Brunhold
03-06-2006, 07:18 AM
Hello folks!
1st) Nice Forum, full of good work and ideas!
2nd) Sorry for my bad english, I am from germany, hope you understand, what I want to tell you. If anyone finds spelling mistakes -> keep it!
3rd) I want to present my finished casemod, so let me read your opinion!
Casemod features:
- plasmaball with lift
- motorised door
- switchable colours
- neonlight (2 Tubes, 2 switchable colours: blue/red)
- running light in frontcover (10 LEDs, yellow)
- underbody illumination (20 LEDs, 2 switchable colours: yellow/green)
- "Eye" in frontcover (2 LEDs, 2 switchable colours: blue/red)
- atomsign over power supply unit(30 LEDs, 2 switchable colours: yellow/green)
- stylebox on the side (4 LEDs, 2 switchable colours: blue/red)
- DVD-Drive-Stealthmod
The hardware inside/outside:
CPU: AMD Athlon64 3500+, 2200MHz, S939, Winchester
Cooler: Thermaltake Silent Boost K8
Mainboard: Gigabyte GA-K8N Ultra-9
RAM: 2x MDT-DDR-RAM 1024MB, PC400, CL2.5
HDD: 2x 80GB Seagate ST380817AS 7200rpm, SATA, NCQ, Raid 0
Graphix: Gainward GeForce 6800GT, 256MB DDR3, PCIe
VGA-Cooler: Arctic Cooling NV Silencer 5 Rev 2
TV-Card: Terratec Cinergy 1400 DVB-T
PSU: Be Quiet! 350W ATX, PFC
Monitor: Samtron 98PDF, 19" CRT and Fujitsu Siemens Comp. 4612 FA, 18" TFT
Here are some pictures from the construction:
After the window, the door has been cut out. Next steps: Primer, sanding, primer, sanding, primer, sanding...
http://der-bruno.de/Brubcat/Bau/grundiert.jpg
I did not like the bottom plate, that is why I made this cover. It is made of a CD-ROM-Board, a busted TFT-Inverter and a network adapter.
http://der-bruno.de/Brubcat/Bau/Innenboden.jpg
The lift raises the plasmaball only 2,5 cm or 1 inch, but it is better than nothing.
http://der-bruno.de/Brubcat/Bau/Lift.jpg
The underbody illumination with switchable lights.
http://der-bruno.de/Brubcat/Bau/Unterboden.jpg
Here you can see old paint. The pipes and the box have no function, are not mounted yet. Everything is just decoration!
http://der-bruno.de/Brubcat/Bau/VersSeite.jpg
The mess has to get cramed inside.
http://der-bruno.de/Brubcat/Bau/Gesamt.jpg
1st) Nice Forum, full of good work and ideas!
2nd) Sorry for my bad english, I am from germany, hope you understand, what I want to tell you. If anyone finds spelling mistakes -> keep it!
3rd) I want to present my finished casemod, so let me read your opinion!
Casemod features:
- plasmaball with lift
- motorised door
- switchable colours
- neonlight (2 Tubes, 2 switchable colours: blue/red)
- running light in frontcover (10 LEDs, yellow)
- underbody illumination (20 LEDs, 2 switchable colours: yellow/green)
- "Eye" in frontcover (2 LEDs, 2 switchable colours: blue/red)
- atomsign over power supply unit(30 LEDs, 2 switchable colours: yellow/green)
- stylebox on the side (4 LEDs, 2 switchable colours: blue/red)
- DVD-Drive-Stealthmod
The hardware inside/outside:
CPU: AMD Athlon64 3500+, 2200MHz, S939, Winchester
Cooler: Thermaltake Silent Boost K8
Mainboard: Gigabyte GA-K8N Ultra-9
RAM: 2x MDT-DDR-RAM 1024MB, PC400, CL2.5
HDD: 2x 80GB Seagate ST380817AS 7200rpm, SATA, NCQ, Raid 0
Graphix: Gainward GeForce 6800GT, 256MB DDR3, PCIe
VGA-Cooler: Arctic Cooling NV Silencer 5 Rev 2
TV-Card: Terratec Cinergy 1400 DVB-T
PSU: Be Quiet! 350W ATX, PFC
Monitor: Samtron 98PDF, 19" CRT and Fujitsu Siemens Comp. 4612 FA, 18" TFT
Here are some pictures from the construction:
After the window, the door has been cut out. Next steps: Primer, sanding, primer, sanding, primer, sanding...
http://der-bruno.de/Brubcat/Bau/grundiert.jpg
I did not like the bottom plate, that is why I made this cover. It is made of a CD-ROM-Board, a busted TFT-Inverter and a network adapter.
http://der-bruno.de/Brubcat/Bau/Innenboden.jpg
The lift raises the plasmaball only 2,5 cm or 1 inch, but it is better than nothing.
http://der-bruno.de/Brubcat/Bau/Lift.jpg
The underbody illumination with switchable lights.
http://der-bruno.de/Brubcat/Bau/Unterboden.jpg
Here you can see old paint. The pipes and the box have no function, are not mounted yet. Everything is just decoration!
http://der-bruno.de/Brubcat/Bau/VersSeite.jpg
The mess has to get cramed inside.
http://der-bruno.de/Brubcat/Bau/Gesamt.jpg