Unit 4

so the pump control is done :)

it does work.. at least i _think_ it does.. the relai works and thats all what it has to do

update time!!!!1111oneoneoneeleven
another hole

which is wayyy better than the old one :rolleyes:

now i need to close that opening

taped
and again, fibreglass :rolleyes: :D

miled the led holes

epic makro failure

cablechannel
aim

and bOOm pushbuttons insertet

dis is how it looks like from teh inside

the fibreglass is also dry

and smoooooooooth

got wires?

GIMME A HELL YEAH!!!!

my christmas gift :)

another update

this groove is for a wire, so i can hock those steel support wires in, just like in the real build

mounted the cd cover(which needs some new tiles

and the old hdd cage is mounted (need some kitbash)

quick inside overview

and the pushbutton terminal is mounted also

time to mill

action shot :O

and the finished part

this should be some kind of mega fuse construction, one of em is broken

led wire channel was milled

this is how it should look like, except the cap of the real fuse wont be visible in the finished part

_some_ wires

..and a happy new year

whoa update time Oo this is the awfull picture of my workshop

expand the pc

this is a quick dual external harddrive "mod"

sanded

polish stuff

and polished(beta ;))

this is what it roughly looks like, the old cd drive will house the circuit stuff and maybe something more^^

some kitbashing is needed and some (or alot) paint (will be flat black)

anyways real update, 2 cutting disks

cutted a channel

in there will run the wires for the led, and some space for the resistors oO

:D

red :)

GIMME A HELL YEAH!!!!!!!!! WOHOOOOOOO
i present: effective LED lighting how its be in the case 8)

the only difference between the pics is the shutter time :)

whatcha think shall i stay @ 800x600 or go back to my 640x480?

i have no invitation yet, but i know the registration is soon

the PSU FITS!(what a pain it was :dead: )

psuhbutton size increasing things (oO) made outta foam

and now HOW TO GET COOL BULLET HOLES IN MESH
first, measure the size of the entire mesh part you need

then, cut out and mark the parts youll see later, then draw on the holes

right after that youll take something round, eg a roundfile, position it above a hole and do the dew :D

finally take a drillbit or something ells to increase the size of the holes

should look like this now

and back in

and the finish with a cool handlebar :D

this _was_ my final exam project for school, a slot machine

now, rip apart the circuit and the leds

shaky? yes.

anyways, got some sweet cable and 16 ultrabright yellow leds and some solderboard
here i tested the leds for the chimney, running 4 in a row with a 470 ohm resistor @ 12V (gotta drop the resistor somewhen)

some faking, the shutterspeed was bout a second

comments?^^

paintingsession

:think::think::think:

:eek::eek:

:smoker:

:redface:

8)

:eek::eek:

:lick:

:santa::santa:

:twisted:

:D:D

:up:

:devious:

:D :rolleyes: :dead:

:alien:

and yet, a word :D the res is almost done (but not waterproof :evil: )

WEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

:banana::banana::banana::banana::banana: