DD NV8 SLi or DD Maze 4 SLi?

[ack ack]

Danger Den NV8 SLi
http://www.frozencpu.com/ex-blc-186.html

Danger Den Maze 4 SLi
http://www.frozencpu.com/ex-blc-185.html

just curious if anyone has had any experience with either of these products. are the separate Maze 4 blocks better for cooling? would the NV8's flow cause a serious bottleneck? was also wondering about scaleable compatibility with the new nvidia 7800's. haven't come across any reviews, but please post any you find. thanks for any input.

[Mallus]

what motherboard do you have if you have a msi main board forget the nv8 it does not fit what the maze4 concerns they cool the gpu's of my 6800 GT sli setup to 46 c but the Ram cooling is a problem with those cards I dont know how it is with the 7800 but i think it will be the same

[Seven]

With regards to the NV68 block fitting on the 7800


There is a change to the 7800 series cards. The height difference of the RAM to the GPU has changed by about the diameter of a human hair (0.006 inches or 0.15mm). Danger Den will make a modifed block to officially work with the 7800 series. Also, there is RAM on the backside of the card. This requires a modifed backing plate and RAM sinks.

[ack ack]

my current mobo is a Asus A8N SLi Deluxe, but I only have a 6600GT in it at the moment.

I thought I read somewhere that the ram sinks for the NV8 were insufficient. Would there be any suggested brand of RHS to use? thanks for your replies.