PDA

View Full Version : g15 problems



taintedplay
05-26-2007, 02:37 AM
i recently got a g15 from a friend and the backlight and lcd screen keep flashing and going brighter and darker, nonstop, anyone know how to fix this? thanks, taintedplay

Wasabisam
05-26-2007, 11:33 AM
hmmm i have a G15 and thats never happened before. Have you got the newest drivers installed go to the logitech website and get them. umm other than that is it shorting out anywhere like on the cord or inside the actual keyboard. Sorry if thats no help.

:up: sam

Bucko
05-26-2007, 09:59 PM
Is it doing in a constant pattern, or does a mild tap or shake of the keyboard change it?

taintedplay
05-26-2007, 11:45 PM
i was pissed, so i threw it against a wall and now it works fine! i did that to fix my phone too, funny how that fixes most things

Bucko
05-27-2007, 12:08 AM
Throwing it at the wall sounds bad.

Installing drivers at high velocity sounds much better! :)

taintedplay
05-27-2007, 01:10 AM
all righjt, its back to messed up, got the best drivers, and wiating for tech support to respond. if it doesent work i might jsut open it up and take the led's out, or attach them to a battery.

Spawn-Inc
05-27-2007, 03:37 PM
well since no one has said anything i'm gonna go say it.
HAMMER TIME!!!!

taintedplay
05-27-2007, 03:43 PM
haha, yea if i have no warrenty (emailed to check) im guna wire the led's to a battery. Im just worried about the lcd ****ign up

Nagoshi
06-06-2007, 07:02 AM
haha, yea if i have no warrenty (emailed to check) im guna wire the led's to a battery. Im just worried about the lcd ****ign up

play with your wire from the keyboard to the USB/PS2 jack, to see if the wire isn't loose somewhere. And look in the G15 and see if there are no loose wires again.

Redundant
06-06-2007, 04:57 PM
play with your wire from the keyboard to the USB/PS2 jack, to see if the wire isn't loose somewhere. And look in the G15 and see if there are no loose wires again.
There's an easier way to do this:

-If you have a multimeter, use the continuity check
-If you don't, you can make a circuit with a 3v battery and an LED and test each wire to see if it lights up.