View Full Version : Project ATM

07-19-2005, 03:09 PM
This is My first work log and it's going to be diffrent It's going to be backwards!
I'm starting with the finished Product and then walking it back. Partly because I've gotta find all the pics of the creation (as it was some 2yrs ago that we built this mod). The ATM Mod won the case mod contest at Million Man Lan 3 in Louievile Ky, June 2004. This Pic is Of me and John (worked for CorsAir at the time) as he was sponsoring the CaseMod prize 1Gig of Ram.


To check out my other mod Currently in Process See
LanOhio Casemod (http://forums.lanohio.com/index.php?showtopic=2275)
It may show up here in the future depending on the feedback

07-19-2005, 03:45 PM
Here the Specs at a glance:

AMD Athlon 2100XP+
1.5 GB CorsAir Ram
20Gb WD Boot Disk
80Gb Seagate Data Disk
Asus 64Mb Geforce 3 Vidcard
Soyo KT400 Dragon Mobo
A Smart card reader
USB 16 KeyPad
Compaq V500 15 SVGA Monitor
350Watt PSU

07-19-2005, 04:43 PM
This what we did to get the ATM from done (ok Useable) to DONE!

http://www.fccmonline.com/LanImages/ATM/Frontinsidebefore clean.jpg

The Front Insides After a Lan (and before we got it Ready for MML3)

The Back before we cleaned it up. Notice The Exposed Monitor !!

The Front Inside after we Cleaned up.

The Rear after cleaned and Neatned.

This is the back panel that fit when the orignal 13" VGA monitor was in there, but doesn't come close with the 15" shoe horned in there.

Now We Mod IT!

This Is Jim (Waaack) and his neighbor Who hopped in to give us a hand cutting the thick skin of the ATM.

The Back panel fits like a glove....We'll need to bend up a cover for the hole next.

Link to Original Thread (http://www.thebestcasescenario.com/forum/showthread.php?t=956)