Paint coat one
Sand lightly
Paint coat two
Sand lightly
Paint coat three
Clear coat
Clear coat
Polish :) (need some polish though)



You are correct. Sanding something before you primer or paint it helps the paint stick better. After you sand it, you want to clean it so that you aren't painting over any particles left over from sanding.

Personally i use about 2 to 3 coats of primer, but i've had as many as 5 coats. You'll know when to stop applying coats once the entire surface looks smooth and equal.

No you don't HAVE to match coats, but generally (for me at least) I have about the same amount of primer coats as I do final coats.

I primer until the surface looks nice and flat, and has no blemishes :) Sometimes you have to sand back, but what else can you do to get that perfect surface :?

[prosser13]

Sorry for the delay in the update - had quite a bit of work to do, loads more today though :( Ah well, two weeks holiday are worth a day and a half of solid work :rolleyes:

Unfourtunately, I won't get to even see the case itself for another two months :( The reason is, I have no workshop at home (you might have guessed seeing as I spray paint in the garden) so the only place I can work at is at my grandad's workshop, who lets me borrow his tools. With my exams coming up fast though (oral on the 2nd May,

Removing the hard drive cages

The Chieftec Scorpio comes with a total of 6 internal 3.5" bays, in the form of 2 removable hard drive cages containing 2 bays each. These slot under shelves at the front of the case; my annoyance with these are any number of hard drives will block the airflow into the case, and with so much space above the PSU I've decided to mount my hard drives up there.

I removed the hard drive cages to start, which just left the two shelves, which can be seen here at the front:

http://i5.photobucket.com/albums/y189/prosser13/Chieftec%20Scorpio/DSC01260.jpg

They were held in place by rivets - the rivets circled in red are the ones:

http://i5.photobucket.com/albums/y189/prosser13/Modding/rivetsharddrive.jpg

Sorry for the poor quality pic :p

So, out came the drill, and away the hard drives shelves went :)

http://i5.photobucket.com/albums/y189/prosser13/Modding/DSC00206.jpg

Unrestricted airflow for the 2 x 120mm fans which will go there! :D

Removing the center shelf

One thing which really annoyed me about the case was the fact its massive, but space in the bottom half is smaller than it could be as there is a massive shelf running across the middle of the case. Its the piece of metal with a large hole and two smaller holes here:

http://i5.photobucket.com/albums/y189/prosser13/Chieftec%20Scorpio/DSC01259.jpg

And as you can see from this picture, it extends right the way into the 5.25" bays:

http://i5.photobucket.com/albums/y189/prosser13/Chieftec%20Scorpio/DSC01258.jpg

Well, I say "extends". I should say "extended" :rolleyes: as out came the drill again, and away went the rivets:

http://i5.photobucket.com/albums/y189/prosser13/Modding/DSC00205.jpg

And a picture of the drilled out rivets:

http://i5.photobucket.com/albums/y189/prosser13/Modding/DSC00207.jpg

Drilling this out meant the metal making up the 5.25" bays had nothing to connect to at the bottom, so it was flimsy. I grabbed a few self tapping screws and screwed the cage at the top (to the top) and at the bottom (to the motherboard tray) and this sured up the motherboard tray as well as the cage. I didn't get any pics of it though, sorry :(

As you can see though, the case is a lot more spacious and, thanks to the screws, has retained its rigidity, so I'm a happier bunny now :)

Heres a picture from the back:

http://i5.photobucket.com/albums/y189/prosser13/Modding/DSC00208.jpg

I used screws and nuts to hold on the top, in the end it will be pop riveted but I need to be able to remove it to spray it and to fit the acrylic window and blowhole so I don't want to use them yet. You can also see the large amount of space which wasn't there before in the middle of the case.

IIRC though, I took this picture to show the large hole at the back of the case. I've measured up a replacement panel for this but couldn't find any metal cutting jigsaw blades - I think my grandad will pick some up and cut the sheet out for me though.

What I did and didn't get pictures of

I thought I'd finished what I could do so I took the camera down - when I'd put it away though, I realised there was more to do.

First thing I did was get rid of this nasty hole:

http://i5.photobucket.com/albums/y189/prosser13/Chieftec%20Scorpio/DSC01264.jpg

I hammered it out on an anvil to make it flat, then used a circular file to even out the edges, and I also cleaned up around the hole with a flat file. I'm probably going to put my CMOS switch in that hole, so I don't need to block it up :)

Next, I removed the wrecked handle:

http://i5.photobucket.com/albums/y189/prosser13/Chieftec%20Scorpio/DSC01267.jpg

I don't have a clue what happened, but the whole of that panel had the same, bumpy texture - I would imagine the sanding went wrong or the wrong type of paint was used, something like that. I unscrewed the handle, removed it, and tried some paint thinner on it - while it got rid of all the blue paint, it still had the same bumpy texture, so I'm going to get rid of the handle and replace it with a simple catch or something. Luckily, I'd already planned to take it out so I dont need to worry about filling in the little holes left by it.

With the handle off, I whipped out the trusty orbital sander, put on some P120 paper, and sanded down the left side panel. The bumpy texture disappeared right away, so I've now got a nice smooth left side panel :) I used the sander on the right side panel too, and got rid of the clear coat finish and sanded that down too. I didn't do the top - the screw holes have some jagged edges sticking up and I don't see the point in filing them down when I'm going to be cutting them out anyway - and I finished the side panels by hand-sanding the edges down with some more P120 :)

I also found an old fridge being thrown out by next door, which has a front door made from what looks like mild steel - if it is, and is the right size, it will be perfect for the front panel, so my grandad will have a look at that for me and see if he can remove the door ;)

I think thats all the work I did (I only had an evening :( ), but fan grill updates coming soon :)

[prosser13]

Fan Grills - Painting

Hmmm, with just update I think I need a 56kb warning :cool:

So, I left my fan grills last time with the primer drying. We shall now follow the progress of each of the three ;)

And outside to show the different light:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill1outside.jpg

Fan Grill 1 - Red with Mesh Masked Off

Coat 1 drying:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill1coat1.jpg

20 minutes later I sprayed on a second coat:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill1coat2wet.jpg

And the second coat dry:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill1coat2.jpg

It looks good enough, so I didn't feel the need for a third coat :)


Fan Grill 1 - Black with Mesh Masked Off

The black spraypaint:

http://i5.photobucket.com/albums/y189/prosser13/Painting/blackspraypaint.jpg

From my old Warhammer days :cool: :rolleyes:

Coat 1, sorry for the dodgy light:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill3coat1.jpg

Coat 2, wet:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill3coat2wet.jpg

Coat 2, dry:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill3coat2.jpg

I wasn't happy still, so I added a third coat:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill3coat3.jpg

And the third coat dry outside;

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill3coat2outside.jpg


Fan Grill 3 - Red with red mesh

A forgot to get a picture of coat one :o but it looked just like coat two :rolleyes:

Coat 2, wet:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill2coat2wet.jpg

Coat 2, dry:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill2coat2.jpg

[prosser13]

Coat 2, dry and outside:

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill2outside.jpg

Lineup

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrillsoverview.jpg

And the problems start

I was very impressed, up to this point. I let them dry for a good half a day, then decided to take the tape covering the mesh off. I knew there was a very fine line between this working and not working, and I hoped I was dead on.

Turns out I wasn't :(

Grill 1:

http://i5.photobucket.com/albums/y189/prosser13/Painting/paintingproblems.jpg

Grill 3:

http://i5.photobucket.com/albums/y189/prosser13/Painting/morepaintproblems.jpg

What had happened on Grill 1 was the tape had simply been not precise enough - it didn't go exactly along the edges. The problem with Grill 2 was that it looks like in two or three places the primer had stuck in "flakes" to the tape - when the tape was removed the primer, and all the coats on top, were ripped off. Grill 1 could be saved, but Grill 2 was wrecked :(

Adapting Grill 1

Out came the spray can again, and Grill 1 was resprayed.

http://i5.photobucket.com/albums/y189/prosser13/Painting/fangrill1coat3meshtoo.jpg

No problems there this time, but to be honest I'm not too keen on the red mesh :(

Whats to come?

Well, this afternoon (5 hours or so) I'm going to clear laquer both Grill 1 and Grill 3 to finish them off :)

Grill 1 will then become my testing grill :D I need to get a picture to show this, but where the rounded corners are theres metal on the back as well - what I'm going to do is cut out the mesh around the edges, then get some new stuff (need to buy some anyway), silver probably, and add it to the grill by sticking it in the rounded corners :) I'll get some pictures and a large, sharp knife and show you what I mean ;)

More to come soon :) Comments welcome, as always!

[jdbnsn]

They look nice, I think a red mesh might look better with a black frame though. Contrast is good, but then again I don't see the big picture yet so it's tough to guess what would look best. Good progress though, keep it coming.

[prosser13]

I've been told that a red frame and black mesh would look good, but not vice versa until you :p

The idea is to blend the fan grills into the side panels (take a look at my designs), while having silver mesh will fit in with the chrome style faceplates - just looking for something to blend the side panels with the front and make them seem related, other than the red :)

[prosser13]

Haven't forgotten about this, don't worry :p

Currently doing exams, will be spending much more time on this afterwards and I now have some income so I can afford to mod ;)

Next purchase will be these fans;

http://www.watercoolinguk.co.uk/catalog/product_info.php?cPath=41_68&products_id=454

Can't find a fan which can beat that CFM to dBA ratio at the same price, and I like the red ;)

Couple of design changes - hard drives are going to move to the bottom 2/3 5.25" bays and have an extra fan in front of them, meaning a solid vertical column of 3 x 120mm at the front, then I'll have a back 120mm for exhaust, top 140mm and a 140mm in my PSU :)

[simon275]

Lol nice work. I have a can of chaos black and camo green in my cupboard and and whole lot of those little paint pots;.

I also have the exact same fan grills on my case. They need constant attention. It may appear they are clean but when you run your finger across them you find that they are covered in dust.

[prosser13]

Woohoo, an update!

Did some work before I go away for two weeks on temporary work, but at least I did something. Didn't all go well, I forgot something :(

Measure twice, cut once!

Anyway, you'll see what I mean soon.

So here we go, pics galore!

First thing to do was expand the hole on top, took it as close to the front as I dared - its still gotta hook over the front. Braced the back after cutting so I could file it without it bending. Need to pick up some U-channel...

http://i5.photobucket.com/albums/y189/prosser13/DSC00095.jpg

After measuring I also worked out I might as well mount a 120mm fan with a UV RadGrillz (the AcRyan one) on top, I think that'll look pretty good.

I then put in the acrylic, cut the acrylic to size, and put in four temporary bolts:

http://i5.photobucket.com/albums/y189/prosser13/DSC00096.jpg

They will be replaced by M4 allen headed bolts when I get a chance. And from the inside:

http://i5.photobucket.com/albums/y189/prosser13/DSC00097.jpg

Came across a *slight* problem when trying to fit it. Theres a little bit sticking out the top of the 5.25" bay cages which stops the acrylic being able to fit :( So I took a 4" grinder to it to see what would happen and it looks like it should grind away pretty easy, so no problems there:

http://i5.photobucket.com/albums/y189/prosser13/DSC00102.jpg

http://i5.photobucket.com/albums/y189/prosser13/DSC00103.jpg

Onto the side window now. After measuring up and drawing out:

http://i5.photobucket.com/albums/y189/prosser13/DSC00089-1.jpg

Just a tip - NEVER try and cut with a 4" grinder, I had a go cos the sparks amused me (great reason or what) and it simply burnt through, even with a diamond tipped bladey thingy:

http://i5.photobucket.com/albums/y189/prosser13/DSC00092.jpg

The jigsaw, I found, was much easier, and I *think* this was after I filed it:

http://i5.photobucket.com/albums/y189/prosser13/DSC00091.jpg

Again going to take a look at U-channel to see what it looks like...

So, here was the problem. Poor measuring by me means:

http://i5.photobucket.com/albums/y189/prosser13/DSC00099.jpg

Slight gap :( And when I say *slight* I mean a good cm or two :( So, my plan is to get some mesh and have a mesh strip instead, as I can't afford to buy more acrylic...ah well...

The angle in the bottom right corner looks pretty good:

http://i5.photobucket.com/albums/y189/prosser13/DSC00100.jpg

BTW, the acrylic will be mounted on the inside, so the vent holes should look fine and not be obscured...

Window overview as if the case was on its side and the front was closest to you:

http://i5.photobucket.com/albums/y189/prosser13/DSC00098.jpg

Remember this hole?

http://i5.photobucket.com/albums/y189/prosser13/Modding/DSC00208-2.jpg

Cut this out to cover it. I still need to cut the PSU hole, might do something above that too but that'll come later:

http://i5.photobucket.com/albums/y189/prosser13/DSC00101.jpg

Loops over the top, and then the acrylic top part goes over it. Won't be too viewable and it can be filed and painted later :)

Next random stage was checking the back fans. Rather than a single 120mm, I'm going to go with dual 92mms - cut out some templates from plywood with a jigsaw and checked they would fit:

http://i5.photobucket.com/albums/y189/prosser13/DSC00094.jpg

Looking good ;)

Then onto the front fans. Cut out another template to go along with my Akasa Amber which I'm using to measure. These are 120mm fans ;)

http://i5.photobucket.com/albums/y189/prosser13/DSC00093.jpg

[prosser13]

Cut out the 80mm fan grills (shot is from later on in the day with some more work done, but you can see I've cut them out. Used a jigsaw and quickly filed them:

http://i5.photobucket.com/albums/y189/prosser13/DSC00105.jpg

Next I got a sheet of metal, cut it out to approx size, and bolted it over the holes left (thats the white thing you can see covering the fan holes on the inside in the picture above)

http://i5.photobucket.com/albums/y189/prosser13/DSC00104.jpg

What I'm then going to do is just cut the 120mm fan holes straight through that and drill holes through it. Going to get some better bolts, use more of them and thick rubber washers to stop it vibrating with the fans attached.

Well, thats it for now :) More to come soon, any questions just ask.

More info on the front panel BTW - need to measure up the front of the case and I'm getting a fibreglass panel custom cut to exactly the right size. I will then use 1cm or 2cm standoffs and long M4 bolts to mount it, 3 bolts down each side (top left, top right, middle left, middle right, bottom left, bottom right) and the standoffs will allow the light from inside to filter out from the sides and maybe the front fans :)

Currently looking at AcRyan UV fans for the top to light up the UV RadGrillz and then maybe something like Xilence Red Wings to help match in with the rest of the case.

Lots more to come :)