Microfly Powerful but very mobile
Updated: Had to remove one dvd burner on bottom. 24 PIN was pushing drive out. Soon ill be adding sound card and Video, and adding more fan spots, still using google sketch to design water cooled microfly.
Components:
Intel Core 2 Duo E6850 Conroe Dual-Core, 3.0GHz 1333MHz
Asus P5K-VM Intel G33 Core 2 Duo 1333MHz FSB, Coolermaster Northbridge cooler, active
4x 1GB Kingston KVR800D2N5/1G 1GB PC2-6400 DDR2-800 CL5, Nexus heat spreaders
2 x Seagate 500GB Barracuda 7200.10 SATA II 7200RPM 16MB
1 x Sony AWQ170A-B2 18x6x18x Burners
EVGA Nividia 8800 Ultra 768mb
Creative Sound Blaster X-Fi XtremeGamer 7.1 Channels 24-bit 96KHz
Silverstone Strider 750w Modular Power Supply
Case:
Ultra Microfly Black w/ windows
Input Devices:
Logitec Wireless Mouse and Keyboard
Output:
HP 1440 x 900 W1907 19 "WideScreen
Logetic X-540 5.1 Surround Sound
Cooling: Ambient is approximately 32C-35C, CPU 50 Idle, 55-60C Load (converting videos) Very unhappy with temp, hope water cooling can drop it, specially since I am getting GFX card still which well block airflow and create more heat, came home today and was no a/c on at temp was way crazy 65 C to close for comfort, ambient was about 45c.
Intel Stock Heatsink, Sucks
120mm Aero cool Xtreme Turbine about 89 CFM
80mm Blue UV Sensitive 80mm Ball Bearing Fan
Re: Microfly Powerful but very mobile
Welcome to TBCS! I'm always pleased to see people jump right in with new projects. Best of luck with the new project, you'll find plenty of great modding minds here to help out along the way if ya need.
Re: Microfly Powerful but very mobile
Case Pictures by the way with top off, 7C deference...
Re: Microfly Powerful but very mobile
Going to be fun trying to get watercooling for the CPU, NB, GPU, and RAM done in there. Instead of using a 80mm radiator on the back why not just use a 120? would provide better cooling and more room (not much but some).
And welcome to TBCS :D
Re: Microfly Powerful but very mobile
Welcome to the forums.
If you want some ideas for a water cooled set up in a small case, check out the impossible modding worklog
Re: Microfly Powerful but very mobile
Which Ship?
Looking forward to seeing everything get crammed in there. :)
When I went to the Gulf in 92, I took a full sized mid-tower and monitor with me. Managed to hide it all into the angle iron above my bunk so it couldnt be seen from the floor.
Re: Microfly Powerful but very mobile
Quote:
Originally Posted by
Scotty
Going to be fun trying to get watercooling for the CPU, NB, GPU, and RAM done in there. Instead of using a 80mm radiator on the back why not just use a 120? would provide better cooling and more room (not much but some).
And welcome to TBCS :D
No room, power suply and chassis would be in the way, the spot is exactly room enough for 120mm....
Quote:
Killdrath Which Ship?
Looking forward to seeing everything get crammed in there.
On the USS Essex (LHD 2), mini carrier , what about you?
Re: Microfly Powerful but very mobile
Holy Sh@%^&#!!!!! I was on the Essex!
Welcome aboard, and thanks for your service.
Check out Sketchup to help you out with planning. Free 3D modeling program from google.
Re: Microfly Powerful but very mobile
4.5 years on the Chuck Pig, er, I mean, Carl Vinson. A 6000-man, 90,000 ton floating death trap. :)
Especially since my work space was 30 foot below water line, and my abandon stations location was at the bottom of the ship, going down with it while smashing/destroying all the classified material.
Re: Microfly Powerful but very mobile
So im going to make a case, with all this mod stuff on forums i got excited, im going to use microfly concept, but with my own taste..... Plus the microfly has poor intake and i got to 68 C while using nero to vid processs, with panels! thats way to hot, my ambient was 20c, a/c full blast.... check heatsink is on right, opened panels and increase flow air cpu temp drops down to 40c ish......
Best materials for case construction? Anyone use acrylics case panels and modified it for personal use? i would like to do that, except base.
Metal (type) or wood, or acrylics....?
Also thanks sgtm i am making my case using google sketch , ****ing rocks, i want to pay because its bext cad type software ive ever used, i prolly well apply it to use for ship maintanance layouts, instead of CADstd.