Project ATM

[crazybillybob]

This is My first work log and it's going to be diffrent It's going to be backwards!
I'm starting with the finished Product and then walking it back. Partly because I've gotta find all the pics of the creation (as it was some 2yrs ago that we built this mod). The ATM Mod won the case mod contest at Million Man Lan 3 in Louievile Ky, June 2004. This Pic is Of me and John (worked for CorsAir at the time) as he was sponsoring the CaseMod prize 1Gig of Ram.

http://www.fccmonline.com/LanImages/ATM/WinningMML3.jpg



To check out my other mod Currently in Process See
LanOhio Casemod (http://forums.lanohio.com/index.php?showtopic=2275)
It may show up here in the future depending on the feedback

[crazybillybob]

Here the Specs at a glance:

AMD Athlon 2100XP+
1.5 GB CorsAir Ram
20Gb WD Boot Disk
80Gb Seagate Data Disk
Asus 64Mb Geforce 3 Vidcard
Soyo KT400 Dragon Mobo
A Smart card reader
USB 16 KeyPad
Compaq V500 15 SVGA Monitor
350Watt PSU

[FX]

Hey, welcome to the boards. We were wondering what happened to you guys, hadn't heard from any of you since.

I remember you telling us about this one at MML, looking forward to seeing more on it.

[crazybillybob]

This what we did to get the ATM from done (ok Useable) to DONE!

http://www.fccmonline.com/LanImages/ATM/Frontinsidebefore clean.jpg

The Front Insides After a Lan (and before we got it Ready for MML3)

http://www.fccmonline.com/LanImages/ATM/InsidePreclean.jpg
The Back before we cleaned it up. Notice The Exposed Monitor !!

http://www.fccmonline.com/LanImages/ATM/frontafterclean.jpg
The Front Inside after we Cleaned up.

http://www.fccmonline.com/LanImages/ATM/Backafterclean.jpg
The Rear after cleaned and Neatned.


http://www.fccmonline.com/LanImages/ATM/Backpanelprecut.jpg
This is the back panel that fit when the orignal 13" VGA monitor was in there, but doesn't come close with the 15" shoe horned in there.

Now We Mod IT!
http://www.fccmonline.com/LanImages/ATM/JimDougcutting.jpg

This Is Jim (Waaack) and his neighbor Who hopped in to give us a hand cutting the thick skin of the ATM.

http://www.fccmonline.com/LanImages/ATM/Backcutout.jpg
The Back panel fits like a glove....We'll need to bend up a cover for the hole next.

[crazybillybob]

Scarab,

Follow the Link in the first post here and there's a shot of my other server mod.
The major body peices are just sitting there but it gives you an Idea of whats going on. I'm a bit worried to post it here as I may step on other's toes (I'm new on this forum I don't want to upset to fast!)


and here's a link to the MML4 Parkinglot Fun! (http://www.fccmonline.com/images/mml4.avi)

It's Big 49Mb Just warning DU users!

[FX]

I wouldn't worry about anyone's toes billybob, that's what these forums are for....posting.

[crazybillybob]

For Everyone else. This is the quick shot I was talking about.
I'm going to go Over it in more detail in a diffrent WorkLog soon...We'll call this a seek peek, for those of you that are going to ask I started this project last September (2004) and hadn't heard of the other R2 Mod till I meet Scarab and Crimson Sky at MML4 (June 2005). Mine is going to a be R/C controlled gaming Server (I like Modding Servers there fun!), Specs TBD. Hope you like it, Remember It's not done and it's missing Alot of peices.

http://www.fccmonline.com/LanImages/R2/R2WIP01.jpg

[Aero]

looks cool. I like it. Good idea.

POST NUMBER 10,000 on the boards w00t!

[crazybillybob]

Well this work log has hit a road bump. I moved in January and I can't find the pics I took when we built ATM, and the ATM server lives 5+hours from me. So unless my buddies in Ohio can shoot me some pics; it will be a few weeks till I get there and take some more photos. On a side note I will probably start that other work log soon (I have those Pics!).


Thanks for dropping by, and keep leaving comments.
Crazybillybob

[montmorency]

niiiiice car.

[crazybillybob]

He's got a 1938 Hudson triplane sitting there now.....But the Cadi is right next to it! :D



(there Waaaack's!)