PDA

View Full Version : Toggle Switch



Sharpie555
05-04-2007, 10:01 PM
Has anyone ever tried to replace the power button on their pc with a switch like the one here: http://cgi.ebay.com/Sub-Min-DPDT-C-Off-Toggle-Switch-ON-OFF-ON-SM203_W0QQitemZ190108541655QQihZ009QQcategoryZ1164 4QQrdZ1QQcmdZViewItem

If so did it work, or would it be difficult?

jdbnsn
05-04-2007, 10:22 PM
It wouldn't be very difficult to replace the power button with such a switch, but that is not the correct type of switch for a PC power or reset. With that switch you have double pole double throw and they make a point to put in red bold type "does not spring back to center" (off position). For a PC power or reset button you need a momentary switch that will only close the circuit while you press it and then open the circuit when you release which that switch does not. If you leave the power switch in the on position, your PSU will power back off in 6 seconds.

Sharpie555
05-04-2007, 10:43 PM
Thanks for the help, would this switch work then?
http://cgi.ebay.com/SPDT-Toggle-Switch-Center-Off-Momentary-Both-Sides-K123_W0QQitemZ190109954101QQihZ009QQcategoryZ11644 QQrdZ1QQcmdZViewItem

jdbnsn
05-04-2007, 10:50 PM
Yes, that one would work.

intergalacticman
05-07-2007, 02:14 PM
yeah, actually i did, i was at ace, and i saw its potential for an industrial themed mod, and although the feature when windows does the all the "windows is shutting down" stuff doesnt work, it just shuts off the power

Eclecticos
05-07-2007, 02:42 PM
I was wondering the same thing. I have this switch. Anyone know if it will need a resistor or how to Hook it up?

http://img357.imageshack.us/img357/9968/switchoi7.jpg

Do you just run the regular wires to the mobo? And thats all?

Bucko
05-07-2007, 06:03 PM
Does that switch spring back to normal? Or when you flick it does it stay in the other position?

If it springs back and returns to normal it will be fine to use. Just hook up the the two wires that are going to you current power switch to it.

If the switch stays over when you flick it on rather than springing back, I wouldn't use it. If you hook it up it and turn it on, the switch will act the same as when you hold in the power switch on your PC. ie: It will shut itself back down.

Eclecticos
05-07-2007, 09:27 PM
Yea it just goes one way and the other. . I need the momentary kind then huh?

Aero
05-07-2007, 10:00 PM
yep.


Momentary switch = good

All else= Evil


I suppose you could disassemble the switch and place a small compression spring in there so it will just activate for a short amount of time and the deactivate well within 6 seconds.

intergalacticman
05-08-2007, 01:51 PM
i just ripped off the old button and soldered on the switch, but it is on an older p3 computer where the switch directly connects to the PSU. i dont know about newer psu's

Ichbin
05-08-2007, 02:13 PM
You can use those switches to turn on fans and lights and stuff though.

Ookazoo
05-11-2007, 11:25 PM
On the topic of switches . . .

With this arrangement of wires would I be able to turn on two cold cathodes with one switch? Or would it short or something?

http://www.lotechdesigns.com/host/images/2166Switch Diagram.JPG

Also, would the momentary switch used for http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=95&products_id=3651 be easily replaced? (look at the pictures)

Thanks

Redundant
05-12-2007, 02:22 PM
Ookazoo, here's the diagram to wire 2 cathodes to one switch.
http://img444.imageshack.us/img444/7307/cathodecircuitkq6.jpg
The blue tubes are the CCFLs and the I boxes are their inverters.

Ookazoo
05-12-2007, 02:37 PM
Thanks, that looks good.

Omega
05-12-2007, 03:52 PM
You can use non-momentary switches to turn on your computer. push it up, computer turns on, push it down, computer stays on. Just do that kind of quickly, and no worries.

.Maleficus.
05-12-2007, 04:48 PM
You can use non-momentary switches to turn on your computer. push it up, computer turns on, push it down, computer stays on. Just do that kind of quickly, and no worries.
You beat me... But yeah, that's what I was going to say. Whether or not you want to do that every time your computer starts is up to you, but it's better than nothing.

Omega
05-12-2007, 08:39 PM
You beat me... But yeah, that's what I was going to say. Whether or not you want to do that every time your computer starts is up to you, but it's better than nothing.

To turn on my computer is more complex than pushing a button, though.

I type in a 5-letter password then hit enter, then it turns on.

:banana:

Ookazoo
05-13-2007, 12:39 PM
how did you do that?

Redundant
05-13-2007, 04:55 PM
I type in a 5-letter password then hit enter, then it turns on.
Did you put a password on the BIOS?

intergalacticman
05-14-2007, 01:52 PM
wait how do you put it in the bios if it isnt on yet???

Omega
05-15-2007, 01:34 AM
BIOS option. "Power-on by keyboard", setting is "Password".

The button won't turn the computer on. People try that, and I laugh, then turn it on. =D

intergalacticman
05-16-2007, 01:18 PM
nice