-
Dragzon Case
Hi,i just joined TBCS today would like to share my case project.
started in 2005
:blush: Juz planned to start a case project,as a hobby
Welcome To My Worklog Project!!
cut into half
Finally started this project:P
Took off everything from my old i cute case and transfered to a temporary [enlight]case
which im gonna use for the project also[i cute case]
Drilling Out The Rivets
All the sections are dismantled.
Just bought CM Centurion 5 from Gadget Zone :drool:
more updates after my final exam around november
:unsure:
The theme of this case will be in flames[still thinking] and custom fan grills etc more plans coming
-
Re: Project:Dragzon Case
went to hardware shop to get some wires,led,switch
decided to start the psu mod :thumbs:
opened the psu and cut off the stock fans
fixed blue led fan
fixed cm uv fan
screwing cm uv fan on the Sunbeam Psu Uv reactive Case
Double sided tape the sunbeam psu uv reactive case.
Finally Is Done!
note: the crack on the sunbeam psu case is not by me,someone else............... :w
PSU Under UV light
[img]http://img288.imageshack.us/img288/7750/96ov.jpg[/img
-
Re: Project:Dragzon Case
Time to cut a window :P
Halfway cutting through
Separating the cd rom bay and the fdd&hdd bay[not using]
Finally Done,and just riveting the bar for the cd rom bay
still need to file and sand paper tommorow continue,
:thumbs:
Another Update for today :drool:
cut it into half
Taking off the part that i dont need
Riveting it
Finally Done,needs a respray
the case gonna plan for future use water cooling
-
Re: Project:Dragzon Case
Took a pic of the case got nth to do :o
due to my rotary tool[unknown brand] died.
anyway since i cant do any cutting work :cry: ,so i decide to do this strip off some stuffs ,since 1 week break do some mods :flex:
gonna spray int[black]and see what i can do
Done A Little mod for today:D
fixed the rubber legs from cm5 so there is a space for the ccfl,took off the ccfl from the CM ccfl tube and transfer it to a Rubber Tube as shown in the pic
Testing wether the ccfl is smash i guess,juz fit nicely :thumbs:
thats all for today, need to get 3/8 barbs,5 Black Spray Cans,silicon,epoxy glue :o $$$ :sweat:
-
Re: Project:Dragzon Case
Did a little mod Drilled holes for rivets,testing the rivets wether they fit:P
:thumbs: :flex:
juz cut off the honeycombs so better air flow
sry my cutting is not so perfect due using a drill :blush:
Finally got Rtx1 and Work Bench, and some stuffs :P
-
Re: Project:Dragzon Case
cut a hole so psu wires can go through
Received Some stuffs
Sleeving The Psu wires,Not Finished Sleeving yet
took off the top case part need to cut to make it as long as the centurion 5,noticed is longer abit the top case
Taking Off the top case
Cutting out the piece need to be cut
]
Very satisfied with my work today :D
really need a respray, still gotta find a way to rivet the Top Casing.
-
Re: Project:Dragzon Case
fixed cm 120mm fan behind:P
Planning to make the front panel
Took out the c5 badge from the centurion 5 front panel:p
Measuring the front panel:P
Continued
Doin some sleeving
Having Hard Time to cut 3mm arcylic :blink: ,halfway done
-
Re: Project:Dragzon Case
Cutted those bezels out
Done cutting the front panel bezel's file + wet sanding edges
Use epoxy glue to glue those sides
top panel glued, i know u can see fingerprints tomorow i will cleaned it off
Tested Fit
Update,fixin the electronic key hole
sprayed the inner part of the front panel
heres the finish product of the Front panel:P :drool:
can u see the reflections of the tiles? :thumbs: :drool:
-
Re: Project:Dragzon Case
anyway thanks,heres a close up of the front panel
sry for poor quality pics
fixed the top part arcylic,anyway gonna have a top blowhole for it and some designs later on,
close up wit better lighting
as u can see i sprayed the inner part black colour
more updates tomorow
Nothing just teaser's pics
just received
Vantec spec uv Led blue-green
2 fan grills
2mm 1ft x1ft arcylic
sidepanel.
:drool:
-
Re: Project:Dragzon Case
back under night,sry for blur pics
Still not satisfied with my top back panel.gonna redo again
Update For Today, note Tons Of pics today!
Bought some stuffs today,paint,the saw is for my project for KH [school project]
ok have a look at this pic,see the red circle i drawed,theres a gap,so im not satisfied.and i threw away the back panel arcylic!
heres what i did today redo the back panel
[img]http://img501.imageshack.us/img501/9510/img0672medium6sc.jpg[/img